SPECIAL REPAIR TO BUILDING NO P 79 SURJAN SINGH AUDITORIUM AT GRRC LANSDOWNE UNDER AGE LANSDOWNE

Amount

Demolition of brickwork built in cement mortar or cement lime mortar including all quoins, arches, pillars etc complete all as specified and directed.

M&L for cement concrete (1:3:6), type C-1 using 20mm graded stone agg as in copings, kneelers complete all as specified and directed.

M&L for brick work with Sub class 'B' bricks straight or curved on plan exc 6m mean radius built in cement mortor 1:4.complete all as specified and directed.

M & L for brick work with sub class 'B' bricks straight or curved on plan to any redius built in half brick thick wall built in cm 1:4 (Using old size brick) complete all as specified and directed.

S&F in repair PVC (SWR) pipes, 110mm bore, ISI Marked duly approved by AGE(I) , single socketed in any length with rubber ring joinsts fixed to wall complete all as specified and directed.

Taking up or down steel tubing 15mm dia bore and connections including cleaning for refixing or removal to store complete all as specified and directed.

Taking up or down steel tubing 20mm dia bore and connections including cleaning for refixing or removal to store complete all as specified and directed.

Taking down cement plaster, any desription on brick or stone walls including raking out joints hacking for key, scrubbing down with water etc and including removing unserviceable material,outside of A 1 defence land complete all as specified and directed.

Dismantling boarding, any description, fixed in any position with nails complete all as specified and directed.

Dismantling of asbestos cement/transculent sheet corrugated/ semi-corrugated sheets in roof coverings incl ridges complete all as specified and directed.

Dismantling of wall and ceiling board (fibre,insulation etc) or insulation board ,slabs,blankets, any thickness incl cover fillets complete all as specified and directed.

Disconnecting existing PVC water tank,capacity exc. 250 ltr and n.exc 500 ltr setting aside (or lowering if required) for repairs, cleaning etc & hoisting if required reconnecting and refixng in same position complete all as specified and directed.

Taking down Chowkats or frames incl. shutters (without taking of shutter from the frames) n. exc 1.50 Sqm each complete all as specified and directed.

Taking down Chowkats or frames incl. shutters (without taking of shutter from the frames) exc 1.50 Sqm and not exc 4 sqm complete all as specified and directed.

Taking down shutters of any description exc. 2.00 Sqm each complete all as specified and directed.

S&F Pre-painted galvalume aluminium zinc coating AZ-150 GI based corrugated steel sheet 0.50mm thick of any colour (ISI Marked) having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws complete all as specified and directed.

S&F pre-painted galvalume aluminium zinc coating AZ-150 GI based plain steel sheet 0.50mm thick (ISI Marked) of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws complete all as specified and directed.

M & L for Rendering 15 mm thick in two coats i.e. 10mm thick in CM 1:6 and 5mm thick in CM 1:4 using water proofing liquid compound as per manufacturer's instructions on other than fair faces brick or concrete surfaces and finishing surfaces even & smooth without using extra cement complete all as specified and directed. Note :- Water proofing liquid compound shall be measured and paid separately.

Material & labour for Rendering 10 mm thick CM 1:6 on concrete surfaces finished even & smooth without using extra cement complete all as specified and directed..

Material & labour for Rendering 5 mm thick CM 1:3 on concrete surfaces of ceiling /chajja's finished even & smooth without using extra cement complete all as specified and directed.

Material & Labour for 300X450X 8 to 9 mm thick: coloured glazed ceramic tiles of any design and pattern, as in dado etc. Set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of the tiles. Tiles shall be confirming to IS-15622:2017, Group B III with average water absorption between 10% to 15%. Length, width and straightness of sides + 0.20% (Max deviation). Thickness + 4.0% (Max deviation). Straightness of sides and Rectangularity +0.15% (Max Deviation). surface flatness + 0.22% (Max deviation). Breaking strength 500 N (Minimum) and minimum 95% tiles shall be free from visible defects. including 10 mm thick in cm (1:4) backing coat and including dismantling of old tiling and including removing unserviceable material,outside of A 1 defence land complete all as specified and directed. Note:- Shade of the tiles including Colour, design and pattern shall be approved by AGE(I) Lansdowne

Material & Labour for 400x400x 7 to 8mm thick joint free Non-Skid coloured ceramic tiles of any design and pattern, 7 to 8 mm thick (Square/rectangular) area of each tiles exceeding 0.11 Sqm and not exc. 0.16 Sqm, in floor etc. Set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of the tiles. Tiles shall be confirming to IS-15622.2006, Group B II with average water absorption between 3% to 6%. Length, width and straightness of sides + 0.10% (Max deviation). Thickness + 5.0% (Max deviation). Centre & Edge curvature and warpage + 0.50% (Max deviation). Breaking strength 1000 N (Minimum) and minimum 95% tiles shall be free from visible defects. including 15 mm thick screed bed in cm 1:6 including dismantling of existing old tile and including removing unserviceable material,outside of A 1 defence land . complete all as specified and directed. Note:- Shade of the tiles including Colour, design and pattern shall be approved by AGE(I)

Material & Labour for 600X600X 9 to 10 mm thick coloured Vitrified tiles of any design and pattern as in floor etc. Set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of the tiles. Tiles shall be confirming to IS-15622:2017, Group B1b with average water absorption between 0.08% to 3%. Length, width and straightness of sides + 0.10% (Max deviation). Thickness + 4.0% (Max deviation). Centre & Edge curvature and warpage + 0.20% (Max Deviation). Breaking strength 1200 N (Minimum) and minimum 95% tiles shall be free from visible defects. including and over screed bed or bedding layer of mortar 15mm thick for laying of floor finishes in CM 1:4 including dismantling of existing old tile and including removing unserviceable material,outside of A 1 defence land complete all as specified and directed. Note:- Shade of the tiles including Colour, design and pattern shall be approved by AGE(I)

S& F for GI tubing 15mm bore, medium grade ISI marked with all fittings(such as bends, elbows, Tee short pieces, connectors, back nuts, diminishing pieces, caps and plugs, unions, including short lengths etc.) ( heavy grade ISI Marked) , fixed to walls, concealed in wall and ceiling or laid in floor complete complete all as specified and directed.

S& F for GI tubing 20 mm bore, medium grade ISI marked with all fittings(such as bends, elbows, Tee short pieces, connectors, back nuts, diminishing pieces, caps and plugs, unions, including short lengths etc.) ( heavy grade ISI Marked) , fixed to walls, concealed in wall and ceiling or laid in floor complete complete all as specified and directed.

Refixing old steel tubing of 15 mm bore and connections in new or old position (walls, ceilings, floors etc.) together with all fittings heavy duty (ISI Marked ) (such as bends, elbows, tees, short pieces, connectors, back nuts, diminishing pieces, caps, plugs and unions etc.) and fixed complete to walls and ceiling with clips, wall hooks, wooden plugs or laid in floors Complete all as specified and directed Note:- Old servicable tubing obtainted from item No 06 shall be reused in this item.

Refixing old steel tubing of 20 mm bore and connections in new or old position (walls, ceilings, floors etc.) together with all fittings heavy duty (ISI Marked ) (such as bends, elbows, tees, short pieces, connectors, back nuts, diminishing pieces, caps, plugs and unions etc.) and fixed complete to walls and ceiling with clips, wall hooks, wooden plugs or laid in floors Complete all as specified and directed Note:- Old servicable tubing obtainted from item No 07 shall be reused in this item.

Demolition of plain cement concrete in ground floor & paving not exc 15 cm thick above or below ground level and removing unserviceable material,outside of A 1 defence land complete all as specified and directed.

Material & labour PCC (1:3:6) Type C-1 (using 20 mm graded stone aggregate) , 75 mm thick as in plinth protection and finishing surfaces even & smooth without using extra cement including mist filling in the joint complete all as specified and directed.

S & F in repair CI Nahani trap 75 mm dia (ISI Marked as approved by AGE(I) with grating including jointing to waste pipe fixed in cement concrete 1:2:4 type B1 (using 20mm graded stone aggregate) complete all as specified and directed

S&F in repair vitreous china wash down water closet pan (pedestal pattern) in single piece i.e WC and UF soft close slim seat cover , hinges , fixing assessory set , cistern & fitting size 655 x 365 x 765 mm , P trap 180 mm and fixed complete all as specified and directed. Make : Jaquar model Cat Part No LYS WHT 38851P180UFSM or equivalent model of make MARC or Hindware

S & F in repairs stainless steel kitchen sink 1.00 mm thick (ISI Marked as approved by AGE(I) for kitchen with plugs, washer and waste 32/40mm dia incl bedding in cement mortar on to dwarf wall or including fixing cantilever cast iron brackets and connecting union to waste pipe overall all size 495mmx420mm bowl size 410x330x160mm complete all as specified directed.

Supply and fixing PVC connection 15 mm dia, 450 mm long including brass ferrules on both ends (ISI Marked) complete all as specified and directed

S&F in repair sensor urinal , snow white of size 615X350X330 mm (Approved by AGE(I) including accessories with waste coupling and waste pipe complete all as specified and directed.Make : Jaquar model Cat Part No URS-WHT-0705 or equivalent model of make MARC or Hindware

S&F in repair vitreous china urinal, half stall type, white (excluding flushing cistern, flush pipe and waste pipe) (Approved by GE.AGE(I) complete all as specified and directed.Make : Jaquar Essco model Cat Part No ECS-WHT-253 or equivalent model of make MARC or Hindware

S & F CP brass urinal spreader for fixing with 15mm dia pipe, ISI Marked duly approved by GE/AGE(I) complete all as specified and as directed.Note- Chromium plated fitting shall be brought in store yard first as approved by AGE(I) and will be issued subsequently for fixing at site .

S& F in repair low density PVC pipe 32/40 mm dia as in waste pipe to sink , heavy duty ISI Marked duly approved by AGE(I) complete all as specified and directed

S&F in repair stack clamps out of 50mmx 5 mm flat iron and 16 mm dia round iron stays including bolts and nuts and securing ends of stays to walls or roof for 100 mm pipe, complete all as specified and directed.

S&F in repair 15 mm bore bib cock with wall flange fancy type chromium plated cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for union and fixed complete all as specified and directed . Make : Jaquar / MARC / Hindware .Note- Chromium plated fitting shall be brought in store yard first as approved by AGE(I) and will be issued subsequently for fixing at site .

S&F in repair Hand shower ( health faucet) with 1 mtr long long Easy flex Tube in chrome Finish and wall hook with N.R.V( Back Flow Preventer) tube & hook (braded Tube) Make : Jaquar model Cat Part No ALD-579 or equivalent model of make MARC or Hindware complete all as specified and directed. Note- Chromium plated fitting shall be brought in store yard first as approved by AGE(I) and will be issued subsequently for fixing at site .

S&F in repair vitrous china wash basin, oval type, white, oval size 435X375X130 mm , ISI Marked duly approved by AGE(I) excluding taps, waste, but fixing the same on granite, fixing of flush pipe, waste fitting, PVC connection and pillar tap complete all as specified and as directed.Make : Jaquar Essco model Cat Part No ECS-WHT-933or equivalent model of make MARC or Hindware

S&F in repair 15 mm bore chromium plated 3 hole basin mixer with pop up waste system centre hole mixer for mixing hot and cold water screwed down iron pipe and fixed complete all as specified and directed.Make : Jaquar / MARC / Hindware Note- Chromium plated fitting shall be brought in store yard first as approved by AGE(I) and will be issued subsequently for fixing at site .

S&F 15mm dia of pipe stop valves, fancy type and chromium plated with long shank and cup (concealed type) screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipes or for Unions and fixed make seiko complete all as specified and directed.Make : Jaquar / MARC / Hindware Note- Chromium plated fitting shall be brought in store yard first as approved by AGE(I) and will be issued subsequently for fixing at site

M&L for providing E-boards, ceiling, 4 mm thick with J framed work with main Tee of size 24 x 28.5 mm made out of PGI sheet .3 mm thick double at web and single at flange, flange coverd with powder coated sheet 0.25 mm thick and wall angle 24 x 24 x .45 mm powder coated for ceiling , ceiling boards 60cm x 60cm x 4mm thick , suspended with GI wire 2mm dia and 2m average length with adjustable hanging device complete including plugging in brick/stone walls with steel rawl plug @ 600 mm C/C Ceiling board shall be pressed to the ceiling tee with staple clips at all four sides and painted with two coats of oil bound distemper incl making good all the disturbed portion complete all as spd & directed by GE/Eng-in-Charge. Note:- AGE(I) will approved desgin and sample of materials

S & F Armstrong soft fibre acoustical suspended ceiling system with optra (Bevelled Tegular) edge tiles with Armstrong 15 mm exposed grid. The tile should have humidity resistance (RH) of 95 % , NRC 0.9 - 1.0 ,Light reflectance equal to 85 % , colour white , fire performance UK class 0 /class 1 (BS 476 pt - 6 & 7 ) in module size 600x600x15mm , suitable for green building application with recycled content of 66 % GW & 74 % RW. The tile shall be laid on Armstrong suprafine 32 with 15 mm wide T section flanges , colour white having rotary stitching on all T sections i.e the Main runner , 1200 mm & 600 mm cross tees with a web height of 38 mm and a load capacity of 14 Kgs / Sqm with a minimum pull out strength of 100 kgs. The T sections have a Galvanizing of of 90 gms /sqm and need to be installed with suspension system of Armstrong or equivalent , complete all as specified and directed.

Supply and fixing in repair of Front auditorium stage curtain of horizontal sliding curtain system made by Reliance velvet 450 GSM fabric as per approved colour . The curtain system mechanism totally belt free system straight curtain track heavy duty SS steel construction with 2 Nos of ball baring m/s pulley in end of track including 1 HP 220 volts motor flange type (Cromptom , Havells or Siemens) with suitable gear box , 2 nos of air breaker L & T , Siemens and two nos of micro switch for auto stop , 3 Nos of push button for reverse , forward and stop position , The curtain should be stitched with double gathering with golden border in the bottom and minimum overlap @ 900 mm in the centre Size Approx 16 Mtrs X 7 mtrs conplete all as specified and directed.Note:- AGE(I) will approved desgin and sample of materials

Supply and fixing in repair of Rear auditorium stage curtain of horizontal sliding curtain system made by Reliance Black glazed cotton fabric as per standard norms all as approved by AGE(I) Lansdowne . The curtain system mechanism totally belt free system straight curtain track heavy duty SS steel construction with 2 Nos of ball baring m/s pulley in end of track including 1 HP 220 volts motor flange type (Cromptom , Havells or Siemens) with suitable gear box , 2 nos of air breaker L & T , Siemens and two nos of micro switch for auto stop , 3 Nos of push button for reverse , forward and stop position , The curtain should be stitched with double gathering with golden border in the bottom and minimum overlap @ 900 mm in the centre Size Approx 16 Mtrs X 7 mtrs conplete all as specified and directed.Note:- AGE(I) will approved desgin and sample of materials (ii)The size of curtain may vary as per actual requirment on ground. The same shall be provided by the the firm with any additional cost in case it is on higer side.

M&L for preparation of old decorated surface of exterior wall by removing existing treatment with mechanical sander (rpm 1500-2700) along with internal dust extraction system for clean environment certified by reputed paint manufacturers, then washing the surface with Bleaching powder solution for treatment of fungal growth and applying two coats of exterior anti fungal acrylic emulsion paint (weather coat anti dust of Berger paint or equitant in Asian, nerolac having five years of performance warranty) over a coat of exterior water based primer of same make all as specified and prescribed by manufacture of paint and as directed at site by Engineer-in-Charge. Note: (i) The old surface must be prepared in a manner so that there should not be any impression of dent and it should be made even all as per manufacture instruction before application of distemper. The cost of materials, labour & T&P required for preparation of surface are demand to be included in the rates quoted. (ii). The work must be got executed through authorised applicator of manufacture after concluding an MoU with manufacture for company back guarantee by the contractor. The authorised applicator of manufacturer shall be got approved from GE/ AGE (I) before commencement of work. (iii). All the material to be incorporated in the work shall be brought by contractor to MES store yard which will be subsequently issued by deportment for incorporation in the work to ensure the quantity to be consumed all as per recommendation of manufacture. (iv). after carrying out preparation of surface the same shall be got approved from GE /AGE (I) before application of distemper for each building. (v). The colour / shade will be all as approved by AGE (I) (vi) The cost of Scaffolding wherever required are deemed to be included in the rates quoted by the contractor

M&L for preparation of newly plastered surface of external wall all as prescribed by manufacture of paint and applying two coats of exterior anti fungal acrylic emulsion paint (weather coat anti dust of Berger paint or equitant in Asian, nerolac having five years of performance warranty) over a coat of exterior water based primer of same make all as specified and prescribed by manufacture of paint and as directed at site by Engineer-in-Charge. Note:- 1. The newly plastered surface must be prepared in a manner so that there should not be any impression of dent and it should be made even all as per manufacture instruction before application of emulsion paint. The cost of all materials, T&P and labour required for preparation of surface are deemed to be included in the rates quoted. (ii). The work must be got executed through authorised applicator of manufacture after concluding an MoU with manufacture for company back guarantee by the contractor. The authorised applicator of manufacturer shall be got approved from GE/ AGE (I) before commencement of work. (iii). All the material to be incorporated in the work shall be brought by contractor to MES store yard which will be subsequently issued by deportment for incorporation in the work to ensure the quantity to be consumed all as per recommendation of manufacture. (iv). after carrying out preparation of surface the same shall be got approved from GE /AGE (I) before application of distemper for each building. (v). The colour / shade will be all as approved by GE / AGE (I) (vi) The cost of Scaffolding wherever required are deemed to be included in the rates quoted by the contractor

M&L for preparation of old decorated surface of internal wall by removing existing treatment with mechanical sander (rpm 1500-2700) along with internal dust extraction system for clean environment certified by reputed paint manufacturers and applying two coats of acrylic distemper using roller all as specified and prescribed by manufacturer of paint and all as directed at site by Engr-in-Charge . Note: (i) The old surface must be prepared in a manner so that there should not be any impression of dent and it should be made even and smooth all as per manufacture’s instruction before application of distemper. The cost of materials, labour & T&P required for preparation of surface are deemed to be included in the rates quoted. (ii). The work must be got executed through authorised applicator of manufacture after concluding an MoU with manufacture for company back guarantee by the contractor. The authorised applicator of manufacturer shall be got approved from GE/ AGE (I) before commencement of work. (iii). All the material to be incorporated in the work shall be brought by contractor to MES store yard which will be subsequently issued by deportment for incorporation in the work to ensure the quantity to be consumed all as per recommendation of manufacture. (iv). After carrying out preparation of surface the same shall be got approved from GE /AGE (I) before application of distemper for each building. (v). The colour / shade will be all as approved by GE / AGE (I)

M&L for preparation of newly plastered surface of internal wall by application of wall care putty to remove the dent and to make the surface even and smooth by grinding or rubbing with sand paper and applying two coats of acrylic distemper over a coat of primer using roller all as specified and prescribed by manufacture of paint and as directed at site by Engineer-in-Charge. Note:- (i) The new surface must be prepared in a manner so that there should not be any impression of dent and it should be made even and smooth all as per manufacture’s instruction before application of distemper The cost of all material T&P and labour required for preparation of surface are deemed to be included in the rates quoted . (ii). The work must be got executed through authorised applicator of manufacture after concluding an MoU with manufacture for company back guarantee by the contractor. The authorised applicator of manufacturer shall be got approved from GE/ AGE (I) before commencement of work. (iii). All the material to be incorporated in the work shall be brought by contractor to MES store yard which will be subsequently issued by deportment for incorporation in the work to ensure the quantity to be consumed all as per recommendation of manufacture. (iv). After carrying out preparation of surface the same shall be got approved from GE /AGE (I) before application of distemper for each building. (v). The colour / shade will be all as approved by GE / AGE (I)

M & L for preparation of old plastered surfaces of ceiling and applying two coats of white wash complete all as specified and directed

M & L for preparation of old steel surafces of any description over 10 cm width or girth & applying two caots of synthetic enamel paint Ist quality after removal of old existing treatments with help of thiner or other removing chemical materilas complete all as specified and directed

S&F flush shutters solid core construction with block board core and plywood face panels commercial type on both sides 40 mm thickness complete all as specified and directed.

S & F 300 mm Brass sliding door bolt (ISI Marked as approved by AGE(I) with sand or die cast brass hasp , staple (bolt type ) and fixing bolt with rolled or drawn brass bolts and fixed complete all as specified and directed.

S & F 150 mm extruded brass handles (ISI Marked as approved by AGE(I) , fabricated type polished complete all as specified and directed.

S & F 150 mm brass tower bolts (ISI Marked as approved by AGE(I) with cast or sheet barrel and rolled or cast bolt and fixed complete all as specified and directed.

S & F Butt hinges, 100 mm long stainless steel non magnetic ISI marked complete all as specified and directed..

M&L in repair for pre- polished granite slab machine cut of any shade as approved by GE of 16 to 18 mm thick including necessary notching, chamfering the edges over cement screed bed including Cutting, Grinding and Mirror polishing(Granite finish) with suitable grinding stones complete all as 'specified and as directed.

Supply and fixing Powder coated aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc complete all as specified and directed.

S&F Powder coated aluminium door shutters aluminium section weighing 0.55 Kg/m including necessary joining cleats, glazing clips, rubber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminium snap beading screws etc complete all as specified and directed.

S&F Powder coated aluminium windows and ventilator shutters aluminium section weighing 0.55 Kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading screws, locking arrangement etc complete all as specified and directed .

S&F for sheet glass 5.50 mm thick tinted quality and glazing,including fitting rubber gasket of approved quality , ISI Marked duly approved by AGE(I) complete all as specified and directed by Engineer-in-Charge.

S&F 12 mm thick Particle board , ISI Marked duly approved by GE/AGE(I) , medium density, flat pressed, single layer type or three layer type with BWR type adhesive fixed in Aluminium doors complete all as specified and directed .

S&F brass mortise lock (4 levers), vertical type, size 100mm long, ISI Marked duly approved by GE/AGE(I) complete all as specified and directed by Engr-in-Charge. Make Godrej /Link/ ISI marked

S&F Floor door stopper 150mm long of aluminium alloy body and tongue, ISI Marked duly approved by AGE(I) anodised, with hard drawn steel spring, fixed in floor complete all as specified and directed .

S & F double action floor spring hydraulically regulated made up of minimum 1.25mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, , ISI Marked duly approved by AGE(I) governing pivot made of brass, other parts made of mild steel heavy duty and fixed complete all as specified and directed by Engineer-in-Charge

S & F for PVC Panelling with PVC Panels of 8/9 mm thick and 250 mm wide interlocked type , ISI Marked duly approved by AGE(I) including angle or channels and necessary fittings such as rawl plug , screws , adhesive etc complete all as specified and directed. Make:- Syntex, Enchon, Rajshree

M & L for grinding & polishing (mirror polish) of existing Kota stone in floors and skirting and dados complete all as specified and directed.

S & F CP Toilet paper holder with flap and fixed complete all as specified and directed Make : Jaquar / MARC / Hindware .Note- Chromium plated fitting shall be brought in store yard first as approved by GE/AGE(I) and will be issued subsequently for fixing at site

M & L for (3-4 mm) thick decorative laminate (natural veneer) made of wood for surface finish, fixing on flat / curved surfaces in any size with colour pattern as approved fixed with approved adhesive as per manufactures instructions complete all as specified and directed. Make:- Century/archid/Green Ply

Taking down existing water proofing treatment including PCC padding, mortar etc and disposal rubbish out side MD land and hacking for key scrubbing down with water and removing unserviceable material,outside of A 1 defence land complete all as specified and directed.

M & L for 25mm thick PCC 1:2:4 type B-1 (Using 20 mm graded stone aggregate) as in padding over RCC roof complete all as specified and directed.

M&L of water proofing treatment to non-accessible roof slab with APP based modified polymeric membrane as per manufacturer’s instructions with following course of description below :- (a) Applying a priming coat of bituminious primer @ 0.30 Kg /Sqm, till the surface is properly impregnated. (b) Providing APP based 5 layer polymeric membrane minimum weighing 3 .6Kg/ Sqm and minimum 3 mm thick reinforced with polyester non-woven fabric (weight not less than 150 gms/sqm) centre core, laid on primed surface by forced applications as per the manufacturer's instructions with side over lap of 75 mm and end overlap of 100 mm. All overlap joints shall be sealed thoroughly by thermo fusing both the membrane layer (torching overlap by propane or butane gas torch ) and sealing it with the help of hot trowel. The overlap joints shall be made as a monolithic layer (c) Apply two coat of bituminous aluminium paint @ 0.20 Kg/Sqm over APP membrance Note : 1. The work of water proofing treatment shall be got executed through authorised applicator of the manufacturer only and 10 year company back warranty to be submitted by contractor 2. The work is required to be carried out at non-accessible roof slab for double storeyed. The contractor shall make arrangement of scaffolding, safety and security of workers and arrangement for approach to roof . The rates quoted shall deemed to be included for these items.)

M&L for metallic letters (block, Roman, Italic, English or Hindi) made out of 0.8mm thick stainless steel, height of each letter exceeding 100mm and not exceeding 200mm, width of letter exceeding 100mm and not exceeding 150mm, fixed to wall or granite with metalic screws complete all as specified and directed by engr-in-charge

All as per item No 76 above but arrows, dashes, commas, stops, hyphens, rackets etc complete all as specified and directed

All as per item No 76 but as in monograms (such as Garhwal Rifles Sign etc) , signs etc height not exceeding 450mm and width not exceeding 300mm complete all as specified and directed

Demolition of re-inforced cement concrete in any position not otherwise specifically provided for and removing unserviceable material,outside of A 1 defence land complete all as specified and directed.

M&L for Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work not exceeding 200 mm thick (Horizontal or Sloping) complete all as specified and directed.

M&L for reinforced cement concrete 1:2:4 type B-1 (using 20 mm graded stone aggregate) in slab supported on walls , beams and columns in roofs complete all as specified and directed.

M&L Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooking for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed

S&F structural rolled mild steel as in roof trusses (framed), purlins crane gantries, rail and fastenings and heavy brackets framing (beam, tee, angle, channel or flat section) including distance pieces, cleats etc of FE 290(Gde E 165) complete all as specified and directed.

S&F for Framed works such as grills , gratings etc with ends of bars shouldered and or / riveted , or forged into spikes , framed guard bars , barred iron doors framed balusters , Railing and similar work conforming to FE 290 Gde E -165 complete all as specified and directed.

S&F in repair corner glass shelf 200mm wide including necessary fixing arrangment complete all specified and directed. Make : Jaquar / MARC / Hindware

S&F in repair glass shelf 500x 125mm ISI marked as approved by GE/AGE(I) complete all as specified and directed. Make : Jaquar / MARC / Hindware

S&F in repair 20 mm dia bras Stainless Steel non Megnetic tubler towel rail D type 60 cm long between flange including one pair of fixing brackets complete all as specified and directed Make : Jaquar / MARC / Hindware complete all as specified and directed.

S&F in repair Stainless Steel non Megnetic towel ring Make : Jaquar / MARC / Hindware complete all as specified and approved by Engineer-in-charge.

S & F in repair stainless steel sensor operated optimum Hand dryers , material AISI 304 stainless steel , Stain finish complete all as specified and directed Make Jaquar Model No HDR- SAP - M99ACS and equivalent in Marc and Hindware

S&F as in repair 20mm dia decorative type drapery rod with decorative ends ISI Marked as approved by AGE(I) complete all as specified and directed

S&F as in repair MS clamps for holding of 20 mm dia drapery rods including necessary drilling, fixing with screw, plugs etc complete all as specified and directed

M&L for Preparation of old wooden surfaces of any description over 10 cm width or girth & applying two coats of synthetic enamel paint Ist quality after removal of existing treatment from old surface with help of thiner or other removing chemical materilas complete all as specified and directed.

M&L preparation new or previously untreated steel surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint (Ist quality) over and including one coat of red oxide zinc chrome primer complete all as specified and as directed .

Demolition of stone slabs and tiles of any descriptions or thickness in floors , aprons etc laid bedded and pointed in any mortor complete all as specified and directed.

M&L for 75 mm thick PCC 1:4:8 type D-2 using 40mm graded stone aggregate as in sub-base, under floors and pavings complete all as specified and directed.

M&L rubber moulded factory made machine pressed precast concrete interlocking paver block any shape and size of 80mm thickness , M-40 grade (ISI Marked ), set, in floors with grey cement & pigments including and over 25 mm thick sand cushioning for laying of inter locking tiles (paving blocks) complete all as specified and directed (Note : Design/shade of rubber moulded machine pressed precast concrete tiles as approved by AGE(I)

M&L for Providing cement concrete 1:3:6 type C-1 1:3:6 (using 20 mm graded stone aggregate) as in roof kerbs, Roof Chajjas or mud stops; rounded or chamfered on edges. complete all as specified and directed.

S & F in repairs 12 mm Toughned glass for gates with necessary fittings and fixtures ISI Marked as approved by AGE(I) complete all as specified and directed.

M & L in repair for Auditorium Carpet for floor and vertical surfaces of Auditorium of specification Syle Symphony , Construction - Loop Pile Graphic , Yarn type 100 % BCF Olefin , Dye Method - Solution Dyed , Gauge 1/10 , pile height 4 mm , Pile weight 675 gm /Sqm , primrary Backing - Woven Polypropylene , Secondary Backing - Action Back , Static Control - Permanent , Standard roll width of 4 Metre , Flammmability should passes Pill test of Make Donaire Model No SY 03 Red - Brown and approved By GE complete all as specified and directed.

S & F Armstrong channelled wood works perforated panels of width 192 mm, thickness 15 mm and length 2400 mm made of high density fibre board substrate with a laminated facing as per approved shade / species & finish and a melamine balancing layer on the reverse side. The boards shall have a special perforation pattern where the visible surface has a Helmholtz flutted perforation pattern of 3 mm width and 5 mm of visible panel each. The panels shall provide a minimum sag resistance of RH 90 and fire rating class 1 as per part 7 of BS 476. The edges of panel shall be "tongue and grooved" to recieve special clips for installation. The back of perforated panel shall have sound absorbing non woven acoustic fleece. The panels shall be mounted on special splines using clips provided by Armstrong or equivalent , complete all as specified and directed . (Make : Armstrong , NITT0B0 , Amutone or equivalent).

S & F Armstrong ' Optra Acoustical Wall Paneling' with square edges made of fibre glass substrate 25 mm thick and wrapped on the front side with an acoustically transparent and classified for fire reaction class A as per ASTM E - 84 , fabric with an option of colours as per the choice of Engr-in-charge / Garrison Engineer of size 600 x 1200 mm providing a minimum sound absorption level of 0.85 NRC to be affixed to wall using wall panel impalers supplied by M/S Armstrong Industries pvt Ltd and construction adhesives as the instructions laid down by the manufacturer. Armstrong wall panel impalers shall be fixed to the wall surface using self tapping screws. Silca based construction adhesive to be dabbed on the projecting elements (spikes ) of the impalers. Armstrong Optra wall panels shall be pierced through the spikes of the implares ensuring the line and level of the panels are maintained complete all as specified and directed.

Taking down existing push back chairs and removing grom site complete all as specified and directed.

Taking down carefully copper/aluminum point wiring (light/fan/socket power) complete , including fixture and fitting such as switches, ceilling roses, pendants, regulators, sockets, light fittings etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per condition seperately) and making good disturbed surfaces of walls, floors, etc. all as specified and directed.

Material & Labour for Point Wiring for one light Point/one fan point/ one call bell point, controlled by one switch with 1100 volts grade single core conforming to (IS:694 /1990) PVC insulated unsheathed 1.5 sqmm multi stranded copper conductor cable (FRLSH) with continuous earth wire of 1.5 Sqmm stranded copper conductor cable (FRLSH) PVC insulated unsheathed , drawn in and including concealed rigid PVC conduit(ISI marked) ,duly concealed to wall/floor or above false ceiling with fittings(ISI marked) not less than 20 mm dia (Color coding of wires shall be Phase, neutral and earth wire all as specified ) including metal flush box made of GI sheet and white cover complete all as specified and directed for the following. Note: Flush box and cover plate should be of same make all as approved for switches/sockets.

(a) One light point or bell point controlled by one modular switch

(b) One fan point controlled by one modular switch

(c) One 5 pin switch socket outlet 5A on independent modular board

(d) One 5 Pin socket outlet on same modular box and operated by separate switch

All as per item No 105 here-in-before but wiring with 2.5 sqmm single core multi stranded copper conductor 1100 V grade PVC insulated FRLSH but unsheathed single core for 16 Amps power point on independent board and 2.5 sqmm FRLSH cable as earthwire. Note: Flush box and cover plate should be of same make all as approved for switches/sockets

All as per item No 105 but wiring with 4.0 sqmm copper conductor for phase and neutral & 4 Sqmm copper conductor as earth continuity for one 15 Amps socket outlet on independent board. complete all as specified and directed.

S & F switch Modular single pole, one way 6 Amps , 1 module, 230 volts, 50 hz all as specified and directed by Engr-in-Charge.Make: Legrand cat No: 6734 01/ Indoasian Cat No: 800000 or equivalent make of L&T/Havells

M&L ceiling rose 3 terminal / PVC/ polycarbonate, isolated body all as speccified and directed Make : Anchor/ Cona / Havells

Supply and fix Modular Socket outlet, 6A - 3 pin combined, 2 module ISI marked, 230 volts, 50 hz all as specified and directed by Engr-in-Charge.Make: Legrand cat No: 6734 52 / Indoasian cat no: 800020 or equivalent make of L&T/Havells

Supply and fix Modular Socket outlet, 6/16A - 3 pin combined, 2 module ISI marked, 230 volts, 50 hz all as specified and directed by Engr-in-Charge. Make: Legrand cat No: 6734 55/ Indoasian cat No 800022 or equivalent make of L&T/Havells

Supply and fix Modular switch 1 way 16 Amps, 1 module, 230 volts, 50 hz white/ivory finish all as specified and directed by Engr-in-Charge. Make: Legrand cat No: 6734 11/ Indoasian Cat No: 800002 or equivalent make of L&T /Havells

M&L for Submain wiring with two runs of PVC insulated unsheathed cable FRLSH stranded copper conductor of size 10 sqmm conforming to (IS:694 /1990) with single run of PVC insulated-unsheathed copper conductor cable FRLSH of 6.0 sqmm stranded for earth continuity drawn in and including rigid stove enamelled steel medium grade conduit (ISI Marked) duly cocealed to wall/flooror above false celing with fitting (ISI) marked not less than 20 mm dia ( color coding of wires shall be phase, neutral and earth wire all as specified (Note : 1. Two runs of 10 sqmm, one run of 6 sqmm PVC insulated cable and one run of steel conduit will be measured as one unit

All as per Item No- 117 above but wiring with two runs of 6.0 Sqmm wire and one run of 6.0 sqmm wire as earth continuity conductor Note: Three run of 6 sqmm cable shall be measured as one unit

M&L for wiring of multiple light points controlled by one switch with 1100 volts grade single core conforming to (IS:694 /1990) PVC insulated unsheathed 1.5 sqmm multi stranded copper conductor cable (FRLSH) with continuous earth wire of 1.5 Sqmm stranded copper conductor cable (FRLSH) PVC insulated unsheathed , drawn in and including concealed rigid PVC conduit(ISI marked) ,duly concealed to wall/floor or above false ceiling with fittings(ISI marked) not less than 20 mm dia (Color coding of wires shall be Phase, neutral and earth wire all as specified ) Note: Three run of 1.5 sqmm cable and one run of PVC conduit shall be measured as one unit.

M&L recessed floor LED light fitting of 04 watt size 180mm x 80mm housing made out of pressure dia cast aluminium alloy powder coated with clear glass IP54 protected working on 180-240 volt AC 50Hz alongwith appropriate driver PF> 0.98 having surge protection level > 2KVA, thermal short circuit protection THD<20% made up of long life LED chips (SMD) in modular with Ra>70 and LED lumen efficiency >130 Lumen/watt including fixing on floor and making necessary electrical connection all as specified by manufacture and as directed at site by Engineer-in-charge. Note : The firm has to give warranty for flood light fittings including driver minimum for 01 years for any defects developed during the period

M&L for single sided exit Signage Board of size 12” x 8” made with acrylic sheet illuminated with 15Watt LED lamp working on 180-240 Volt AC 50 Hz including fixing on wall and making necessary electrical connection all as specified by manufacture and directed at site by Engineer -in-Charge. Note : The firm has to give warranty for flood light fittings including driver minimum for 02 years for any defects developed during the period

Supply and fix LED recessed Indoor Step / Foot Light03/04 Watt with housing Made out of pressure die-cast aluminium alloy with Clear glass, IP-20 protection, working on (180-240 )Volts AC, 50 HZ wired with appropriate Driver PF>0.98 having , surge protection level >5 KV, thermal short circuit Protection THD <30% made up of long life LED chips (SMD) in modular with Ra>70, and LED lumen efficiency >140 lumen per watt, CCT of 3000K, suitable for mounting on wall, MAKE : Shakti Car Part No : SZWSIMX004/ Bajaj – BLSGV4WWHLED /equivalent Model in Havells/Wipro (i) the firm has to give warranty for Step foot light fittings including driver minimum for 02 years for any defects developed during the period

Supply and fix LED commercial Recess round down Light fitting 6W, housing Made out of pressure die cast aluminium, polymer opaque diffuser, IP-20 protection, environment friendly, new generation aesthetically modern design with high bright LEDs, working on (180-240 )Volts AC,50 HZ wired with appropriate Driver PF>0.98, surge protection level >2 KV, THD <20% made up of long life LED chips(SMD) in modular with Ra>70, and LED lumen efficiency>140, Luminous efficiency >90 lumens/watt, CCT should be between 5700” K- 6500” K, should be suitable for mounting on ceiling of 125mm dia. MAKE : Shakti Car Part No : SZRDRMX006 or equivalent Model in Havells/Wipro note (i) the firm has to give warranty for light fittings including driver minimum for 02 years for any defects developed during the period

Supply and fix LED commercial Recess round down Light fitting 12W, housing Made out of pressure die cast aluminium, polymer opaque diffuser, IP-20 protection, environment friendly, new generation aesthetically modern design with high bright LEDs, working on (180-240 )Volts AC,50 HZ wired with appropriate Driver PF>0.98, surge protection level >2 KV, THD <20% made up of long life LED chips(SMD) in modular with Ra>70, and LED lumen efficiency>140, Luminous efficiency >90 lumens/watt, CCT should be between 5700” K- 6500” K, should be suitable for mounting on ceiling of 125mm dia. MAKE : Shakti Car Part No : SZRDRMX0012 or equivalent Model in Havells/Wipro (i) the firm has to give warranty for light fittings including driver minimum for 02 years for any defects developed during the period

S&F 34 Watt,3400lumens LED Panel 2X2 environmental friendly,fully diffuser using engineering grade polycarbonate diffuser, new generation, aesthetically designed, CRCA housing , ultra modern surface mounting luminaire with high brightness SMD LEDs as light source, suitable for armstrong/Grid ceilingVoltage range -120v-280V AC system efficacy - 110 Lumen/Watts power factor>0.98 tha<15%,CCT6500k,2 Yrs warranty complete with separate electronic driver ceilling light 34 W including connecting up with twin core twisted flexible copper conductor cable with suitable size of 230V , 50 HZ all as specifified & directed. Make:SZSZRMX034 of Shakti /equivalant inHavells//Wipro. note (i) the firm has to give warranty for light fittings including driver minimum for 02 years for any defects developed during the period

S&F LED tube light batten 20 watts 4 fts polycarbonate housing, translucent diffuser with LED light source , 2200 lumen, natural white ,surge protection range- 2KV, voltage protection range 120-280 VAC , 2 years warranty ,system efficacy not less than 110 Lm/watt for the fitting , power factor>0.95 total harmonic distortation<20% , colour rendering index >80, coefficient colour temp 6500 K, fixed on site with all accessories all as specified and directed. Make Shakti cat part No SZSLBMX020 or equivalent in Havells , wipro or bajaj LM79 and LM80 reports to be produced . BIS certification must .

S&F new LED flood light fitting 50 W housing made out of pressure die-cast aluminium alloy with toughned glass, IP-66 protection, working on 240 Volts , 50 HZ, consisting of reflective lens wired with appropriate driver PF>0.98 having over voltage protection upto 440 volts, Surge protection level ≥ 10 KV, thermal short circuit protection THD < 10% made up of long life LED chips (SMD) in modular with Ra>70, and LED lumen efficiency >140 lumen per watt, beam angle along the drive way, 120 degree, beam angle across the drive way, 80 degree luminior efficiancy > 110 Lumens/watt power LED should be of more than 01 watt CCT should be between 5700° K- 6500° K including fixed on ground with 02 Nos MS clamp made out of F1 40 x 6 mm or as directed including connecting with 1.5 sq mm, 3 core, PVC insulated Copper conductor cable 1100 Volts grade from distribution box to light complete all as specified and as directed by Engr-in-Charge (i) the firm has to give warranty for street light fittings including driver minimum for 03 years for any defects developed during the period. (ii) The contractor shall submit the third party LM 79 report from any NABL approved laboratory. (iii) The fitting should have BIS, CRSno Make:-Havells Cat No-JETACOMPECTOFL50WLED757LTG or equivalent make in Wipro/Shakti

S&F Straight Linear 9W LED Tube light fitiing Polycarbonate body for mirror light 2 ft long with LED light source with uniform light output 990 lumens,surge protection rang-2KV Voltage -120-280 V AC,2 Yrs warranty, System efficacy not less than 110 lumen/watt power factor>0.95,THD<20%, CRI.80 CCT 5500K,fixed on site with all accessories all as specified & directed Make ; cat No SZSLBMX009 of Shakti / Havells / Wipro.

S&F MCCB 4 pole, 63 A, 25 KA, 415 Volts suitable for fixing in Vertical TPN DB.complete all as specified and directed.

Supply & fixing MCB, SPN, AC, 240 volts of( 6-32) Amps capacity, 10KA, 'B' series for controlling individual row and making connections with suitable size of copper lugs complete all as specified & directed.

Taking down old servicable/un servicable CFL downlight and mirror CFL light fitting watts with all accessories complete all as specified & directed.

Taking down old servicable/un servicable tube lights/mirror fitting 18/36/40 watts with all accessories complete all as specified & directed.

S&F 34 Watt,3400lumens LED Panel 2X2 environmental friendly,fully diffuser using engineering grade polycarbonate diffuser, new generation, aesthetically designed, CRCA housing , ultra modern recess mounting luminaire with high brightness SMD LEDs as light source, suitable for armstrong/Grid ceilingVoltage range -120v-280V AC system efficacy - 110 Lumen/Watts power factor>0.98 tha<15%,CCT6500k,2 Yrs warranty complete with separate electronic driver ceilling light 34 W including connecting up with twin core twisted flexible copper conductor cable with suitable size of 230V , 50 HZ all as specifified & directed. Make: cat No SZSZRMX034 of Shakti/Havells/ /Wipro. note (i) the firm has to give warranty for light fittings including driver minimum for 02 years for any defects developed during the period

Supply & fixing MCB , SP, AC, 240 volts of 06 to 32 Amps capacity 10KA, 'B' series and making connections with suitable size of copper lugs complete all as specified & directed.

S&F MCB DB SPN 2 way, 240 volts without busbar in sheet steel enclosure, single door type complete all as specified and directed..

S&F MCB DB SPN 8 way, 240 Volts with 200 amps rated copper busbar in sheet steel enclosure, double door type. complete all as specified and directed.

S&F MCB DB SPN 12 way, 240 Volts with 200 amps rated copper busbar in sheet steel enclosure, double door type . complete all as specified and directed.

S&F vertical TPN DB with MCCB as incomer 4 way TPN with 200 amps rated bus bar, double door, 415 Volts, IP43 metal door complete including taking down unserviceable one complete all as specified and as directed. Note :- MCCB 63 A 4P will be measured and paid for seprerately. complete all as specified and directed.

Material & labour for earthing complete with galvanised steel earth plate electrode 600x600x6mm thick burried directly in ground. ( earth pit not less than 2.25mtr depth below ground level at any type of strata ) with top edge of the earth plate not less than 1.5mtr below normal ground level connected by 4 mm GI wire as earth lead by means of brass nuts and bolts, thimblee check nuts, washer including concrete chamber of PCC 1:3:6 type C-1 using 20 mm graded stone aggregates with fair finish, internal surface of concrete chamber shall be given internal dia 300mmX 300 mm , 15 mm thick plaster in cement mortar 1:4 , funnel with wire mesh , RCC pit cover 320X320x80 mm size RCC (1:2:4) mix type B1 using 20 mm graded stone aggregates reinforced with xPM and charcoal, dust and common salt all as shown in electrical plate No. 03 of MES SSR part-I(2009) and specified including and provn of GI wire upto 7.50 mtrs long with 15 mm dia light grade GI pipe protection and watering pipe of GI 20 mm bore , medium grade, complete including all necessary excavation & earth work and connecting the earth strip to pnel, including testing on completion. complete all as specified and directed. . Note:- RCC pit cover shall be of precast of PCC(1:2:4) type B-1, 80 mm thick reinforced with XPM weighting not less than 4 kg per sqm in lieu of CI cover (ii) cost of additional GI wire more than 7.5 Mtr will be measured and paid seperately under relevent items .

Material and labour for design ,supply, fabrication, Installation, testing and commissoning Factory made LT Panel outdoor type totally enclosed, dust and vermin proof, suitably ventilated, floor mounted, 415 volts, 3 phase and neutral, 50 Hz AC supply system, fully compartmentalized, both side openable, made out of 3.00 mm thick CRCA sheet, protection of enclousure IP-54 as per IS: 2147 of 1962 with pre-treatment and powder coated of approved colour including suitable frame work/support made out of suitable size angle iron/flat iron, front opening type with provision for cable entry, with proper ferrule and cable glands, internal wiring with PVC insulated multi stranded copper conductor FRLS cable of adequate size(minimum 1.5 sqmm), including required civil works/anchoring bolts for fixing, PCC foundation etc with and including following all as specified and directed ( Then job includes taking up or down existing panel board complete) (a) Electrically grade shroded Aluminium bus bar of capacity 250 Amps for 3 phase and neutral and current density not more than 8Amp/sqmm,including interconnection of all switchgears fixed on DMC insulators and provision of extension.

Outgoing) (a) MCCB 100Amps, 415 V,4 pole 50Hz, 25 KA with adjustbale thermal magnetic release,in built instantaneous protection ICs=100% Icu (1 sec) complete all as specified and directed -02 Nos (b) MCCB 50Amps, 415 V,4 pole 50Hz, 25 KA with adjustbale thermal magnetic release,in built instantaneous protection ICs=100% Icu (1 sec) complete all as specified and directed -02 Nos (c) MCB 02 Pole, 16 Amps 10KA -02 Nos (d)Digital timer switch, suitable for single phase 240 Volts AC supply for street light feeder programmable 1 mm with backup of 6 years, 28 memory location weekly program with one changeoverr total 28 programs DIN type, daily/weekly-02 Nos (e) Contactor for timer switch 12 A-02 Nos Makes:- (a) Ammeter/Voltmeter: Siemens/Schneider/L&T (b) LED indicator/Push button/ASS/VAA etc: L&T/Schneider/Siemens (c) LT panels: ABB//Schneider/Universal Switchgear control/ Tenco systems and switch gears pvt ltd Indore. (d) ACB/MCCB/MCB/ATS: L&T/ABB/Schneider/Siemens

Notes for Item No 1 :- 1. Panel manufacturers should have in house powder coating plant with minimum 8 tansk pretreatment of MS sheet facilities, dust free spray paint booth.(8 tanks pretreatment process includes: degreasing/water rinsing/de-dusting/water rinsing/activation/phosphating water rinsing/passivation). 2. Thickness of powder coating shall not be less than 80 microns and test certificate for powder coating shall be furnished along with LT panel 3. The panel manufacturer should have following certification: (i) CPRI certification degree of protection IP-54 ( should have IEC:61439-1-2 & IEC:60529 tests) (ii) CPRI certification shrot circuit with stand strength should be 50 KA RMS for 1 sec with initial peak of 105 KA (iii) CPRI certification rated current for short circuit not less than 5000A 4. All the electricals switch gear like MCCBs, MCB should be of same make 5. Dwawing of panel board should be got approved from GE before fabrication. 6. Panel board should be fully compartmentalized in accordance to form 4 b of IEC 61439-1-2.

Disconnecting and dismantling old U/S bldg security light and Supply and fix new LED bldg light fitting 20 W housing made out of pressure die-cast aluminium alloy with toughned glass, IP-66 protection, working on 240 Volts , 50 HZ, consisting of reflective lens wired with appropriate driver PF>0.98 having over voltage protection upto 440 volts, Surge protection level ≥ 10 KV, thermal short circuit protection THD < 10% made up of long life LED chips (SMD) in modular with Ra>70, and LED lumen efficiency >140 lumen per watt, beam angle along the drive way, 120 degree, beam angle across the drive way, 80 degree luminior efficiancy > 110 Lumens/watt power LED should be of more than 01 watt CCT should be between 5700° K- 6500° K including fixed on wall with 02 Nos MS clamp made out of F1 40 x 6 mm and bracket made out of 40 mm dia light grade GI pipe not less than 1.2 mtr long bend to shape including connecting with 1.5 sq mm, 3 core, PVC insulated Copper conductor cable 1100 Volts grade complete all as specified and as directed by Engr-in-Charge (i) the firm has to give warranty for street light fittings including driver minimum for 03 years for any defects developed during the period. (ii) The contractor shall submit the third party LM 79 report from any NABL approved laboratory. (iii) The fitting should have BIS, CRSno . Make:-Havells Cat No-ENDURAPEARLSL25WLED757SASYTOPCMP or equivalent make in/Wipro/Shakti

Disconnecting and dismantling old U/S flood light and Supply and fix new LED flood light fitting 30 W housing made out of pressure die-cast aluminium alloy with toughned glass, IP-66 protection, working on 240 Volts , 50 HZ, consisting of reflective lens wired with appropriate driver PF>0.98 having over voltage protection upto 440 volts, Surge protection level ≥ 10 KV, thermal short circuit protection THD < 10% made up of long life LED chips (SMD) in modular with Ra>70, and LED lumen efficiency >140 lumen per watt, beam angle along the drive way, 120 degree, beam angle across the drive way, 80 degree luminior efficiancy > 110 Lumens/watt power LED should be of more than 01 watt CCT should be between 5700° K- 6500° K including fixed on ground with 02 Nos MS clamp made out of F1 40 x 6 mm or as directed including connecting with 1.5 sq mm, 3 core, PVC insulated Copper conductor cable 1100 Volts grade from distribution box to light complete all as specified and as directed by Engr-in-Charge (i) the firm has to give warranty for street light fittings including driver minimum for 03 years for any defects developed during the period. (ii) The contractor shall submit the third party LM 79 report from any NABL approved laboratory. (iii) The fitting should have BIS, CRSno Make:-Havells Cat No-JETAQUANTOPLUSFLP30WLED757SYM or equivalent make in Wipro/Shakti

Disconnecting and dismantling old U/S flood light and Disconnecting and dismantling old U/S flood light and Supply and fix new LED flood light fitting 120 W housing made out of pressure die-cast aluminium alloy with toughned glass, IP-66 protection, working on 240 Volts , 50 HZ, consisting of reflective lens wired with appropriate driver PF>0.98 having over voltage protection upto 440 volts, Surge protection level ≥ 10 KV, thermal short circuit protection THD < 10% made up of long life LED chips (SMD) in modular with Ra>70, and LED lumen efficiency >140 lumen per watt, beam angle along the drive way, 120 degree, beam angle across the drive way, 80 degree luminior efficiancy > 110 Lumens/watt power LED should be of more than 01 watt CCT should be between 5700° K- 6500° K including fixed on ground/wall with 02 Nos MS clamp made out of F1 40 x 6 mm or as directed including connecting with 1.5 sq mm, 3 core, PVC insulated Copper conductor cable 1100 Volts grade from distribution box to light complete all as specified and as directed by Engr-in-Charge (i) the firm has to give warranty for street light fittings including driver minimum for 03 years for any defects developed during the period. (ii) The contractor shall submit the third party LM 79 report from any NABL approved laboratory. (iii) The fitting should have BIS, CRSno Make:-Havells Cat No-JETAIRISFLS120WLED757APWBLTG or equivalent make in Wipro/Shakti

Disconnecting and dismantling old U/S Post-top/street light and Supply, fix and testing new generation, post-top lantern LED 35W/40W, energy saving, environmental friendly, long life aesthetically designed with good indirect symmetrical light distribution, die-cast aluminium landscapeIP65 luminaire with high power COB led as light source including 3.5 mtr pole aesthetically designed decorative hot dipped galvanised mild steel step pole with grey powder finish/PU finish comp post top range plasma cut & duly chamfered opening window of 300x110 mm including in and out terminal connections for UG cable & mounting accessories, window cover is fitted with allen screws to the pole, including earth work, duly prewired complete all as specified and directed. Make of Post top Lantern:-Havells Cat Part No. ENDURASPRING6PT35WLED 740PSYMTOTG/ Twinkle lite505 (PT-40)/ for carter pole 407535, or equivalent make in Wipro . Note :- (i) Warranty of pole shall be given for 05 years(min) and for light fitting it should be for 02 years(min) (ii) The rates quoted are deemed tobe included the cost for fixing arrangement(like PCC,, earth work and other connected items) all as specified by manufacturer

Disconnecting and dismantling old U/S light and Supply, fix and testing spike light LED 6Watt incl spike with die cast aluminum housing designed for rugged outdoor usage IP 65 protection in a landscape environment including earth work, PCC if required, duly prewired complete all as specified and directed. Make:-Bajaj Cat No-BGSBL 6W LED WW / Twinkle lite cat part no. TL-LL-1607-6 Watt or equivalent make in Wipro/Shakti

All as per item No. 148 above but spike light LED 9Watt incl spike with die cast aluminum housing designed for rugged outdoor usage IP 65 protection in a landscape environment including earth work, PCC if required, duly prewired complete all as specified and directed. Make:-Bajaj Cat No-BGSBL 9W LED WW / Twinkle lite cat part no. TL-LL-1607-9 Watt or equivalent make in /Wipro/Shakti

Material & labour for earthing complete with galvanised steel earth plate electrode 600x600x6mm thick burried directly in ground. ( earth pit not less than 2.25 mtr depth below ground level at any type of strata ) with top edge of the earth plate not less than 1.5mtr below normal ground level connected by 25X 4 mm GI wire as earth lead by means of brass nuts and bolt,thimbles check nuts, washers including concrete chamber of PCC 1:3:6 type C-1 using 20mm graded stone aggregate with fair finish, internal surface of concrete chamber shall be given internal dia 300mm x300mm, 15mm thick plaster in CM 1:4 funnel with wire mesh, RCC pit cover of 320x320x80mm size (1:2:4) Type B1 using 20mm graded stone aggregate rainforced with XPM and charcoal, dust and common salt all as shown in electrical plate No 3 of MES SSR Part-1(2009) and specified including and provision of GI wire upto 7.5 mtrs long with 15 mm dia light grade Gi pipe protection and watering pipe of GI 20 mm bore, medium grade, including all excavation and earth work and connecting the earthing strip to panel, including testing on completion complete all as specified and directed by Engr-in-charge. Note:- (i) RCC pit cover shall be precast of RCC(1:2:4) type B1, 80mm thick rainforced with XPM weighting not less than 4kg/sqm in lieu of CI cover.(ii) Cost of additional GI wire more than 7.5 mtrs will be measured and paid seperately under relevant items

Supplying, laying, commisioning and testing of 1.1 KV grade XLPE insulated PVC sheathed steel armoured aluminum stranded conductor LT UG cable ( Conforming to IS 7098) ISI marked in trenches / ducts / through GI pipes under roads of size 95 sqmm 3.5 core complete all as specifed and directed. Note;- The earth work, GI pipe shall be measured and paid sepretely under appropriate item of Sch A

Supplying, laying, commisioning and testing of 1.1 KV grade XLPE insulated PVC sheathed steel armoured aluminum stranded conductor LT UG cable ( Conforming to IS 7098) ISI marked in trenches / ducts / through GI pipes under roads of size 50 sqmm 3.5 core complete all as specifed and directed. Note;- The earth work, GI pipe shall be measured and paid sepretely under appropriate item of Sch A

Supplying, laying, commisioning and testing of 1.1 KV grade XLPE insulated PVC sheathed steel armoured aluminum stranded conductor LT UG cable ( Conforming to IS 7098) ISI marked in trenches / ducts / through GI pipes under roads of size 25 sqmm 4 core complete all as specifed and directed. Note;- The earth work, GI pipe shall be measured and paid sepretely under appropriate item of Sch A

Supplying, laying, commisioning and testing of 1.1 KV grade XLPE insulated PVC sheathed steel armoured aluminum stranded conductor LT UG cable ( Conforming to IS 7098) ISI marked in trenches / ducts / through GI pipes under roads of size 10 sqmm 2 core complete all as specifed and directed. Note;- The earth work, GI pipe shall be measured and paid sepretely under appropriate item of Sch A

Excavation in trenches in soft/disintegrated soil not exc 1.5 m wide and not exceeding 1.5m in depth for laying UG cable/foundation etc complete all as specified and directed.

Returning filling in soft/disintegrated soil including spreading levelling watering and well ramming in layers n.exc 25cm each layer complete all as specified and directed.

Removal of excavated surplus soft/disintegrated soil to a distance not exc 50 mtr and depositing where directed at a level not exc 1.5 mtr above the starting point complete all as specified and directed.

Material and Labour for sand cushioning, with dry and clean fine river sand for underground cable 8 cm before laying cable and 15 cm after laying and punned to 18 cm after laying of cable complete all as specified and directed. (Note:- Punned thickness shall be considered for payment purpose.)

Supply and laying well burnt clay brick old size class 'B' laid dry flat for protection over the cable, width equal to the length of brick complete all as specified and directed.

Disconnecting and taking out old unserviceable GI pipe and Supplying, laying & jointing GI water tubing, 32 mm bore, light grade as in sleeving etc laid in trenches / pole post /under culvert/ under road for cable protection etc. complete all as specified and directed .

Disconnecting and taking out old unserviceable GI pipe and Supplying, laying & jointing GI water tubing, 50 mm bore, light grade as in sleeving etc laid in trenches / pole post /under culvert/ under road etc. complete all as specified and directed .

Taking out old U/S GI pipe from trenches/ wall/culvert/under road of any size all as specified and directed

Taking out old U/S cable from trenches of any size(from 10Sqmm to 95 sqmm) and depositing to MES store yard

M&L for preparation of old treated surface of existing steel tubular poles 8/9/11 mtr long incl painting two coats of aluminium paint over one coat of red oxode primer including 3 nos band/strips with yellow and black colour (300 mm wide each) in alternate layers synthetic enamel paint at a distance 250 mm from plinth block, marking pole nos with black synthetic enamel paint complete all as specified and directed.

Disconnecting the unserviceable box and S & F Loop in and Loop out Box made out of ploycarbonate front operable hinged from side of size 200x140x95 mm having 2 pole cable connector terminals (for cable in out function) fixed inside box with insulator support and 01 nos MCB SP 06 Amp fixed inside box complete for light fitting including fixing the box to pole or grout in ground with MS clamps 40x5 mm GI nuts, bolts and washers complete all as specified and directed. Make of Box:- Sintax/Hensel/EPP/Havells Make of MCB:- Havells/L&T/Schiender

M/S Manmohan Singh Anand

PIONEER REFRIGERATION AND ELECTRICALS