HT, LT & TC Work and laying of underground cable network with terminations in the area of DGVCL under mainly Gujarat wire free city mission and other scheme for Rander Rural Sub Division under Olpad (R) Division and if required work to be carried out at other sub division under Olpad (R) Division or within surat city circle.

Schedule-B for ARC for Erection and labor work of supply, laying, testing & commissioning of 11/22 KV Underground XLPE cable

(XLPE cable will be supplied by DGVCL) with cable end termination & straight through jointing kit (To be supplied by contractor) on

ARC basis under mainly for Gujarat wire free city mission and other scheme if required for Rander Rural sub division under Olpad (R)

division and if required work to be carried out at other sub division under Olpad (R) Division.

Sr. No. Item Code Description Unit FY 2024-25

Labour charge for excavation of cable trench of 400mm width x 1200mm depth,

in any type of soil for laying of cable of size up to 240 mm2 (For additional cable

200 mm additional width shall be considered i.e. half trench length is to be

Labour charge for excavation of cable trench of 600mm width x 1200mm depth,

in any type of soil for laying of cable of size up to 240 mm2 (For additional cable

200 mm additional width shall be considered i.e. half trench length is to be

Labour charge for excavation of cable trench of 400mm width x 1500mm depth,

in any type of soil for laying of cable of size up to 240 mm2 (For additional cable

200 mm additional width shall be considered i.e. half trench length is to be

Labour charge for laying of 11kV / 22 kV XLPE Cable of size up to 240 mm2 &

preparation of sand layer 100mm thick, in the cable trench & covering the cable

with 150 mm dia (Inner), thickness 25 mm, 1.0 meter long RCC half round muffs

and providing and fixing of 4inch width yellow colour polyethylene tape with

printing "CAUTION ELECTRIC CABLE BELOW" at 0.75 m depth from ground

surface after laying cable in trench. This will provide indication that electric cable is

passing underground so as to protect cable from mechnical injuries, refilling the

same, as per Instruction of Engineer in Charge (EIC).

Labour charge for horizontal drilling using Auger machine without damage to

surface road at max 2.0 mtrs depth & putting of 6.11 kg/cm2 , class-4,Green color,

110mm O.D. , 8.5mm thickness H.D.P.E. pipe confirms to IS 4984-1987(3rd

revision) and BIS certification and laying of 11KV/22KV XLPE cable of size up to

5 9925000005 240 mm2 in HDPE pipe, as per Site Condition (excluding cost of pipe). The detail Meter

map obtained from HDD machine and excell sheet(hard and soft copy) indicating

the respective depth and distance from adjacent landmark for each segment for

HDD is must required to be submitted. HDD to be carried out at depth 1.5 mtrs to

2.0 mtrs as per site conditions and as per instruction of EIC.

Labour charge for horizontal drilling manually without damage to surface road at

max 2.0 mtrs depth & putting of 6.11 kg/cm2 , class-4,Green color, 110mm O.D.

8.5mm thickness H.D.P.E. pipe confirms to IS 4984-1987(3rd revision) and BIS

certification and laying of 11KV/22KV XLPE cable of size up to 240 mm2 size, as

per Site Condition (excluding cost of pipe). The detail map and excell sheet(hard

and soft copy) indicating the respective depth and distance from adjacent

landmark for each segment of cable to be submitted. Drilling to be carried out at

depth Minimum 1.2 mtrs to 2.0 mtrs as per site conditions as per instruction of EIC.

Supply of 6.11kg/cm2 , class-4,Green color, 110mm O.D. , 8.5 mm thickness

7 9925000007 H.D.P.E. pipe confirms to IS 4984 and BIS certification for laying of underground Meter

11KV / 22KV XLPE cable up to 240 mm2 size.

Labour work for RCC concreting on disputed location and repairing of damage

8 9925000008 portion of road crossing for the work carried out for roads crossing as well as CMT

concreting & muffing of ploes including all materials (1:2:4)

Sr. No. Item Code Description Unit FY 2024-25

Providing & fixing concrete stone route marker of 300 mm width x 150 mm thick

x 650 mm height embedded in earth at least 300 mm below & 350 mm above

ground level respectively at distance approx 50 meters along the length of cable.

The RCC concreting (1:2:4)(all necessary maeterials will be in bidder's scope) of

route marker is to be carried out 300 mm width x 150 mm thick x 300 mm below

ground level as per instruction of EIC. The route marker should be with name of

company with approved yellow colour-DGVCL. The distance from marker to cable

and cable depth with feeder name etc., marked with arrow sign is to be painted on

it.The route marker is to be fixed at location near to any fixed permanent location

(not necessary to fix exact on top of cable) as per instruction of EIC.

Erection of D.P. (double pole) structure using 9 / 11 Mtr. RSJ pole with cable

connection arrangement along with fitting of necessary fabrication for 11KV cable

including excavation of pit & refilling of earth as per instruction of EIC. (Exclusive of

concreting & muffing of poles)

Erection of Single pole structure using 9 / 11 Mtr RSJ pole with cable

connection arrangement along with fitting ofnecessary fabrication for 11KV/22 KV

cable including excavation of pit & refilling of earth as per instruction of EIC.

(Exclusive of concreting & muffing of poles)

Erection of D.P. (double pole) structure using 8.0 Mtr. PSC pole with cable

connection arrangement along with fitting of necessary fabrication for 11KV cable

including excavation of pit & refilling of earth as per instruction of EIC. (Exclusive of

concreting & muffing of poles)

Erection of Single pole structure using 8.0 Mtr PSC pole with cable connection

arrangement along with fitting ofnecessary fabrication for 11KV/22 KV cable

including excavation of pit & refilling of earth as per instruction of EIC. (Exclusive of

concreting & muffing of poles)

Labour charge for erecting of 11kV / 22 kV XLPE cable of size up to 240 mm2 on

14 9925000014 DP Structure with fixing of 02 Nos polymer cleats on top and middle Per Job

part.Polymer cleats, nut bolts etc. fixing material to be provided by contractor.

Providing & fixing of 6.11kg/cm2 , class-4,Green color, 110mm O.D. , 8.5mm

thickness H.D.P.E. pipe confirms to IS 4984 and BIS certification on the

erected DP structure for the mechanical protection of cable by inserting the cable

15 9925000015 inside HDPE pipe. The HDPE pipe shall be erected in such a way that 300mm Per Job

shall be below the ground level and the rest 2700 mm shall be supported on

the DP Structure with 01 No Polymer cleat.All materials including polymer cleat

and Nut bolt to be provided by contractor.

Providing and fixing of pipe type earthing from 80 mm dia class-B GI pipe with pit

to be filled with salt & coke and construction of chamber as per DGVCL Drg. No.

16 9925000016 dg /100 for DP and cable. The earthing pit should be joined with cable by G.I. strip No.

of size 1” width & 2 mm thick. All material GI pipe, Coke, Salt etc will be supplied

Supply & fixing of heat shrink type end terminations (outdoor) for upto 11kV

3C x 185 mm2 size XLPE cable as per DGVCL technical specification

Supply & fixing of heat & shrinkable end terminations (outdoor) for upto 22 kV

3C x 185 mm2 size XLPE cable as per DGVCL technical specification)

Supply & fixing of heat shrink type end terminations (indoor) for upto 11kV 3C x

185 mm2 size XLPE cable as per DGVCL technical specification)

Supply & fixing of heat & shrinkable end terminations (indoor) for upto 22 kV 3C

x 185 mm2 size XLPE cable as per DGVCL technical specification

Supply & fixing of heat shrinkable straight through joint for upto 11kV 3C x

mm2 size XLPE cableas per DGVCL technical specification.

Supply & fixing of heat shrinkable straight through joint type for upto 22kV 3C x

185 mm2 size XLPE cable as per DGVCL technical specification

Labour charge for excavation of 2100mm long x 1200mm wide x 1200 mm deep

joint pits for installation of 11kV / 22kV Straight through joints as per

23 9925000023 instruction of engineer-in-charge & covering the cable with 150 mm dia (Outer), No.

thickness 25 mm, 1.0 meter long RCC half round muffs & refilling same as per

instruction of EIC .

Sr. No. Item Code Description Unit FY 2024-25

Providing and fixing of insulating bus bar, made from 11KV/22KV XLPE cable

after removal of semi conducting layer and applying of PVC heat shrinkable anti-

tracking core insulating tubing (1.1KV), on both end terminal using Aluminium long

barrel heavy duty up to 240 sq mm lugs, Aluminium bus connector. Taping with

PG- clamp for bus conductor as per drawing and as per instruction of EIC. The

Alluminium lugs and PG clamp shall be covered with 11KV/22KV HT insulating

tapes.(11KV/22KV XLPE cable will be in scope of DGVCL while all other materials

will be in bidder's scope)

Testing of cable at various points and commissioning the feeder as per instruction

of engineer-in-charge.Test result shall be submitted by contractor with bill.

Preparation and submission of 6 (six) copies, of complete layout drawings with

26 9925000026 GIS mapping as per actual cable routing showing road crossing, HDPE pipe Set

sleeving, jointing locations, markers etc.

Providing and fixing of Sign Board at junction point Made out of 2 mm aluminium

sheet size 750x300 mm (2.5 x 1ft) rectangle, as per design, pre treated with

phosphate process and acid etching coated with one coat of epoxy primer and two

coats of best quality paints, refloctrorised with Hi-Intensity retro – reflective

sheeting as per the latest and frame fabricated from suitable size iron angle. The

Sign Board is to be fixed on the base prepared from channel and bracing angles

which is grouted by means of cement concreting of 1:2:4 for size of 300 mm dia x

800 mm height (500 mm to be grouted in ground). The details to be displayed on

sign board will be given by In-charge Engineer.

(a) Hi intensity Micro prismatic Grade

Providing and fixing of Sign Board (Danger Board) on Distribution Transformer

Made out of 2mm aluminium sheet size 300x300mm (1x1ft) as per design, pre

treated with phosphate process and acid etching coated with one coat of epoxy

28 9925000028 primer and two coats of best quality paints, refloctrorised with Hi-Intensity retro- No.

reflective sheeting as per the latest and frame fabricated from suitable size iron

angle. The Sign Board (Danger Board is to be fixed at the location as per

instruction of In-charge Engineer.

(a) Hi intensity Micro prismatic Grade

Providing & fixing of aluminium tag of size 250 mm (L) x 75 mm (W) from 3 mm

aluminium sheet along with 1.0 mm dia aluminium binding wire for fixing of

29 9925000029 aluminium tag near end termination joint at DP structure for identifyng the cable. No.

The details of feeder i.e. 11 / 22 KV with feeder name shound be punched on the

tag by letter punch of size 16 mm as per instruction of In-charge Engineer.

Supply & fixing of heat shrink type end terminations (outdoor) for 11kV 3C x

240 mm2 size XLPE cable as per DGVCL technical specification

Supply & fixing of heat & shrinkable end terminations (outdoor) for 22 kV 3C x

240 mm2 size XLPE cable as per DGVCL technical specification)

Supply & fixing of heat shrink type end terminations (indoor) for 11kV 3C x

mm2 size XLPE cable as per DGVCL technical specification)

Supply & fixing of heat & shrinkable end terminations (indoor) for 22 kV 3C x

240 mm2 size XLPE cable as per DGVCL technical specification

Supply & fixing of heat shrinkable straight through joint for 11kV 3C x 240 mm2

size XLPE cableas per DGVCL technical specification.

Supply & fixing of heat shrinkable straight through joint type for 22kV 3C x

mm2 size XLPE cable as per DGVCL technical specification

Installation, Testing and commissioning of 11 KV,630 A SCADA Compatible, RRL

36 9925000038 type- 3 Way RMU including Two numbers of earthings as per Drawing (material is No.

in bidder's scope) and as per DGVCL Technical specification.

Installation, Testing and commissioning of 11 KV,630 A SCADA Compatible,

37 9925000039 RRLL type- 4 Way RMU including Two numbers of earthings as per Drawing No.

(material is in bidder's scope) and as per DGVCL Technical specification.

Installation, Testing and commissioning of 22KV,630 A SCADA Compatible, RRL

38 9925000040 type-3 Way, RMU including Two numbers of earthings as per Drawing (material is No.

in bidder's scope) and as per DGVCL Technical specification.

Sr. No. Item Code Description Unit FY 2024-25

Installation, Testing and commissioning of 22KV,630 A SCADA Compatible,

39 9925000041 RRLL type-4 Way, RMU including Two numbers of earthings as per Drawing No.

(material is in bidder's scope) and as per DGVCL Technical specification.

Construction of plinth for 11KV, RRL type- 3 Way (i.e Two numbers of Isolator

& One number of Breaker) Ring Main Unit as per DGVCL's technical specification

mentioned in drawing no: Drg. 11kv-01. All required material will be supplied by

Construction of plinth for 11KV, RRLL type- 4 Way (i.e Two numbers of Isolator

& Two number of Breaker)Ring Main Unit as per DGVCL's technical specification

mentioned in drawing no:Drg. 11kv-02.All required material will be supplied by

Construction of plinth for 22KV, RRL type- 3 Way (i.e Two numbers of Isolator

& One number of Breaker) Ring Main Unit as per DGVCL's technical specification

mentioned in drawing no: Drg. 22kv-01. All required material will be supplied by

Construction of plinth for 22KV, RRLL type- 4 Way (i.e Two numbers of Isolator

& Two number of Breaker)Ring Main Unit as per DGVCL's technical specification

mentioned in drawing no:Drg. 22kv-02.All required material will be supplied by

Modifications e.g.Providing and fixing of Terminal protectors i.e. Re-use able boot

(HT Side 11/22KV, LT Side 1.1KV) including 11/22 KV insulating taps and L.T.(1.1

KV) insulating taps ,Busbar, Tapping from Bus Bar (11/22 KV XLPE cable)

through P.G. Clamp for H.T. Jumper to D.O. Fuse to bushings of Transformer

Center, providing & Fixing of jumper and providing & fixing of Heat Shrinkable

Anti Tracking Core Insulating Tubing (Insulation Level 11/22 KV) in H.T. jumper

Clamping arrangement of cable support frame on both side of existing Over Head

type Distribution Transformer to utilize in Under Ground cable network as per

44 9925000046 drawing & as per instruction of Engineer incharge. All live parts i.e. PG-Clamp, No.

connections of D.O.fuses, HT bushings etc . shall be covered with fixinng of 11/22

KV HT insulating tapes. ( 11/22 KV XLPE cable will be in scope of DGVCL while

all other materials will be in bidder's scope ) .

Laying of any size of 11/ 22 KV XLPE /PILC Cable in redaymade trench or in open Per Cable

46 9925000060 Labour charges for Lying of O/H XLPE cable pole to pole KM

Supply of 150 mm dia (Inner), thickness 25 mm, 1.0 meter long RCC half round

Name of Work : Work of ARC for Erection of HT/LT Line and TC work and other maintenance work and O/H XLPE Cable under mainly for Gujarat wire free

city mission and other scheme if required for Rander Rural sub division under Olpad (R) division and if required work to be carried out at other sub

division under Olpad (R) Division.

CAPITAL WORK LABOUR RATES FOR FY 2024-25 (WITHOUT GST)

Sr. No. Item Code Item Unit FY 2024-25

Sr. No. Item Code Description Unit FY 2024-25

HT TAPPING FROM THE EXISTING POLE INCLUDING FIXING OF CROSS

ARMS, CLAMPS ANTI-CLIMBING DEVICES, DANGER BOARD, INSULATORS

1 9926000001 ETC. COMPLETE AND PAINTING OF FABRICATED MATERIALS AND No.

NUMBERING COMPLETE WITH COST OF PAINTS AS PER STANDARD

SPECIFICATION BUT EXCLUDING ERECTION OF GUY SET AND EARTHING.

ERECTION OF PSC POLES OF 8 *200 KG INCLUDING EXCAVATION OF PIT

AND REFILLING OF EARTH, FIXING OFCROSS ARMS, TOP FITTING CLAMPS

ANTI-CLIMBING DEVICES, INSULATORS ETC. COMPLETE AND PAINTING OF

FABRICATED MATERIALS USED ON THE POLES AND NUMBERING WITH

COST OF PAINT AS PER STANDARD SPECIFICATION BUT EXCLUDING

ERECTION OF GUY SET AND EARTHING.

ERECTION OF STEEL POLES OF 9 TO 11 METERS INCLUDING EXCAVATION

OF PIT AND REFILLING OF EARTH, FIXING OFCROSS ARMS, TOP FITTING

CLAMPS ANTI-CLIMBING DEVICES, DANGER BOARD, INSULATORS ETC.

3 9926000003 COMPLETE AND PAINTING OF STEEL POLE, FABRICATED MATERIALS No.

USED ON THE POLEAND NUMBERING WITH COST OF PAINT AS PER

STANDARD SPECIFICATION BUT EXCLUDING ERECTION OF GUY SET AND

ERECTION OF STEEL POLE OF 13 METERS FOR RAILWAY CROSSING ON

BG/MG/NG LINE FOR 0.400/11/22KV OVERHEAD LINES I.E INCLUDING

EXCAVATION OF PIT & REFILLING OF EARTH, FIXING CROSS ARMS, TOP

FITTING CLAMPS,ANTI-CLIMBING DEVICES DANGER BOARD, INSULATORS

ETC. COMPLETE AND PAINTING OF STEEL POLES, FABRICATED

MATERIALS USED ON THE POLES AND NUMBERING WITH COSTOF PAINT

AS PER STANDARD SPECIFICATION BUT EXCLUDING ERECTION OF GUY

SETS AND EARTHING.

ERECTION OF DOUBLE POLE STRUCTURE OF 8 METERS 200 KG PSC

POLES INCLUDING EXCAVATION OF PITS & REFILLING OF EARTHING,

FIXING OF CHANNELS, SUPPORTING ANGLES,CLAMPS, ANTI-CLIMBING

5 9926000005 DEVICES DANGER BOARDS,INSULATORS ETC.COMPLETE AND PAINTING No.

OF FABRICATED MATERIALS USED ON THE POLES AND NUMBERING WITH

COST OF PAINT AS PER STANDARD SPECIFICATION BUT EXCLUDING

ERECTION OF GUY SETS AND EARTHING.(WITHOUT AB SWITCH)

ERECTION OF DOUBLE POLE STRUCTURE OF 9 TO 11 METERS.STEEL

POLE INCLUDING EXCAVATION OF PITS & REFILLING OFEARTH, FIXING OF

CHANNELS, SUPPORTING ANGLES, CLAMPS,ANTI-CLIMBING DEVICES

DANGER BOARDS, INSULATORS ETC.COMPLETE & PAINTING OF

POLES,FABRICATED MATERIALSUSED ON THE POLES AND NUMBERING

WITH COST OF PAINTSAS PER STANDARD SPECIFICATION BUT

EXCLUDING ERECTION OF GUY SET AND EARTHING.(WITHOUT AB

ERECTION OF DOUBLE POLE STRUCTURE WITH MOUNTING OF AB

SWITCH, HG FUSES OF 8 MTRS 200 KG PSC POLES INCLUDING

EXCAVATION OF PITS AND REFILLING OF EARTH,FIXING OF CHANNELS

SUPPORTING ANGLES, CLAMPS, ANTI-CLIMBING DEVICES, DANGER

BOARDS, INSULATORS,DOFUSES ETC. COMPLETE AND PAINTING OF

FABRICATED MATERIALS USED ON THE POLES AND NUMBERING WITH

COSTOF PAINT AS PER STANDARD SPECIFICATION BUT EXCLUDINGOF

ERECTION OF GUY SET AND EARTHING.(WITH AB SWITCH)

ERECTION OF DOUBLE POLE STRUCTURE WITH MOUNTING OF AB

SWITCH,HG FUSES, 9 TO 11 METERS STEEL POLES INCLUDING

EXCAVATION OF PITS AND REFILLING OF EARTH, FIXING OFCHANNEL,

SUPPORTING ANGLES, CLAMPS, ANTI-CLIMBING DEVICES , DANGER

BOARDS, INSULATORS, ETC. COMPLETE AND PAINTING OF POLES

FABRICATED MATERIALS USED ON THE POLES AND NUMBERING WITH

COST OF PAINT AS PER STANDARD SPECIFICATION BUT EXCLUDING

ERECTION OF GUY SET AND EARTHING.(WITH AB SWITCH)

ERECTION OF DOUBLE POLE STRUCTURES WITH MOUNTING OFAB

SWITCH, HG FUSES, TRANSFORMERS, LIGHTENING ARRESTORS,

DISTRIBUTION BOX. OF 8 METER,200KG PSC POLE METERS POLES

INCLUDING EXCAVATION OF PITS AND REFILLING OF EARTH, CARTING OF

TRANSFORMERS FROMSTORES TO SITE, FIXING OF CHANNELS,

9 9926000009 SUPPORTING ANGLES,BRACINGS CROSS ARMS CLAMPS, ANTICLIMBING No.

DEVICES DANGER BOARDS, CONDUCTOR AND CABLE WIRING

ETC.COMPLETE AND PAINTING OF FABRICATED MATERIALS USEDON THE

POLES AND NUMBERING WITH COST OF PAINT AS PER STANDARD

SPECIFICATION BUT EXCLUDING ERECTION OF GUY SETS AND

Sr. No. Item Code Description Unit FY 2024-25

ERECTION OF DOUBLE POLE STRUCTURE WITH MOUNTING OF AB

SWITCH,HG FUSES TRANSFORMERS, LIGHTENING ARRESTORS,

DISTRIBUTION BOX 9 TO 11 METERS STEEL POLES INCLUDING

EXCAVATION OF PITS & REFILLING OF EARTH CARTING OF

TRANSFORMERS FROM STORE TO SITE, FIXINGOF CHANNELS

SUPPORTING ANGLES, BRACING, CROSS ARMS,CLAMPS, ANTICLIMBING

DEVICES, DANGER BOARDS,CONDUCTOR AND CABLE WIRING ETC.

COMPLETE AND PAINTING OF POLES FABRICATED MATERIALS USED ON

THE POLES AND NUMBERING AS PER STANDARD SPECIFICATION BUT

EXCLUDING ERECTIONS OF GUY SETS AND EARTHING.

ERECTION OF GUY SET INCLUDING EXCAVATION OF PITS & REFILLING OF

EARTH AS PER STANDARD SPECIFICATION WITH STAY CLAMPS, STAY

WIRE, ANCHOR ROD, TURN BUCKLE, EYEBOLT, GUY INSULATOR, CEMENT

CONCRETE BLOCK ETC. BUT EXCLUDING CONCRETING.

CONCRETING OF POLES, GUYS, ETC. INCLUDING COST OF CEMENT SAND

12 9926000012 METAL (1:2:4) AND WATER ETC. AS PER STANDARD SPECIFICATION. CMT

(cement Should be 53 grade) used for Concreting.

ERECTION OF COIL TYPE EARTHING INCLUDING COST OF COAL,SALT ETC.

13 9926000013 BUT WITHOUT COST OF GI WIRE AS PER STANDARD SPECIFICATION(20kg No.

solt+20kg coal)

ERECTION OF GI PIPE/CI PLATE TYPE EARTHING INCLUDINGCOST OF

14 9926000014 COAL SALT ETC. BUT WITHOUT COST OF PIPE/GIPLATE GI WIRE AS PER No.

STANDARD SPECIFICATION.(20kg solt+20kg coal)

ERECTION OF STREET LIGHT FIXTURE COMPLETE WITH CLAMPS, BRASS

NIPPLE, BRASS HOLDER TECK WOOD BUSH,REFLECTORS FUSE, WIRING

ETC. AS PER STANDARD SPECIFICATION BUT EXCLUDING COST OF

STRINGING OF(30mm2)ACSR/34MM@,55MM2 AAA CONDUCTOR for ALL ONE

16 9926000016 TYPE OF CONDUCTOR (EXCEPT DOG CONDUCTOR) FOR 11/22KV & LT COND

LINES INCLUDING FIXING OF INSULATORS, BINDING JUMPERING ETC. PER KM

17 9926000017 STRINGING OF GI WIRE 8 SWG INCLUDING BINDING JUMPERING ETC. DO

PROVIDING SINGLE PHASE SERVICE CONNECTION WITH PVC 2.5/4MM2

TWIN CORE CABLE FROM TERMINAL POLE TO METERING POINT

18 9926000018 INCLUDING FIXING OF METER WITH METER EARTHING COMPLETE WORK No.

AS PER STANDARD SPECIFICATION BUT EXCLUDING COST OF

PROVIDING THREE PHASE 4 WIRE SERVICE CONNECTION WITH PVC

4MM2/10MM2 FOUR CORE CABLE FROM TERMINAL POLE TO METERING

19 9926000019 POINT INCLUDING FIXING OF METER WITH METER EARTHING COMPLETE No.

WORK AS PER STANDARD SPECIFICATION BUT EXCLUDING COST OF

ADDITIONAL COST FOR EXCAVATION OF PIT IN HARD ROCK AREA FOR

ERECTION OF POLE/ GUY ETC. AS PER STANDARD SPECIFICATION OVER

20 9926000020 & ABOVE NORMAL COST COVERED AGAINST EXCAVATION OF PIT UNDER No.

NORMAL SOIL FOR ERECTION OF POLE,GUY, DOUBLE POLE STRUCTURE

EARTHING WITH THE APPROVAL OF SUPDT.ENGINEER.

21 9926000021 PROVIDING GUARDING TO HT LINE ON ROAD/ RAIL CROSSING. MTR

22 9926000022 PROVIDING GUARDING OF LT LINES ON ROAD/RAIL CROSSING. MTR

23 9926000023 LT LINE TAPPING- SINGLE PHASE No.

24 9926000024 LT LINE TAPPING- THREE PHASE No.

Stringing/LAYING OF OVER HEAD LT CABLE FOR ROAD CROSSING,HT LINE

CROSSING AND TELEPHONE LINE CROSSING ETC.(PER SPAN)

ERECTION OF SINGLE POLE STRUCTURES WITH , HG

FUSES,TRANSFORMERS, LIGHTENING ARRESTOR, DISTRIBUTION BOX. ON

8 METERS 200 KGAND PSC POLE INCLUDING EXCAVATION OF PITS AND

REFILLING OF EARTH, CARTING OF TRANSFORMERS FROM STORES TO

SITE, FIXING OF CHANNELS, SUPPORTING ANGLES,BRACINGS CROSS

ARMS CLAMPS, ANTICLIMBING DEVICES DANGER BOARDS, CONDUCTOR

AND CABLE WIRING ETC.COMPLETE AND PAINTING OF FABRICATED

MATERIALS USED ON THE POLE AND NUMBERING WITH COST OF PAINT

AS PER STANDARD SPECIFICATION BUT EXCLUDING ERECTION OFGUY

SETS AND EARTHING.

Sr. No. Item Code Description Unit FY 2024-25

ERECTION OF SINGLE POLE STRUCTURES WITH MOUNTING OFAB SWITCH

, HG FUSES,TRANSFORMERS, LIGHTENINGARRESTOR, DISTRIBUTION

BOX. ON 9 to 11 METERS RSJ POLE INCLUDING EXCAVATION OF PITS

AND REFILLING OF EARTH, CARTING OF TRANSFORMERS FROM STORES

TO SITE, FIXING OF CHANNELS, SUPPORTING ANGLES,BRACINGS CROSS

ARMS CLAMPS, ANTICLIMBING DEVICES DANGER BOARDS, CONDUCTOR

AND CABLE WIRING ETC.COMPLETE AND PAINTING OF FABRICATED

MATERIALS USED ON THE POLE AND NUMBERING WITH COST OF PAINT

AS PER STANDARD SPECIFICATION BUT EXCLUDING ERECTION OFGUY

SETS AND EARTHING.

ERECTION OF PSC POLES OF 10 *270 KG INCLUDING EXCAVATION OF PIT

AND REFILLING OF EARTH, FIXING OF CROSS ARMS, TOP FITTING CLAMPS

ANTI-CLIMBING DEVICES, INSULATORS ETC. COMPLETE AND PAINTING OF

FABRICATED MATERIALS USED ON THE POLES AND NUMBERING WITH

COST OF PAINT AS PER STANDARD SPECIFICATION BUT EXCLUDING

ERECTION OF GUY SET AND EARTHING.

ERECTION OF DOUBLE POLE STRUCTURE OF 10 METERS 270 KG PSC

POLES INCLUDING EXCAVATION OF PITS & REFILLING OF EARTHING,

FIXING OF CHANNELS, SUPPORTING ANGLES,CLAMPS, ANTI-CLIMBING

29 9926000029 DEVICES DANGER BOARDS,INSULATORS ETC.COMPLETE AND PAINTING No.

OF FABRICATED MATERIALS USED ON THE POLES AND NUMBERING WITH

COST OF PAINT AS PER STANDARD SPECIFICATION BUT EXCLUDING

ERECTION OF GUY SETS AND EARTHING.(WITHOUT AB SWITCH)

STRINGING OF 100MM2 ACSR/100MM2 AAAC CONDUCTOR FOR 11/22KV &

LT LINES INCLUDING FIXING OFINSULATORS, BINDING JUMPERING ETC.

STRINGING OF DOG CONDUCTOR FOR 11/22KV & HT LINES INCLUDING

FIXING OF INSULATORS, BINDING JUMPERING ETC.

ERECTION OF DOUBLE POLE STRUCTURES WITH MOUNTING OF AB

SWITCH, HG FUSES, TRANSFORMERS, LIGHTENING ARRESTORS,

DISTRIBUTION BOX. OF 10 METERS 270 KGAND PSC POLES INCLUDING

EXCAVATION OF PITS AND REFILLING OF EARTH, CARTING OF

TRANSFORMERS FROMSTORES TO SITE, FIXING OF CHANNELS,

32 9926000032 SUPPORTING ANGLES,BRACINGS CROSS ARMS CLAMPS, ANTI-CLIMBING No.

DEVICES,DANGER BOARDS, CONDUCTOR AND CABLE WIRING

ETC.COMPLETE AND PAINTING OF FABRICATED MATERIALS USED ON THE

POLES AND NUMBERING WITH COST OF PAINT AS PER STANDARD

SPECIFICATION BUT EXCLUDING ERECTION OF GUY SETS AND

DISMENTALLING OF 8 MTR PSC POLE WITH CREDITING OF FABRICATION

33 9926000033 AT STORE & STACKING OF POLE SAFELY ON ROAD SIDE OR CREDITING No.

TO DEPARTMENTAL STORE

DISMENTALLING OF 10 MTR PSC POLE WITH CREDITING OF FABRICATION

34 9926000034 AT STORE & STACKING OF POLE SAFELY ON ROAD SIDE OR CREDITING No.

TO DEPARTMENTAL STORE

DISMENTALLING OF TRANSFORMER CENTRE (8 MTR PSC POLE) (WITH

TRANSFORMER) WITH CREDITING OF FABRICATION & TRANSFORMER AT

STORE & STACKING OF POLE SAFELY ON ROAD SIDE OR CREDITING TO

DEPARTMENTAL STORE

DISMENTALLING OF TRANSFORMER CENTRE (8 MTR PSC POLE) (WITHOUT

TRANSFORMER) WITH CREDITING OF FABRICATION AT STORE &

STACKING OF POLE SAFELY ON ROAD SIDE OR CREDITING TO

DEPARTMENTAL STORE

STRINGING OF LT ABC OF 1*35 SQ MM + 1*25 SQ MM INCLUDING FITTING

OF ALL ACESSARIES I.E. SPECIAL DESIGN SUSPENSION / TENSION CLAMP,

FIXING OF CROSS ARM, LT SHACKLE INSULATOR ETC. FOR FIXING OF

37 9926000037 MESSENGER WIRE AND TO PROVIDE SERVICE CONNECTION ON AERIAL KM

BUNCH CABLE BY INSULATED PIERCEING CONNECTORS THROUGH

SERVICE CONNECTION BOX COMPLETE AS REQUIRED & DIRECTED BY

ENGINEER IN CHARGE.

STRINGING OF LT ABC OF 3*50 SQ MM +1*25 SQ MM+1*35 SQ MM

INCLUDING FITTING OF ALL ACESSARIES I.E. SPECIAL DESIGN

38 9926000038 SUSPENSION / TENSION CLAMP, FIXING OF CROSS ARM, LT SHACKLE KM

INSULATOR ETC. FOR FIXING OF MESSENGER WIRE AND TO PROVIDE

SERVICE CONNECTION ON AERIAL BUNCH CABLE BY INSULATED

PIERCEING CONNECTORS THROUGH SERVICE CONNECTION BOX

COMPLETE AS REQUIRED & DIRECTED BY ENGINEER IN CHARGE.

Sr. No. Item Code Description Unit FY 2024-25

STRINGING OF 11KV ABC OF 3*95 SQ MM +80 SQ MM INCLUDING FITTING

OF ALL ACESSARIES I.E. SPECIAL DESIGN SUSPENSION / TENSION CLAMP,

39 9926000039 FIXING OF CROSS ARM, BINDING TO PIN INSULATOR,PREPARING KM

SHACKLE POINT,JUMPERS ETC. AS REQUIRED & DIRECTED BY ENGINEER

STRINGING OF 22 KV ABC OF 3*70 SQ MM +95 SQ MM INCLUDING FITTING

OF ALL ACESSARIES I.E. SPECIAL DESIGN SUSPENSION / TENSION CLAMP,

40 9926000040 FIXING OF CROSS ARM, BINDING TO PIN INSULATOR,PREPARING KM

SHACKLE POINT,JUMPERS ETC. AS REQUIRED AND DIRECTED BY

ENGINEER IN CHARGE

STRINGING OF LT ABC OF 2*50 SQ MM +1*25 SQ MM+ 35 SQ MM INCLUDING

FITTING OF ALL ACESSARIES I.E. SPECIAL DESIGN SUSPENSION /

TENSION CLAMP, FIXING OF CROSS ARM, LT SHACKLE INSULATOR ETC.

41 9926000041 FOR FIXING OF MESSENGER WIRE AND TO PROVIDE SERVICE KM

CONNECTION ON AERIAL BUNCH CABLE BY INSULATED PIERCEING

CONNECTORS THROUGH SERVICE CONNECTION BOX COMPLETE AS

REQUIRED & DIRECTED BY ENGINEER IN CHARGE.

DISMENTALING OF RSJ (9/11 METER) POLE AND CREDITING THE OLD

MATERIAL TO STORE

DISMENTALING OF TRANSFORMER CENTER ON 10MTR,270KG PSC

POLE(WITHOUT TRANSFORMER) WITH CREDITING OF FABRICATION AT

STORE AND STACKING OF POLE SAFELY ON ROAD SIDE OR CREDITING

TO DEPARTMENTAL STORE

DISMENTALING OF TRANSFORMER CENTER ON 10MTR,270KG PSC

POLE(WITH TRANSFORMER) WITH CREDITING OF FABRICATION AT STORE

AND STACKING OF POLE SAFELY ON ROAD SIDE OR CREDITING TO

DEPARTMENTAL STORE

DISMENTLING OF 11KV ABC OF 3*95 SQ MM +80 SQ MM AND CREDITING

45 9926000045 FITTING OF ALL ACESSARIES AND FABRICATION TO DEPARTMENTAL KM

DISMENTLING OF 22 KV ABC OF 3*70 SQ MM +95 SQ MM AND CREDITING

46 9926000046 FITTING OF ALL ACESSARIES AND FABRICATION TO DEPARTMENTAL KM

DISMENTALING OF LT ABC OF 1*35 SQ MM + 1*25 SQ MM AND CREDITING

FITTING OF ALL ACESSARIES TO DEPARTMENTAL STORE.

DISMENTALING OF LT ABC OF 3*50 SQ MM +1*25 SQ MM+1*35 SQ MM AND

CREDITING FITTING OF ALL ACESSARIES TO DEPARTMENTAL STORE.

DISMENTALING OF LT ABC OF 2*50 SQ MM +1*25 SQ MM+ 35 SQ MM AND

CREDITING FITTING OF ALL ACESSARIES TO DEPARTMENTAL STORE.

RESTRINGING OF ALL TYPE OF CONDUCTOR (EXCEPT DOG CONDUCTOR) ONE

50 9926000050 FOR 11/22KV & LT LINES INCLUDING FIXING OF INSULATORS, BINDING COND

JUMPERING ETC. PER KM

RESTRINGING OF DOG CONDUCTOR FOR 11/22KV HT LINES INCLUDING

BINDING JUMPERING ETC.

LABOUR CHARGE FOR THE INSTALLATION OF NEW DTR METER. (METER

WILL BE PROVIDED BY DGVCL)

LABOUR CHARGE FOR THE REPLACEMENT OF DTR METER AND OLD

53 9926000053 METER SHOULD BE CREDITED TO SDN STORE. (METER WILL BE No.

PROVIDED BY DGVCL)

LABOUR CHARGE FOR PROVIDING CT COIL FOR DTR METER

CONNECTION. (CT COIL WILL BE PROVIDED BY DGVCL)

LABOUR CHARGE FOR REPLACEMENT OF CT COIL FOR DTR METER

55 9926000055 CONNECTION AND OLD CT SHOULD BE CREDITED TO SDN STORE. (CT PER CT

COIL WILL BE PROVIDED BY DGVCL)

LABOUR CHARGE FOR FIXING OF MMB FOR DTR METER (MMB WILL BE

PROVIDED BY DGVCL)

LABOUR CHARGE FOR REPLACEMENT OF DTR METER BOX. (METER WILL

BE PROVIDED BY DGVCL)

PROVIDING / REPLACEMENT OF 1.5 SQ MM 10 CORE COPPER CABLE

METER (CABLE TO BE PROVIDED BY AGENCY)

LABOUR CHARGE FOR PROVIDING/RECONNECTION OF TERMINAL PER

59 9926000059 CONNECTION WITH PROPER SIZE OF LUGS. (LUGS COST IS BORNE BY TERMINA

LABOUR CHARGE FOR THE SPOT READING OF DTR METER WITH DETAIL

SURVEY OF DEFECT IF ANY. A DULY SIGN COPY BY SURVEYOR PERSON

OF AGENCY IN PRO-FORMA REPORT SHOULD BE SUBMITTED TO SDN

OFFICE.(* ONLY IF ALL PARAMETER OF VOLTAGE, CURRENT & LOAD AS

SHOWN IN PER-FORMA IS FILLED) AS PER THE INSTRUCTION OF

ENGINEER IN-CHARGE.

Sr. No. Item Code Description Unit FY 2024-25

LABOUR CHARGE FOR THE SPOT READING OF DTR METER WITH DETAIL

SURVEY OF DEFECT IF ANY. A DULY SIGN COPY BY SURVEYOR PERSON

61 9926000061 OF AGENCY IN PRO-FORMA REPORT SHOULD BE SUBMITTED TO SDN PER DTR

OFFICE. (DULY FILL PER-FORMA IN FAULT CONDITION IN WHICH READING

PARAMETER IS NOT SHOWN IN METER)

INSTALLATION OF DTR METER INCLUDING METER BOX, PROVIDING &

FIXING OF 1.5SQ MM SINGLE STRAND 10 CORE ARMOURED COPPER

CABLE (3.5METER), TERMINATION IN METER & COIL ETC.(METER, METER

BOX, C.T./P.T. COIL WILL BE PROVIDED BY DGVCL)

INSTALLATION OF DTR METER INCLUDING METER BOX, TERMINATION IN

63 9926000063 METER & COIL ETC. (WITHOUT 10CORE COPPER CABLE) (METER, METER No.

BOX, C.T./P.T. COIL WILL BE PROVIDED BY DGVCL)

Binding of messanger Conductorat with a distance not more than 0.75 mtr with

64 9926000064 turns minimum on XLPE Cable with single strand binding wire (including cost of No

Supply and Installation of 11/22 kV Distribution Transformers HT Terminal

65 9926000086 protector (UV Resistance) with using 95/120/150 sq.mm long barrel aluminum lug. PER SET

(1Set = 3 Nos i.e. on R, Y, B)

Supply & Installation of HT EPR Tap on 11/22 kV Distribution Transformer with

replacement of bare conductor by HT ABC conductor (DO bottom side to

transformer) after removal of semi conductor by HT ABC (6 inch both side). HT

ABC to be supplied by DGVCL. (1Set = 3 Nos i.e. on R, Y, B)

Supply, Installation, Testing and Commissioning of Maintenance Free, Ready

Capsule, Pipe-In-Cage (Pic) Type, Earth Electrodes for HT Feeder Pole Having

2000 mm Electrode Length as per the Tender Specifications and Drawing. (All

Materials Will Be Supplied By Agency)

Supply, Installation, Testing and Commissioning of Maintenance Free, Ready

Capsule, Pipe-In-Cage (Pic) Type, Earth Electrodes for HT Feeder Pole Having

3000 mm Electrode Length as per the Tender Specifications And Drawing. (All

Materials Will Be Supplied By Agency)

Supply and Installation of 25 X 3 mm GI Strip having hot dip- galvanized-zinc

coating of 80-100 microns without any joints or welding. Both the end of the GI

strip should be connected with GI nut bolts and required fabrication work for giving

separate earthing connections to

69 9926000090 (1) Neutral of the transformer Meter

(2) MS structures of the transformer center (Approximately 25 meter GI strip per

transformer centre

- as per requirement and instruction of Engineer in- charge) (All Materials will

be supplied by Agency)

Supply and Installation of uPVC standard make Pipe of 1.25" diameter for covering

GI strip with UV protected Cable Ties of 550 X 7.6 mm size to bind with pole

face(Approximately 25 meter uPVC pipe for GI strip covering per transformer

centre -as per requirement and instruction of Engineer in-charge.

Supply & fixing of upto 33 kV Conducotr sleev for Busbar to Drop out Fuse and

71 9926000093 Drop out fuse to Transformer H.T. including Busbar (12 mm sleev) as per technical Per Tc

specification. (All Materials will be supplied by Agency)

Supply & fixing of upto 33 kV Conducotr sleev for Busbar to Drop out Fuse and

72 9926000094 Drop out fuse to Transformer H.T. including Busbar(15 mm sleev) as per technical Per Tc

specification. (All Materials will be supplied by Agency)

Supply & fixing of upto 33 kV Conducotr sleev for Busbar to Drop out Fuse and

73 992600100 Drop out fuse to Transformer H.T. without Busbar (12 mm sleev) as per technical Per Tc

specification. (All Materials will be supplied by Agency)

Supply & fixing of upto 33 kV Conducotr sleev for Busbar to Drop out Fuse and

74 992600101 Drop out fuse to Transformer H.T. without Busbar (15 mm sleev) as per technical Per Tc

specification. (All Materials will be supplied by Agency)

Supply & fixing of Disc type Red Color FRP(Non-flammable) material with Weather

resistant, Non-conductive bird guard OD=300 MM, ID=33 MM, Width =1.25 MM,

one side cut from ID to OD. (All Materials will be supplied by Agency)

Providing and fixing of LT Terminal protectors i.e. Re-useable boot (LT Side

76 9926000096 kV) including LT (1.1 kV) insulating taps. All live part at LT side shall be covered No

with fixing of LT insulating taps.

77 Nylon Net around Transformer Center

77.1 9926000097 Nylon Net (12 * 15 ft) Per Net

77.2 9926000098 Nylon Dori Per TC

Labour charge for fitting Nylon Net (All fabricated material for fitting nylon net shall

be provided by DGVCL)

Sr. No. Item Code Description Unit FY 2024-25

Name of Work : Work of ARC for Erection of HT/LT Line and TC work and other maintenance work and O/H XLPE Cable under mainly for Gujarat wire free

city mission and other scheme if required for Rander Rural sub division under Olpad (R) division and if required work to be carried out at other sub

division under Olpad (R) Division.

Sr. No. Item Code Item Unit FY 2024-25

Providing and fixing of pipe type earthing from 80 mm dia class-B GI pipe with pit to be

filled with salt & coke and construction of chamber as per DGVCL Drg. No. dg /100 for DP

1 9925000016 and cable. The earthing pit should be joined with cable by G.I. strip of size 1” width & 2 No.

mm thick. All material GI pipe, Coke, Salt etc will be supplied by bidder.

Supply & fixing of heat shrink type end terminations (outdoor) for upto 11kV 3C x

mm2 size XLPE cable as per DGVCL technical specification

3 9925000019 Supply & fixing of heat shrink type end terminations (indoor) for upto 11kV 3C x 185 mm2 No.

size XLPE cable as per DGVCL technical specification)

4 9925000021 Supply & fixing of heat shrinkable straight through joint for upto 11kV 3C x 185 mm2 size No.

XLPE cableas per DGVCL technical specification.

Labour charge for excavation of 2100mm long x 1200mm wide x 1200 mm deep joint pits

5 9925000023 for installation of 11kV / 22kV Straight through joints as per instruction of engineer-in- No.

charge & covering the cable with 150 mm dia (Outer), thickness 25 mm, 1.0 meter long

RCC half round muffs & refilling same as per instruction of EIC .

Testing of cable at various points and commissioning the feeder as per instruction of

6 9925000025 engineer-in-charge.Test result shall be submitted by contractor with bill. No.

Preparation and submission of 6 (six) copies, of complete layout drawings with GIS

7 9925000026 mapping as per actual cable routing showing road crossing, HDPE pipe sleeving, jointing Set

locations, markers etc.

8 9925000060 Labour charges for Lying of O/H XLPE cable pole to pole KM

Name of Work : Work of ARC for Erection of HT/LT Line and TC work and other maintenance work and O/H XLPE Cable under mainly for Gujarat wire free

city mission and other scheme if required for Rander Rural sub division under Olpad (R) division and if required work to be carried out at other sub

division under Olpad (R) Division.

No. Item Code Details of works Unit FY 2024-25

(A) LINE MAINTENANCE

1 9924000001 Cutting of Tree branches surounding HT/LT line Per Tree

2 9924000002 Replacement of old jumpers & providing new double jumpers with 8" binding [D Type] & No.

capsuling with PVC pipe etc

3 9924000005 Support pole for Stay PSC/STP/RSJ No.

4 9924000006 Pin binding of conductor 11/22kv Pin insulator No.

5 9924000007 Pin binding of conductor 11/22kv Pin insulator per pole in costle area with cleaning . No.

6 9924000008 Pin binding of conductor LT shakel insulator No.

7 9924000009 Replacement of one/both disc.insulator at strain pole No.

8 9924000010 Replacement of LT shackle insulator at cut point No.

9 9924000011 Refixing of V cross Arm No.

10 9924000012 Replacement of V cross Arm (With Transportation & Painting) No.

11 9924000013 Refixing of Top fitting in proper position No.

12 9924000014 Replacement of Top fitting No.

13 9924000015 Replacement of LT cross Arm No.

14 9924000016 Providing DO fuse on DP with carting & jumpuring(ONE DO FUSE) No.

15 9924000017 Numburing of pole with paint by preparing back ground of one colour and have No.

lettering(height 3" * width 0.5") using stensil

16 9924000018 Fixing of MMB(1PH.) at consumer end No.

17 9924000019 Fixing of MMB(3PH.) at consumer end No.

18 9924000020 Replacement of (1ph.) meter for Urban area No.

19 9924000021 Replacement of (1ph.) meter for Rural area No.

20 9924000022 painting consumer no. on MMB (Urban) (with letter size height 40mm* width 8mm) No.

21 9924000023 painting consumer no. on MMB (Rural) (with letter size height 40mm* width 8mm) No.

22 9924000024 Replacement of deteriorated Single phase Service line No.

23 9924000025 Fixing of new dist. Box with complete wiring including clamps,nut bolts etc. No.

24 9924000026 Reparing of guarding involving reshaping of bearer wire cross lacing binding etc. R Mtr.

25 9924000027 Painting of steel fabricated material of RSJ DO DP structure with paint No.

26 9924000028 Painting of steel fabricated material of RSJ pole mounted transformer double pole No.

structure with paint

27 9924000029 Painting of steel fabricated material of RSJ single pole with paint No.

28 9924000030 painting of steel fabricated material of PSC Single pole (HT line) with paint No.

29 9924000031 painting of steel fabricated material of PSC DO DP double pole with paint No.

Sr. No. Item Code Description Unit FY 2024-25

30 9924000032 painting of steel fabricated material of PSC double pole at pole mounted transformer No.

31 9924000033 Providing line seperater single phase No.

32 9924000034 Providing line seperater three phase No.

33 9924000035 Replacement / Providing of stay insulator along with adjustment of tension in stay wire No.

34 9924000036 Replacement of deteriorated /providing LT dist. Box with new up to 100KVA capacity & No.

crediting it to store.

35 9924000037 Replacement of deteriorated /providing LT dist. Box with new above 100KVA capacity & No.

crediting it to store.

36 9924000038 Adjustment of tension in stay wire No.

37 9924000039 Refitting of LA No.

38 9924000040 Converting pin point to Shackle point including dismentaling & restringing etc. location

39 9924000041 replacement of 11KV Pin insulator with providing new double pin binding No.

40 9924000042 replacement of 22KV Pin insulator by new 11kv pin insulator with spares & providing new No.

double pin binding

41 9924000043 Providing 11kv double disc insulators with binding & restringing No.

42 9924000045 Replacement of existing 11kv conductor (all size) with new double pin binding Cond/KM

43 9924000046 Plumbing of PSC Pole with straightening at pin point No.

44 9924000047 Plumbing of PSC Pole with straightening at tension point No.

45 9924000048 Plumbing of tilted DP structure (PSC/RSJ/STP) with refilling of stone Murrum etc. No.

46 9924000049 Providing new 11kv AB /GO switch with fabrication and insulated colour code jumper, Set

binding, lugs etc

47 9924000051 Replacement of old 11kv AB /GO switch with providing new insulated jumper, binding, Set

48 9924000052 Providing cage type loop guard in verticle LT line with using PVC reel insulators etc per pole

Labour charges for replacement /providing of MMB & service with all accessories for

49 9924000053 three phase connection No.

Labour charges for replacement /providing of MMB & service with all accessories for

50 9924000054 single phase connection No.

51 9924000055 Dismentalling of existing Dist.X'mer center(RSJ /STP POLE) 25/63/100/200 KVA with all No.

fabrication & creditig the old material to store

Disconnection from LT pole 1 phase

53 9924000057 Reconnection from LT pole 1 phase No.

( payment after receipt of R/C charges)

54 9924000058 Disconnection from LT pole 3 phase No.

55 9924000059 Reconnection from LT pole 3 phase No.

( payment after receipt of R/C charges)

56 9924000060 Dismentaling & removing of service line from pole & crediting to S/dn (1 ph.) No.

57 9924000061 Dismentaling & removing of service line from pole & crediting to S/dn (3 ph.) No.

58 9924000062 Reconnection of service line complete with PVC cable (1 Ph) No.

59 9924000063 Reconnection of service line complete with PVC cable (3 Ph) No.

Providing spiral type earthing by G.I. NO 8(weight 2kg -5mtr in length) with salt and coal

60 9924000064 10kg each, including pvc rigid pipe 20mm dia( 1.5mtr length) to pass exposed part of G.I. No.

wire at consumer end with all materials, earth resistance should be less than 2 ohms

Providing and fixing of signle core 1.5 sq mm single strand copper insulated cable with

cable nail clip for spiral type earthing at consumer end. The end of G.I. no 8 is to be

connected by connector with copper cable of which other end shall be connected to the

61 9924000070 earth terminal of meter box. This item shall be used in location where there is more per meter

distance between earth terminal and earthing terminal of meter. (All materials supplied

Stringing of LT ABC of 1*35 SQ MM + 1*25 SQ MM including fitting of all acessaries i.e.

special design suspension / tension clamp, fixing of cross arm, LT shackle insulator etc. for

62 9924000065 fixing of messenger wire and inclusive of dismantling charge of existing bare conductor KM

and crediting in to store & dismentaling of service line from LT bare conductor and to

provide service connection on Aerial Bunch Cable by insulated pierceing connectors

through service connection box complete as required & directed by Engineer in Charge.

Stringing of LT ABC of 3*50 SQ MM +1*25 SQ MM+1*35 SQ MM including fitting of all

acessaries i.e. special design suspension / tension clamp, fixing of cross arm, LT shackle

insulator etc. for fixing of messenger wire and inclusive of dismantling charge of existing

63 9924000066 bare conductor and crediting in to store & dismentaling of service line from LT bare KM

conductor and to provide service connection on Aerial Bunch Cable by insulated pierceing

connectors through service connection box complete as required & directed by Engineer

Stringing of 11KV ABC of 3*95 SQ MM +80 SQ MM including fitting of all acessaries i.e.

special design suspension / tension clamp, fixing of cross arm, binding to pin

64 9924000067 insulator,preparing shackle point,jumpers etc. and inclusive of dismantling charge of KM

existing bare conductor and crediting in to store complete as required & directed by

Engineer in Charge

Sr. No. Item Code Description Unit FY 2024-25

Stringing of 22 KV ABC OF 3*70 SQ MM +95 SQ MM including fitting of all acessaries i.e.

special design suspension / tension clamp, fixing of cross arm, binding to pin

65 9924000068 insulator,preparing shackle point,jumpers etc. and inclusive of dismantling charge of KM

existing bare conductor and crediting in to store complete as required & directed by

Engineer in Charge

Stringing of LT ABC of 2*50 SQ MM +1*25 SQ MM+ 35 SQ MM including fitting of all

acessaries i.e. special design suspension / tension clamp, fixing of cross arm, LT shackle

insulator etc. for fixing of messenger wire and inclusive of dismantling charge of existing

66 9924000069 bare conductor and crediting in to store & dismentaling of service line from LT bare KM

conductor and to provide service connection on Aerial Bunch Cable by insulated pierceing

connectors through service connection box complete as required & directed by Engineer

Total Part -A+B

In Words : -Fifty Lakh Rupees Only

% Above/Below of Estimate Amount

Stamp & Sign of Contractor

Executive Engineer (O&M)

DGVCL, Olpad Rural Division