Construction of Pavillion cum changing room, lighting facilities, sprinkler system for existing cricket ground, development of football ground, renovation of existing pavilion and other external development works for RSP at Rourkela

Total Amount 5,72,11,316.00

Providing and laying in position specified grade of reinforced cement concrete,

5.1 excluding the cost of centering, shuttering, finishing and reinforcement - All work up to

1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) derived from natural sources : 3 graded

stone aggregate 20 mm nominal size de rived from natural sources) Cum 105.36 9045.75 9,53,060.22

Centering and shuttering including strutting, propping etc. and removal of form for

5.9.1 Foundations, footings, bases of columns, etc. for mass concrete sqm 215.00 392.15 84,312.25

Walls (any thickness) including attached pilasters, butteresses, plinth and string

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing

5.22.6 in position and binding all complete upto plinth level.

Thermo-Mechanically Treated bars of grade Fe-500D or more. kg 10,536.00 107.85 11,36,307.60

Providing and fixing factory made precast RCC perforated drain covers, having

concrete of strength not less tha M-25, of size 1000 x 450 x 450 mm, reinforced with

23.9 8 mm dia four nos longitudinal & 9 nos cross sectional T.M.T. Hoop bars, including

providing 50 mm dia perforations @ 100 to 125 mm c/c, including providing edge

binding with M.S. flats of size 50 mm x 1.6 mm complete, all as per direction of Each 130.00 1399.95 1,81,993.50

Engineer-in-Charge.

Kota stone slab flooring over 20 mm (average) thick base laid over and jointed grey

cement slurry mixed with pigment to match the shade of the slab, including rubbing

and polishing complete with base of cemennt mortar 1:4 (1 cement : 4 coarse sand):

Digitally signed by JAYA

Kota stone slabs 20 mm thick in risers of steps, skirting, dado and pillars laid on 12

mm (average) thick cement mortar 1:3 (1 cement : 3 coarse sand) and jointed with

grey cement slurry mixed with pigment to match the shade of the slabs, including

rubbing and polishing complete. Sqm 45.00 2354.7 1,05,961.50

Providing and fixing G.I. pipes complete with G.I. fittings including trenching and

18.12.7 65 mm dia nominal bore meter 30.00 896.6 26,898.00

18.12.5 40 mm dia nominal bore meter 40.00 617.05 24,682.00

18.12.4 32 mm dia nominal bore meter 100.00 540.3 54,030.00

Providing and fixing gun metal gate valve with C.I. wheel of approved quality

(screwed end) :

18.17.3 40 mm nominal bore each 1.00 826.1 826.10

18.17.2 32 mm nominal bore each 4.00 689.6 2,758.40

Excavating, supplying and filling of local earth (including royalty) by mechanical

transport upto a lead of 5km also including ramming and watering of the earth in

layers not exceeding 20 cm in trenches, plinth, sides of foundation etc. complete.

Providing and fixing football goal post of size 24 x 8 feet made of steel in white color

Acrylic distemper paint for Ground marking lines including marking in all respect as

per direction of Engineer in charge Job 1.00 37687.00 37,687.00

Total Civil work 99,37,625.64 2,70,663.00

b Horticulture Works

Supplying and stacking at site dump manure from approved source, including

carriage upto 5 km lead complete (manure measured in stacks will be reduced by 8%

for payment) : Screened through sieve of I.S. designation 4.75 mm

2.9 Mixing earth and sludge or manure in proportion specified or directed [8:1] Cum 3,200.00 36.55 1,16,960.00

2.8 Spreading of sludge, dump manure or/and good earth in required thickness (Cost of

sludge, dump manure or/ and good earth to be paid separately). Cum 3,200.00 52.35 1,67,520.00

Grassing with grass including watering and maintenance of the lawn for 30 days or

more till the grass forms a thick lawn free from weeds and filt for mowing including

supplying good earth if needed (the good earth shall be paid for separately).

Providing Selection no. 1 doob grass turf with earth 50mm to 60mm thickness of

existing ground prepared with proper level and ramming with required tools wooden

and than rolling the surface with light roller make the surface smoothen and light

watering the same maintenance for

30 days or more till the grass establish properly,as per direction of officer in charge

Total Horticulture Works 23,49,057.20

Digitally signed by JAYA

DSR Code-23 Description of Indicative Items Unit Qty Rate DSR-23

1 CARRIAGE OF MATERIAL

1.1 By Mechanical Transport including loading,unloading and stacking

1.1.2 Carriage of earth

Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30

2.6 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth

lead upto 50 m and lift upto 1.5 m, as directed by Engineer-in-charge.

2.8 Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches

or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of

bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as

directed, within a lead of 50 m.

2.8.1 All kinds of soil.

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not

2.25 exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and

4.1.8 1:4:8 (1 Cement : 4 coarse sand (zone-III) : 8 graded stone aggregate 40 mm nominal size) cum 81.00 6812.00 5,51,772.00

Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone

aggregate 20 mm nominal size) over 75mm thick bed of dry brick ballast 40 mm nominal size, well rammed

and consolidated and grouted with fine sand, including necessary excavation, levelling & dressing & finishing

the top smooth. Sqm

Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering,

shuttering, finishing and reinforcement - All work up to plinth level :

1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm

nominal size de rived from natural sources) Cum 162.00 9045.75 14,65,411.50

Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings,

balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth

5.3 level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3

(1 cement : 1.5 coarse sand(zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal

size derived from natural sources). Cum 252.00 11505.50 28,99,386.00

5.9 Centering and shuttering including strutting, propping etc. and removal of form for all heights :

5.9.1 Foundations, footings, bases of columns, etc. for mass concrete Sqm 81.00 392.15 31,764.15

Digitally signed by JAYA

5.9.5 Lintels, beams, plinth beams, girders, bressumers and cantilevers. Sqm 364.50 736.40 2,68,417.80

5.9.6 Columns, Pillars, Piers, Abutments, posts and Struts Sqm 518.40 961.30 4,98,337.92

5.9.7 Stairs, (excluding landings) except spiral-staircases. Sqm 172.80 764.95 1,32,183.36

5.9.19 Weather shade, chajjas, corbels etc. including edges. Sqm 11.25 951.10 10,699.88

5.9.20 Suspended floors, roofs, landings, balconies and access platform with water proof ply 12 mm thick Sqm 562.50 1,028.40 5,78,475.00

5.22 Reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all

complete upto plinth level

5.22.6 Thermo-Mechanically Treated bars of grade Fe-500D or more. kg 15572.641 107.85 16,79,509.33

5.22 A Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all

complete above plinth level.

5.22A.6 Thermo-Mechanically Treated bars of grade Fe-500 D or more. kg 24579.315 107.85 26,50,879.12

Brick work with common burnt clay F.P.S (non-modular) bricks of class designation 7.5 in foundation and

6.1.2 Cement mortar 1:6 (1 Cement : 6 coarse sand) Cum 72.45 7132.25 5,16,731.51

Brick work with non modular fly ash bricks conforming to IS:12894, class designation 10 average compressive

6.34 strength in super structure above plinth level up to floor V level in :

6.34.2 Cement mortar 1:6 (1 cement : 6 coarse sand) Cum 183.53 8752.55 16,06,322.24

6.44 Brick edging 7cm wide 11.4 cm deep to plinth protection with common burnt clay F.P.S. (non modular) bricks

of class designation 7.5 including grouting with cement mortar 1:4 (1 cement : 4 fine sand). Mtr

Providing and fixing 1st quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by

the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size

as approved by Engineer-in-charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement

mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @3.3 kg per sqm, including pointing

in white cement mixed with pigment of matching shade complete.

Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for

kitchen platforms, vanity counters, window sills , facias and similar locations of required size, approved shade,

colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated

with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and

polishing to edges to give high gloss finish etc. complete at all levels.

8.2.2 Granite stone slab of colour black, Cherry/ Ruby red

8.2.2.2 Area of slab over 0.50 sqm Sqm 5.47 5136.3 28,105.83

Providing and fixing ISI marked oxidised M.S. tower bolt black finish, (Barrel type) with necessary screws etc.

complete (Copper oxidised as per IS 1378)

Providing and fixing IS:12817 marked stainless steel butt hinges with stainless steel screws etc. complete:

Digitally signed by JAYA

Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round

bars etc. including priming coat with approved steel primer all complete

9.48.1 Fixed to steel windows by welding kg 583.20 219.1 1,27,779.12

Providing and fixing ISI marked 85x42 mm oxidised M.S. pull bolt lock conforming to IS: 7534 with necessary

screws bolts, nut and washers etc. complete (Copper oxidised as per IS 1378) Each 10.00 122.15 1,221.50

Providing and fixing bright finished brass hanging type floor door stopper with necessary screws, etc.

complete. each 10.00 121.65 1,216.50

Providing and fixing ISI marked oxidised M.S. tower bolt black finish, (Barrel type) with necessary screws etc.

9.127 Providing & Fixing decorative high pressure laminated sheet of plain / wood grain in gloss / matt / suede finish

with high density protective surface layer and reverse side of adhesive bonding quality conforming to IS : 2046

Type S, including cost of adhesive of approved quality.

Providing and fixing factory made uPVC glazed/ wire mesh windows/ doors comprising of lead free uPVC

multichambered frame, sash and mullion/ coupler (wherever required) extruded

profiles having minimum wall thickness of 1.70 mm for Series R1 and R2 profiles and 2.10 mm for Series R3

and R4 profiles conforming to EN: 12608 in any shape, colour and design duly reinforced with galvanized mild

steel section made of required shape & size as per CPWD Specification, uPVC extruded glazing beads,

interlocks and Inline sash adaptor (wherever required) of appropriate dimension, EPDM gasket, hardware, SS

304 grade fasteners of minimum 8 mm dia. with countersunk head, comprising of matching polyamide PA6

grade sleeve for fixing frame to finished wall as per IS 1367 : Part 1 to 14, plastic packers, plastic caps and

necessary stainless steel screws etc. Profile of frame, sash & mullion (if required) shall be mitred cut and

fusion welded/mechanically jointed duly sealed at all corners, including drilling of holes for fixing hardware and

drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with

weather proof silicon sealant over backer rod of approved size and quality, all complete as per approved

drawing conforming to CPWD specification & direction of Engineer-in-Charge. Section of steel reinforcement

and cross sections of uPVC profiles to be as per design approved by Engineer-in-Charge. Wire mesh/ Glazing

of plain/ toughened/ laminated/ double glass unit with/ without high performance coatings as per design

requirements and conforming to IS: 3548 & IS: 16231 shall be paid separately Note:- Structural design proof

checked from a Government Engineering Institute, to be provided by the manufacturer for :

(i) Sites with basic wind speed > 45 m/sec as per IS 875 Part 3

(ii) Sites with structure height more than 20m for all wind speeds.

Two track two panels sliding window with Aluminiumchannel for roller track, wool pile, nylon rollers with SS

Using R2 series with frame (40mm & above) x (40mm & above) & sash (25mm & above) x (50mm & above)

with zinc alloy (zamak) powder coated touch locks with hook (Height upto 1.2 meter). Sqm 56.70 8298.85 4,70,544.80

Digitally signed by JAYA

Fixed window/ ventilator without mullion/ Transom

9.147C1.2 Using R2 series with frame (39mm & above) x (39mm & above). (Height upto 1.2 meter) Sqm 7.20 8054.75 57,994.20

Providing and fixing zinc alloyed (white powder coated) touch lock for uPVC sliding window with necessary

screws etc. complete. Each 8.00 204 1,632.00

9.151 Providing and fixing steel roller for uPVC sliding window with necessary screws etc. complete. Each 8.00 115.8 926.40

Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors,

windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or

9.7 rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick :

Float glass panes

9.7.7.2 5.0 mm thick glass panes (weight not less than 12.50 kg/sqm). Sqm 63.90 2600.45 1,66,168.76

Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic

moulded frame of approved make and shade with 6 mm thick hard board backing:

17.32.4 rectangular shape 1500x450 mm Each 6.00 2093 12,558.00

Providing and fixing carbon steel galvanised ( minimum coating 5 micron) dash fastener of 10 mm dia double

threaded 6.8 grade (yield strength 480 N/mm2), counter sunk head, comprising of 10 m dia polyamide PA 6

grade sleeve, including drilling of hole in frame , concrete/ masonry, etc. as per direction of Engineer-in-

Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting,

10.16 hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted

with special shaped washers etc. complete.

10.16.1 Hot finished welded type tubes kg 23,805.00 194.4 46,27,692.00

Kota stone slab flooring over 20 mm (average) thick base laid over and jointed grey cement slurry mixed with

11.26 pigment to match the shade of the slab, including rubbing and polishing complete with base of cemennt mortar

1:4 (1 cement : 4 coarse sand):

Kota stone slabs 20 mm thick in risers of steps, skirting, dado and pillars laid on 12 mm (average) thick

11.27 cement mortar 1:3 (1 cement : 3 coarse sand) and jointed with grey cement slurry mixed with pigment to match

the shade of the slabs, including rubbing and polishing complete. Sqm 192.62 2354.7 4,53,567.02

Digitally signed by JAYA

Providing and Laying Vitrified tiles in floor in different sizes (thickness to be specified by the manufacturer) with

water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all

colours and shade, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand) jointing with grey cement

11.41A slurry @3.3 kg/sqm including grouting the joints with white cement and matching pigments etc. the tiles must

be cut with the zero chipping diamond cutter only. Laying of tiles will be done with the notch trowel, piler,

wedge, clips of required thickness, levelling system and rubber mallet for placing the tiles gentle and easily.

11.41A.1 Double charge vitrified tile polished finish of size

11.41A.3 Glazed Vitrified tiles Matt/ Antiskid finish of size

Providing corrugated G.S. sheet roofing including vertical / curved surface fixed with polymer coated J or L

hooks, bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled

with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of

complete (up to any pitch in horizontal/ vertical or curved surfaces), excluding the cost of purlins, rafters and

trusses and including cutting to size and shape wherever required.

0.80 mm thick with zinc coating not less than 275 gm/m² sqm 540.00 1257.55 6,79,077.00

Providing valleys of 90 cm wide overall in plain G.S. sheet fixed with polymer coated J, or L hooks, bolts and

12.5.1 nuts 8 mm dia G.I. limpet and bitumen washers complete : 1.60 mm thick with zinc coating not less than 350

Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A,

including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion,

(i) Single socketed pipes.

12.41.2 110 mm diameter -

Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC

12.42 rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382,

leaving 10 mm gap for thermal expansion. -

Digitally signed by JAYA

Providing and fixing 15 mm thick densified tegular edged eco friendly light weight calcium silicate false ceiling

tiles of approved texture of size 595 x 595 mm in true horizontal level, suspended on inter locking metal grid of

hot dipped galvanised steel sections (glavanising @ 120 grams per sqm including both side) consisting of

main 'T' runner suitably spaced at joints to get required length and of size 24x38 mm made from 0.33 mm thick

(minimum) sheet, spaced 1200 mm centre to centre, and cross 'T' of size 24x28 mm made out of 0.33 mm

(minimum) sheet, 1200 mm long spaced between main 'T' at 600 mm centre to centre to form a grid of

1200x600 mm and secondary cross 'T' of length 600 mm and size 24x28 mm made of 0.33 mm thick

(minimum) sheet to be inter locked at middle of the 1200x600 mm panel to form grid of size 600x600 mm,

resting on periphery walls/partitions on a perimeter wll angle pre-coated steel of size (24x24x3000 mm made

of 0.40 mm thick (minimum) sheet with the help of rawl plugs at 450 mm centre to centre with 25 mm long dry

wall screws @230 mm interval and laying 15 mm thick densified edgescalcium silicate ceiling tiles of approved

12.53 texture in the grid, including cutting/ making opening for services like diffusers, grills, light fittings, fixtures,

smoke detectors etc., wherever required. Main 'T' runners to be suspended from ceiling with 12.5 mm dia and

50 mm long dash fasteners, 4 mm G.I. adjustable rods with glavanised steel level clips of size 85 x 30 x 0.8

mm, spaced at 1200 mm centre to centre along main 'T'. Bottom exposed with 24 mm of all T-sections shall

be pre-painted with polyster baked paint, for all heights, as per specifications, drawings and as directed by

Engineer-in-charge. note: Only calcium silicate false ceiling area will be measured from wall to wall. No

deduction shall be made for exposed frames/opening (cut outs) having area less than 0.30 sqm. The calcium

silicate ceiling tile shall have NRC value of 0.50 (minimum), light reflection>85%, non-combustible as per B.S.

476 part IV, 100% humidity resistance and also having thermal conductivity <0.043 w/mK.

13.1 12 mm cement plaster of mix :

18mm cement plaster in two coats under layer 12mm thick cement plaster 1:5 (1 cement :5 coarse sand ) and

13.12 a top layer 6mm thick cement plaster 1:3 (1 cement :3 coarse sand ) finished rough with sponge

13.42 Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of

approved manufacturer, of required shade and colour complete, as permanufacturer’s specification.

13.42.1 Two or more coats on new work Sqm 791.40 142.8 1,13,011.92

13.43 Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface :

13.43.1 Water thinnable cement primer

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and

13.80 manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.

Digitally signed by JAYA

13.46 Finishing walls with Acrylic Smooth exterior paint of required shade:

New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer

applied @0.90 litre/10 sqm) Sqm 691.20 160.6 1,11,006.72

13.61 Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :

13.61.1 Two or more coats on new work Sqm 2,520.00 155.9 3,92,868.00

Dismantling old plater or skirting raking out joints and cleaning the surface for plaster including disposal of

rubbish to the dumping ground within 50 meters lead Sqm 2,080.00 54.65 1,13,672.00

Demolishing brick work manually/ by mechanical means including stacking of serviceable material and

disposal of unserviceable material within 50 meters lead as per direction of Engineer-in-Charge

Providing and fixing 12 mm thick frameless toughned glass door shutter of approved brand and manufacture,

including providing and fixing top and bottom pivot and double acting hydraulic floor spring type fixing

21.18 arrangement and making necessary holes etc. for fixing required door fittings, all complete as per direction of

Engineer-in-charge (Door handle, lock and stopper etc. to be paid separately).

Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid

door/window/Ceosetory windows & other Frames/Chowkhat comprising of virgin PVC polymer of K value 58-

60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non

toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC

26.86 solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of

750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of

58N/mm2, modulus of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with

property of being termite/borer proof, water/moisture proof and fire retardant and fixed in position with M.S hold

fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-In- Charge. (M.S

26.86.6 hold fast/lugs

Frame size 65orx SS

mm fasteners shall be paid for separately).Note: For WPC solid door/window frames, Meter 68.40 1381.6 94,501.44

Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid plain flush door

shutter of required size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate

and natural fibres (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12

for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (face) & 900 N

(Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread

of flame of Class A category with property of being termite/ borer proof, water/moisture proof and fire retardant

and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed

counter sunk S.S screws, all as per direction of Engineer-in-Charge. (Note: stainless steel butt hinges and

necessary S.S screws shall be paid separately)

Cricket Fencing

Digitally signed by JAYA

Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a

priming coat of approved steel primer using structural steel etc. as required.

10.25.2 In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works Kg 10,080.00 172.60 17,39,808.00

Painting with Epoxy paint (two or more coats) at all locations prepared and applied as per manufacturer's

13.52 specifications including appropriate priming coat, preparation of surface, etc. complete.

Preparation and consolidation of sub grade with power road roller of 8 to 12 tonne capacity after excavating

earth to an avergae of 22.5 cm depth, dressing to camber and consolidating with road roller including making

good the undulations etc. and re-rolling the sub grade and disposal of surplus earthwith lead upto 50 meters.

16.68 Providing and laying 60mm thick faciory made cement concrete interlocking paver block of M -30 grade made

by block making machine with strong vibratory compaction, of approved size, design & shape, laid in required

colour and pattern over and including 50mm thick compacted bed of coarse sand, filling the joints with line

sand etc. all complete as per the direction of Engineer-in-charge. 1,300.00 972.00 12,63,600.00

16.69 Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in

position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand),

including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than

5mm), including making drainage opening wherever required complete etc. as per direction of Engineer-in- cum

charge (length of finished kerb edging shall be measured for payment). (Precast C.C. kerb stone shall be

by Engineer-in-charge). 21.60 10117.60 2,18,540.16

16.70 Providing and fixing G.I. chain link fabric fencing of required width in mesh size 50x50 mm including

strengthening with 2 mm dia wire or nuts, bolts and washers as required complete as per the direction of

Engineer-in-charge. -

16.70.2 Made of G.I. wire of dia. 4 mm, PVC coated to achieve outer dia not less than 5 mm in required colour and

16.93 Providing and placing in position 100 mm thick factory made machine

batched & machine mixed Precast RCC Rectangular Covers on drains of footpath of various sizes, of M-25

grade cement concrete for RCC work, including cost of centering, shuttering, reinforcement of 8 mm dia TMT

bars of Fe 500 grade @ maximum 100mm c/c on both ways , neat cement punning on finished surface,

properly encased on all edges with 1.6 mm thick , 100 mm wide MS sheet duly painted over priming coat ,

reinforcement to be welded at edges with MS sheet and providing 2 Nos. 12 mm dia bar for hooks etc i/c cost

of cartage, all leads & lift, handling at site etc. all complete as per direction of Engineer-in-Charge.

Digitally signed by JAYA

Cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 40 mm nominal size) in

pavements, laid to required slope and camber in panels as required including consolidation finishing

and tamping complete.

Laying, spreading and compacting stone aggregate of specified sizes to WBM specifications in uniform

thickness, hand picking, rolling with 3 wheeled road/vibratory roller 8-10 tonne capacity in stages to proper

grade and camber, applying ad brooming requisite type of screening / binding material to fill up interstices of

coarse aggregate, watering and compacting to the required density. Cum 40.50 1046.95 42,401.48

Total of Schedule Items 3,17,11,130.16

Providing and fixing Toilet Paper Holder size 335.3 × 363.2 × 210.8 cm, metal construction Includes

installation hardware compelte in all respect Each 6.00 750.0 4,500.00

NSI 2 Plastic Chairs in HDPE material Nos 450.00 2855.0 12,84,750.00

NSI 3 VIP Cabin Chairs Nos 30.00 5579.0 1,67,370.00

Providing and fixing 12 mm thick frameless toughned glass partition of approved brand and manufacture,

NSI 4 including providing and fixing patch fittings all complete as per direction of Engineer-in-charge.

Providing & fixing 450mm deep box type MS powder coated of approved shade lockers of size 450x450 mm

NSI 5 made from 18 gauge MS sheed with suitable locing arrangement in layers. Complete in all respect as per

direction of Engineer in charge

Providing and fixing one pair of chrome finished door handle 600 mm ling, two number of hydraulic floor spring

NSI 6 of approve make and one floor lock for 12 mm thick frameless toughned glass door shutter complete in all

respect as per direction of Engineer-in-charge. set 1 22886 22,886.00

Total of Non Schedule Items 22,70,211.11

Total (Schedule + Non Schedule) Items 3,39,81,341.27

Digitally signed by JAYA

PROJECT- : ESTIMATE FOR CRICKET PAVILLION

SCHEDULE OF QUANTITIES FOR SUPPLY, ERECTION, TESTING AND COMMISSIONING

ELECTRICAL WORKS (AS PER DSR 2022)

AS PER DSR-2022 AS PER MARKET RATE

S.NO DESCRIPTION OF ITEM UNIT QTY. AMOUNT AMOUNT

ITEMS RATE (RS.) RATE (RS.)

SUBHEAD- I: DISTRIBUTION BOARD

Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 V, on

1 2.3 surface/ recess complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder

painted including earthing etc. as required. (But without MCB/RCCB/Isolator)

Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution board,

2 2.4 415 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar,

interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/ Isolator)

Supplying and fixing following rating, double pole, 240 volts, isolator in the existing MCB DB complete with

connections, testing and commissioning etc. as required.

Supplying and fixing following rating, four pole, 415 volts, isolator in the existing MCB DB complete with

connections, testing and commissioning etc. as required.

Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, "C" curve, miniature circuit breaker suitable for

6 2.10 inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning

etc. as required.

e) 2.11 Supplying and fixing single pole blanking plate in the existing MCB DB complete etc. as required. Nos. 10.00 13.00 130.00

Supplying and fixing following rating, double pole, single phase and neutral, 240 volts, residual current circuit

7 2.14 breaker ( RCCB), having a sensitivity current upto 30 milliamperes in the existing MCB DB complete with

connections, testing and commissioning etc as required.

Supplying and fixing following rating, four pole, three phase and neutral, 415 volts, residual current circuit

8 2.15 breaker ( RCCB), having a sensitivity current upto 30 milliamperes in the existing MCB DB complete with

connections, testing and commissioning etc as required.

Total carried over to Summary 40,699.00 0.00

SUB-HEAD - II : INTERNAL WIRING

Digitally signed by JAYA

1 Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper

conductor single core cable in surface / recessed steel conduit, with modular switch, modular plate, suitable GI

box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as

Wiring for group controlled (looped) light point/fan point/exhaust fan point/ call bell point (without independent

switch etc.) with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed steel

2 1.54 conduit, and earthing the point with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable etc. as

3 Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper

1.7 conductor, single core cable in surface/ recessed steel conduit as required.

c) 1.7.3 2 X 4 sq. mm + 1 X 4 sq. mm earth wire Metre 180.00 428.00 77,040.00

d) 1.7.4 2 X 6 sq. mm + 1 X 6 sq. mm earth wire Metre 40.00 589.00 23,560.00

e) 1.7.5 2 X 10 sq. mm + 1 X 6 sq. mm earth wire Metre 10.00 710.00 7,100.00

j) 1.7.11 4 x 16 sq.mm + 2 x 6 sq.mm. earth wire Metre 0.00 1,645.00 0.00

Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including

4 1.31 providing and fixing 3 pin 5/6 amps modular socket outlet and 5/6 amps modular switch, connection etc. as Each 20.00 477.00 9,540.00

required. (For light plugs to be used in residential buildings).

Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including

5 1.32 providing and fixing 6 pin 5/6 & 15/16 amps modular socket outlet and 15/16 amps modular switch, connection Each 10.00 586.00 5,860.00

etc. as required.

Supplying and fixing 20 amps, 240 volts, SPN industrial type, socket outlet, with 2 pole and earth, metal

enclosed plug top along with 20 amps "C" curve, SP, MCB, in sheet steel enclosure, on surface or in recess, with

chained metal cover for the socket out let and complete with connections, testing and commissioning etc. as

Wiring for light/ power plug with 2X4 sq. mm FRLS PVC insulated copper conductor single core cable in

7 1.12 surface/ recessed medium class PVC conduit alongwith 1 No 4 sq. mm FRLS PVC insulated copper conductor Metre 50 334 16,700.00

single core cable for loop earthing as required.Make:KEI,Worldcab,RR Kable,Bonton

Wiring for light/ power plug with 4X4 sq. mm FRLS PVC insulated copper conductor single core cable in

8 1.13 surface/ recessed medium class PVC conduit alongwith 2 Nos 4 sq. mm FRLS PVC insulated copper conductor Metre 25 537 13,425.00

single core cable for loop earthing as required.Make:KEI,Worldcab,RR Kable,Bonton

9 1.38 Supplying and fixing of call bell / buzzer suitable for single phase,230 volt complete as required. Each 10.00 99.00 990.00

SUB-HEAD III - FANS & LIGHT FIXTURES:

1 NDSR-1 Supply, installation, testing & commissioning of 4 FT TUBE LIGHT 20W Each 48.00 747.51 35,880.43

1 NDSR-1 Supply, installation, testing & commissioning of 4 FT TUBE LIGHT 40W Each 16.00 1,052.05 16,832.79

2 NDSR-1.2 Supply, installation, testing & commissioning of 15W Recessed mounted coral Round Led Downlighter Each 0.00 1,483.94 0.00

3 NDSR-1.3 Supply, Installation, Testing & Commissioning of 10W surface mounted Bulkhead light Each 2.00 919.16 1,838.32

Digitally signed by JAYA

4 NDSR-1.4 SITC of recess mounted LED luminaire (2X2) min 36W Each 0.00 3,433.00 0.00

5 NDSR-1.5 Supply, Installation, Testing & Commissioning of SURFACE LED DOWNLIGHTER Each 0.00 1,949.06 0.00

6 NDSR-1.6 SITC of pre-wired 600mm, 10Watt LED Light fitting (Application as Mirror Light) Each 7.00 1,018.83 7,131.79

9 NDSR-1.9 Supply, installation, testing & commissioning of 12W Recessed mounted coral Round Led Downlighter Each 26.00 963.46 25,049.85

Supply, installation, testing & commissioning of 18W Recessed mounted coral Round Led Downlighter

11 Supply, Installation, Testing and Commissioning of 1200 mm sweep, BEE 5 star rated, ceiling fan, 3 nos. blades,

30 cm long down rod, 2 nos. canopies, shackle kit, safety rope, copper winding, Power Factor not less than 0.9,

Service Value (CM/M/W) minimum 6.00, Air delivery minimum 210 Cum/Min , 350 RPM (tolerance as per IS :

DSR-19.1 374-2019), THD less than 10%, remote or electronic regulator unit for speed control and all remaining Each 2 2730 5460

accessories including safety pin, nut bolts, washers, temperature rise=75 degree C (max.), insulation resistance

more than 2 mega ohm, suitable for 230 V, 50 Hz, single phase AC Supply, earthing etc. complete as required.

SITC Fresh air fan 250 mm 2

Supply &installation, Testing & commissioning of DC- Inverter 3-5 star 1.5 Tonne split AC including 4

13 NDSR-1.12 stand/bracket, stabilizer and all other accessories connection, drain pipes etc., electrical work complete in all job 65,376.19 2,61,504.76

respect as per direction of engineer-in-charge

SUB HEAD - IV : LIGHTNING PROTECTION SYSTEM

1 Providing and fixing of lightning conductor finial, made of 25mm dia 300mm long, copper tube, having single

prong at top, with 85mm dia 6 mm thick copper base plate including holes etc. complete as required.

2 Jointing copper / G.I. tape (with another copper/ G I tape, base of the finial or any other metallic object) by

riveting / nut bolting/ sweating and soldering etc as required.

3 Providing and fixing GI tape 20mm x 3mm thick on parapet or surface of wall for lightning conductor as

required. (for horizontal run).

4 Providing and fixing G.I. tape 20mm x 3mm thick on parapet or surface of wall for lightning conductor as

required. (For vertical run.)

5 Providing and fixing testing joint, made of 20mm x 3mm thick G.I. strip, 125mm long with 4 Nos. of G.I. bolts,

nuts, check nuts and spring washers etc. complete as required.

6 6.14 Providing and laying G.I. tape, 32mm x 6mm thick, from earth electrode directly in ground as required. Metre 90.00 195 17,550.00

Total of Sub-Head - IV 88192 0.00

Digitally signed by JAYA

SUB HEAD - V: UPS

Supply, installation, testing & commissioning of One Set of 1 Nos., 2 KVA UPS. Each UPS should have

following specifications in addition to tender requirements :

(i) True online double conversions, IGBT Rectifier & inverter based UPS.

(ii) Three phases Input/ three phase output (Input Line Voltage: 340 - 478 Volt, 3 phase, Output Line Voltage

400 volt, 3 phase)

(iii) SMF batteries complete with MS Fabricated battery rack to accomodate the complete battery system.

(iv) Suitable for 30 Min backup on Full load at 0.8 Load P.F., with required nos. of Battery with Working UPS

(v) Output THD is less than 3% for full linear load & Less than 5 % for nonlinear load.

(vi) Crest factor 3:1

(vii) over load 125% for 10 min, 150% for 1 min and should be able to operate continuously at 115% load on

(viii) Battery type should be Valve regulated lead-acid (VRLA).

(ix) Inbuilt Delta - Star Input Isolation Transformer, parallel communication port, RS232, USB, EPO and

SNMP interface, BMS interface.

(x) Dust Filter at Air Inlet point are required.

(xi) UPS should be provided with environment monitoring probe to measure temperature and humidity of UPS

room on SNMP card software. (xii) LCD Display indicating all important parameters.

(xiii) UPS shall be provided with Temperature and Humidity Sensors to monitor Temperature and Humidity over

(xiv) Battery open rack with top cover, battery interlinks and battery breaker.

(xv) Battery to UPS cable as required should be provided with UPS systems.

(xvi) UPS system shall be parallelable upto 6 units in case required in future.

(xvii) Each UPS shall be compatible for working in parallel redundant mode with other.

Total of Sub-Head - V 0.00 1,45,334.70

SUB HEAD -VI : CABLE TRAY

3.0 Cable Tray

3.1 4.1 Supplying and installing following size of perforated pre-painted M.S cable trays with perforation not more

than 17.5%, inconvenient sections, joined with connectors, suspended from the ceiling with M.S. suspenders

including bolts&nuts, painting suspenders etc as required.

a 4.1.1 100 mm width X 50 mm depth X 1.6mm thickness Meter 8 543.00 4344.00

b 4.1.2 150 mm width X 50 mm depth X 1.6mm thickness Meter 5 604.00 3020.00

c 4.1.4 300 mm width X 50 mm depth X 1.6mm thickness Meter 0 677.00 0.00

d 4.1.6 450 mm width X 50 mm depth X 2.0 mm thickness Meter 10 1137.00 11370.00

3.2 4.2 Supplying and installing following size of perforated pre-painted M.S cable trays bends with perforation not

more than 17.5%, inconvenient sections, joined with connectors, suspended from the ceiling with M.S.

suspenders including bolts&nuts, painting suspenders etc as required.

a 4.2.1 100 mm width X 50 mm depth X 1.6mm thickness Each 2 868.00 1736.00

b 4.2.2 150 mm width X 50 mm depth X 1.6mm thickness Each 2 1018.00 2036.00

c 4.2.4 300 mm width X 50 mm depth X 1.6mm thickness Each 0 1197.00 0.00

d 4.2.6 450 mm width X 50 mm depth X 2.0 mm thickness Each 2 2293.00 4586.00

Digitally signed by JAYA

3.3 4.3 Supplying and installing following size of perforated pre-painted M.S cable trays reducers with perforation not

more than 17.5%, inconvenient sections, joined with connectors, suspended from the ceiling with M.S.

suspenders including bolts&nuts, painting suspenders etc as required.

a 4.3.1 100 mm width X 50 mm depth X 1.6mm thickness Each 1 1003.00 1003.00

b 4.3.2 150 mm width X 50 mm depth X 1.6mm thickness Each 0 1108.00 0.00

c 4.3.4 300 mm width X 50 mm depth X 1.6mm thickness Each 0 1713.00 0.00

d 4.3.6 450 mm width X 50 mm depth X 2.0 mm thickness Each 1 2758.00 2758.00

3.4 4.4 Supplying and installing following size of perforated pre-painted M.S cable trays Tee's with perforation not

more than 17.5%, inconvenient sections, joined with connectors, suspended from the ceiling with M.S.

suspenders including bolts&nuts, painting suspenders etc as required.

a 4.4.1 100 mm width X 50 mm depth X 1.6mm thickness Each 1 1139.00 1139.00

b 4.4.2 150 mm width X 50 mm depth X 1.6mm thickness Each 0 1408.00 0.00

c 4.4.4 300 mm width X 50 mm depth X 1.6mm thickness Each 0 2228.00 0.00

d 4.4.6 450 mm width X 50 mm depth X 2.0 mm thickness Each 1 3224.00 3224.00

Total of Sub-Head - VI 35,216.00 0.00

Digitally signed by JAYA

AS PER DSR-2022 AS PER MARKET RATE

S.NO DESCRIPTION OF ITEM UNIT QTY. RATE

ITEMS AMOUNT (RS.) RATE (RS.) Without GST AMOUNT (RS.)

EXTERNAL LIGHTING

1) MR 1 Supply of following sizes XLPE insulated (Heavy duty) Aluminium conductor armoured cables

suitable for working voltage upto and including 1100 Volts complete as required and as per

specifications.

Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of

2 following size direct in ground including excavation, sand cushioning, protective covering and refilling

the trench etc as required.

Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of

following size in the existing RCC/ HUME/ METAL pipe as required.

4) MR 2 Termination of the following sizes of XLPE insulated Aluminium/ Copper conductor cable including

providing terminal lugs,double compression gland , crimping the joints ,providing insulation

tape,effecting terminal connections to the equipment complete as required.

a 2 x 6 sq,mm, Al conductor cable Nos. 100 0.00 719.00 71,900.00

5) Supply, laying and termination of the following sizes of 650/1100 volts grade PVC insulated copper

conductor wires in existing conduits including end terminations with copper lugs.

a. 3 x 2.5 sq.mm. Copper conductor ,PVC insulated PVC sheathed wires RM 100

b. 2 X 6 sq. mm PVC insulated copper conductor wire along with 1 X 2.5sq.mm PVC insulated copper RM 2,200

conductor wire 439 9,65,800.00

6) Supplying and fixing in position of the following sizes of GI conduit buried in ground 600 mm deep

including all accessories complete as required and as per specifications.

a. 25 mm dia GI conduit RM 600

Providing, laying and fixing following dia RCC pipe NP2 class (light duty) in ground complete with

7 RCC collars, jointing with cement mortar 1:2 (1 cement : 2 fine sand) including trenching (75 cm

deep) and refilling etc as required.

8) MR 3 Supply,fixing and laying of Heavy duty PVC pipes complete buried in floor with joints and other

accessories as required.

Digitally signed by JAYA

12) MR 4 SITC of required height of 20-25 Meter High Mast shaft (5mm at bottom and 4 mm at top) including 48,57,740.00

LED floodlight type light fixtures of maximum 12 numbers of 300W suitable for wind speed as per site

condition, with raising lowering system comprising, head frame, luminaries carriage suitable to install

12 no's luminaries in symmetrical arrangement (one side arrangement only not in circular form),

suitable rings having for better light distribution including drum winch, SS wire rope, trailing cable,

connector, integral power tool motor, manual handle, junction box , lightening finial, wiring, foundation

bolts manufactured from special steel along with nuts, washers, anchor plate and common template,

LED type single dome aviation obstruction light, 63Amp Digital Timer Feeder Panel Box &

Accessories, Outdoor Type etc. along with all accessories and allied items etc. complete as required, Nos. 10 0.00 4,85,774.00

complete in all respect as per direction of Engineer-in-charge

Approx. dimensions: Hot dipped galvanized sections of Bottom:485mm, Top 150mm ,thickness

Base Plate: 685x685x 25mm, PCD 585mm

Foundation Bolt: M30 x 850mm x 12nos

(Note:- All material shall be of approved make & all the tests shall be performed as per client's

technical specification. )

13) MR 5 Feeder Piller

Design, manufacture,Supply, Installation, testing and commissioning at works of Double door panel

fabricated with minimum 2mm thick CRCA sheet, Conform to IS Specification, with IP-55 enclosure

protection, as per IS-2137(Revised), floor mounting free standing on a suitable massanory pedestal

outdoor type panel,provided with hinged detachable and lockable outer opening doors with the

following incoming/outgong MCCB/ MCBs mounted therein including making connections/

interconnections, earthing, painting etc. as required.The panel shall have canopy arrangement on the

top.All MCB to be C curve .

a. Feeder Pillar - X

The incoming shall comprise the following :-

1 No 100A FP ATS , 25 KA service breaking capacity with heavy duty solid neutral link alongwith

Earth fault relay and CBCT.

100A FP MCCB, 100A FP contactor and Timer.

Metering for incoming:

Digital Multifunction meter (MFM-4) with RS-485 communication port for measurement of PF, V, A &

Hz , equivalent to EM6459, with CT as required.

Phase indicating lamps RYB with 2 Amps SP MCB back up.

125 Amps TPN Aluminium Bus Bars of suitable length Bus bars shall be colour coded and insulated

by heat shrinkable sleaves & clip on shrouds for joints. The current density of Bus bar shall be 0.8

Outgoing (All MCB shall be suitable for motor duty & with heavy duty detachable solid neutral

10 nos 25A DP MCB 10 KA breaking capacity

Feeder Pillar - X described as above and all as per specification. Set 1 0.00 2,88,667.00 2,88,667.00

MR6 7M long G.I.octagonal pole complete with RCC foundation, required G.I base plate , single-arm of ERW 6 17,403.68 1,04,422.08

galvanised pipe 30mm - 1M length, providing GI pipes for cable entry junction box with prewired 6 Amp SP 0.00

MCB, loop-in -loop-out , terminal block, wiring with copper wire upto the fitting etc. complete

MrR 7 Supply, fixing & termination of Outdoor type IP66 70W Street Light Luminaire with die cast aluminium 6 5,029.92 30,179.52

housing & polycarbonate cover similar to JAQUAR Cat No. LSRT01S072XC or equivalent.

Digitally signed by JAYA

14) Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing

masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long Set 5 7,472.00 37,360.00

etc. with charcoal/ coke and salt as required.

15) Supply and fixing in position the following G.I. tape/wires including providing all fixing accessories

and effecting proper connections.

a. Providing and fixing 25 mm X 5 mm G.I. strip in 40 mm dia G.I. pipe from earth electrode including

connection with G.I. nut, bolt, spring, washer excavation and re-filling etc. as required. Metre 350 706.00 2,47,100.00

b. DSR-2018- Supplying and laying 6 SWG G.I. wire at 0.50 metre below ground level for conductor earth electrode, RM 600 51.00

5.7 including connection/ termination with GI thimble etc. as required.

Total of Sub-Head - V carried to summary sheet Rs 14,27,740.00 62,99,384.60

Digitally signed by JAYA

PROJECT :- PAVILION +FOOTBALL

Schedule Of Quantity

DSR DSR Rate MR Rate MR Amount

S. No. Description Unit PAVILION Amount

1.0 SANITARY FIXTURES & FITTINGS

1.1 17.78 Providing and fixing white vitreous china extended wall mounting

water closet of size 780x370x690mm of approved shape

including providing and fixing white vitreous china cistern with

dual flushing fitting,of flushing capacity 3 litre/6 litre( adjustable

to 4 litre/8 litres),including seat cover and cistern

fittings,nuts,bolts and gasket etc. complete.

1.2 17.7A Providing and fixing wash basin with C.I. brackets, 15 mm

dia CP Brass single hole basin mixer of approved quality

and make, including painting of fittings and brackets, cutting

and making good the walls wherever required:-

a) White Vitreous China Wash basin size 630x450 mm with

a 15 mm CP Brass single hole basin mixer Each 7 3960.55 27723.85 -

1.3 17.9 Providing and fixing kitchen sink with C.I. brackets, C.P.

brass chain with rubber plug, 40 mm C.P. brass waste

complete, including painting the fittings and brackets,

cutting and making good the walls wherever required:

17.9.1 White glazed fire clay kitchen sink of size 600x450x 250

Digitally signed by JAYA

DSR DSR Rate MR Rate MR Amount

S. No. Description Unit PAVILION Amount

1.4 MR-1 Supply, Receiving, Storing & Fixing of CP brass wall

mounted sink mixer with C.P. wall flange, swinging spout

complete as required with flow rate of 6.0 LPM complying

to Green Building requirements. Each 2 3675 7,350.00

1.5 17.16A Providing and fixing 8 mm dia C.P. / S.S. Jet with flexible

tube upto 1 metre long with S.S. triangular plate to

Eureopean type W.C. of quality and make as approved by

Engineer - in - charge. Each 7 349.15 2444.05 -

1.6 17.22A Providing and fixing CP Brass 32mm size bottle trap of

approved quality & make and as per the direction of engineer Each 7 1034.80 7243.6 -

1.7 18.50 Providing and fixing C.P. brass long nose bib cock of

approved quality conforming to IS standards and weighing

not less than 810 gms -

18.50.1 15 mm nominal bore Each 8 820.70 6565.6 -

1.8 17.34 Providing and fixing toilet paper holder -

1.10 MR-2 Supply, Receiving, Storing & Fixing of C.P. brass twin

coat hook with PVC rawl plug & C.P. brass screw complete

as required. Make : Each 7 720 5,040.00

1.11 18.53 Providing and fixing C.P. brass angle valve for basin mixer

and geyser points of approved quality conforming to -

Digitally signed by JAYA

DSR DSR Rate MR Rate MR Amount

S. No. Description Unit PAVILION Amount

18.53.1 15mm nominal bore Each 37 574.30 21249.1 -

1.12 18.74 Providing and fixing unplasticised P.V.C. connection pipe

with PTMT Nuts, collar and bush of approved quality and -

18.74.2 15 mm nominal bore with 45 cm length Each 37 121.90 4510.3 -

1.13 MR-3 Providing and fixing Chromium Plated towel ring

Rectangular shape with concealed fittings arrangement of

approved quality and colour, of approved brand &

manufacture complete as per direction of Engineer in Each 7 1328 9,296.00

1.14 MR-4 Providing and fixing of C. P. brass towel rail 600 x 20 mm

size complete with C.P. brass brackets. Each 8 1158 9,264.00

1.15 MR-5 Providing and fixing Cp bras liquid soap container 109 mm

wide, 125 mm high and 112 mm distance from wall of

standard shape with bracket of the same materials with snap

fittings of approved quality and colour, weighing not less Each 7 1448 10,136.00

1.16 17.23 Providing and fixing white vitreous china flat back or wall

corner type lipped front urinal basin of 430x260x350 mm or

340x410x265 mm sizes respectively.

17.75 Providing and fixing PTMT 15 mm Urinal spreader size

95x69x100 mm with 1/2" BSP thread and shapes, weighing

not less than 60 gms. each 8 107.20 857.6

Digitally signed by JAYA

DSR DSR Rate MR Rate MR Amount

S. No. Description Unit PAVILION Amount

1.17 8.10 Providing and fixing 75 mm high, 50 mm deep and 18 mm

thick stone slab table rubbed, edges rounded and polished,

fixed in urinal partitions by cutting a chase of appropriate

width with chase cutter and embedding the stone in the chase

with epoxy grout or with cement concrete 1:2:4 (1 cement : 2

coarse sand : 4 graded stone aggregate 6 mm nominal size)

as per direction of Engineer-in-charge and finished smooth.

8.10.2 Granite Stone of approved shade Sqm 8 4051.85 32414.8 -

1.18 MR 6 Supply and fixing of water cooler fully stainless steel of 60

litres cooling capacity and 120 litres storage capacity to be

operated on single phase supply with ISI mark. Each Cooler

shall be provide with 4 Nos pessmatic tap for Drinking Each 76136 -

1.19 17.31 Providing and fixing 600x450 mm beveled edge mirror of

superior glass (of approved quality) complete with 6 mm

thick hard board ground fixed to wooden cleats with C.P.

brass screws and washers complete. Each 7 1607.95 11255.65 -

1.20 17.28 Providing and fixing P.V.C. waste pipe for sink or wash

basin including P.V.C. waste fittings complete. -

17.28.2 Flexible pipe -

1.21 18.51 Providing and fixing C.P. brass long body bib cock of

approved quality conforming to IS standards and weighing

not less than 690 gms. -

Digitally signed by JAYA

DSR DSR Rate MR Rate MR Amount

S. No. Description Unit PAVILION Amount

18.51.1 15 mm nominal bore Each 4 798.95 3195.8 -

1.22 MR-7 Providing and Fixing 600 mm long Hand rail (Grab bar)

for Toilets with Stainless Steel Screws on wooden cleats /

expandable fastners complete as per instructions of the

engineer-in-charge Each 1812 -

1.23 MR-8 Providing and fixing low flow type two way bib tap as per

approved make complete in all respect as per engineer in the

charge. Each 7 2125 14,875.00

1.24 MR-9 Providing and fixing of recessed type soap tray complete,

including cutting and making good the walls where required.

1.25 MR-10 Providing and Fixing Electric Hot Water Geyser of Stainless Steel

EachMaterial Grade 316 with Inlet and Outlet Connection with 15 mm

TOTAL CARRIED OVER TO SUMMARY Ex GST 252594 62313

2.0 INTERNAL & EXTERNAL WATER SUPPLY

2.1 Providing and fixing Chlorinated Polyvinyl Chloride

(CPVC) pipes, having thermal stability for hot & cold water

supply, including all CPVC plain & brass threaded fittings,

i/c fixing the pipe with clamps at 1.00 m spacing. This

includes jointing of pipes & fittings with one step CPVC

solvent cement and the cost of cutting chases and making

good the same including testing of joints complete as per

18.8 direction of Engineer in Charge. -

Digitally signed by JAYA

DSR DSR Rate MR Rate MR Amount

S. No. Description Unit PAVILION Amount

Concealed work, including cutting chases and making good

the walls etc. -

Providing and fixing Chlorinated Polyvinyl Chloride

(CPVC) pipes, having thermal stability for hot & cold water

supply, including all CPVC plain & brass threaded fittings,

including fixing the pipe with clamps at 1.00 m spacing.

This includes jointing of pipes & fittings with one step

CPVC solvent cement and testing of joints complete as per

2.2 18.7 direction of Engineer in Charge. -

Internal work - Exposed on wall -

a) 18.7.2 20mm nominal bore Mtr. 35 335 11557.5 -

2.3 18.17 Providing and fixing gun metal gate valve with C.I. wheel

of approved quality (screwed end) : -

2.3.6 18.17.4 50mm nominal bore Each 1026.65 -

2.3.5 18.17.5 65mm nominal bore Each 1742.15 -

2.3.6 18.17.6 80mm nominal bore Each 2604.55 -

18.18 Providing and fixing ball valve (brass) of approved quality,

High or low pressure, with plastic floats complete : -

18.18.1 15 mm nominal bore Each 406.86 -

Digitally signed by JAYA

DSR DSR Rate MR Rate MR Amount

S. No. Description Unit PAVILION Amount

18.18.2 20 mm nominal bore Each 3 462.50 1387.5 -

18.18.3 25 mm nominal bore Each 6 464.05 2784.3 -

#REF! MR-16 Providing and fixing motorized valve with sensor of

approved quality, to complete the work. -

2.5.1 40 mm dia ( Flushing Riser) Each 29536 -

2.5.2 50 mm dia ( Domestic Riser) Each 1 30055 30,055.00

2.5.2 18.48 Providing and placing on terrace (at all floor levels)

polyethylene water storage tank, IS : 12701 marked, with

cover and suitable locking arrangement and making

necessary holes for inlet, outlet and overflow pipes but

without fittings and the base support for tank. Each 1500 11.00 16500 -

MR SITC of 1.5 HP monoblock pump with starter, cable

connection from nearby feeder and requisite civil work for

water supply atpavilion complete in all respect as per

direction of engineer in charge each 1 19657 19,657.00

3.0 SOIL, WASTE, VENT PIPES, RAIN WATER PIPES &

Providing and fixing soil, waste and vent pipes

Digitally signed by JAYA

DSR DSR Rate MR Rate MR Amount

S. No. Description Unit PAVILION Amount

3.1 MR-17 Supplying, Installation, Testing and Commissioning of

uPVC pipes type -B conforming to IS 13592 (1992) for

soil, waste and vent pipes including all fittings rubber ring

type (plain or with access door) e.g. bends, junctions, cowls,

offsets, access pieces, jointing with rubber ring joints with

lubricant etc. fixed with clamps to walls with cement

concrete 1:2:4 blocks complete in all respects. (For Soil &

3.2 MR-18 Providing, laying, Jointing, Testing and commissioning of

uPVC pressure pipes of 6Kg/Sqcm pressure rating class 5

(IS : 4985-2000) including fittings, tees, bends, clamps,

coupling and adaptors supports, and jointing with solvent

joint, testing and necessary earth work in excavation,

backfilling, disposal of surplus earth with a lead upto 50m

complete, compaction and consolidation Including laying

cement concrete 1:2:4 alround UPVC pipe including bed

concrete and thrust blocks at bends as per standard design

(For Soil & Waste Pipe) -

Digitally signed by JAYA

DSR DSR Rate MR Rate MR Amount

S. No. Description Unit PAVILION Amount

3.3 MR-19 Supplying, Installation, Testing and Commissioning of

uPVC, P or S trap of self cleansing design with / without

vent. arm Setting in cement concrete 1:2:4 mix complete

including cost of cutting & making good the Wall / Floors

wherever required. -

3.4 MR-20 Providing and fixing floor drain with jali size 110X50 size

inlet and outlet including cutting and making good the walls

and floors wherever required complete in all respects.

3.5 MR-21 Providing and fixing 125 mm dia, 3 mm thick Stainless

steel grating with frame for floor traps or drains of required

pattern including cutting and making good the floors

3.6 MR-22 Providing and fixing cast brass Cleanout plug with suitable

insert keys for opening in brass cap, male threaded

joint/reducer with G.I. socket caulked to Pipe/fittings of CI

pipe including cost of lead joints etc. complete in all respect.

3.7 12.22 Making khurras 45x45 cm with average minimum thickness ofeach

5 cm cement concrete

(1 cement : 2 coarse sand : 4 graded stone

Digitally signed by JAYA

DSR DSR Rate MR Rate MR Amount

S. No. Description Unit PAVILION Amount

Providing and fixing on wall face unplasticised Rigid PVC

rain water pipes conforming to IS : 13592 Type A, including

jointing with seal ring conforming to IS : 5382, leaving 10

mm gap for thermal expansion, (i) Single socketed pipes.

12.41.1 75 mm diameter Metre - 248.8 -

NSR 30 160 mm diameter (with all fittings) Metre - 1330.00 -

Providing and fixing to the inlet mouth of rain water pipe

cast iron grating 15 cm diameter and weighing not less than

Providing and fixing unplasticised -PVC pipe clips of

approved design to unplasticised - PVC rain water pipes by

means of 50x50x50 mm hard wood plugs, screwed with

M.S. screws of required length, including cutting brick work

and fixing in cement mortar 1:4 (1 cement : 4 coarse sand)

3.11 12.43 and making good the wall etc. complete. -

4.0 EXTERNAL SEWERAGE AND STORM WATER

Digitally signed by JAYA

DSR DSR Rate MR Rate MR Amount

S. No. Description Unit PAVILION Amount

4.1 2.10.1 Excavating trenches of required width for pipes, cables, etc

including excavation for sockets, and dressing of sides,

ramming of bottoms, depth upto 1.5 m, including getting out

the excavated soil, and then returning the soil as required, in

layers not exceeding 20 cm in depth, including consolidating

each deposited layer by ramming, watering, etc. and

disposing of surplus excavated soil as directed, within a lead

of 50 m : All kinds of soil -

2.10.1.2 Pipes, cables etc. exceeding 80 mm dia. but not exceeding

4.4 19.2 Providing and laying cement concrete 1:5:10 (1 cement : 5

coarse sand : 10 graded stone aggregate 40 mm nominal

size) all-round DWC pipes including bed concrete as per

standard design : -

19.2.2 150 mm dia. DWC & RCC Pipe Metre

4.2 19.6 Providing and laying non-pressure NP2 class (light duty)

R.C.C. pipes with collars jointed with stiff mixture of

cement mortar in the proportion of 1:2 (1 cement : 2 fine

sand) including testing of joints etc. complete : -

4.2.1 19.6.2 150 mm dia. R.C.C. pipe

Digitally signed by JAYA

DSR DSR Rate MR Rate MR Amount

S. No. Description Unit PAVILION Amount

4.5 19.7 Constructing brick masonry manhole in cement mortar 1:4 (

1cement : 4 coarse sand ) with R.C.C. top slab with 1:1.5:3

mix (1cement : 1.5 coarse sand (zone-III) : 3 graded stone

aggregate 20mm nominal size), foundation concrete 1:4:8

mix (1 cement : 4coarse sand (zone-III) : 8 graded stone

aggregate 40 mm nominalsize), inside plastering 12 mm

thick with cement mortar 1:3 (1 cement: 3 coarse sand)

finished with floating coat of neat cement andmaking

channels in cement concrete 1:2:4 (1 cement : 2 coarse sand :

4 graded stone aggregate 20 mm nominal size) finished with -

4.5.1 19.7.1.1 aInside

sizecoat of neat

90x80 cm cement

cm deepasincluding

with frame (light duty) 455x610 mm internal dimensions,

total weight of cover and frame to be not less than 38 kg

(weight of cover 23 kg and weight of frame 15 kg) : 19.7.1.1

With common burnt clay F.P.S. (non modular) bricks of Each 2 11687.10 23374.2 -

4.6 19.4 Providing and fixing square-mouth S.W. gully trap class SP-

1 complete with C.I. grating brick masonry chamber with

water tight C.I. cover with frame of 300 x300 mm size

(inside) the weight of cover to be not less than 4.50 kg and

frame to be not less than 2.70 kg as per standard design : -

19.4.2 150 x 100mm size P-type -

19.4.2.1 With common burnt clay F.P.S. (non modular) bricks of

class designation 7.5 Each 4 2734.20 10936.8 -

Digitally signed by JAYA

DSR DSR Rate MR Rate MR Amount

S. No. Description Unit PAVILION Amount

4.9 19.4 Providing and fixing square-mouth S.W. gully trap class SP-

1 complete with C.I. grating brick masonry chamber with

water tight C.I. cover with frame of 300 x300 mm size

(inside) the weight of cover to be not less than 4.50 kg and

frame to be not less than 2.70 kg as per standard design:

4.9.1 19.4.1.1 100x100 mm size P type

With common burnt clay F.P.S. (non modular)

bricks of class designation 7.5 Each 3 2707.65 8122.95 -

TOTAL CARRIED TO SUMMARY 158798

5 EXTERNAL WATER SUPPLY

Providing and fixing G.I. pipes complete with G.I. fittings including

5.1 18.12 trenching and refilling etc.

5.1.1 18.12.2 20 mm dia nominal bore Metre 368.60 -

5.1.1 18.12.3 25 mm dia nominal bore Metre 467.75 -

5.1.2 18.12.4 32 mm dia nominal bore Metre 150 540.30 81045 -

5.1.3 18.12.5 40 mm dia nominal bore Metre 617.05 -

5.1.4 18.12.6 50 mm dia nominal bore Metre 150 762.15 114322.5 -

5.1.5 18.12.7 65 mm dia nominal bore Metre 150 896.60 134490 -

5.1.6 18.12.8 80 mm dia nominal bore Metre 150 1041.70 156255 -

5.1.7 Derrived 100 mm dia nominal bore Metre 20 2327 46,540.00

5.1.8 Derrived 150 mm dia nominal bore Metre 2731 -

Digitally signed by JAYA

DSR DSR Rate MR Rate MR Amount

S. No. Description Unit PAVILION Amount

5.3 MR-20 Providing and fixing in position garden hydrant hose outlet

consisting of 25mm ball valve full bore type with lever and

female screwed ends, tested to 20 Kg/cm2 of approved

quality, including G.I. elbow, G.I. threaded hose receiver etc.

5.6 18.32 Constructing masonry Chamber 30x30x50 cm inside, in

brick work in cement mortar 1:4 (1 cement :4 coarse sand)

for stop cock, with C. I. surface box 100x100 x75 mm

(inside) with hinged cover fixed in cement concrete slab

1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone

aggregate 20 mm nominal size), i/c necessary excavation,

foundation concrete 1:5:10 ( 1 cement : 5 fine sand : 10

graded stone aggregate 40mm nominal size ) and inside

plastering with cement mortar 1:3 (1 cement : 3 coarse sand)

12mm thick, finished with a floating coat of neat cement

complete as per standard design : -

5.6.1 18.32.1 With common burnt clay F.P.S.(non modular) bricks of

class designation 7.5 Each 2 1992.60 3985.2 -

5.1 18.40 Painting G.I. pipes and fittings with two coats of anti-corrosivebitumastic paint of approved quality : -

5.1.1 18.40.2 20 mm dia nominal bore Metre 14.45 -

5.1.1 18.40.3 25 mm dia nominal bore Metre 18.35 -

5.1.2 18.40.4 32 mm dia nominal bore Metre 150 22.20 3330 -

5.1.3 18.40.5 40 mm dia nominal bore Metre 25.25 -

5.1.4 18.40.6 50 mm dia nominal bore Metre 150 30.50 4575 -

Digitally signed by JAYA

DSR DSR Rate MR Rate MR Amount

S. No. Description Unit PAVILION Amount

5.1.5 18.40.7 65 mm dia nominal bore Metre 150 37.85 5677.5 -

5.1.6 18.40.7 80 mm dia nominal bore Metre 150 37.85 5677.5 -

5.1.7 18.40.7 100 mm dia nominal bore Metre 20 58 1,160.00

Providing and fixing G.I. Union in G.I. pipe including cutting

threading the pipe and making long screws etc. complete

5.1.1 18.46.2 20 mm dia nominal bore Metre 346.80 -

5.1.1 18.46.3 25 mm dia nominal bore Metre 439.25 -

5.1.2 18.46.4 32 mm dia nominal bore Metre 25 489.05 12226.25 -

5.1.3 18.46.5 40 mm dia nominal bore Metre 631.30 -

5.1.4 18.46.6 50 mm dia nominal bore Metre 25 823.80 20595 -

5.1.5 18.46.7 65 mm dia nominal bore Metre 25 1136.80 28420 -

5.1.5 18.46.8 80 mm dia nominal bore Metre 25 1207.95 30198.75 -

5.1.5 Derrived 100 mm dia nominal bore Metre 3 1815 6,050.00

TOTAL CARRIED TO SUMMARY 600797.70 90,125.00

Digitally signed by JAYA