Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹9.8 LAccepted-AOC | ₹9.8 L | L1 | Accepted-AOC L1 Agency |
| 2 | L2₹9.8 L+₹690.50 (0.07%)Rejected-Finance | ₹9.8 L+₹690.50 (0.07%) | L2 | Rejected-Finance Higher |
| 3 | L3₹10.1 L+₹25,203.14 (2.56%)Rejected-Finance | ₹10.1 L+₹25,203.14 (2.56%) | L3 | Rejected-Finance Higher |
| 4 | L5₹10.2 L+₹30,727.11 (3.12%)Rejected-Finance | ₹10.2 L+₹30,727.11 (3.12%) | L5 | Rejected-Finance Higher |
Tender Value
₹6.9 L
Closing Date
12 May 2026, 2:00 pmClosed
Registrar NIT Silchar
Registrar NIT Silchar
Construction of sheds for car, bike and cycle for new library building at NIT Silchar.
2026_NS_907619_1
NIT/Estate/Limited/2026-27/01 Sl. No. 09
Limited
Civil Works
Percentage
NIT Silchar
Please refer Tender documents.
2 documents required · 2 mandatory
₹0
Exempted
21 Aug 2026
6 May 2026
13 May 2026
6 May 2026
12 May 2026
6 May 2026
This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, for all lift, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. All kinds of soil | 9.28 | Cum | 270.71 | ₹2,512.21 |
| 2 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:1½:3 (1 Cement: 1½ coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources) | 3.21 | Cum | 8,674.48 | ₹27,845.09 |
| 3 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:3:6 (1 Cement : 3 coarse sand (zone-III) derived from natural sources : 6 graded stone aggregate 20 mm nominal size derived from natural sources) | 0.3 | Cum | 7,586.49 | ₹2,275.95 |
| 4 | Centering and shuttering including strutting, propping etc. and removal of form work for : Foundations, footings, bases for columns | 27.85 | Sqm | 407.84 | ₹11,358.23 |
| 5 | Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. | 2,996.7 | Kg | 139.05 | ₹4,16,685.14 |
| 6 | Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-Charge) of total coated thickness 0.50 mm (base metal of minimum 0.45 mm thickness with total coating thickness of 0.05mm) with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. | 246.08 | Sqm | 768.2 | ₹1,89,037.67 |
| 7 | Providing and fixing precoated galvanised steel sheet roofing accessories of total coated thickness 0.50 mm (base metal of minimum 0.45 mm thickness with total coating thickness of 0.05 mm) with Zinc coating 120 gram per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screws complete : Ridges plain (500 - 600mm) a) Ridges plain (500 - 600mm) | 22.1 | Meter | 553.64 | ₹12,235.53 |
| 8 | b)Crimp curve | 21 | Sqm | 516.62 | ₹10,849.02 |
| 9 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade : Two or more coats on new work | 109.18 | Sqm | 162.1 | ₹17,698.08 |
stage.html
html • 0.04 MB
tech_eval.pdf
fin_eval.pdf
aoc.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 6.72 MB
BOQ_953976.xls
BOQ • 0.24 MB
Termsconditions.pdf
Additional Documents • 1.15 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .