Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹45.2 LAccepted-AOC GATANGA MISSION CHARALI TEZPUR 784154 ASSAM | SONITPUR | ASSAM | 784154 | L1 | Accepted-AOC Lowest bidder | |
| 2 | L2₹46.4 L+₹38,062 (0.83%)Rejected-Finance | L2 | Rejected-Finance Become L2 | |
| 3 | L3₹47.4 L+₹1.4 L (3.02%)Rejected-Finance 2ND FLOOR SC ROAD SANTA PLAZA TEZPUR DISTT SONITPUR ASSAM PIN 784001 | SONITPUR | ASSAM | 784001 | L3 | Rejected-Finance Become L3 | |
| 4 | L4₹47.4 L+₹1.4 L (3.02%)Rejected-Finance | L4 | Rejected-Finance Become L4 |
Tender Value
Refer Docs
EMD Value
₹86,300
Closing Date
26 Jul 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE South Tezpur
GE South Tezpur Mission Chariali Tezpur, Assam
SPL REPAIR TO BLDG NO P-34 IN ZONE 1A AND OTHER SANCTIONED WORKS UNDER GE (S) TEZPUR
2022_MES_531639_1
8672
Open Tender
Civil Works
Item Rate
120 days
GE South Tezpur
As per NIT
4 documents required · 4 mandatory
₹500
Yes
GE South Tezpur
₹86,300
Yes
5 Aug 2022
17 Jun 2022
28 Jul 2022
17 Jun 2022
26 Jul 2022
1 Jul 2022
60 days
Amount
Excavation in trenches n exc 1.5 mtr depth nd n exc 1.5 m wide in soft/loose soil and getting out, complete all as specified and as directed
Returning/Filling in trenches in layer n exc 25 cm thick including watering well ramming etc, complete all as specified and as directed
Removing excavated soil to distance n exc 50 mtr and deposited as directed by Engr-in -Charge.
M&L Sand filling under floors or in foundations or in trenches including watering and consolidation, complete all as specified and as directed
Material and labour for hard core of gauge n.exc. 63 mm with broken stone aggregate, deposited, spread and levelled in layers n.exc 15 cm thick, watered and rammed to a true surface complete, all as specified and as directed.(Note:-Measurements for items shall be taken after consolidation), complete all as specified and as directed
Dismantling asbestos cement corrugated semi corrugated etc sheets in roof covering, complete all as specified and as directed
Dismanting timber scantling 40 Sqcm and over in secion in any position in framed work or unframed work, complete all as specified and as directed
Demolition of brickwork or stone/boulder masonry, built in cement mortar all as directed.
M&L for brick work with sub Class B bricks, straight or curved on plan exc 6 m mean radius built in cement mortar ( 1:6) having compressive strenght not less than 75 kg/Sq cm all as specified and directed.
Material and labour for sub Class B bricks bricks, straight or curved on plan to any radius in half brick thick wall built in cement mortar ( 1:4) having compressive strenght not less than 75 kg/Sq cm all as specified and directed.
Demolition of un-reinforced cement concrete in ground floors and pavings not exceeding 15 cm thickness, complete all as specified and as directed
Demolition of reinforced cement concrete (reinforcement cut as required to facilitate demolition) Complete all as specified and as directed
M&L reinforced cement concrete M25 (design mix) (20mm graded aggregate) in Beam,catilevers lintels, complete all as specified and as directed
Formwork to soffits of suspended slabs such as cooking slab and similar work; not exceeding 200mm thick (Horizontal or sloping), complete all as specified and as directed
M&L for mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, hooking ends and binding with the including mild steel wire (annealed) not less than 0.9mm dia or securing with clips, complete all as specified and as directed
All as per Item No 15 above but 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders complete all as specified and directed.
M&L pre cast RCC (1:2:4) type B1 using 20 mm graded stone aggregates for cover slab of manhole/soak pit etc set in cement mortar 1:4 complete all as specified and as directed by Engr-in-Charge.
M& L for RCC M25 (design mix) Type A1 (20 mm graded aggregate) in Walls, basement Parapet walls, ballast walls, lintel bands of any thickness, above top of footings, including attached pilaster and buttresses complete all as specifiedpet directed.
Formwork to ,faces of walls, parapets and staircase railing and similar work including attached pillasters, buttresses, etc.: Flat surface, vertical or to batter complete all as specified and directed.
Formwork to sides and soffits of floor or roof beams, beams haunchings, griders, bressummers, lintels, cantilevers, shelves including sup-ports, overhangs, etc. alos splays between floors and beams etc complete all as specified and directed.
Taking down chowkats or frames exc 1.5sqm and not exc 4.0 sqm each with shutters ( without taking off shutters from the frame ) including dismantling of PCC bed blocks for hold fasts, complete all as specified and as directed
Taking down chowkats or frames not exc 1.5sqm each with shutters( without taking off shutters from the frame ) including dismantling of PCC bed blocks for hold fasts, complete all as specified and as directed
Refixing of shutter of any description exc 1 sq. m and n exc 2 sq. m each in same opening including taking down,easing,adjusting and renewal/refixing of builders hardware as required including renewal of unserviciable screw, complete all as specified and as directed
S&F 0.50 mm thick pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet of any colour ,tensile strength of 550 Mpa as in roof covering etc fixed with self tapping screws, complete all as specified and as directed
All as per item ser No 24 above but plain sheet for ridge ,gutter,Eaves board etc fixed with self tapping screws as specified.
M&L 2nd class HW in scantling fixed clean swan in framed work, complete all as specified and as directed
Dismantling floor hearth wall tiling incl cement mortar bededing(but not backing), Complete all as specified and as directed
Roughening of surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust, etc. and rushing neat cement slurry with 3.0kg of cement per sqm, complete all as specified and as directed
Non - skid Ceramiccoloured tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.18sqm but not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm tick creed bed in cement mortar (1:4) complete all as specified and as directed
Non - skid Ceramiccoloured tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.18sqm but not exceeding 0.36 sqm, in skirting/dado etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 10 mm tick creed bed in cement mortar (1:3) complete all as specified and as directed
Non - skid Ceramiccoloured tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm tick creed bed in cement mortar (1:4) complete all as specified and as directed
S&F Coloured Glazed ceramic tiles 450 x 350 mm x 7mm thick, in skirting /dado etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over 10mm screeding in Cement mortar 1:3, complete all as specified and as directed
M&L Vetrified Ceramic tiles 8 to 10 mm thick (square/ rectangular) light shade, polished, area of each tiles exceeding 0.42 sqm but not exceeding 1.00 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm thick screed bed in CM 1:4.
All as per item No 33 above but in skirting over 10mm thick screeding in cement mortar 1:4, complete all as specified and as directed
S &F chequered cement concrete coloured tiles (glossy finish) 30cm x 30cm x22 to 25 mm thick set, jointed and pointed in neat cement slurry with grey cement and pigment including 5mm thick screed bed in CM 1:6. complete all as specified and directed.
Dismantling Structural steel work includings door, gates, etc and similar works complete all as directed
S&F Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161-1979 grade St.-240 complete all as specified and directed.
Refixing only steel truss,rafter and purline of different size bend to shape, cut to length etc, including necessary welding,special shape washer, as directed by Engineer in Charge.
S&F in repairs Vitreous China wash basin, white, flat back, size 550x400 excluding taps, waste, chain and plug and porcelain stoppe but including brackets complete all as specified and directed
Supply and fix, as in repairs, vitreous china squatting pan of Orrisa pattern size 580mm x 440 mm, white, with integral foot rests (excluding flushing cistern and flush pipe) all as specified and directed.
Supply and fix, as in repair, 10 ltrs capacity PVC valve less syphonic action type, low level flushing cistern, white, with inlet, ball valve float and handle including brackets complete all as specified and directed.
M&L in repair for 75 mm dia of outlet PVC(SWR) floor trap, plain with granting including jointing with solvent cement all as specified and directed
S&F in repairs PVC connections 15mm size with PTMT nut of length 450mm complete all as specified.
Supply and fix,as in repair, waste coupling CP 32 mm dia for glazed ware basins etc with fly nuts flanged etc complete all as specified and directed.
S&F in repairs 15 mm dia stop valve/angle valve fancy type chromium plated with screwed both ends for iron pipe or for unions and fixed complete all as specified and directed
S & F in repairs PTMT Swivel shower dia with shower Arm 15 mm dia 195 mm with bend of 45 degree with flange any colour for fixing mm pipe Complete all as specified and as directed
Supply and fix, as in repair, bibtap standard of PTMT any colour screwed, for iron pipe 15mm bore (minimum weight 90 gms) all as specified and directed.
S&F in repair tubular Towel rail chromium plated 600mm long 20mm dia D type complete all as specified and as directed.
S&F Pillar taps, 15 mm bore fancy type ,chromium plated, screwed down high pressure, with long screwed shanks and fly-nuts, screwed for iron pipe and fixed, complete all as specified and as directed
M&L for laying 15 mm bore steel tubes medium grade glavanised with all fitting and fixed complete to walls/ceilings or laid in floors including taking up or down complete all as specified and directed
M&L for laying 20 mm bore steel types medium grade galvanised with all fitting and fixed complete to walls and ceilings or laid in floors including taking up or down, complete all as specified and as directed
S&F composite 100% solid wood plastic complete (single extended process) material with density not less than 780 kg/cum and plastic wood as in wood chowkhat complete all as per manufacturer instruction, complete all as specified and as directed
Supply and fix, steel ventilator with top hung shulter including hinges, steel peg stay, complete all as specified and directed
S&F 4 mm thick sheet glass ordinary quality and glazing with oil putty in square not exc 0.50 sqm in each pane complete all as specified and directed.
S&F 5 mm thick tinted/heat absorbing glass with aluminium bedding, complete all as specified and as directed
S&F 6 mm thick tinted/heat absorbing glass of any size shall be fixed in alluminium frame work with approved fixing adhesive and accosseries as per direction complete all as specified and approval of garrison engineer. Nore :- Powder coated aluminium frame work shall be measured and paid separately.
M&L 12mm thick clear toughened glass inluding fixing stainless steel brackets, cleats and fixing accessories for frame less toughened glass fixing in fixed opening as per manufacture's instructions and approval of garrison engineer.
S&F MS framed works such as grills grating etc with ends of bars shouldered and for rivetted in forged into spikes, framed guard bars, railing and similar work confiring to Fe-290 Gde -E complete all as specified and directed
S&F of joist, channel, angle, flat iron or Tee sections, fixed independently with connecting plates, etc confirming to Fe 410-W (Gde 250 quality A) complete all as specified and directed.
S&F 100mm Butt hinges medium weight cold rolled mild steel, complete all as specified and as directed
S&F extruded aluminium alloy handels fabricated type, anodised, 150mm long, complete all as specified and as directed
S&F Aluminium anodised barrel tower bolts of extruded section 200 mm long and fixed with screws, complete all as specified and as directed
Taking down cement plaster, of any description on brick or stone walls, etc including racking out joints, hacking for key, scrubbing down with water all as directed.
M & L, 15mm thick rendering in C.M. (1:4) on fair faces of brick work finished even and fair without using extra cement, complete all as specified and as directed
M & L, 10mm thick rendering in C.M. (1:6) on brick work finished even and smooth without using extra cement , complete all as specified and as directed
Supply only Integral waterproofing compound complete all as specified and directed. (Note:-Quantity and application of WPC shall be followed as per manufacturere's instuctions).
M&L 75 mm thick plain cement concrete (1:3:6) type C1 using 20mm graded stone aggregate as in plinth protection and finishing surfaces of concrete even and smooth including making construction joint at interval of 1.5 mtr & filled with bituminous filler complete all as specified and as directed.
S&F solid PVC door frame of size 50mm X 47mm, made out of 5mm plain colour PVC sheet reinfoced with M.S. square tube, supply and fixing in opening as per specification, complete all as specified and as directed
Supply and fix, 30 mm thick factory made solid panel PVC shutters (conforming to IS : 4020) consisting of frame made out of mild steel tubes of 19 gauge and size 19 mm x 19 mm for stiles and 15 mm x 15 mm for top and bottom rails. Mild steel frame shall have a coat of steel primer and covered with PVC channel size 30 mm x 50 mm forming stiles and 5 mm thick 75 mm wide PVC sheets for top rail, lock rails, bottom rail on either side and 10 mm thick 20 mm wide cross PVC sheets as gap insert for top rail and bottom rail, panneling of 5 mm thick PVC sheet to be fitted in mild steel frame welded/sealed to the stiles and rails with 30 mm wide x 5 mm thick PVC sheet beading in either side and joint together with solvenet cement adhesive etc an additional 5 mm thick PVC strip of 20 mm width to struck on the interior side of the ‘C’ channel using PVC solvent adhesive including and fitted to PVC door frame all as specified and directed.
M & L for 50 mm PCC 1:4:8 ( 40 m graded stone aggregate) as sub floor , sub base even and rough to recieve the topping layer as in sub base all as specified and directed
Dismantling and breakingup drain pipes AC /CI /PVC set in cement mortar 100mm/75mm bore, complete all as specified and as directed
S&F PVC (SWR) pipes single socketed in any length with rubberring joints fixed to walls/floor 110mm bore, complete all as specified and as directed
All as per Item No 73 above but but 75mm bore
S&F PVC (SWR) bends any radius 75mm bore, complete all as specified and as directed
S&F PVC(SWR) junction single (single 'T') equal or unequal 75 mm bore, complete all as specified and as directed
S&F PVC (SWR) bends any radius 110 mm bore, complete all as specified and as directed
S& PVC (SWR) junction single (single 'T') equal or unequal 110mm bore, complete all as specified and as directed
M&L for PCC 1:4:8 type D-2 in filling, levelling and mass concrete etc as specified and directed.
M&L for providing cement concrete 1:2:4 type B-1 using 20 mm graded stone aggregate in coping and like including watehreing, slightly rounded or hamfered angles and throating as directed including formwork Complete all as specified and as directed
M&L for preparation of new steel surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.
M&L preparation of old painted steel surfaces over 10cm width or girth and applying one coat of synthetic enamel paint, complete all as specified and as directed
M&L preparation of old painted wooden surfaces over 10cm width or girth and applying one coat of synthetic enamel paint, complete all as specified and as directed
M&L preparation of new wooden surfaces over 10cm width or girth and applying two coats of synthetic enamel paint over one coat of pink primer, complete all as specified and as directed
M&L two coat of white wash on old wall surfaces of walls and cornices including preparation of old plastered or un plastered of surafce of wall by brooming down or steel wire brushing ,srcaping down smoke soot ,moulds ,moss and efflorescent salts and trading oil and greasy spot all as specified and directed
M&L for preparation of new undecorated surface of wall and applying three coats of white wash on wall. Complete all as specified and as directed
Supply and fix in repairs , bowel urinal flat back of size 465 x 355 x 265mm (minimum), white, with grating and union for discharge pipe, (excluding flushing cistern, flush pipe and waste pipe) complete including providing and fixing plugs, bedding urinals against wall in cement mortar (1:2) securing urinals to plugs with and including 60 mm brass screws and pointing around urinals back in cement all as specified
M&L for PCC 1:3:6 type C-1 (using 20 mm graded crushed stone aggregate) as in surface channels, drains,hold Fast including all necessary form work complete all as specified and directed.
Dismanting wall /ceiling board (Fibre pulp insulation) or insulation boards any thickness including cover filters, complete all as specified and as directed
S&F Exposed GI powder coated snap grid frame for false ceiling 600x600mm size of wall angle 25x25x0.25mm size of cross tee and main tee 26x24x0.25mm and 32mm x 24mm x 0.25mm with 1.5mm dia double GI suspentor including supply and fixing of 4mm thick E Board decorative type in false ceiling including fixing arrangement from steel tress any type of tress, complete all as specified and as directed
S&F Anodised aluminium frame Powder coated of any colour to match the colour of glass (minimum 50 micron) as in frame work to revcive glazing glass for opening , doors, windows, ventilators including screws,fastener, rebates including joining cleats to fixed the frame into opening all shall be fixing details and instruction etc. complete all as specified
S&F Anodised aluminium Powder coated (minimum 50 micron) door shutter aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber neoprene packing, handles 02 Nos in each door , hinges ,anodised aluminium snap beading, screws etc, complete all as specified
S&F powder coated anodised aluminium (minimum thickeness of powder coating 50 Micron) window and ventilator shutters, side hung/fixed type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips,rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100 mm long (2 no.) suitable handle (1 no.) complete all as specified and upto the entire satisfaction of Engineer in charge.
S&F Stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples, complete all as specified and as directed
Providing and laying 12/13mm thick High density Hard wood fibre board (HDF) laminated flooring and skirting of AC-4 class, laid as in tounge and groove/2- joints pattern of specified design and pattern as directed over 50 micron polythene sheet and 2mm thick PVC foam type sheet (EPE packing foam). The door cill shall be finished as per manufacturers specifically design pattern. The material shall be one side wax finished and exposed surface shall be pre- polished design and pattern. The overlapping of each polythene and foam sheel shall be 150mm each side and seperately to each other complete in all respect as specified and directed.
M&L for 40mm thick PCC (1:2:4) type B1 in floor/ pavings (using 20mm crushed and graded stone aggregate) finished even and smooth using extra cement including complete in all respect as specified and directed
M&L Applying one coat of distemper to old wall surface by smart painting method ,cornices including prepration of old plaster surface of wall by brooming down steel wire brush,scraping down smoke soot,moulds and efflorescent and treating oil and greasy spot. all as specefied and directed.
M&L Applying two coats of Oil bound distemper to plastered/previously untreated wall by by smart painting method over a coat of 1 mm layer wall care putty over a coat of primer including complete removal of existing surfac, complete all as specified and as directed
M&L Applying two coats of plastic emulsion to newly plastered/previously untreated wall over a coat of 1 mm layer wall care putty over a coat of primer including preparation of newly platsered wall all as specefied and directed.
M&L Applying two coats of plastic emulsion to old surfce wall over a coat of 1 mm layer wall care putty over a coat of primer including complete removal of existing treatment all as specefied and directed.
M&L complete removal of existing treatment and appplying two coats of weather coat(Apex) over two primer coats of damp shealth to old plastered walls as per manufacturer instrcution including properly fillings the cracks with putty and apllied by approved applicator complete all as specified and directed.
M&L preparation of newely plaseter sufaces and appplying two coats of weather coat(Apex) over a coat of primer coats of damp shealth to new plastered walls as per manufacturer and apllied by approved applicator complete all as specified and directed.
M& L for stainless steel tubular section including all fixing accossaries , guard rails , treades, landing, balusters, hand rails, etc. Fixed in position including cleats, brackets, etc. fabricated and errected, complete all as specified and directed.
M&L Aluminium (Extruded section body type) Door closer hydraulically regulated,designation No. 3,universal type, suitablefor door shutters of 851 to 1000 mm in width hand of weight between 61 to 80 kg and fixed, complete all as specified and as directed
Taking down carefully aluminium point wiring (light, Socket or power) complete including fittings and fixtures such as switches, ceiling roses pendents, regulators, sockets,light fitting etc including making good the disturbed portion/surface, complete all as specified and as directed
Taking down old unsv submain wiring of any size complete all as specified and directed
Taking down old unsv MCB DB including MCB SP/DP/TP of any size complete all as specified and directed
Taking down fan, sealing cable end, dismantling blades and removing fan and blades to store complete all as specified and directed
M & L for point wiring for one light/Fan point with 1.5 sqmm cable PVC insulated copper conductor multi stranded as per IS-694 FR cable controlled by one way switch, drawn through and including PVC casing caping with all accessories incl 1.5 sqmm multi strand copper conductor cable (green colour) PVC insulated and unsheathed for earth continuity connected to common earth dolly and sunken cast pressed steel terminal box fixed flush to wall of not less than 1.6 mm thick for mounting of fittings such as modular switches, sockets and regulators with Modular PVC flush box and Modular White Cover plate with frame all as specified and directed.
All as per Ser item No.110 above but for 5 amps socket on same board with other switches, complete all as specified and as directed
All as per Ser item No.110 above but for 5 amps socket on independent board, complete all as specified and as directed
All as per Ser item No.110 above but with 2.5 sqmm cables for 15 amps switch socket combination outlet on independent board complete all as specified and directed.
Supply and fix of Modular switch 1 way 6A, 1 module, complete all as specified and as directed
Supply and fix of Modular Socket, 6A - 5 pin combined 2 module,Complete all as specified and as directed
Supply and fix of Modular switch 1 way 16A, 1 module, complete all as specified and as directed
Supply and fix of Socket 6A/16A - 5 pin combined 2 module,Complete all as specified and as directed
Supply and fix of ceiling rose surface backelite 65x50 mm having 3 terminals, complete all as specified and as directed
Supply and fix of switch piano,5 amps SP one way, complete all as specified and as directed
S & F of Modular Fan step regulator, 120W - 2 module all as specified and directed
Supply and fix of Single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB 32 Amps all as directed
M&L for sub main wiring with two run of 4.0 Sq. mm PVC un-sheathed, copper conductor cable, 1100 Volt, and one run of copper earth wire 4 Sq mm drawn through PVC Casing Caping and all accessories,including making good the disturbed surface by Putty and matching the colour of wall with the existing colour of the (wash/paint/distemper) wherever required(as per the existing condition), complete all as specified. Note: Copper conductor 2 run and one run of copper earth wire shall be measured as one length, complete all as specified and as directed
M&L for sub main wiring with Two run of 6.0 Sq. mm PVC un-sheathed, copper conductor cable, 1100 Volt, and One run of copper earth wire 6 Sq mm drawn through PVC Casing Caping and all accessories,including making good the disturbed surface by Putty and matching the colour of wall with the existing colour of the (wash/paint/distemper) wherever required(as per the existing condition), complete all as specified. Note: Copper conductor 2 run and one run of copper earth wire shall be measured as one length, complete all as specified and as directed
Supply and Fixing wall mounted LED batten, polycarbonate housing & integrated electronic driver. LED light fittings flicker free, instant start with uniform light distribution 20 Watts 4 ft indoor decorative with 2 Core copper wire from ceiling rose to light fitting. Make Philips/Havells/CG/surya.
Supply and Fixing in repairs wall mounted LED batten, polycarbonate housing & integrated electronic driver. LED light fittings flicker free, instant start with uniform light distribution 10W 2 ft indoor decorative with 2 Core copper wire from ceiling rose to light fitting. Make of Havells cat no.LHEXACP7IN1W010 & equivalent hilips/Havells/CG/surya.
Supply and fixing in repair recessed dust free LED fitting 40 watts size(2X2)'' soft light glare free homogenous illumination very high efficiency enviormental friendly long life complete making all connection using three core PVC insulated copper conductor muilti strandard flexible cable drawn through in PVC flexible conduit pipe from fitting to ceiling rose complete all as specified and directed. Make :- Havells hilips/Havells/CG.
M&L and fixing LED street light 25W IP-66,230V environment friendly with operating temprature 10 to 50 degree celsius operating voltage range 140 to 270 volts,system lumen >2500,colour temprature >=5700k suitable for pole dia 43 mm (max) including GI Bend pipe length 1.5 meters for mounting including all its accessories, complete all as specified and as directed
Hanging only ceiling fan (to be refixed the items obtain under items No 109) and connecting up including provision of cable from ceiling rose/connector to fan, complete all as specified and as directed
M&L for rewinding of ceiling fan,1200mm any make and any type of model, after taking burnt out old winding wire complete and cleaning the internal slots of rotor with ring and rewinding the ceiling fan with super enamelled copper winding wire of suitable SWG Varnishing, baking in oven and reassembling with new bearings both complete all as specified and directed
Supply and fix exhaust fan, metalic body AC single Phase. 230V of size 250 mm sweep with, blades, and frame and louvers complete all as specified and as directed.
Supply and fix wall mounting Fan of 400mm Sweep complete all as specified and directed
Supply and fix in replacement of TP&N Vertical Loadline DBs are fitted with Bus Bars, Neutral Links, Blanking Plates (without MCCB), 6 way, Double DOOR SUITABLE FOR TP/FP ‘G FRAME’ MCCB, Cat No CSDBTPNVPEDD06 of Make: Havells or equivalent make of L&T/Legrand/C&S/Indo asian
Supply and fix in replacement of TPN Loadline DBs are fitted with Bus Bars, Neutral Links, Blanking Plates (without MCCB),4 way, Double DOOR SUITABLE FOR TP/FP ‘G FRAME’ MCCB, Cat No CSDBTPNHPEDD04 of Make: Havells or equivalent make of L&T/Legrand/C&S/Indo asian
Supply and fixing in replacement of MCCB 4 Pole, 415 V, fixed type, 100 Amps with breaking capacity 16 KA, complete all as specified and as directed
Supply and fix SPN double door MCB distribution board sheet steel, powder coated 8 way,IP-42 with 200 amps rated bud bar Neutral link, earth bar and din rail complete all as directed.
Supply and fixing in replacement of 415 V, 10KA 'C' curve miniature circuit breaker (MCB) of TPN and current carrying capacity 32 Amp in the MCB DB complete with connection testing and commissioning complete all as specified and directed. Make: Havells/Legrand/L&T/Merlin Gerin/Standard/HPL
Supply and fixing in replacement of 240V, 10KA 'C' curve miniature circuit breaker (MCB) of Single pole and Neutral and current carrying capacity 32 Amp in the MCB DB complete with connection testing and commissioning complete all as specified and directed. Make: Havells/Legrand/L&T/Merlin Gerin/Standard/HPL
Supply and fixing in replacement of 240V, 10 KA 'B' curve miniature circuit breaker (MCB) of single pole (SP) and current carrying capacity 5 to 32 AMP, in the MCB DB Complete with connection testing and commissioning completed all as directed. Make: Havells/Legrand/L&T/Merlin Gerin/Standard/HPL
Supply and fixing in replacemetn of 240V, 10 KA 'B' curve miniature circuit breaker (MCB) of single pole and current carrying capacity 40 AMP, in the MCB DB Complete with connection testing and commissioning completed all as directed. Make: Havells/Legrand/L&T/Merlin Gerin/Standard/HPL
Supply and fixing MCB DP 6 TO 32 amps,B series,230 volts, complete all as specified and as directed
M/L for Earthing complete with galvanised steel earth plate electrode 60×60cm.× 6mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less'than 1.5 metres below normal ground level, connected to galvanised earth lead wire 4.0mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No. 3 connected to earthing test point all as specified or indicated including testing on completion all as specified or indicated including excavation and earth work and testing on completion including takingdown old unsv earthing all as directed
S&F in replacement of XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 35 sq mm 4 core, complete all as specified and as directed
S&F in replacement of XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 10 sq mm 2 core, complete all as specified and as directed
M&L for Brick Sub Class 'B' locally available best quality laid in trenches with width equal to length of the bricks, above sand cushioning for cable protection complete all as specified and as directed.
Supply, lay and fix in replacement of 40 mm bore galvanized iron water tubing low grade including all fittings and fixed/ laid in trenches or on poles complete all as specified and directed. Note 1:-The contract sum shall be arrieved at after deducting amount of schedule of credit from the total quated amount. Note 2-Contractor's supervisor and main worker would wear shirt/T-shirt of colour sky blue/brown/yellow preferable embosed with contractor's firm name while carriying out any activities in defence area for better check of security purpose. Note 3:-The tenderer (all eligible contractors) shall ascertain the taxes & levies as on date. The subject tender caters all the taxes & levies as on date including the latest notification of GST issued as on date ( issued by Central Board of Indirect Taxes and Customs)
Chinmay Traders
AVASANA SOLUTIONS PRIVATE LIMITED
M/S Manjit Singh
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .