Loading…
Loading…
Tender Value
₹1.3 Cr
EMD Value
₹1.3 L
Closing Date
19 Jun 2026, 6:00 pm2d left
Executive Engineer, Panchayat (R&B) Division, DAHOD
Construction of Minor Bridge on Chharchhoda Kheda Falia Road at Ch. 1/50 Ta. Garbada Dist. Dahod (Reinvited 6th Attempt)
311727
07 of 2026-2027
Open
Civil Works - Roads
Dahod
8 documents required · 8 mandatory
₹3,600
Executive Engineer, Panchayat (R&B) Division, DAHOD
₹1.3 L
6 Jun 2026
6 Jun 2026
6 Jun 2026
19 Jun 2026
6 Jun 2026
No. figures Amount
1 Providing flood gauge marks on sub structure as per design 9.00 Rmt 88.88
including painting as directed etc. complete.
2 Providing masonary steps with cement pointing on approaches as 38.00 Each 122.65
3 Providing and laying filter media 600mm as directed at the back of 654.00 Smt 659.49
abutments, returns and wing walls as per detailed specifications etc.
4 Providing and filling sand behind abutment & between returns in 512.00 Cum 268.42
layers as directed.
5 Excavation for foundation in hard murrum and boulders and very 603.00 Cum 271.97
stiff or sticky clays and other similar strata including sorting and
strutting and dewatering as necessary and disposing of excavated
stuff as directed.
6 Providing and filling in foundation with ordinary cement concrete M- 48.00 Cum 2259.51
15 mix and providing necessary vertical pin headers including
formwork, vibrating, ramming and curing complete.
7 Diversion of water course, providing cofferdam and bund or island 3.00 No. 8888.00
as may be necessary for foundation and maintaining the same for
the period as may be necessary (A) Diversion by cofferdam (V) Pier
8 Empty boring through all sorts of strata for providing 1.20m. 221.00 Rmt. 2957.04
diameter R.C.C. bored piles to required depth including providing
necessary casing pipes with all plants and equipments required etc.
complete as per specifications.
9 Providing and laying controlled cement concrete M-35 for R.C.C. 250.00 Cum 3069.48
bored piles of 1.20m dia. including ramming, vibrating and finishing
excluding reinforcement complete.
10 Providing and placing in position I.S.I. mark reinforcement (T.M.T.) 112.00 M.T. 39497.89
of grade Fe-500D for following items including cutting, bending,
hooking, tying etc. complete as per detailed drawings and
specifications for various structural components.
11 Load testing of foundation piles including loading with necessary 2.00 No. 36640.88
kentledge or any other suitable method as per detailed.
12 Performing Integrity Test (low strain) on vertical pile. The item shall 16.00 No. 1066.56
include chipping of weak concrete at the top of pile, leveling,
bending of reinforcing bars, preparation of pile head including
testing with pile driving analyser or approved equivalent. To be
carried out at least 15 days after concreting of piles. A specialist
approved Agency shall be employed by the Contractor for the test.
The test shall be carried out as per relevant ASTM code. The item is
including complete testing with approved apparatus, analysis of
results and conclusions including submission of test reports in three
hard copies with soft copy in CD.
It. Rate in Total
Description of Item Qty. Unit
No. figures Amount
13 Providing and casting in situ controlled cement concrete M-35 for 207.00 Cum 3163.69
R.C.C. piles cap including necessary form work, vibrating, curing
and finishing complete.
14 Providing and casting in situ controlled cement concrete M-30 for 91.00 Cum 3204.66
R.C.C. raft (footing pad) and cutt-off including necessary shuttering,
laying, vibrating, ramming and curing complete.
15 Chipping and dressing of the RCC piles upto cut-off level including 20.00 Cum 495.06
cleaning of reinforcement and removal of dismantled materials etc.
for providing pile caps as directed by Engineer and as per
specification.
16 Providing Steel Liner 6 mm thick for pile including fabricating and 8.00 M.T. 39327.62
setting out as per detailed drawing.
17 Providing and laying weep holes in abutment and returns by using 654.00 Each 46.13
A.C. / P.V.C. pipes of 100 mm. including laying in proper grade and
jointing the completed as per directed specification.
18 Providing and casting in situ controlled cement concrete M-30 for 172.000 Cum 3124.67
R.C.C. work in piers, abutments & R.C.C. box return as per drawing
including centering, shuttering, scaffolding where necessary laying,
vibrating, curing and finishing complete for (A) Height from 0.0 mt. to
19 Providing and casting in situ controlled cement concrete M-30 mix 41.00 Cum 3170.89
for R.C.C. work in pier cap, abutment cap and dirt wall including
controlled cement concrete M-35 bed blocks or pedestals of
required size below bearings as per detailed drawings including
centering, shuttering, scaffolding wherever necessary laying,
vibrating, curing and finishing complete.
20 Providing and fixing in position Fe-500D steel dowel bars (I.S.I. 16.00 Each 287.16
mark) in pier caps or abutments caps for anchorage in fixed end as
per detailed drawing including cutting, bending and welding
21 Providing and fixing in position Fe-500D steel dowel bars (I.S.I. 16.00 Each 397.50
mark) in pier caps or or abutments caps for anchorage in free end
as per detailed drawing including cutting, bending and welding
22 Providing & fixing in position tar paper bearings as per detailed 1.00 Job 13332.00
design and drawings and specifications etc. complete.
23 Providing and casting in situ controlled cement concrete M-30 for 153.00 Cum 3259.77
R.C.C. Solid slab including centering, scaffolding, curing and
finishing complete.
24 Providing and casting in situ controlled cement concrete M-30 for 22.40 Cum 3330.87
average 100mm thick wearing coat laid as directed including
tamping, vibrating, finishing, curing and filling in joints with bitumen
etc. complete.
It. Rate in Total
Description of Item Qty. Unit
No. figures Amount
25 Reinforced Cement Concrete Crash Barrier (Provision of an 74.00 Rmt. 3046.30
Reinforced cement concrete crash barrier at the edges of the road,
approaches to bridge structures and medians, constructed with M-
40 grade concrete with TMT reinforcement conforming to IRC:21
and dowel bars 25 mm dia, 450 mm long at expansion joints filled
with pre-moulded asphalt filler board, keyed to the structure on
which it is built and installed as per design given in the enclosure to
MOST circular No. RW/NH - 33022/1/94-DO III dated 24 June
as per dimensions in the approved drawing and at locations as
directed by the Engineer, all as specified) etc. complete (A) Only
crash barrier.
26 Providing P.V.C. 100mm dia. water spouts including necessary iron 8.00 No. 165.32
grating as per detailed drawing including placing etc. complete.
27 Providing and fixing marble slab including engraving letters, 2.00 No. 840.80
numbers and painting etc. complete. (A) size 75 cm x 60 cm x 4 cm.
28 Providing and casting in situ controlled cement concrete M-30 for 21.00 Cum 3223.33
approach slab including form work, curing and finishing etc.
29 Providing and fixing metal expansion joints as per drawings. Details 26.00 Rmt. 1335.87
of expansion joint 50 x 50 x 6mm size two IS and 100 x 6mm MS
plate with 6 x 20 x 25mm long hold fast @ 50 cm / cc on both sides
of expansion joints.
30 Providing and applying one primer coat and two coats of Synthetic 111.00 Sq.m. 63.99
enamel paint on R.C.C. crash barrier and Median verge surface
area exposed to atmosphere including marking of strip of two colors
including cost of material, labour, transportation, scaffolding and
preparing the surface by cleaning, washing, brushing, sand/grit
blasting etc. complete and as directed by Engineering and as per
specification.
31 Providing Designing Supplying and Installation of Extruded Bi-Axial 648.00 Sq.m. 115.37
Polypropylene 30 kn GeoGrid including all labours & etc. complete
32 Earth work for embankment including breaking clods, dressing with 2451.00 Cum 161.41
all lead and lift including watering and consolidation (C) from borrow
area within all lead and lift.
33 Providing & laying compacted WBM Grading-II using MCBT metal 241.88 Cum 820.36
of size 45mm to 63mm in required layers including using 16% stone
screening, 13.2mm size and 8% stone dust as filler including
spreading, watering and consolidation by vibratory roller as per
MORTH specification etc complete as directed by Engineer in
34 Providing and filling in foundation with ordinary cement concrete M- 203.00 Cum 1857.59
100 mix and providing necessary vertical pin headers including
formwork, vibrating, ramming & curing complete.
35 Providing and casting in situ ordinary cement concrete M-250 for CC 323.00 Cum 2466.31
Road pavement including formwork curing and finishing complete.
36 Providing trimixed machine for leveling smooth, finishing including 1613.00 Sq.m. 53.33
channel fixing electric supply etc. & dewatering of excess water
through vacume pump including transporting of machine etc.
complete as directed.
It. Rate in Total
Description of Item Qty. Unit
No. figures Amount
37 Providing I.S.I. mark T.M.T. bar Fe-415 reinforcement for R.C.C. 8880.00 Kg. 39.28
work including bending, binding and placing in position upto floor
two level.
38 Excavation for foundation upto 1.50 mt. depth including sorting out 163.00 Cum 135.10
and stacking of useful material and disposing off the excavated stuff
within all lead and lift for dense or hard soil.
39 Excavation for foundation upto 1.50 mt. depth including sorting out 82.00 Cum 230.20
and stacking of useful material and disposing off the excavated stuff
within all lead and lift for Hard murrum.
40 Providing and casting in situ ordinary cement concrete M-150 mix 439.00 Cum 2279.70
and providing necessary pin headers including shuttering,
scaffolding, laying, vibrating, curing and finishing complete without
‘V‘ grooves (A) Height from 0.0 to 5.0 mt.
41 Providing and placing in position I.S.I. mark Fe-415 T.M.T. bar for 2.50 M.T. 39294.74
following items including cutting, bending, hooking and tying
complete as per detailed drawings for well :- curb, staining cap and
dirt wall.
42 Filling available excavated earth (excluding rock) in trenches, plinth, 245.00 Cum 68.00
sides of foundation etc. in layers not exceeding 20 cm. in depth
consolidating each deposited layers by ramming and watering.
Total Rs.
i.e. Rs. One Crore, Thirty One Lacs, Fourty Six Thousand, Four hundred Seventy Four only
I/We am/are willing to carry out the work @ ______________ % above/below percent (Should be written
in figures and words) of the estimated rate mentioned above. Amount of my /our tender works out as under.
Estimated amount put to tender Estimated amount put to tender
Deduct………% below Add………% Above
Net Rs. ___________________________ Total Rs. ________________________
In words ____________________ In words ____________________
1. The Contractor shall exhibit a board with detailed specification and details of work as directed by the Engineer-In-Charge
for which no extra payment shall be made.
2. The labour cess will be deducted as per prevailing rules i.e. 1% of the work done.
3. GST and Income tax TDS will be deducted at a source while making payments of bills.
4. In all R.C.C. Items in Rate Analysis Standard Cement Consumption has been taken as per Govt. G.R.: PRC-10/2017
Cement Consumption/16/C, Date:11/05/2017 as stated in S.O.R. therefore in R.C.C. items where there is a change as per
actual mix design the cost of difference of cement consumption have been deducted from the rate of original item at the
rate of input rate mentioned in all the tender.
Above all items of "Schedule-B" with Item Description, Unit, Rate & Amount have verified by me and found
Deputy Executive Engineer Sr. Divisional Account Officer Executive Engineer
Panchayat (R & B) Sub Division, Panchayat (R & B) Division, Panchayat (R & B) Division,
Dahod Dahod Dahod
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
RAW_HTML
MMGSY ENVIRONMENT GR new.pdf
GR for Inspection 16.10.2025.pdf
GR for Mix Design 16.10.2025.pdf
BOQ.pdf
Drawings.pdf
General Techical Specifications.pdf
GRs - Special Conditions - MMGSY.pdf
Specification Index.pdf
SBD Book - Constn Slab drian Charchoda Kheda 6th.pdf
Download all tender documents and submit your bid