Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Tender Value
₹16.5 Cr
EMD Value
₹16.5 L
Closing Date
23 Feb 2023, 11:00 amClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
NBCC Bhawan
NBCC Bhawan
Construction of Critical Care Block (CCB) at DHH under National Health Mission in the Sonepur district of Odisha (Scope of work in addition to above is uploaded separately along with this NIT)
NBCC/ODISHA/ZO/NHM/NIT/22-23/33~EW83b949efb67965ea21900bc4
NBCC/ODISHA/ZO/NHM/NIT/22-23/33
Open Tender-Domestic
Civil Works General
NBCC Bhawan
₹11,800
₹16.5 L
23 Feb 2023
8 Feb 2023
23 Feb 2023
8 Feb 2023
23 Feb 2023
Head Description of Item Unit Qnty. Rate Amount
Earthwork in excavation in hard soil for site
leveling, foundation, pits, trenches and other
civil works upto and including 1.5metre lift
and stacking the soil upto a lead of 100 metre
2 1 and including dewatering, removing slush, 0 0.00 0.00 0.00
shoring and strutting (as required), complete
as per specification and as directed by the
Engineer-In-Charge.
Supplying of filling sand in foundation and
plinth including watering,ramming,
4 3 consolidating and dressing, labours, tools, Cum 2069.99 339.13 7,01,999.85
taxes etc., all complete as per the
specification and direction of E.I.C.
Diluting and injecting chemical emulsion for
PRE CONSTRUCTIONAL Anti-termite
treatment and creating a continuous chemical
barrier under and all-round the column pits,
wall trenches, basement excavation, top
perimeter of building, expansion joints, over
5 4 the top surface of consolidated earth on Sqm 963.00 162.84 1,56,814.92
which apron is to be laid, surroundings of
pipes and conduits etc. complete as per
specifications (plinth area of the building at
ground floor only shall be measured for
Providing and laying plain cement concrete
1:4:8 (1 cement : 4 sand : 8 stone agregate
40mm nominal size) as levelling course in
floor and plinth including tempering, curring,
shuttering etc. complete all depth and height.
Fly Ash. brick masonry of size 25 cm. x 12
cm. x 8 cm. having crushing strength not less
than 75 kg. Per Sqr. Cm. in cement mortar of
mix (1:6) with approved grade cement and
screened & washed sand for mortar after
immersing the bricks for 6 (Six) hours in
water before use in foundation & plinth
including splays cutting, circular moulding,
7 6 corbelling, chamfering and similar such type Cum 35.96 6061.19 2,17,960.32
of works, watering and curing etc. including
cost, conveyance, loading, unloading,
royalties and taxes of all materials, cost of all
labour, scaffolding, sundries, T&P required
for the works etc. complete in all respect as
directed by the Engineer-in-charge
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2023.02.08
Head Description of Item Unit Qnty. Rate Amount
Fly Ash. brick masonry of size 25 cm. x 12
cm. x 8 cm. having crushing strength not less
than 75 kg. Per Sqr. Cm. in cement mortar of
mix (1:6) with approved grade cement and
screened & washed sand for mortar after
immersing the bricks for 6 (Six) hours in
water before use in Superstructure including
splays cutting, circular moulding, corbelling,
8 7 chamfering and similar such type of works, 0 0.00 0.00 0.00
watering and curing etc. including cost,
conveyance, loading, unloading, royalties and
taxes of all materials, cost of all labour,
scaffolding, sundries, T&P required for the
works etc. complete in all respect as directed
by the Engineer-in-charge
Frame work: consist of 12mm thick particle
board panel with fabric Estrutions: aluminum
in oven baked powder coat finishBase cover
size: 0.8mm thick aluminum plate powder
coated finish zero-rush, mould produced
15 14 frame for consistent shape and size Capping: 0 0.00 0.00 0.00
Aluminum in powder –coat finish Panel: tile
partition composed of FABRIC, Adjustable
footing etc complete with all necessary
arrangements and as directed by EIC.
RCC work M-25 grade as per approved
designs and drawings having a minimum
compressive strength (in work test) 25 N. /
Square mm. in 15 cm. cubes at 28 days after
mixing and test conducted in accordance with
I.S. 456 and I.S. 516 using 12 mm. to 20
mm. size black hard crusher broken granite
stone chips and screened and washed sharp
sand for mortar of approved quality from
approved quarry, washed and cleaned (20
mm. size chips not to exceed 25 % ) to be
mixed in concrete mixture with approved
grade cement including hoisting, lowering,
laying and compacting concrete by using
19 18 vibrators, watering and curing for 28 days, 0 0.00 0.00 0.00
centring and shuttering and finishing the
exposed surface smooth providing grooves or
beads wherever necessary including cost,
conveyance, loading, unloading, royalties and
taxes of all materials and cost of all labours,
sundries, T&P, required for the work etc.
complete in all respect but excluding cost and
conveyance of M.S. rods or Tor steel and
binding wires and labour charges for
straightening, cutting, bending etc. of M.S.
rods or Tor steel tying the grills and placing in
proper position as per direction of the
Engineer in charge
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2023.02.08
Head Description of Item Unit Qnty. Rate Amount
24 23 Column up to Roof Beam Lvl. :- Cum 65.74 14086.60 9,26,053.35
32 31 Column up to Roof Beam Lvl. :- Cum 56.23 15627.21 8,78,718.13
40 39 Column up to Roof Beam Lvl. :- Cum 67.32 17470.61 11,76,121.33
48 47 Column up to Roof Beam Lvl. :- Cum 53.06 19676.74 10,44,047.61
56 55 Column up to Roof Beam Lvl. :- Cum 53.06 22317.22 11,84,151.80
64 63 Column up to Roof Beam Lvl. :- Cum 8.51 25477.73 2,16,815.52
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2023.02.08
Head Description of Item Unit Qnty. Rate Amount
Cutting, straightening coiled or bent up M.S.
Rod or tor steel of make including bending,
binding, welding and joining if necessary and
tying the grills and placing in position as
required for R.C.C. Work and for providing
fan hooks as required, hoisting, lowering,
laying including cost, conveyances, taxes of
M.S. Rod or tor steel and binding wires of 18
to 20 gauge and labour required for the work
70 69 for bending, binding and tying the grills in all 0 0.00 0.00 0.00
floors (Linear measurement will be taken and
quantity will be calculated basing on the
standard weight of B.I.S. for M.S. Rods or tor
steel only. Wastage if any, including weight of
binding wire will not be considered for
measurement) etc. complete as per
specification & direction of Engineer-in-
Providing 12mm. Thick cement plaster in
cement mortar or mix(1:6) in all floors at all
height with cement & screened and washed
sharp river sand for mortar and finished
smooth to the rough surface of the brick
masonary walls after racking out the joints
77 76 (alongwith providing grooves wherever 0 0.00 0.00 0.00
necessary) including watering and
curing,rounding of corners etc. complete with
cost, conveyance, loading, unloading,
royalities and taxes of all materials,cost of all
labour,T&P, and scaffolding required for the
work etc. as directed by the Engineer-in-
Providing 16 mm thick cement plaster with
cement mortar of mix (1:6) with screened and
washed sharp sand for mortar and finished
smooth to the rough surface of walls in all
heights after racking out joints including
watering and curing, rounding of corners,
84 83 providing grooves where ever necessary with 0 0.00 0.00 0.00
cost, conveyance, royalties and taxes of all
materials with cost of all labour,labour cess,
T&P, and scaffolding required for the work
etc. complete in all respect as directed by the
Engineer in charge.
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2023.02.08
Head Description of Item Unit Qnty. Rate Amount
Providing 6 mm thick cement plaster with
cement mortar of mix (1:4) with screened and
washed sharp sand for mortar and finished
smooth to R.C.C. work after closed deep
chipping & slurry treatment including watering
and curing, rounding of corners, providing
91 90 grooves where ever necessary with cost, 0 0.00 0.00 0.00
conveyance, royalties and taxes of all
materials with cost of all labour, T&P, and
scaffolding required for the work etc.
complete in all respect as directed by the
Engineer in charge.
Supplying, fitting & fixing of 10 mm thick &
size of 600x600 mm Glazed Vitrified floor
tiles (GVT) of matt finish(WOODEN
FINISH/RUSTIC FINISH) with veilcraft (VC )
shield( Scratch free/stain free) with water
absorption limit between 0.08% to 3% and
conforming to IS : 15622:2006 (Group B Ib).
98 97 laid on 20 mm thick cement mortar (1:4) (1 0 0.00 0.00 0.00
cement : 4 course sand) and filling joints with
white cement of approved quality including
cost of all materials, labour T&P etc. required
for the work all complete as per direction of
the Engineer-in-charge.
Supplying, fitting & fixing of Vertified tiles
in dadoes, skirting and risers of steps laid on
12 mm thick cement mortar (1:3) (1 cement :
3 course sand) jointed with slurry mixed with
104 103 pigment to match the shades of the tiles etc. 0 0.00 0.00 0.00
complete including cost of all materials,
labour T&P etc. required for the work all
complete as per direction of the Engineer-in-
Supplying, fitting & fixing of Granite Tiles of
minimum Above 0.40 sqm. (20mm thick) of
approved make in floors laid on 20 mm thick
cement mortar (1:4) (1 cement : 4 course
110 109 sand) and filling joints with slurry including 0 0.00 0.00 0.00
cost of all materials, labour T&P etc. required
for the work all complete incl. rubbing as per
direction of the Engineer-in-charge.
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2023.02.08
Head Description of Item Unit Qnty. Rate Amount
Supplying, fitting & fixing of Granite Tiles of
minimum Above 0.1sqm up to 0.4
sqm(10mm. thick) of approved make in
dadoes laid on 12 mm thick cement mortar
(1:3) (1 cement : 3 course sand) and filling 0 0.00 0.00 0.00
joints with slurry including cost of all
materials, labour T&P etc. required for the
work all complete incl. rubbing as per
direction of the Engineer-in-charge.
Supplying, fitting and fixing of Antiskid
Ceramic Floor Tiles in flooring using special
plain / printed series Ceramic Floor Tile of
premium grade ( having minimum thickness 7
mm to 8 mm & size 300 mm x300 mm,
confirming to I.S 13755 of approved quality
and shade in floors, treads on steps and
landings on 20 m.m thick bed of cement
mortar of mix (1:4) laid in proper slope and
gradient with screened & washed sharp
river sand for mortar and fixing with neat
white cement slurry,grouting the joints with
122 121 neat white cement slurry mixed with required 0 0.00 0.00 0.00
quantities of pigments (Tiles are to be
immersed in the water for required time
before use) of approved make to match the
shades of the Ceramic Floor Tiles if required
including cost, conveyance, loading,
unloading, stacking, royalties , all taxes, cost
of all Labour, Labour cess ,Sundries, T&P
required for the work , Watering , Curing for
required days , cleaning the flooring space
manually etc. complete in all respect as
directed by the Engineer-in-charge.
Supplying, fitting & fixing of Germ free
Ceramic wall tiles of premium grade of size
200x300mm having thickness 6.5mm to
6.7mm confirming to IS 13753 in dadoes,
skirting and risers of steps laid on 12 mm
thick cement mortar (1:3) (1 cement : 3
course sand) jointed with slurry mixed with
128 127 pigment to match the shades of the tiles etc. 0 0.00 0.00 0.00
complete including cost of all materials,
labour T&P etc. required for the work all
complete as per direction of the Engineer-in-
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2023.02.08
Head Description of Item Unit Qnty. Rate Amount
Providing and fixing factory made single
extruded WPC (Wood Polymer Composite)
solid door/window/Ceosetory window s &
other Frames/Chowkhat including 2 coats of
Enamel paint and one coat of wood primer
fabricated with miter joints after applying PVC
solvent cement and screwed with full body
threaded star headed SS screws having
minimum frame density of 750 kg/cum, screw
withdrawal strength of 2200 N (Face) & 1100
134 133 N (Edge) , minimum compressive strength of 0 0.00 0.00 0.00
58 N/mm2, modulus of elast icity 900 N/mm2
and resistance to spread of flame of Class A
category with property of being termite/borer
proof, water/moisture proof and fire retardant
and fixed in position with m.s hold fast/ lugs/
SS dash fastner of required dia & length
complete as per the direction of engineer-in-
Factory made 30mm/32mm flush door
shutter (Laminates both side of frame) with all
labour, iron fittings, and wooden hinged cleats
etc fitted and fixed complete in all respect
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2023.02.08
Head Description of Item Unit Qnty. Rate Amount
Factory made FRP( Altematly called GRP)
door frame of size 75mm x 100mm
fabricated using E - glass chopped strand
mat (CSM) U.V stabilised inopathalic Gel coat
and impregnated with inopathalic resin The
thickness of the GRP skins shall not be less
then 2.0 mm . The door frame consists of
four segments which are provided with plug
in socket arrrangement in-situ-in mould. The
segments are plugged in and are joined
together by means of srew. The GRP frame
shall be provided with wooden reinforcement
on six locations for high srew holding capacity
for fixing metalic hold fast and shall be
consolidated by filling with medium density
146 145 foam / plaster of paris with fibre 0 0.00 0.00 0.00
reinforcement , six number of 260mm x
25mm x 5mm size 'S' shaped M.S flat hold
fast shall be provided with the frame. The
material and process for manufacturing the
finish of door frame shall conform to RV-
TIFAC composites Design centre's standards
and specifications . The finish of door frame
will be plain colour white /Ivory/Beige/Light
grey / Golden brown / Mahogany/ Teak wood
/sand stone Champagne/Pastel blue or any
other colour using high quality pigment
complete in all respect as per specification
and direction of the Engineer in Charge. etc.
Factory made GIRID FRP or called GRP
sandwich composite door shutter of 32mm
thick laminated with two GRP skin with good
grain finish fabricated using UV stabilised
isoppthalic gel coat and one layer of 450 gsm
E-glass chopped strand mat (CSM)
impregnated with ortopathilic resin The
thickness of the skins shall not be less than
1.50mm . Expanded polysryne ( EPS)
structural foam panel of 29 mm tickness and
a density of 20kg/cu.mts shall be used as
core material wooden reinforcements made of
sesasoned sal wood block of cross section
not less than 28mm x 32mm and also
152 151 necessary sal wood reinforcements for fitting 0 0.00 0.00 0.00
the metal fittings such as lower bolts ,aldrops,
handles etc. shall be provided . A structural
adhesive compatible with (EPS)foam shall be
used for bending the core material. the sal
wood reinforcements and the skin The
material and process for manufactuing te
door shutter shall conform to RV -TIFAC
components design centre's standards and
specification and the door shutters tested in
conformation to IS 4020-1998. The Finish of
door shutter will be plain colour as per
specification and direction of the Engineer in
Charge. etc. complete
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2023.02.08
Head Description of Item Unit Qnty. Rate Amount
Providing and fixing factory made 2 track 2
panel KOMMERLING uPVC white colour
sliding window comprising of uPVC multi-
chambered frame having section Frame
58mm x 49mm, Window sash: 37mm x
61mm, made out of lead free green profiles
with corners fusion welded, fully reinforced
with Galvanized steel 1.5/2.0 mm. The
windows profile should fulfill the requirements
of Viny 2010. The physical properties of the
profiles like Vicat softening temperature,
density, tensile strength, hardness,
weatherability, impact strength and Modulus
of Elasticity should be tested in accordance
with ASTM/DIN-ISO standards and the
thermal conductivity as per IS standards. The
window comprising of uPVC extruded glazing
beads of appropriate dimension, EPDM
gasket, G.I fasteners 100 x 8 mm size for
fixing frame to finished wall, plastic packers,
plastic caps and necessary stainless steel
screws etc. After fixing frame the gap
between frame and adjacent finished wall
shall be filled with weather proof silicon
sealant over backer rod of required size. The
sash will be fitted with 5mm clear glass ( float
).complete in all respect as per specification
and direction of the Engineer in Charge. etc.
Supplying and Fixing of M.S. Grills etc
including cost,conveyance of all
materials,priming,and labour for fitting fixing
etc.complete as per the instruction of
Engineer-in-Charge
Priming one coat with wall cement primer
(water bound) to make an even finished
surface in all floors and heights to wall
surface of approved make and shade
including sand papering, applying putty
172 171 wherever necessary & cost of scaffolding, 0 0.00 0.00 0.00
staging charges with cost, conveyance, taxes
of all materials, cost of all labour,labour cess
T&P etc. complete as per the direction of the
Engineer-in-charge.
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2023.02.08
Head Description of Item Unit Qnty. Rate Amount
Painting two coats with approved anti-fungal
weather seal paints (ISI) of approved colour,
shade on wall surface over a coat of wall
primer(ISI) water bound including sand
papering, polishing the surface, cost, 0 0.00 0.00 0.00
conveyances of all materials and cost of all
labour,labour cess with T&P etc, complete as
per specification & direction of Engineer-in-
Finishing plastered surfaces of walls with
cement based wall putty (Water based) of
approved make and finishing the surface
smooth and even by sand papering to receive
painting in walls, at all heights with staging
186 185 wherever necessary with cost, conveyance, 0 0.00 0.00 0.00
taxes of all materials, cost of all
labour,labourcess, all T&P etc. required for
the work complete in all respect as per the
direction of the Engineer-in-charge.
Painting two coats with plastic emulsion paint
"Royale Shyne" over a coat of water bond
cement primer to make an even finished
surface in all floors and heights to wall
surface of approved make and shade
193 192 including sand papering, applying putty 0 0.00 0.00 0.00
wherever necessary & cost of scaffolding,
staging charges with cost, conveyance of all
materials, cost of all labour,labour cess, T&P
etc. complete as per the direction of the
Engineer-in-charge.
Painting two coats with approved Enamel
200 199 Paint on wood work over a coat of Wood 0 0.00 0.00 0.00
Primer in Ground Floor
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2023.02.08
Head Description of Item Unit Qnty. Rate Amount
Providing and fixing stainless steel (Grade
304) railing made of Hollow tubes, channels,
plates etc., including welding, grinding,
buffing, polishing and making curvature
(wherever required) and fitting the same with
necessary stainless steel nuts and bolts
complete, i/c fixing the railing with necessary
accessories & stainless steel dash fasteners ,
207 206 stainless steel bolts etc., of required size, on 0 0.00 0.00 0.00
the top of the floor or the side of waist slab
with suitable arrangement as per approval of
Engineer-in-charge, (for payment purpose
only weight of stainless steel members shall
be considered excluding fixing accessories
such as nuts, bolts, fasteners etc.).
Providing and fixing 1 part Seal Arm Tape
TPE by sandwich with 2 component Epoxy
System Re Arm bond 4031 or equivalent, by
doing surface preparation as per ASTM D
4258/ 59 on the cured hardened RCC
Expansion joint concrete as per
manufacturer. specification (100 mm width
expansion joint – treatment with 200 mm
213 212 width tape) Applied top layer of mixed epoxy 0 0.00 0.00 0.00
adhesive @1 mm over the flexi joint tape and
extended a minimum 10 mm beyond edges of
the tape and allows for 24 hours self
curing.Protection of membrane by 250 mm
width Aluminum plate 2mm thick to be fixed
by Screw on one side and other side to left
unscrewed.(Optional)
Providing and application of Polyurethane
waterproof coating: After the primer EPW44,
Single component liquid applied Elastomeric
based waterproofing system AquaArm
WPU1KE or equivalent should be of
thickness of 1.5mm as directed by the
engineer in charge. The formed membrane
should have properties equal or more than at
28 days Elongation: 450 % confirming to
219 218 ASTM D412 Tear resistance: 10 N 0 0.00 0.00 0.00
confirming to ASTM D624 Shore hardness:
80 confirming to ASTM C 836 100% Modulus
Elongation: 0.6 MPa(ASTM D 412)Recovery
from 200% elongation: (ASTM D 412): > 80%
No cracking or tearing: Extensibility after heat
ageing(ASTM C 836) etc. as per direction of
E.I.CProtective cover is in client scope.
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2023.02.08
Head Description of Item Unit Qnty. Rate Amount
2.5 cm thick grading concrete (1:2:2) on roof
slab with 6.7mm & down grades size hard
granite crusher broken chips on new work
Providing and fixing of GRC Jali including
cost of material, conveyance of all materials,
223 222 cost of all labour,labour cess, T&P etc. Sqm 134.89 3809.04 5,13,801.41
complete as per the direction of the Engineer-
Providing and fixing of Swing Door of
approved make to be fabricated from roll
formed sections made of pre-painted steel
(base steel as per IS-513 of 0.6 mm thick “D”
quality, galvanized as per IS-277with zinc of
120 Gm/Sq.mtr) with total coated thickness
of 0.55 mm. Slide guide section should be
made of 0.5 mm stainless steel of 430 grade.
with paint specification being with primer of 5-
224 223 7 microns thick and finished paint with 0 0.00 0.00 0.00
polyster paint (Black /Pearl white/ Chocolate
Brown) of 12-16 microns along with the alkyd
backer at the back of 5-7 microns and the
Sections for external frame bottom and top
should be of 79 x 45 mm. external frame
sides should be of 69 x 24 mm, guide for top
and bottom should be of 69 x 26mm
(Stainless Steel).
Section for shutter should be of 26 x 30 mm,
Sash bar should be of 23 x
57mm.Accessories / gaskets are to be used
as per the manufacturer’s supply and
specification like gasket will be made of
EPDM. All corner brackets for internal and
external are to be made of glass filled nylon.
The sections are to be cut to length, joined
225 224 and assembled by means of corner bracket 0 0.00 0.00 0.00
and frames are fixed to the concrete/masonry
walls by means of self expanding screws and
glass to be used of 5 mm reflective with cost,
conveyance and taxes of all materials, cost of
all labour, T&P etc. complete as per the
direction of the Engineer-in-charge.
Providing fitting and fixing of Gypsum wall
false ceilling with Aluminium anodised T
Section No. 3215 with 2'-0" center to center,
L section No. 1705 upto 15 micron on 4 walls Sqm 106.89 1475.00 1,57,662.75
to be fixed by means of steel screw and
P.V.C plug and the Aluminium grid 2'-0"x2'-0"
suspended from ceiling etc complete
Making plinth protection 50mm thick of
cement concrete 1:3:6 (1 cement : 2 sand : 4
graded stone aggregate 20 mm nominal size)
over 100mm bed of dry brick ballast 40 mm Sqm 137.39 658.79 90,511.71
nominal size well rammed, consolidated and
grouted and fine sand and finishing the top
smooth in proper slop including all complete
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2023.02.08
Head Description of Item Unit Qnty. Rate Amount
Providing & laying of 60mm thick factory
made cement concrete interlocking paver
block of M35 grade and approved make
variety colour and size made by Block making
machin with strong vibratory compaction of
approved design and shape, laid in required
234 233 colour and pattern over 50mm thick Sqm 900.00 1062.00 9,55,800.00
compacted bed of coarse sand ,filling the
joints with fine sand etc.all compelte including
cost,conveyance,royalty,taxes of all
materials,labour,T & P etc.Complete as per
direction of EIC.
Cement Concrete (1:3:6) using 4cm size
hard granite C.B. metal approved quality from
approved quarry including cost, carriage,
royalty, cost of all labour. etc complete.(A.R.-
2006, Page No - 43, Item No. - 3)
Providing and laying at or near ground level
factory made Kerb stone of M-25 grade
cement concrete in position to the required
line, level and curvature, jointed with cement
mortar 1:3 (1 cement: 3 coarse sand),
including making joints with or without
grooves (thickness of joints except at sharp
236 235 curve shall not to more than 5mm), including cum 13.50 6905.83 93,228.73
making drainage opening wherever required
complete etc. as per direction of Engineer-in-
charge (length of finished kerb edging shall
be measured for payment). (Precast C.C.
Kerb stone shall be approved by Engineer in-
237 236 Sub-Total of Civil Works 0 0.00 0.00 11,54,22,944.94
238 1 Plumbing Works 0 0.00 0.00 0.00
Supplying all materials, labour, T&P and
cutting holes through existing brick work
including making good the damages in
239 2 cement mortar ( 1:4) for taking GI pipes 0 0.00 0.00 0.00
and fittings/ PVC pipes and fittings etc all
complete as per PH specification and
direction of the Engineer in charge.
240 3 In Ground Floor Each 135.00 56.05 7,566.75
Supplying all materials, labour, T&P and
cutting hole in R.C.C floors, roofs, etc upto
19 cm thick for passing G.I. Pipes / P.V.C
pipes and fittings etc and repairing the holes
after insertion of pipes etc with cement
concrete (1:2:4 ) including finishing complete
so as to make it leak proof as per direction of
the Engineer in charge.
246 9 In Ground Floor Each 130.00 192.22 24,988.86
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2023.02.08
Head Description of Item Unit Qnty. Rate Amount
Supplying all materials, labour, T&P and
cutting grooves in pucca floors and walls for
251 14 taking GI/PVC pipes and making good the 0 0.00 0.00 0.00
damages as per the direction of the Engineer
Supplying all materials, labour, T&P and
cutting holes through existing brick or laterite
masonry wall for taking HCI pipes and fittings
including making good the damages etc all
complete as per PH specification and
direction of the Engineer in charge
Supplying all materials, labour, T&P and fixing
water closet, squatting pan (Indian type W.C
pan / Orissa pattern squatting pan) duly
264 27 embedded in cement concrete (1:5:10) using 0 0.00 0.00 0.00
4cm size hard granite metal all complete as
per specification and direction of the Engineer
265 28 Fixing 580mmx440mm size Orissa pan Each 5.00 2975.96 14,879.80
Supplying all materials, labour, T&P and
constructing gully trap chamber of the
following inside size with 8cm thick R.C.C
precast cover slab in cement concrete (1:2:4)
mix using 12mm size h.g chips, foundation
concrete (1:4:8) using 40mm size hard
granite metal on bed and around trap, Fly ash
266 29 brickwork in c.m (1:6) in F&P and inside 0 0.00 0.00 0.00
12mm thick cement plastering (1:3) finished
with a floating coat of neat cement including
fixing 100mmx100mm size HCI gully
trap,150mmx150mm size C.I grating etc all
complete as per approved drawing,
specification and direction of the Engineer in
Gully trap chamber of size 250mmx250mm
with R.C.C cover slab
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2023.02.08
Head Description of Item Unit Qnty. Rate Amount
Supplying all materials, labour, T&P and
constructing inspection chamber of the
following size with cement concrete(1:3:6)
using 40mm size hard granite metal on bed,
1st class Fly ash brickwork in cement
mortar(1:6),moulding and shaping the
channel inside and benching with cement
concrete (1:2:4) using 12mm size h.g
chips,12mmthick cement plaster (1:3) with
268 31 punning to inside, cement flush pointing (1:3) 0 0.00 0.00 0.00
to outside, R.C.C cover slab in (1:2:4) using
12mm size h.g chips with RCC man hole
cover, earthwork in excavation in all kinds of
soil and refilling the cavity around the
chamber including watering, curing,
conveyance of all materials to worksite,
payment of royalty, taxes etc all complete as
per approved specification and direction of
the Engineer in charge
Inspection chamber Inside size
760mmx760mmx460mm
Supplying all materials, labour, T&P and filling
in foundation and plinth with sand well
watered and rammed including conveyance of
all materials to worksite, payment of royalty,
taxes etc all complete as per direction of the
Engineer in charge.
Supplying all materials, labour, T&P and
providing cement concrete (1:4:8) with 4cm
size hard granite metal including watering,
271 34 curing, conveyance of all materials to Cum 23.74 5348.82 1,27,002.43
worksite, payment of royalty, taxes etc all
complete as per specification and direction of
the Engineer in charge
Supplying all materials, labour, T&P and
providing cement concrete (1:2:4) with 12mm
size hard broken granite chips including
272 35 watering, curing, conveyance of all materials 0 0.00 0.00 0.00
to worksite, payment of royalty, taxes etc all
complete as per specification and direction of
the Engineer in charge
Supplying the waterproofing material Pidifin
2K of Dr.fixit on equivalent water proofing
material and appling in two coat over the
278 41 concrete floor and dado upto 1"-6" in wall 0 0.00 0.00 0.00
including cleaning,applying and mending as
per specification including all labour charges
as per direction of Engineer-in-charge.
279 42 In Ground , First floor & 2nd floor Sqm 736.06 316.24 2,32,772.88
Supplying all materials, labour, T&P and filling
in sunken floor in toilets with cinter (light
weight slag) well watered and rammed
280 43 include conveyance of all materials to Cum 23.74 655.79 15,570.96
worksite payment of royalty, taxes etc all
complete as per specification and direction of
the Engineer in charge
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2023.02.08
Head Description of Item Unit Qnty. Rate Amount
Construction of 6.75mx3.60m x 1.40m(h)
Rain water Recharge Pit
282 45 Sinking of tube well through D.T.H.Rig. 0 0.00 0.00 0.00
284 47 Lowering of PVC casing pipe inside bore. 0 0.00 0.00 0.00
Cutting slot in casing pipe for recharge of rain
Labour for packing gravel outside the tube
289 52 Cost of washed gravel. Cum 4.70 1902.63 8,942.37
Earth work in all kinds of soil within 50 mtr
initial lead and 1.5mtr initial lift including
rough dressing and breaking clods to
maximum 5cm to 7cm and laying in layers not
exceeding 0.3 mtr in depth and as per
direction of the Engineer in charge.
Supplying all materials, labour, T&P and
providing cement concrete (1:4:8) with 4cm
size hard granite metal including watering,
291 54 curing, conveyance of all materials to Cum 2.16 5348.82 11,577.53
worksite, payment of royalty, taxes etc all
complete as per specification and direction of
the Engineer in charge
Supplying all materials, labour, T&P and
providing brick work with Fly ash bricks
having crushing strength not less than
75kg/cm² with dimensional tolerance ± 8
292 55 percent in cement mortar (1:6) including Cum 11.40 5027.15 57,309.56
watering, curing, conveyance of all materials
to worksite, payment of royalty, taxes etc all
complete as per specification and direction of
the Engineer in charge
Supplying all materials, labour, T&P and
providing 12mm thick cement plaster (1:4) on
brickwork including watering, curing,
293 56 conveyance of all materials to worksite, Sqm 91.20 192.81 17,584.45
payment of royalty, taxes etc all complete as
per specification and direction of the Engineer
Supplying all materials, labour, T&P and
providing cement punning including watering,
curing, conveyance of all materials to
worksite, payment of royalty, taxes etc all
complete as per specification and direction of
the Engineer in charge
Supplying all materials, labour, T&P and
providing rigid and smooth centering and
shuttering for R.C.C works including false
work and dismantling them after casting Sqm 3.13 521.44 1,632.11
including conveyance of all materials to
worksite, payment of royalty, taxes etc all
complete as per specification and direction of
the Engineer in charge
Earth work in excavation of foundation in all
kinds of soil within 50 mtr initial lead and
1.5mtr initial lift including rough dressing and
296 59 breaking clods to maximum 5cm to 7cm and Cum 0.25 254.75 63.69
laying in layers not exceeding 0.3 mtr in depth
and as per direction of the Engineer in
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2023.02.08
Head Description of Item Unit Qnty. Rate Amount
Supplying all materials, labour, T&P and
providing M.S reinforcement for R.C.C work
including cutting, bending, binding, and tying
the grills and placing in position including cost
297 60 of binding wire 18 to 20 gauge, conveyance Qntl. 0.25 10988.16 2,747.04
of all materials to worksite, payment of
royalty, taxes etc all complete as per
specification and direction of the Engineer in
298 61 Providing and filling filter media 0 0.00 0.00 0.00
300 63 20mm size washed gravel Cum 6.00 2033.73 12,202.38
Providing fitting and fixing M.S.grill,Jalli cover
over the harvesty pindi
Supplying all materials, labour, T&P and
constructing surface drain of size A-4 type
with cement concrete (1:3:6) using 12mm
size h.g chips on bed, 1st class Fly ash
brickwork in cement mortar (1:3) inside,
303 66 12mm thick cement plaster (1:3) finished mtr 180.00 969.72 1,74,550.32
smooth with cement punning including
watering, curing, conveyance of all materials
to worksite, payment of royalty, taxes etc all
complete as per specification and direction of
the Engineer in charge
Supplying all materials, labour, T&P and
laying in trenches (to level or slope)
unplasticized PVC pipes conforming to IS:
4985/2000 of the following outside dia for
class–3(0.60mpa) including jointing with
supply of approved solvent cement by non-
heat application method/as per
manufacturer’s specification, providing and
laying in trench cement concrete (1:4:8) with
40mm size hard granite metal in the Type C-1
standard bedding surrounding or encasing
including concrete for bedding and curing etc
all complete as per PH specification and
direction of the Engineer in charge.
305 68 110mm dia u-pvc pipe alround concrete mtr 180.00 1268.62 2,28,351.24
306 69 160mm dia u-pvc pipe alround concrete mtr 140.00 2052.96 2,87,414.96
307 70 200mm dia u-pvc pipe alround concrete mtr 150.00 2220.76 3,33,114.00
Supplying all materials, labour, T&P and
constructing man hole chamber of the
following size with cement concrete(1:3:6)
using 40mm size hard granite metal on bed,
1st class Fly ash brickwork in cement
mortar(1:6), moulding and shaping the
channel inside and benching with cement
concrete (1:2:4) using 12mm size h.g
chips,12mmthick cement plaster (1:3) with
308 71 punning to inside, cement flush pointing (1:3) 0 0.00 0.00 0.00
to outside, R.C.C cover slab in (1:2:4) using
12mm size h.g chips with RCC man hole
cover, earthwork in excavation in all kinds of
soil and refilling the cavity around the
chamber including watering, curing,
conveyance of all materials to worksite,
payment of royalty, taxes etc all complete as
per approved specification and direction of
the Engineer in charge
Man hole chamber Inside size
910mmx910mmx910mm
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2023.02.08
Head Description of Item Unit Qnty. Rate Amount
Supplying all materials, labour, T&P and
constructing soakway pit of the following size
with dry brick walling from bottom upto invert
of inlet pipe and 1st class Fly ash brickwork
in cement mortar (1:6) for the remaining
height at top, cement concrete (1:4:8) using
40mm size hg chips on bed, 12mm thick
cement plaster (1:4) inside and outside over
masonry brickwork, gravel backing in the rear
311 74 of well steining, RCC cover slab in cement 0 0.00 0.00 0.00
concrete (1:2:4) using 12mm size hg chips
fitted with iron lifting handles including
earthwork in open well excavation in all kinds
of soil and refilling of cavity around the pit &
painting the iron works, watering, curing,
conveyance of all materials to worksite,
payment of royalty, taxes etc all complete as
per approved specification and direction of
the Engineer in charge
Brick masonry soakway pit 1.40m dia x
Construction of RCC Over head Tank of
Supplying all materials, labour, T&P and
providing cement concrete (1:1½:3)with
12mm size hard broken granite chips for
R.C.C works including hoisting, laying,
watering, curing, conveyance of all materials
to worksite, payment of royalty, taxes etc all
complete as per specification and direction of
the Engineer in charge
Supplying all materials, labour, T&P and
providing M.S.Reinforcement for RCC work
including cutting, banding, binding,
straightening and trying the grills and placing
in position including cost of binding wire 18 to
Supplying all materials, labour, T&P and
providing rigid and smooth centering and
316 79 shuttering for RCC work including false work 0 0.00 0.00 0.00
and dismantling then after casting including
cost of materials complete in ground floor.
317 80 RCC floor roof, chajja etc sqm 44.51 1017.51 45,289.55
318 81 RCC Beam, Column, wall etc sqm 71.73 1960.81 1,40,648.61
Supplying all materials, labour,T&P and
providing 6mm thick cement plasster (1:4)
over CC work including watering curring and
conveyance of all materials to site.
Supplying all materials, labour, T&P and
providing cement punning including watering,
curring and conveyance of all materials to
321 84 Quantity same as item No-4 sqm 42.24 46.02 1,943.88
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2023.02.08
Head Description of Item Unit Qnty. Rate Amount
Supplying and fitting and fixing stainless steel
34 grade in said rail using 5mm dia 2mm
thick circular pipe and lalustrade
32mmx32mmx2mm at the rate of mtr.Center
322 85 to center and square pipe 32x32x2mm below Kg 50.00 395.30 19,765.00
including welding with stanless steel elect rod
and fixing with necessary accessories
etc.complete as per direction of the Engineer-
Providing fitting and fixing MS cover made out
of MS angle and sheet duly welding and fixing
with frame and hinges along with locking
arrangement of size 60cmx60cm etc
complete as per direction of Engineer-in-
Construction of 100000 Liters RCC Under
ground Reserver
Providing & Constructing RCC underground
sump of 100000 ltr. Capacity including RCC
top cover, ladder, airvent, inlet and outlet
325 88 pipe, water proofing including pipeline from 0 0.00 0.00 0.00
UG Sump to top over head tank with its pump
and etc. as per the design provided by the
engineer in charge,
Construction 2 no 100 users RCC Septic
Earth work in excavation of foundation in all
kinds of soil within 50m initial lead and 1.5m
initial lift including rough dressing & breaking
clods to maximum 5cm to 7cm and laying in
layers not exceeding 0.3m in depth and as
per direction of the Engineer-in-Charge.
-do- with Ist disintegrated rockadditional
depth of 1.50 m over the initial lead and lift
Supplying all materials,labour ,T&P and filling
in foundation and plinth with sand well
watered and rammed including cost,
conveyance of all materials to work site
,payment of royalty,taxes etc. all complete as
per direction of the Engineer-in -charge
Supplying all materials, labour, T&P and
providing cement concrete ( 1:4:8 ) with 4cm
size crusher broken hard granite metal
including watering, curing, cost of all
materials,conveyance of all materials to work
site with payment of royalty, all taxes etc all
complete as per P.W.D specification and
direction of Engineer-in-charge.
Supplying all materials, labour, T&P and
providing cement concrete ( 1:2:4 ) with
12mm size crusher broken hard black granite
chips including watering, curing,cost of all
materials, conveyance of all materials to work
site with payment of royalty, all taxes etc all
complete as per P.W.D specification and
direction of Engineer-in-charge
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2023.02.08
Head Description of Item Unit Qnty. Rate Amount
Supplying all materials, labour, T&P and
providing cement concrete (1:1:5:3) with
12mm size hard broken granite chips for
R.C.C works including hoisting, laying,
watering, curing, conveyance of all materials
to worksite, payment of royalty, taxes etc all
complete as per specification and direction of
the Engineer in charge
Supplying all materials, labour, T&P and
providing rigid and smooth centering and
shuttering for R.C.C works including false
work and dismantling them after casting 0 0.00 0.00 0.00
including conveyance of all materials to
worksite, payment of royalty, taxes etc all
complete as per specification and direction of
the Engineer in charge
Supplying all materials, labour, T&P and
providing M.S reinforcement for R.C.C work
including cutting, bending, binding, and tying
the grills and placing in position including cost
340 103 of binding wire 18 to 20 gauge, conveyance 0 0.00 0.00 0.00
of all materials to worksite, payment of
royalty, taxes etc all complete as per
specification and direction of the Engineer in
Supplying all materials,labour,T&P and
providing 6mm CP (1:4) with cement punning
on brick work including watering,curing,cost
342 105 of all materials, conveyance of all materials to sqm 167.64 196.94 33,015.36
worksite,payment of royalty,all taxes etc.all
complete as per PWD specification and
direction of the Engineer-in-charge.
Supplying all materials, labour, T&P and
providing,fitting and fixing 100mm x 100mm x
100mm SW Tee in wall including filling the
recess with cement concrete (1:3:6) with
343 106 12mm size h.g chips all complete including Each 4.00 440.61 1,762.45
watering, curing, conveyance of all materials
to worksite, payment of royalty all complete
as per specification and direction of the
Engineer in charge
Supplying all materials, labour, T&P and
making MS step iron in 20mm diameter MS
steel bars and fixing into walls of man
hole/septic tank duly embedded in cement
concrete (1:3:6) complete as per specification
and direction of the Engineer in charge.
Filling in foundation and plinth with excavated
materials, moorum including watering and
ramming as directed by the Engineer in
Supplying all materials, labour, T&P and
providing and fixing to wall or ceiling and floor
C-PVC pipes conforming to pipe fittings of
346 109 the following nominal bore with clamps 0 0.00 0.00 0.00
including making good the wall, ceiling and
floor all complete as per specification and
direction of the Engineer in charge
347 110 In Ground Floor-20mm dia C-PVC pipe Mtr 120.00 288.63 34,635.36
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2023.02.08
Head Description of Item Unit Qnty. Rate Amount
349 112 In 1st Floor-20mm dia C-PVC pipe Mtr 120.00 298.42 35,810.64
351 114 In 2nd Floor-20mm dia C-PVC pipe Mtr 120.00 308.33 37,000.08
353 116 In 3rd Floor-20mm dia C-PVC pipe Mtr 120.00 318.13 38,175.36
355 118 In 4th Floor-20mm dia C-PVC pipe Mtr 120.00 327.92 39,350.64
Supplying all materials, labour,T&Pand
providing and fixing to wall or ceiling and floor
pvc pipes conforming to ASTM-D-1785/04
(Sch-80) and pipe fittings of the following 0 0.00 0.00 0.00
nominal bore with clamps including making
good the wall, ceiling and floor all complete
as per specification and direction of the
Engineer in charge
In Ground Floor-25mm dia PVC ASTM Pipe
360 123 In 1st Floor- 32mm dia PVC ASTM Pipe Mtr 130.00 291.70 37,920.48
362 125 In 2nd Floor-40mm dia PVC ASTM Pipe Mtr 130.00 407.22 52,938.34
364 127 In 3rd floor -40mm dia PVC ASTM Pipe Mtr 130.00 419.14 54,487.68
366 129 In 4th floor -40mm dia PVC ASTM Pipe Mtr 130.00 430.94 56,021.68
In terrace floor - 50mm dia PVC ASTM pipe
Supplying all materials, labour, T&P and
fitting and fixing brass/CP fittings of the
following nominal bore with supply of all
jointing materials complete as per
specification and direction of the Engineer in
15 mm dia CP L.B. Bib cock(CON-CHR-
15mm dia CP angle stop cock (Con-CHR-
20mm dia CP Con. stop cock (CON-CHR-
15mm dia CP two in one bib cock (Con-CHR-
15mm dia CP Health faucet (Con-ALD-MCH-
375 138 15mm dia CP extension piece Each 35.00 69.97 2,449.09
376 139 Pillar cockFLR-CHR-5031N Each 42.00 2526.26 1,06,103.00
377 140 125mm dia C.P.gratings. Each 90.00 99.24 8,931.42
15mm C.P.revolving shower with 15mm x
225mm long CP shower arm.
380 143 Elbow action Bib cockFLR-SSF-5043N Each 15.00 3484.54 52,268.10
381 144 25mm dia brass Fullway valve Each 80.00 1095.28 87,622.08
382 145 32mm dia brass Fullway valve Each 45.00 1603.50 72,157.59
383 146 40mm dia brass Fullway valve Each 52.00 2035.85 1,05,864.41
384 147 50mm dia brass Fullway valve Each 35.00 3014.31 1,05,500.85
385 148 25mm CPVC Ball valve Each 45.00 396.72 17,852.22
Providing and fixing Urinal of Hindware of cat
no- 60005 quality conforming to IS standards.
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2023.02.08
Head Description of Item Unit Qnty. Rate Amount
Supplying all materials, labour, T&P and
fitting and fixing 10 litres capacity low level
flushing cistern with a pair of cast iron or M.S
brackets complete with fittings such as
siphonic arrangements 15mm nominal size
brass/pvc ball valve with polythene float CP
brass handle, unions and couplings for
387 150 connection with inlet, outlet and overflow 0 0.00 0.00 0.00
pipes,32mm dia CP flush bend,15mm dia pvc
inlet connection pipe including cutting holes
and making good the same and connecting
the flush bend with cistern and closet and
connecting the inlet pipe with supply main etc
all complete as per specification and direction
of the Engineer in charge
388 151 10 litres PVC L.L. Cistern (Slimline-white) Each 35.00 1853.07 64,857.52
Supplying all materials, labour, T&P and
fitting and fixing U-PVC SWR soil waste
ventilating pipes and fittings of the following
outside diameter conforming to ISI No.
13592/1992 to walls with nails, bobbins and
wooden plugs or laying in trenches including
jointing with supply of approved rubber
lubricant by non-heat application method/as
per manufacturer’s specification, testing,
earthwork in excavation in all kinds of soil and
refilling of trenches as per specification and
direction of the engineer in charge
100mm dia U-PVC SWR
pipes(Supreme/Ashirvad)
75mm dia U-PVC SWR
pipes(Supreme/Ashirvad)
393 156 100mm dia U-PVC Door Tee Each 65.00 346.45 22,519.12
394 157 100mm dia U-PVC Plain Bend Each 55.00 273.76 15,056.80
395 158 100mm U-PVC Door Cross Tee Each 45.00 650.42 29,268.72
396 159 75mm dia U-PVC Door Bend. Each 65.00 265.50 17,257.50
397 160 75mm dia U-PVC Plain Bend. Each 30.00 217.12 6,513.60
399 162 75mm dia Multi Floor Trap Each 35.00 348.45 12,195.89
PVC Clamp suitable for 75mm to 110mm dia
Supplying all materials, labour, T&P and fixing
Wash Down Water Closet (European type
W.C pan) with integral ‘S’ or ‘P’ trap to the
floor with wooden plug and chromium plated
screws including jointing the trap with soil
pipe in cement mortar (1:1) etc all complete
as per specification and direction of the
Engineer in charge.
405 168 E.W.C. with seat cover Each 27.00 3065.88 82,778.65
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2023.02.08
Head Description of Item Unit Qnty. Rate Amount
Supplying all materials, labour, T&P and fixing
wash basins with hole for pillar taps
conforming to IS:2556-part-4-2004 with cast
iron or M S brackets painted white including
cutting holes in walls and making good the
damages with supply of wooden plugs,
screws and cement etc, fixing pedestal for
wash basin recessed at the back for the
reception of pipes and fittings, fixing PVC
waste pipe of 32mm nominal diameter for
407 170 wash basin including brass check nut 0 0.00 0.00 0.00
complete, fixing pillar taps capstan head
screw down high pressure lettered ‘Hot’ and
‘Cold’ with long screws, shanks and back
nuts of 15mm dia nominal bore(Plaza make),
fixing 15mm dia PVC inlet connection pipe
and making connection with pillar cocks and
supply mains for wash basin, fixing 32mm dia
CP brass waste(Plaza make), etc all
complete as per specification and direction of
the Engineer in charge
550mm x 400mm size W. H. Basin with Half
409 172 Under Counter basinNo.10095. Each 15.00 4800.71 72,010.68
Supplying all materials, labour, T&P and fixing
mirror of superior glass conforming to
IS:3438-1996 mounted on 6mm thick A.C
410 173 sheet or plywood sheet and fixed to wooden 0 0.00 0.00 0.00
plugs with CP screws and washers complete
as per specification an direction of the
Engineer in charge
Fixing 600mmx450mm size B.E mirror (fixed
413 176 Large size mirror with frame 0 0.00 0.00 0.00
Supplying all materials, labour, T&P and fixing
standard sized glass-shelf with CP brass
brackets and guard rails complete fixed to
wooden plugs with CP screws as per
specification and direction of the Engineer in
600 x 125mm plate glass shelf with CP guard
Supplying all materials, labour, T&P and fixing
standard sized CP towel rail complete with
417 180 CP brass brackets fixed to wooden plugs with 0 0.00 0.00 0.00
CP screws as per specification and direction
of the Engineer in charge
418 181 25mm x 600mm long CP towel rail Each 15.00 827.65 12,414.78
419 182 CP towel rail Ring. Each 71.00 552.95 39,259.31
Supplying all materials, labour, T&P and fixing
CP soap holder complete with CP brass
420 183 brackets fixed to wooden plugs with CP 0 0.00 0.00 0.00
screws as per specification and direction of
the Engineer in charge
Supplying all materials, labour, T&P and fixing
wash kitchen sink/laboratory sink with cast
iron or M S brackets painted white including
cutting holes in walls and making good the
damages etc all complete as per specification
and direction of the Engineer in charge
423 186 600x450x250 mm Porceloain sink Each 10.00 5843.48 58,434.78
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2023.02.08
Head Description of Item Unit Qnty. Rate Amount
Providing 15 mm dia Sink cock of Hindware
having cat no - F210024 as per IS : 13983
424 187 and stainless steel plug 40 mm, including NOS 15.00 7962.76 1,19,441.37
painting of fittings and brackets, cutting and
making good the walls wherever required :
Supplying all materials, labour, T&P and
providing fitting and fixing Pure Chill 120 PSS
UV of size 750x570x1350mm height with
water storage capacity 120 liters along with 3
425 188 nos of faucets 2 for cold water and 1 for 0 0.00 0.00 0.00
normal water including a flow of 1.5 ltr per
minute etc all complete as per approved
drawing,specification and direction of the
Engineer in charge.
428 191 Sinking of tube well through D.T.H.Rig. 0 0.00 0.00 0.00
430 193 Lowering of PVC casing pipe inside bore. 0 0.00 0.00 0.00
Cutting slot in casing pipe for recharge of rain
Labour for packing gravel outside the tube
435 198 Cost of washed gravel. Cum 9.40 1902.63 17,884.74
436 199 For Production well. 0 0.00 0.00 0.00
2 H.P three phase 3 stage head range 30 to
437 200 54 metres, discharge 155 to 110 L.P.M with Each 2.00 19618.21 39,236.42
outlet dia of 32mm
438 201 DOL controll pannel Each 2.00 4490.49 8,980.98
440 203 32mm dia steel short piece Each 4.00 179.71 718.86
441 204 Steel rope with cover Mtr 130.00 31.51 4,095.78
443 206 50mm size CI bracket Each 2.00 107.73 215.47
444 207 20mm dia rigid UPVC pipes Mtr 100.00 8.14 814.20
445 208 Sub-Total of Plumbing Works 0 0.00 0.00 1,14,87,581.87
446 1 Electrical Works 0 0.00 0.00 0.00
447 2 Modular Wiring 0 0.00 0.00 0.00
Recessed wirring to light point/ fan point/
exhaust fan point/ call bell point with 1.5
sq.mm FRLSH/LSZH PVC insulated copper
conductor of ISI marked with 20 mm dia
PVC flexible non metallic conduit FRLS type
ISI marked 6A modular type (anti
bactorial & flame retradant type) switch ISI
marked , and ceiling rose ISI marked of
modular type G.I box with metallic cover
plate (both side) (anti bactorial & flame
retradant type) of suitable size, modular
box with 1.5 sq. Mm FRLSH PVC insulated
single core multistandard copper conductor
as earth wire including all accessories and
connection as per direction of Engineer -in -
Charge. CATAGORY AS FOLLOWS ,complete
suitable for IPH standard hospital. All the
switches & sockets should be warrantied for
a replacement period of 2 years against
defects with ncessary test report &
Warrnaty certificate to be submitted to the
department for genuinity of product & to
avail free after sales service within warranty
period for acceptance of materials.
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2023.02.08
Head Description of Item Unit Qnty. Rate Amount
Group control of point in Recessed wirring
to light point/ fan point/ exhaust fan point/
call bell point with 1.5 sq.mm FRLSH/LSZH
PVC insulated copper conductor of ISI
mm dia PVC flexible non metallic conduit
FRLS type ISI marked with 6A modular
type((anti bactorial & falme retradant
type)) switch ISI marked and ceiling rose
ISI marked of modular type G.I box with
metallic cover plate (both side)(anti
bactorial & falme retradant type) of
suitable size, modular box with 1.5 sq. Mm
452 7 FRLS PVC insulated single core Nos 56.00 1211.86 67,864.16
multistandard copper conductor as earth
wire including all accessories and
connection as per direction of Engineer -in -
Charge. CATAGORY AS FOLLOWS ,complete
suitable for IPH standard
hospital.(Maximum 02 nos point in one
circuit).All the switches & sockets should be
warrantied for a replacement period of 10
years against defects with ncessary test
report & Warrnaty certificate to be
submitted to the department for genuinity
of product & to avail free aftersales service
within warranty period for acceptance of
Supplying ,fixing of 6A Plug on the same
board in existing switch board with
complete fitting by 01 no of 6A switch &
socket (modular type)( (anti bactorial &
flame retradant type)) & other required
accessories of ISI marked as approved as
per direction of Engg. -in -Charge. ,
complete suitable for IPH standard
453 8 hospital.(Maximum 02 nos point in one Nos 100.00 227.74 22,774.00
circuit).All the switches & sockets should be
warrantied for a replacement period of 2
years against defects with ncessary test
report & Warrnaty certificate to be
submitted to the department for genuinity
of product & to avail free aftersales service
within warranty period for acceptance of
Supplying,fixing of 6A Plug on the separate
board with complete fitting by 01 no of 6A
switch & socket(modular type)( (anti
bactorial & flame retradant type)) with
suitable size modular box & cover(anti
bactorial & falme retradant type) including
supplying of all required accessories of ISI
marked as approved as per direction of
engg-in-charge..complete suitable for IPH
standard hospital.(Maximum 02 nos point
in one circuit).All the switches & sockets
should be warrantied for a period of 10
years against manufacturing defects
against which ncessary test report &
Warrnaty certificate to be submitted to the
department for genuinity of product & to
avail free aftersales service within warranty
period for acceptance of materials.
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2023.02.08
Head Description of Item Unit Qnty. Rate Amount
Supplying,fixing of 1x16A Plug on the
separate board with complete fitting by 01
no of 16A switch & socket(modular
type)((anti bactorial & flame retradant
type)) with suitable size modular box &
cover(anti bactorial & falme retradant type)
including supplying of all required
accessories of ISI marked as approved as
455 10 per direction of engg-in-charge.. , (For Nos 45.00 761.10 34,249.50
equipement power)All the switches &
sockets should be warrantied for a
replacement period of 10 years against
defects with ncessary test report &
Warrnaty certificate to be submitted to the
department for genuinity of product & to
avail free aftersales service within warranty
period for acceptance of materials.
Supplying,fixing of 2x6A+1X1 6A Plug on
the separate board with complete fitting by
01 no of 16A+2 no 6A switch &
socket(modular type) ( (anti bactorial &
falme retradant type) with suitable size
modular box & metallic cover plate (both
side)(anti bactorial & falme retradant
type)including supplying of all required
accessories of ISI marked as approved as
per direction of engg-in-charge.., (For
equipement power)complete suitable for
IPH standard hospital.(Maximum 02 nos
point in one circuit).All the switches &
sockets should be warrantied for a
replacement period of 10 years against
defects with ncessary test report &
Warrnaty certificate to be submitted to the
department for genuinity of product & to
avail free aftersales service within warranty
period for acceptance of materials.
Supplying,fixing of 3x6A+1X1 6A Plug on
the separate board with complete fitting by
01 no of 16A+3 nos 6A switch &
socket(modular type) ( (anti bactorial &
falme retradant type) with suitable size
modular box & metallic cover plate (both
side)(anti bactorial & falme retradant
type)including supplying of all required
accessories of ISI marked as approved as
per direction of engg-in-charge.., (For
equipement power)complete suitable for
IPH standard hospital.(Maximum 02 nos
point in one circuit).All the switches &
sockets should be warrantied for a
replacement period of 10 years against
defects with ncessary test report &
Warrnaty certificate to be submitted to the
department for genuinity of product & to
avail free after sales service within warranty
period for acceptance of materials.
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2023.02.08
Head Description of Item Unit Qnty. Rate Amount
Receass wiring for circuit/submain wiring
with the following mentioned size PVC
FRLSH/LSZH insulated, copper conductor,
single core cable or equievalant reputed
make A catagory ISI marked as approved,
in recessed PVC conduit Heavy duty FRLS
458 13 of mentioned size as required as per 0 0.00 0.00 0.00
direction of Engg.-in-Charge. Ncessary test
report & Warrnaty certificate to be
submitted to the department for genuinity
of product & to avail free after sales service
within warranty period for acceptance of
2 nos single core 1.5 sq. mm copper wire
for phase and neutral and 01 no of single
core 1.5 sq. mm copper wire for earth
continuty conductor. In 20 mm dia non
metallic heavy duty flexible conduit (LDB
to LSB/LIGHT CKT)(2X1.5+1X1.5)
2 nos single core 2.5 sq. mm copper wire
for phase and neutral and 01 no of single
core 1.5 sq. mm copper wire for earth
460 15 continuty conductor in 20 mm dia non Mtr 568.00 171.10 97,184.80
metallic heavy duty flexible conduit.(BDB
to LSB/LIGHT CKT/5A PLUG/INVERTER
POINT TO EACH QTR) (2X2.5+1X1.5)
4 nos single core 2.5 sq. mm copper wire
for phase and neutral and 02 nos of single
core 2.5 sq. mm copper wire for earth
continuty conductor .in 25 mm dia non
metallic heavy duty flexible conduit(LDB to
LSB/5A SOCKET) (4X2.5+2X2.5)
2 nos single core 4 sq. mm copper wire for
phase and neutral and 01 no of single core
1.5 sq. mm copper wire for earth continuty
conductor in 20 mm dia non metallic heavy
duty flexible conduit .(PDB to PSB/ GAYSER
POINT/AC POINT/ROOM LIGHT CONTROL
TO CORRIDOOR POINT/DG PANEL
ESSENTIAL LOAD) (2X4+1X1.5)
4 nos single core 4 sq. mm copper wire for
phase and neutral and 02 nos of single core
2.5 sq. mm copper wire for earth continuty
463 18 conductor in 32 mm dia non metallic heavy Mtr 320.00 289.10 92,512.00
duty flexible conduit.(PDB to PSB/GAYSER.
POINT/AC POINT/DG PANEL ACCL TO EACH
QTR ESSENTIAL LOAD) (4X4+2X2.5)
2 nos single core 6 sq. mm copper wire for
phase and neutral and 01 no of single core
2.5 sq. mm copper wire for earth continuty
conductor in 25 mm dia non metallic heavy
duty flexible conduit .(LFDB TO LBDB)
4 nos single core 6 sq. mm copper wire for
phase and neutral and 02 nos of single core
2.5 sq. mm copper wire for earth continuty
conductor in 32 mm dia non metallic
heavy duty flexible conduit.(LFDB TO
LBDB/power unit/point) (4X6+2X2.5)
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2023.02.08
Head Description of Item Unit Qnty. Rate Amount
4 nos single core 10 sq. mm copper wire for
phase and neutral and 02 nos of single core
4 sq. mm copper wire for earth continuty
conductorin 32 mm dia non metallic heavy
duty flexible conduit .(LFDB TO FLOOR
PANEL TO TPN BDB light ) (4X10+2X4)
4 nos single core 16 sq. mm copper wire for
phase and neutral and 02 nos of single core
10 sq. mm copper wire for earth continuty
conductor in 40 mm dia non metallic heavy
duty flexible conduit.(FLOOR PANEL TO TPN
BDB power) (4X16+2X10)
Supplying and fixing 20 amps, 240 volts,
SPN, industrial type socket outlet, with 2
pole and earth metal enclosed plug top
along with 32 amps. C-series, SP MCB, in
sheet steel enclosure, on surface or in
recess, with chained metal cover for the
socket outlet, and complete with
connections, testing and commissioning etc.
468 23 as required as per direction of Engg.-in- Nos 36.00 726.88 26,167.68
Charge.. . ,All the Components should be
warrantied for a replacement period of 5
years against defects with ncessary test
report & Warrnaty certificate to be
submitted to the department for genuinity
of product & to avail free aftersales service
within warranty period for acceptance of
Supplying and fixing 32 amps, 415 volts,
TPN, industrial type socket outlet, with 4
pole and earth metal enclosed plug top
along with 32 amps. C-series, TP MCB, in
sheet steel enclosure, on surface or in
recess, with chained metal cover for the
socket outlet, and complete with
connections, testing and commissioning etc.
469 24 as required as per direction of Engg.-in- Nos 4.00 5128.28 20,513.12
Charge.. . Equievalant higher model of .All
the Components should be warrantied for a
replacement period of 5 years against
defects with ncessary test report &
Warrnaty certificate to be submitted to the
department for genuinity of product & to
avail free aftersales service within warranty
period for acceptance of materials.
Supplying and fixing following size/
modules, GI box along with modular base &
metallic cover plate (both side)(anti
bactorial type) plate for modular switches in
recess etc as required as per direction of
Engg.-in-Charge. .All the Components
470 25 should be warrantied for a replacement 0 0.00 0.00 0.00
period of 5 years against defects with
ncessary test report & Warrnaty certificate
to be submitted to the department for
genuinity of product & to avail free
aftersales service within warranty period for
acceptance of materials.
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2023.02.08
Head Description of Item Unit Qnty. Rate Amount
Supplying and fixing of following sizes of
medium class PVC FRLS conduit ISI
marked along with accessories in
474 29 surface/recess including cutting the wall 0 0.00 0.00 0.00
and making good the same in case of
recessed conduit as required as per
475 30 direction
20 MM of Engg.-in-Charge mtrs 68.00 115.64 7,863.52
Supply and fixing modular type indicator
on the existing switch box/cover .
Equievalant higher model as required as
per direction of Engg.-in-Charge.All the
Components should be warrantied for a
477 32 replacement period of 5 years against Nos 32.00 126.26 4,040.32
defects with ncessary test report &
Warrnaty certificate to be submitted to the
department for genuinity of product & to
avail free aftersales service within warranty
period for acceptance of materials.
Supplying and installation of AC starter
Modular type, coil voltage-415 Volt A.C. &
O/L range of 9-14A range on mod Box of
suitable size including modular coveras
required as per direction of Engg.-in-Charge
.All the Components should be warrantied
for a replacement period of 5 years against
defects with ncessary test report &
Warrnaty certificate to be submitted to the
department for genuinity of product & to
avail free aftersales service within warranty
period for acceptance of materials.
Supply and fixing CALL bell (Ding dong
type) /Buzzer on the existing switch
box/cover. .as required as per direction of
Engg.-in-Charge.All the Components should
be warrantied for a replacement period of 5
479 34 years against defects with ncessary test Nos 10.00 241.90 2,419.00
report & Warrnaty certificate to be
submitted to the department for genuinity
of product & to avail free aftersales service
within warranty period for acceptance of
S/F of Bakelite angle holder/batten holder
of ISI marked conforming to IS-1258/1987
in place of ceiling rose as per direction of
Engg.-in-Charge .All the Components
should be warrantied for a replacement
480 35 period of 5 years against defects with EACH 34.00 71.98 2,447.32
ncessary test report & Warrnaty certificate
to be submitted to the department for
genuinity of product & to avail free
aftersales service within warranty period for
acceptance of materials.
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2023.02.08
Head Description of Item Unit Qnty. Rate Amount
Supplying,fixing of Blanking plate(modular
type)( (anti bactorial & flame retradant
type)) in existing switch box(anti bactorial
& flame retradant type) including supplying
of all required accessories of ISI marked
as approved as per direction of engg-in-
charge..complete suitable for IPH standard
hospital.It should be warrantied for a
period of 10 years against manufacturing
defects against which ncessary test report &
Warrnaty certificate to be submitted to the
department for genuinity of product & to
avail free aftersales service within warranty
period for acceptance of materials.
482 37 Light fitting Fixture & Fan 0 0.00 0.00 0.00
Supplying, installation, of exhaust fan of
heavy duty 300 mm sweep of exhaust fan
in the existing wall, including fixing &
conntection as required as per direction of
Engg.-in-Charge. Replacement Warranty
will be 5 years.
Supplying, installation, of exhaust fan of
heavy duty 380 mm sweep 1400 rpm with
louvers of exhaust fan in the existing wall,
including fixing & conntection .as required
as per direction of Engg.-in-Charge.
Replacement Warranty will be 5 years.
Supplying, installation, testing and
commssioning of 1400 mm sweep
white/milky colour ceiling fan including
wiring the down rod of standard length
(upto 30 cm) with 1.5 sq mm PVC
insulated, copper conductor, single core
cable etc. as required.(With fan Regulator)
as required as per direction of Engg.-in-
Charge.Replacement Warranty will be 5
Supplying, installation, testing and
commssioning of 1200 mm sweep
white/milky colour ceiling fan including
wiring the down rod of standard length
insulated, copper conductor, single core
cable etc. as required as per direction of
Engg.-in-Charge,Replacement Warranty will
be 5 years.. .(With fan Regulator)
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2023.02.08
Head Description of Item Unit Qnty. Rate Amount
Supplying and fixing of Energy
efficient Recess mounted LED luminaire
made up of CRCA powder coated sheet
steel housing of 595 X 595 mm x 70 mm
size with of not more than 25W and
system lumens output not less than 3250
lumens (130 lm/ wt) with diffusers for
better light transmission and pure effect
with High luminous flux LEDs for better
light output, CRI not less than 80, CCT of
5700-6500 degree K, THD less than
487 42 10%,internal surge protection of 3 KV, No 132.00 3158.86 4,16,969.52
complete with Non integrated isolated
electronic driver (protects the output
/secondary side from any disturbance on
the input / primary side ensuring safe
operation)and all other accessories suitable
for operation on140- 270 V, 50 Hz ,L70
@50,000 burning hrs (5 years
warranty)supply .as required as per
direction of Engg.-in-Charge . The
luminaire must be Replacement Warranty
will be 5 years.
Supplying and fixing of Energy
efficient recessed mounted LED luminaire
made up of CRCA powder coated housing,
Top opening clean room LED luminaire of
600 X 600 x 65 mm size with of 45 W and
system lumens output not less than 4500
lumens , IP65 ,dust free & zero
maintenance , anti glare high
transmittance PMMA diffuser , operating
volatge range 150-265 V, high performance
488 43 potentiometric electronic driver for zero Nos 36.00 6615.08 2,38,142.88
maintenance , 2.5 KV internal urge
protection, L70 B 50: 50,000 hrs., CRI not
less than 80, CCT of 5700-6500 degree K,
THD less than 10%,,IP 65 protection
complete with all other accessories suitable
for operation on 230 V, 50 Hz supply as
required as per direction of Engg.-in-
Charge. .The luminaire should be
Replacement Warranty will be 5 years.
.Each CLEAN ROOM FITTING FOR OT ICU
Supplying and fixing of Energy
efficient surface mounted square shape 20
W LED luminaire of dimension of 225x 225
x 35 mm consists of white powder coated ,
die-cast Alluminium housing with high
quality frosted diffuser for glare-free
uniform lighting distribution with wattage
not more than 20 watt and lumen output of
489 44 1500 lumens, , CRI not less than 80,CCT Nos 320.00 1791.24 5,73,196.80
of 6000 degree K,THD less than 10%, with
electronic driver, internal surge protection
of 2.5 KV , L70 B50: 30000 hrs (2 yrs
warranty) and all other accessories
suitable for operation on 220 V to 240 V
supply as required as per direction of Engg.-
in-Charge. .The luminaire should be
Replacement Warranty will be 5 years
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2023.02.08
Head Description of Item Unit Qnty. Rate Amount
Supplying and fixing of Energy
efficient recess mounted LED luminaire with
white powder coated ,pressure die-cast Al
housing ,with high transmititivity,non-
yellowing PMMA diffuser, with wattage not
more than 20 watt and lumen output not
less than 2600 Lumen ( 130 lumens/watt )
of size 595 x595 x 70 mm , ,CRI not less
than 80,CCT of 5700-6500 degree K,THD
less than 10%, with Non integrated isolated
driver (protects the output /secondary side
from any disturbance on the input / primary
side ensuring safe operation), all other
accessories , life : 50,000 burning hours (5
years warranty) , Internal surge protection
of 3 KV suitable for operation on 230 V, 50
Hz supply as required as per direction of
Engg.-in-Charge. ( Make : Panasonic / LT
/Wipro/PHILIPS or equievalant reputed
make & model A catagory ISI marked as
approved.) The luminaire should be
Replacement Warranty will be 5 years.
SITC of energy efficient LED tube light
fittings with decorative alluminium batten
and LED tube light having power rating not
more than 20 watt and lumen output not
less than 2200 lumen complete with
electronic driver and all other accessories
with diffuser having 5 years warranty i/c
connection etc as required as per direction
of Engg.-in-Charge. The luminaire should
be Replacement Warranty will be 5 years .
SITC of Sleek LED 10 watt mirror light
fitting with extruded polycarbonate
housing,High optically efficient
diffuser,above wash basin complete with all
accessoriesetc. directly on wall, including
492 47 connection with 1.5 sq. mm FRLS PVC Nos 16.00 863.76 13,820.16
insulated, copper conductor, single core
cable and earthing etc. as required as per
direction of Engg.-in-Charge.
The luminaire should be Replacement
Warranty will be 5 years
SITC of IP 20 Non-integral flexible LED strip
light,High optically efficient diffuser,, 4000K
with 12 w/mtr @ 5Mtr pool with Driver
extra as required as per direction of Engg.-
in-Charge The luminaire should be
Replacement Warranty will be 5 years
Supplying and fixing of small focus light for
small monuments as 30W , 5700 K
494 49 required as per direction of Engg.-in-Charge Nos 20.00 3307.54 66,150.80
The luminaire should be Replacement
Warranty will be 5 years
Supplying and fixing extra conduit down rod
of 20 cm length G.I. pipe 15 mm dia, heavy
gauge including painting etc. as requiredas
required as per direction of Engg.-in-Charge
(Note : More than 5 cm length shall be
rounded to the nearest 10 cm and 5 cm or
less shall be ignored)of ISI mark as
496 51 approved.
BDBS,DB,AC DB,FLOOR PANELS,MCBS 0 0.00 0.00 0.00
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2023.02.08
Head Description of Item Unit Qnty. Rate Amount
Supplying and fixing of following mentioned
way, three pole/single pole and neutral,
sheet steel,double door MCB distribution
board, 415 volts/240 volts shall be as per
IEC 61439-3,integrated door earthing
system offering additional safety to the
user,High quality polyurethane Gasket,the
box and cover shall be fabricated to
withstand IK09,the DB should be properly
497 52 pre-treated with 7 tank process and duly 0 0.00 0.00 0.00
powder coated, phosphatized with powder
coated finish, on surface/recess, complete
with terminal blocks,with suitable size FR
PVC insulated copper conducter up to
terminal blocks, tinned copper busbar,
neutral busbar, earth bar, din bar. . as per
direction of Engg.-in-Charge. The
Distribution boards should be Replacement
Warranty will be 5 years
4 Way(8+12) Way TPN MCB DD DB
Horizontal Type as per IEC 61439-3
suitable for Flush mounting and Surface
mounting with 100A Copper Bus Bar for
each phase, with neutral Bus bar, Earth Bar
& Cable ties for cable management,
prefitted masking sheet, IP43-IK09 with
metal door(FOR LIGHT,POWER INDOOR,3-
PH,POWER LOAD) Warranty on DB is 2
Supply and fixing of 12 way DD single pole
and neutral sheet steel MCB distribution
board 250V on surface/recess complete
with tinned copper bus bar, neutral bus bar,
earth bar, din bar, detachable gland plate,
499 54 interconnections, phosphatized and powder Nos 12.00 2249.08 26,988.96
painted including earthing etc. as required
(but with out MCB/ RCCB/ Isolator) (ALL
LIGHT WITH CORRIDOOR/COMMON
AREA,EM LIGHT,UPS LOAD, EM LOAD LIGHT
LOAD,POWER LOAD )
2+4 way MCB Enclosure DB (GLAZED
500 55 door)(only each EM. CONNECTION UPS Nos 7.00 1926.94 13,488.58
8 Way(8+24) Way TPN MCB DD DB
Horizontal Type as per IEC 61439-3
suitable for Flush mounting and Surface
mounting with 100A Copper Bus Bar for
501 56 each phase, with neutral Bus bar, Earth Bar Nos 13.00 3188.36 41,448.68
& Cable ties for cable management,
prefitted masking sheet, IP43-IK09 with
metal door(FOR LIGHT,POWER INDOOR,3-
Supplying and fixing 20 amps rating, 240
volts, C series, Double poles MCB of in the
existing MCB DB complete with connections
as per direction of Engg.-in-Charge. The
MCB should be Replacement Warranty will
be 5 years .MCB should have the fault
indication system in different colour for ON,
OFF & TRIP condition or Mid trip position for
Trip conditions for easier identification of
fault.Warranty on MCB is 5 years.
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2023.02.08
Head Description of Item Unit Qnty. Rate Amount
Supplying and fixing 6 amps to 32 amps
rating, 240 volts, C series, single poles MCB
of the existing MCB DB complete with
connections as per direction of Engg.-in-
Charge. The MCB should be Replacement
503 58 Warranty will be 5 years.MCB should have Nos 388.00 155.76 60,434.88
the fault indication system in different
colour for ON, OFF & TRIP condition or Mid
trip position for Trip conditions for easier
identification of fault.Warranty on MCB is 5
Supplying and fixing 40 Amps rating, TPN,
415 volts, RCCB,300mA . in the existing
MCB DB complete with connections, testing
and commissioning etc. as required as per
direction of Engg.-in-Charge. .(4W TPN BDB
IC)AC ODU CONTROLLER). The RCCB
should be Replacement Warranty will be 5
Supplying and fixing 25Amps DP 240 volts,
RCCB,300mA in the existing MCB DB in
the existing MCB DB complete with
connections as per direction of Engg.-in-
Charge. The RCCB should be
Replacement Warranty will be 5 years
Supplying and fixing 40Amps DP 240 volts,
RCCB,300mA in the existing MCB DB in
the existing MCB DB complete with
connections as per direction of Engg.-in-
Charge. The RCCB should be Replacement
Warranty will be 5 years
Supplying and fixing 63Amps DP 240 volts,
RCCB,300mA in the existing MCB DB in the
existing MCB DB complete with connections
as per direction of Engg.-in-Charge.The
RCCB should be Replacement Warranty will
Supplying and fixing 63Amps TPN 415
volts, RCCB,300mA in the existing MCB DB
in the existing MCB DB complete with
508 63 connections as per direction of Engg.-in- Nos 14.00 3116.38 43,629.32
Charge.(for power BDB & AC ODU, 8 way
TPN BDB IC).The RCCB should be
Replacement Warranty will be 5 years
509 64 (Earthing) INSTALLATION 0 0.00 0.00 0.00
S/IT/C Of Earthing with copper earth plate
600 mm x 600mm x 6 mm thick ISI
marked including accessories and providing
masonary with cover plate having loccking
510 65 arrangement and watering pipe etc (WITH Nos 4.00 16398.46 65,593.84
charcoal and salt) as required as per
direction of Engg.-in-Charge. The entire
earthing system should be Replacement
Warranty will be 5 years
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2023.02.08
Head Description of Item Unit Qnty. Rate Amount
S/IT/C of materials and installation of pipe
earth electrode made out of 50mm dia class
B G.I. pipe of 3.0 metre long with
arrangements for fitting/ termination of
G.I. flat / wire with G. I. nut bolts &
washers including cost of burnt wood
charcoal, salt, foreign soil, water pouring
arrangements, brick masonary enclosure on
top with removable RCC cover complete
with labour for excavation of pit in all kinds
of soil & rock as required and as per
direction of Engineer-in-charge.The entire
earthing system should be Replacement
Warranty will be 5 years
Providing and fixing 4 mm dia copper wire
512 67 on surface or in recess for loop earthing as Mtr 320.00 113.28 36,249.60
required.as per direction of Engg.-in-
Providing and fixing 25mm x 5 mm copper
513 68 strip on surface or in recess for connections Mtr 35.00 1293.28 45,264.80
etc. as required as per direction of Engg.-in-
Providing and fixing 50mm x 5 mm copper
514 69 strip on surface or in recess for connections Mtr 20.00 2394.22 47,884.40
etc. as required as per direction of Engg.-in-
Supplying and making brick massonary
pedastal with extra super structure
including cement plastering etc as required
as per direction of Engg.-in-Charge.
CABLING AND END TERMINATION MAIN
Supplying of one number PVC insulated
armoured and PVC sheathed XLPE property
AL. conductor power cable of 1.1 KV grade
of following size cables as per direction of
517 72 Engg.-in-Charge. Ncessary test report & 0 0.00 0.00 0.00
Warrnaty certificate to be submitted to the
department for genuinity of product & to
avail free after sales service within warranty
period for acceptance of materials
3.5core x 240 sq mm ( TO MAIN PANEL )
3.5core x 120 sq mm ( DG PANEL1 RUNS )
Supplying of one number PVC insulated
armoured and PVC sheathed XLPE property
AL. conductor power cable of 1.1 KV grade
of following size cables as per direction of
520 75 Engg.-in-Charge. Ncessary test report & 0 0.00 0.00 0.00
Warrnaty certificate to be submitted to the
department for genuinity of product & to
avail free after sales service within warranty
period for acceptance of materials
3.5core x 95 sq mm ( FOR FDB 1F,2F,
4core x 16 sq mm (FDB LIGHT 1 RUN UPTO
523 78 4 core x 4 sq mm (for small power) Mtr 35.00 103.69 3,629.03
3.5core x 35 sq mm (To FDB LIGHT / power
524 79 BDB/UPS PANEL,separate panel for OT Mtr 35.00 257.72 9,020.33
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2023.02.08
Head Description of Item Unit Qnty. Rate Amount
Laying of PVC Insulated PVC Seated /XLPE
power cable of 1.1 kv grade size not
exceeding 25 SQ. MM direct in ground in
the trench in one horizental formation
including excavation ,sand coushing
protection covering and refilling the trench
etc as required as per direction of Engg.-in -
Laying of PVC Insulated PVC Seated /XLPE
power cable of 1.1 kv grade size exceeding
25 SQ. MM but not exceeding 120 SQ. MM
direct in ground in the trench in one
horizental formation including excavation
,sand coushing protection covering and
refilling the trench etc as required as per
direction of Engg.-in -charge.
Laying of PVC Insulated PVC Seated /XLPE
power cable of 1.1 kv grade size exceeding
120 SQ. MM but not exceeding 400 SQ. MM
direct in ground in the trench in one
horizental formation including excavation
,sand coushing protection covering and
refilling the trench etc as required as per
direction of Engg.-in -charge.
Laying of PVC Insulated PVC Seated /XLPE
power cable of 1.1 kv grade size not
529 84 exceeding 25 SQ. MM direct in ground in Mtr 45.00 49.56 2,230.20
the EXISTING PIPE etc as required as per
direction of Engg.-in -charge.
Laying of PVC Insulated PVC Seated /XLPE
power cable of 1.1 kv grade size exceeding
25 SQ. MM but not exceeding 400 SQ. MM
direct in ground in the EXISTING PIPE etc
as required as per direction of Engg.-in -
Laying of PVC Insulated PVC Seated /XLPE
power cable of 1.1 kv grade size not
531 86 exceeding 25 SQ. MM in open duct etc as Mtr 35.00 54.28 1,899.80
required as per direction of Engg.-in -
Laying of PVC Insulated PVC Seated /XLPE
power cable of 1.1 kv grade size exceeding
532 87 25 SQ. MM in open duct 400 SQ. MM direct Mtr 32.00 54.28 1,736.96
in ground in the EXISTING PIPE etc as
required as per direction of Engg.-in -
Laying of PVC Insulated PVC Seated /XLPE
power cable of 1.1 kv grade size not
533 88 exceeding 25 SQ. MM in surface with Mtr 42.00 95.58 4,014.36
shaddle and screw etc as required as per
direction of Engg.-in -charge.
Laying of PVC Insulated PVC Seated /XLPE
power cable of 1.1 kv grade size not
534 89 exceeding 120 SQ. MM From 25 SQ. MM in Mtr 32.00 151.04 4,833.28
surface with shaddle and screw etc as
required as per direction of Engg.-in -
Laying of PVC Insulated PVC Seated /XLPE
power cable of 1.1 kv grade size not
535 90 exceeding 400 SQ. MM From 120 SQ. MM Mtr 14.00 154.58 2,164.12
in surface with shaddle and screw etc as
required as per direction of Engg.-in -
Supplying and making end termination with
brass compression gland and aluminium
lugs for following mentioned size cable.as
per direction of Engg.-in-Charge.
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2023.02.08
Head Description of Item Unit Qnty. Rate Amount
Providing,fixing and laying of following dia
G.I. pipe (medium class) in ground
542 97 complete with G.I fitting incl. trenching(75 0 0.00 0.00 0.00
mm depth)and refilling as per direction of
Engg.-in-Charge.
Providing,fixing and laying of fallowing dia
HDPE pipe (medium class) in ground
544 99 complete with fitting incl. trenching(75 mm 0 0.00 0.00 0.00
depth)and refilling as per direction of Engg.-
546 101 MAIN CONTROL PANEL AT GF 0 0.00 0.00 0.00
S/I/T&Commissioning of LT indoor floor
mounted cubical type electrical main panel
(for both light and power circuit) made out
by 2mm CRCA steel sheet duly derusted &
painted by siemens gray powder cote paint
547 102 is designed as G.A drawing as per direction Set 1.00 653940.66 6,53,940.66
of Engg.-in-Charge.Warrentee period of
replacement of panel & accessories must
be 5 years & compelete test certificate must
be submitted along with panel board
including component list.
In commer-1-01 number of 800A 4P
Icu=100%Ics,0, LSIG MCCB with micro
548 103 processor based release Electrical locking 0 0.00 0.00 0.00
for normal & DG(HVAC & MEDICAL
EQUIPEMENT)(200 KVA TRANSFORMER)
In commer-2-01 number of 400A 4P
Icu=100%Ics, 0 LSIG MCCB with micro
processor based release with adjustable
549 104 overload from 36%-100% & Electrical 0 0.00 0.00 0.00
locking for normal & DG along with 01 no
of 400A 4P onload changeover switch (125
Busbar-1&2 04 numbers of 500Amps
Aluminium busbar with 1A/SQ.MM current
550 105 carring capacity. busbar duly sleeved by 0 0.00 0.00 0.00
color coated PVC sleeve & supported by
suitable size DMC insulator. (for outgoing)
Out going- 08 numbers of 63A 4P MCB
551 106 BDB P/AC,(timer panel & water supply 0 0.00 0.00 0.00
management,,FIRE,WTP,STP & GF POWER)
Out going- 10 numbers of 125A 4P Icu=50%Ics,
LSIG MCCB withTMR based release with
552 107 adjustable overload (FLOOR RAW POWER PANEL 0 0.00 0.00 0.00
,SPARE,DG PANEL OF OT COMPLEX & MCU,AC )
Out going- 3 numbers of 250A 4P
Icu=50%Ics, LSIG MCCB withTMR based
553 108 release with adjustable overload (FLOOR 0 0.00 0.00 0.00
RAW POWER PANEL ,SPARE,DG PANEL OF
OT COMPLEX & MCU,AC )
Out going- 6 numbers of 32A 4P MCB
((LIGHT SUPPLY)
Instrument- (i) 03 numbers phase
555 110 indicating lamp with toggle switch & HRC 0 0.00 0.00 0.00
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2023.02.08
Head Description of Item Unit Qnty. Rate Amount
(ii) 02 set of digital type multifunction
meter with CT for
voltage,current,frequency,PF,THD indication
with RS 485 COMPACTIVITY FOR bms data.
(iii) 4 nos of 65kA SP VSD WITH 32A SP
S/I/T&Commissioning of LT indoor floor
mounted cubical type electrical main panel
(for both light and power circuit) made out
by 2mm CRCA steel sheet duly derusted &
painted by simens grey powder cote paint is
designed as G.A drawing. (FOR ALL MAIN
CONNECTED LOAD) BUILDING LIGHT)as
per direction of Engg.-in-Charge. Warrentee
period of replacement of panel &
accessories must be 5 years & compelete
test certificate must be submitted along
with panel board including component list.
In commer- 01 no 63A 4P MCB 10kA,C
560 115 series with on/off trip indication Light load 0 0.00 0.00 0.00
for each floor.
Busbar- 04 numbers of 63Amps,50kA
Electrolytic copper busbar duly sleeved by
color coded PVC sleeve & supported by
suitable size DMC insulator.
Out going- 06 nos 32A 2P MCB 10kA,C
series UPS Light load for each area UBDB.
Instrument- (i) 03 numbers phase
563 118 indicating lamp with toggle switch & HRC 0 0.00 0.00 0.00
(ii) 01 set of 0-60Amps Ammeter with
(iii) 01 set of 0-500 voltmeter .(DIGITAL)
S/I/T&Commissioning of LT indoor floor
mounted cubical type electrical main panel
(for both light and power circuit) made out
by 2mm CRCA steel sheet duly derusted &
painted by simens grey powder cote paint is
designed as G.A drawing. (FOR ALL MAIN
567 122 CONNECTED LOAD) BUILDING Set 8.00 101782.08 8,14,256.64
POWER/AC)as per direction of Engg.-in-
Charge. Warrentee period of replacement of
panel & accessories must be 5 years &
compelete test certificate must be
submitted along with panel board including
component list.
In commer- 01 no 125A 4P MCCB 25kA,
with ROM & S. Link. (Icu=100%Ics)with
shunt trip.with axulary for BMS or
equievalant make.
Busbar- 04 numbers of 125Amps,50kA
Electrolytic copper busbar duly sleeved by
color coded PVC sleeve & supported by
suitable size DMC insulator.
Out going- 04 nos 63A 4P MCB 10kA,C
series for power BDB.
Out going- 02 nos 32A 4P MCB 10kA,C
series forExtra power BDB.
Instrument- (i) 03 numbers phase
572 127 indicating lamp with toggle switch & HRC 0 0.00 0.00 0.00
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2023.02.08
Head Description of Item Unit Qnty. Rate Amount
573 128 (ii) 01 set of MFM with CTS.(DIGITAL) 0 0.00 0.00 0.00
UPS PANEL FOR OT,ICU & OTHER
574 129 EMERGENCY(COMMON & OT COMPLEX,MCU 0 0.00 0.00 0.00
S/I/T&Commissioning of LT indoor floor
mounted cubical type electrical main panel
(for both light and power circuit) made out
by 2mm CRCA steel sheet duly derusted &
painted by simens grey powder cote paint is
designed as G.A drawing. (FOR ALL MAIN
CONNECTED LOAD) BUILDING EMERGENCY
LIGHT)as per direction of Engg.-in-Charge.
Warrentee period of replacement of panel &
accessories must be 5 years & compelete
test certificate must be submitted along
with panel board including component list.
In commer- 01 numbers of 63 Amps 4P
MCB.(Icu=50% Isc) with shunt trip &
axulary for BMS & mechnical inter locking
for one incommer source to other.
Busbar- 04 numbers of 100Amps
Electrolytic copper busbar duly sleeved by
color coded PVC sleeve & supported by
suitable size DMC insulator.
Out going- 04 nos 32A 2P MCB UPS Light
load for each floor.
Out going- 03 nos 32A 4P MCB OT/ICU
POWER/OT MACHINE OR Bed head panel
Instrument- (i) 03 numbers phase
580 135 indicating lamp with toggle switch & HRC 0 0.00 0.00 0.00
(ii) 01 set of 0-100Amps Ammeter Digital
type & CTS.(DIGITAL)
(iii) 01 set of 0-500 voltmeter Digital
NB- This panel should have proper earth by
suitable rated copper flat.
UPS SYSTEM(For OT,ICU & COMMON AREA)
Supply ,installation ,testing &
commissioning of 10KVA UPS SYSTEM
WITH suitable size battery bank, rated of
battery , IGBT based inverter system with
inbuilt isolation transformer & automatic
phase sicuency corrector of 3ph in put to 3
ph output,415V,protection for fault by
OL,UV,EF,GF,OC,Ph. Sicuency release of
equievalant model including supply of rack
585 140 inverter stand with sufficient backup upto Set 2.00 236000.00 4,72,000.00
30 minutes with all required accessories to
complete the job including all
connection.LOAD OF OT,ICU,BLOOD BANK)
as per direction of Engg.-in-Charge.
Warrentee period of all accessories &
component & system must be 2 years &
compelete test certificate must be
submitted along with ups including
component list & SLD.
CABLE TRAY /RACE WAY FOR
DISTRIBUTION OF POWER
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2023.02.08
Head Description of Item Unit Qnty. Rate Amount
HOT DIPP GALVANIZED(GC) AS PER EN-ISO-
1461 , CARBON STEEL WIRE MESH CABLE
TRAYS with internal dimensions of size
54mm(H) x 200mm(W), of or equievalant
reputed make & model A catogory, ISI
marked as approved .The Load bearing
capacity of the Cable Trays should be
587 142 minimum of 104.8Kg/meter at the span of mtrs 45.00 702.10 31,594.50
1.5Meter as per UL specifications.(With all
accessories,bend,cover,supporter)WITH
REQUIRED SIZED JUNCTION BOX ,COVER
CONNECTOR as required as per direction of
Engg.-in-Charge. Warrentee period oftray
must be 5 years & compelete test certificate
must be submitted .
HOT DIPP GALVANIZED(GC) AS PER EN-ISO-
1461 , CARBON STEEL WIRE MESH CABLE
TRAYS with internal dimensions of size
54mm(H) x 300mm(W), of .The Load
bearing capacity of the Cable Trays should
be minimum of 104.8Kg/meter at the span
588 143 of 1.5Meter as per UL specifications.(With mtrs 24.00 814.20 19,540.80
all accessories,bend,cover,supporter)WITH
REQUIRED SIZED JUNCTION BOX ,COVER
CONNECTOR as required as per direction of
Engg.-in-Charge. Warrentee period oftray
must be 5 years & compelete test certificate
must be submitted .
HOT DIPP GALVANIZED(GC) AS PER EN-ISO-
1461 , CARBON STEEL WIRE MESH CABLE
TRAYS with internal dimensions of size
54mm(H) x 400mm(W), of.The Load
bearing capacity of the Cable Trays should
be minimum of 104.8Kg/meter at the span
589 144 of 1.5Meter as per UL specifications.(With mtrs 45.00 1077.34 48,480.30
all accessories,bend,cover,supporter)WITH
REQUIRED SIZED JUNCTION BOX ,COVER
CONNECTOR as required as per direction of
Engg.-in-Charge. Warrentee period oftray
must be 5 years & compelete test certificate
must be submitted .
GALVANIZED(GC) AS PER EN-ISO-1461 ,
FLOOR RACE WAY WITH JUNCTION with
internal dimensions of size 38mm(H) x
225mm(W), of reputed make ISI
marked as approved .(With all accessories,
bend,cover,supporter) WITH REQUIRED
SIZED JUNCTION BOX ,COVER CONNECTOR
as required as per direction of Engg.-in-
Charge.(3 COMPARTMENT TOTAL 54 MM
HEIGHT,COST WITHOUT GST,WITH LESS
DISCOUNT(REPUTED FACTORY MADE ISI
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2023.02.08
Head Description of Item Unit Qnty. Rate Amount
Supply, Transportation, erection, testing
and commissioning of 3 Phase, 415V, 50Hz,
water cooled multi cylinder diesel generator
set with alternator of 250KVA out put
contineous rating directly coupled Engine
and Alternator with guard and mounted on
a common base plate of Robust
construction and complete with AMF panel
having IP-52 protection, Acoustic Enclosure
as per CPCB norms , sound absorbing
material, to restrict sound level up to 75 dB
up to 1 mtr distance and as per CPCB
norms etc as per following specifications
mentioned below.
A. Alternator as per direction of Engg.-in-
Charge. Warrentee period of panel must be
5 years & compelete test certificate must be
submitted along with DG set including
component list & smoke exhaust system
drawing,certified ISO 8528
ALTERNATOR:The alternator of the output
rating shall be 3 Phase, 415V, 50Hz, Ac ,
0.8 P.F. lagging at 1500 RPM. The
594 149 alternator is self excited, self regulated, and 0 0.00 0.00 0.00
shall confirm to IS: 13364 of 1992 with
regulation of +5% from no load to full load.
degree of protections shall be IP21.
ENGINE: Diesel Engine . Diesel Engine
start, developing suitable BHP output at
1500 RPM with mechanical / electronic
governing so as to enable the alternator to
give 250KVA continuous output at 0.8 P.F.
lagging at NTP conditions. The diesel engine
shall be capable of providing 10% O/L for 1
Hr for every 11 Hrs of continuous running
595 150 at full load. The engine with 1st filling of oil 0 0.00 0.00 0.00
and Diesel etc.
01. Exhaust pipe of required size and length
with insulation or clading.
02. Diesel tank suitable for 8 to 10 Hours
running capacity.
03. Residential Silencer.
04. SMF Batteries with leads as per the
Manufacturer standards
AMF PANEL: Cubical, Compartmentalized,
AMF Panel Baord with all Power & Control
Contractors, Switches, Meters and other
accessories, Internal Wiring, connection,
inter-connection etc. for Trouble Free
smooth function for250KVA DG Set
complete with Battery Charger & leads as
BASE PLATE: Common Base Plate of
required size for mounting of Engine
Alternator Set fabricated from MS Channerl
and vibration damping arrangement with
cushy foor mounting including paintng etc.
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2023.02.08
Head Description of Item Unit Qnty. Rate Amount
FOUNDATION: Suitable size Cement
Concrete (1:2:4) foundation duly plastered
and finished with neat coat Cement as
required along with smoke exhaust system
piping including base frame of structure &
lightening protection system. *It also
598 153 includes 2 nos GI pipe earthing for body Set 1.00 2787819.62 27,87,819.62
and 2 nos copper plate earthing for neutral,
control cable of 15mtr 2.5sqmm 6core ,
civil foundation work.
(The Manufacturing of DG set shall not in
any case be more than six months old from
the date of award of work)
599 154 20 PASSENGER HOSPITAL LIFT 0 0.00 0.00 0.00
Design Supply, Installation, Testing &
Commissioning and putting into operation
with compelete inspection by concerned
electrical inspector, Director Factory and
Boilers, Odisha with proper testing
certificate and final testing of Automatic
Lift complete with all standard equipments
accessories and control equipments as per
Manufacturer's Design with lift control panel
including BMS facility and as per BIS and
fulfilling following requirements.It includes
600 155 supply,laying of power cable and fixing of 0 0.00 0.00 0.00
glands,lugs etc.( Machine room less,
Gearless Type).Design and as per CPWD
/OPWD specification (Part - III Lifts) 1981
with valid lisence for installation and
fulfilling following requirements on turnkey
basis as per direction of Engg.-in-Charge.
LIFT OF machineroom less typeWarrentee
period of accessories & system must be 5
years & compelete test certificate must be
submitted along with Lift including
component list .
601 156 Type: HOSPITAL PASSENGER LIFT 0 0.00 0.00 0.00
603 158 Speed: 1.0 Meter Per Second. 0 0.00 0.00 0.00
Control: Variable voltage with variable
Operation: Microsprocessor based simplex
605 160 collective selective with / without Lift 0 0.00 0.00 0.00
606 161 Total Rise: About 8 Meters. 0 0.00 0.00 0.00
607 162 Landings: For All on same side. 0 0.00 0.00 0.00
608 163 Floors Served: GF,1F,2F,3F,4F 0 0.00 0.00 0.00
Signals: Digital Car Position Indicator, Car
609 164 Travel direction Indicator in Car & at all 0 0.00 0.00 0.00
Lift Shaft Size: About as 20 passenger lift
standard, finished with Plaster.
611 166 Lift Car Size: About lift standard. 0 0.00 0.00 0.00
Car Entrance: Clear Opening lift standard
high Protected with Car Door.
Landing Entrance: Clear Opening lift
standard high Protected with Landing Door.
Car Door: Stainless with front glass to
614 169 transparent Two Panel Center opening 0 0.00 0.00 0.00
flush type.outer visible.
Landing Door: Mild Steel Two Panel Center
opening flush type P.
Door Operation: Automatic Electric Power
operated Door with in infrared protection.
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2023.02.08
Head Description of Item Unit Qnty. Rate Amount
Car Interior: Stainless Steel Panel with Hair
line finish on all sides.
Car Floor: Hard Wood covered with PVC /
Car Ceiling & Lighting: Fluorescent Lighting
Concealed by suspended false ceiling with
619 174 plain acrylic diffiuser. The frame of 0 0.00 0.00 0.00
suspended false ceiling shall be of powder
coated Aluminum.
Car Ventilation: Pressure Fan with anodized
Aluminum Grill.
Emergencing Lighting in Car: Battery
621 176 operated Emergencing Lighting in the Lift 0 0.00 0.00 0.00
Intercom System: Battery operated
622 177 intercom system in Lift Car and Control 0 0.00 0.00 0.00
Emergencing Alarm: Battery operated
623 178 Alarm Bell System in Lift Car and Control 0 0.00 0.00 0.00
Position of Machine Room: Directly above
the Lift Shaft.
Electric Power Supply: AC 415 Volt 3 Phase
50 Hz terminated in control room along
625 180 with control panel with facility of BMS 0 0.00 0.00 0.00
connectivity system .The scope of lift
control panel is inclussive with lift vender
626 181 OTHER SPECIAL PROVISIONS 0 0.00 0.00 0.00
628 183 • AUTOMATICE RESCUE DEVICE (ARD) 0 0.00 0.00 0.00
• EMERGENCY LIGHT AND BATARY
OPERATED ALARAM BELL
• DOT MATRICKX SEVEN SIGMENT DIGITAL
POSITION INDICATORS
631 186 • FIRE RATED DOOR FOR 1 HOUR 0 0.00 0.00 0.00
• 3 WAY INTER COM/PRESS AND SPEAK
BUTTON WITH HAND SET
633 188 • FLOOR ANNUNCIATOR WITH MUSIC 0 0.00 0.00 0.00
635 190 • OVER LOAD WARNING INDICATOR 0 0.00 0.00 0.00
637 192 • FREE SERVICE FOR 5 YEARS 0 0.00 0.00 0.00
• FULL CAR HEIGH CAR FIXTURE ARRIVAL
• PROVISION FOR CC CEMARA WITH
Fire Man Switch: Fire Man Switch at Main
Landing Terminal.
Supplying, Erection, Fixing, connection &
testing of LED BOUNDRY WALL Light of
elegant look 35 W LED street light having
die cast aluminium housing with toughened
glass having lumen efficacy of 110 lm/w
or more (As per LM 79 report of third party
644 199 NABL lab) ,IP 65 protection or more , LED Sets 24.00 3779.54 90,708.96
street light model will be vide having
warrantied for a period of 5 years . The
luminaire should be supplied along with
bracket maintenance free for inspection as
required as per direction of Engg.-in-
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2023.02.08
Head Description of Item Unit Qnty. Rate Amount
Supplying, Erection, Fixing, connection &
testing of Panasonic 40 LED GATE Light of
or equievalant reputed make A catagory
ISI marked as approved maintenance free
645 200 having 2 years warranty G.I P ipe with Sets 3.20 11952.22 38,247.10
braket including MCB box & including with
foundation as per the Drawing for
inspection as required & as per direction of
Engg.-in-Charge.
Supply of materials and installation of pipe
earth electrode made out of 50mm dia class
B G.I. pipe of 3.0 metre long with
arrangements for fitting/ termination of
G.I. flat / wire with G. I. nut bolts &
washers including cost of burnt wood
charcoal, salt, foreign soil, water pouring
arrangements, brick masonary enclosure on
top with removable RCC cover complete
with labour for excavation of pit in all kinds
of soil & rock as required and as per
direction of Engineer-in-charge.The entire
earthing system should be Replacement
Warranty will be 5 years
Providing and fixing 4 mm dia copper wire
on surface or in recess for loop earthing as
required as per direction of Engg.-in-
Providing and fixing 25mm x 5 mm copper
strip on surface or in recess for connections
etc. as required as per direction of Engg.-in-
S/I/T&Commissioning of LT OUT DOOR
FLOOR mounted cubical type MCB
ENCLOSURE made out by 2mm CRCA steel
sheet duly derusted & pented by simens
gray powder cote paint is designed as G.A
drawing. (FOR USE) with 20A TPN MCB 01
NO as per direction of Engg.-in-Charge.
Ncessary test report & Warrnaty certificate
to be submitted to the department for
genuinity of product & to avail free after
sales service within warranty period 2 years
of acceptance of materials
Supplying,laying of 3cx2.5 sq.mm copper
flexible cable with insulated cover of
reputed make,ISI marked with all other
concerned materials as per direction of
650 205 Engg.-in-Charge. Ncessary test report & mtrs 195.20 125.08 24,415.62
Warrnaty certificate to be submitted to the
department for genuinity of product & to
avail free after sales service within warranty
period for acceptance of materials
651 206 LIGHTENING CONDUCTOR 0 0.00 0.00 0.00
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2023.02.08
Head Description of Item Unit Qnty. Rate Amount
AIR TERMINAL & ACCESSORRIES
LIGHTNING ARRESTER+ MAST:
Providing and fixing of lightning conductor
finial made of 25 mm dia 300 mm long, G.I
tube,having single prong at top, with 85
652 207 mm dia 3 mm thick G.I base plate including NOS 20.00 454.30 9,086.00
holes etc complete as required with as per
direction of Engg.-in-Charge.(RATE
REFERING OSR 2018 SOR NO-4.2) .The
entire LA system should be Replacement
Warranty will be 5 years
Reveting, sweating and soldering of copper
/ G.I. tape ( with another copper / G.I.
tape, base of the finial or any other metallic
653 208 object) as required .as per direction of mtrs 55.00 166.38 9,150.90
Engg.-in-Charge. (RATE REFERING OSR
2018 SOR NO-4.4) The entire LA system
should be Replacement Warranty will be 5
Providing and fixing of G.I. tape 20 mm x 3
mm thick on parapet or surface of wall for
lightning conductor complete as required.
(For horizontal run) as per direction of
Engg.-in-Charge.(RATE REFERING OSR
2018 SOR NO-4.7) The entire LA system
should be Replacement Warranty will be 5
Providing and fixing of G.I. tape 20 mm x 3
mm thick on parapet or surface of wall for
lightning conductor complete as required.
655 210 (For virtical run) as per direction of Engg.- mtrs 55.00 114.46 6,295.30
in-Charge. (RATE REFERING OSR 2018 SOR
NO-4.8) The entire LA system should be
Replacement Warranty will be 5 years
Providing and fixing of testing joint, made
of 20 mm x 3 mm thick G.I. strip, 125 long
with 4 nos of G.I. bolts, check nuts and
spring washer etc complete as required as
per direction of Engg.-in-Charge. (RATE
REFERING OSR 2018 SOR NO-4.12) The
entire LA system should be Replacement
Warranty will be 5 years
Providing and laying of G.I. tape 32 mm x 6
mm from earth electrode directly in ground
as required as per direction of Engg.-in-
Charge. .(RATE REFERING OSR 2018 SOR
NO-4.14) The entire LA system should be
Replacement Warranty will be 5 years
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2023.02.08
Head Description of Item Unit Qnty. Rate Amount
Maintenance free Safe Earthing Electrodes
with ISI G.I. pipe dia 75mm as Secondary
electrode with wall thickness of 2.6 mm and
the Primary Earthing Electrode will be
50mm X 6mm X 1no M.S. hot dipped
galvanized strip filled with a highly
conductive & non-corrosive compound in
between the Primary Earthing and the
secondary Earthing, the Surface Area in will
be 7,06,500sqmm for 3mtrs length and
Cross Sectional Primary conducting area is
300 sq.mm. An Solid G.I. Base plat seals
the unit at the bottom. as per direction of
Engg.-in-Charge. (MES-GFC ground Filling
compound will be provided in 25 kgs
Bags.)(MES-GFC ground Filling compound
will be provided in 25 kgs Bags.)(2 bags
required for each earthing electrode.)(FOR
lightening protection & Building
Electrification).The entire earthing system
should be Replacement Warranty will be 5
Supply,installation, testing and
660 215 commissioning of 4 P&T & 14 Extensions Set 2.00 15930.00 31,860.00
Hybrid EPABX System
Supply,installation, testing and
commissioning of RJ11 Modular Complete
in concealed manner including termination
Supply & Laying of 2 Core 0.5mm
telephone cable using Rigid PVC Pipe in
concealed manner per running metre of
Supply,installation, testing and
663 218 commissioning of Electronic Push Button Nos 16.00 826.00 13,216.00
Telephone with Caller ID
Supply,installation, testing and
commissioning of GSM FCT Terminal
Supply,installation, testing and
665 220 commissioning of Lightening Protector for Nos 2.00 1357.00 2,714.00
Supply,installation, testing and
666 221 commissioning of 12v 7 Ah Battery Nos 2.00 1475.00 2,950.00
including termination
Supply,installation, testing and
commissioning of RJ45 Modular Complete
in concealed manner including termination
Supply & Laying of Cat 6 cable using Rigid
669 224 PVC Pipe in concealed manner per running Rmt 728.00 82.60 60,132.80
metre of cable laid.
Supply,installation, testing and
commissioning of Patch Panel, 6U Rack,
Cable Manager, Cooling Fan x 2 Nos.,
Earthing Kit, Power Manager
Supply,installation, testing and
commissionining of 1 Mtr Patch Cord
Supply,installation, testing and
commissionining of 3 Mtr Patch Cord
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2023.02.08
Head Description of Item Unit Qnty. Rate Amount
Supply,installation, testing and
674 229 commissioning of 10 Channel DVR with 2 Set 2.00 11800.00 23,600.00
Supply,installation, testing and
675 230 commissioning of 4 MP Dome / Bullet Nos 16.00 8850.00 1,41,600.00
Camera with 25 Mtrs IR Range
Supply & Laying of RG59+ 3 Core cable
676 231 using Rigid PVC Pipe in concealed manner Rmt 515.00 82.60 42,539.00
per running metre of cable laid.
Supply,installation, testing and
commissioning of BNC & DC Connectors
Supply,installation, testing and
678 233 commissionining of 4 TB CCTV Surveillance Nos 2.00 11210.00 22,420.00
Supply,installation, testing and
commissionining of 10 Amps Power Supply
Supply,installation, testing and
commissioning of Smart 32" LED Monitor
Supply,installation, testing and
commissioning of 10 Mtrs HDMI Cable
Supply,installation, testing and
commissioning of Bird Canopy
Supply,installation, testing and
commissioning of Wireless Mouse
684 239 Sub-Total of Electrical Works 0 0.00 0.00 2,13,63,240.76
1 Supply of A,C with indoor and outdoor unit
687 2 1.5 TR high wall split A.C 3Star Each 45.00 49560.00 22,30,200.00
688 3 REFRIGRANT PIPING 0 0.00 0.00 0.00
4 Supply,installation of hard/soft copper
refregrant piping,complete with fitting of
bends and other nesessary material to
complete the job.
690 5 1 TR to 3 TR high wall split A.C mtr 45.00 988.84 44,497.80
7 Supply,installation & fabrication of MS
base frame for both indoor and outdoor unit
and other nesessary material to complete
693 8 1 TR to 3 TR high wall split A.C no 45.00 1984.76 89,314.20
10 Supply,installation & fabrication of
Insulated drain water piping from indoor to
695 nearestdrain point separate to all and 0 0.00 0.00 0.00
other nesessary material to complete the
697 12 SHEET METAL WORKS 0 0.00 0.00 0.00
14 Supply,laying of control cable and other
nesessary material to complete the job.
700 15 For 1 TR to3 TR high wall split A.C no 58.00 145.14 8,418.12
701 16 Sub-Total of HVAC Works 0 0.00 0.00 23,80,448.22
702 0 Firefighting Works 0 0.00 0.00 0.00
703 1 PUMPS AND APPURTENANCES 0 0.00 0.00 0.00
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2023.02.08
Head Description of Item Unit Qnty. Rate Amount
Supply , installation, testing &
commissioning of Motor driven end suction
Back pullout type Centrifugal pump
delivering 2280 LPM at 56 Mtr head with CI
casing bronze impeller and SS shaft with
mechanical seal (for Wet riser & Sprinkler
system) with 2 pole TEFC motor suitable
for operation on 415 V ,3 ph, 50 C/s AC
supply and complying to TAC norms
including providing base frame
coupling,coupling guard as per direction of
Engineer-in-charge
Supply , installation, testing &
commissioning of Diesel Engine driven end
suction Back pullout type Centrifugal pump
having 2280 LPM at 56 Mtr head with CI
casing bronze impeller and SS shaft with
mechanical seal and suitable diesel engine
complying to TAC norms along with all
accessories including control wiring
between panel & DG set and fuel storage
tank including providing base frame
coupling,coupling guard as per direction of
Engineer-in-charge..
Supply , installation, testing &
commissioning of Motor driven end suction
Back pullout type Centrifugal Jocky pump
delivering 180 LPM at 60Mtr head with CI
casing bronze impeller , SS shaft with
mechanical seal and 2 pole TEFC electric
motor suitable for operation on 415 V ,3
ph, 50 C/s AC supply including providing
base frame coupling,coupling guaaard as
per direction of Engineer-in-charge.
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2023.02.08
Head Description of Item Unit Qnty. Rate Amount
Supply,Installation,Testing &
Commissioning of dust and vermin proof
front operated compartmentalised cubicle
type control panel suitable for operation on
415 Volt, 3 ph, 50 c/s power supply with
630 Amp TPN Aluminium busbar fabricated
out of 2 mm thick CRCA sheet duly powder
coated after treatment in 7 tank process
with top entry cable gland plate including
interconnections, earth bus as required
comprising of :
INCOMING: One(1)- 400 Amp 36 KA TP
MCCB with microprocessor release, O/L, S/C
and E/f release, Voltmeter with s/s,
Ammeter with S/s, 3 Nos 400/5 metering
CTs of Class 1.0, ON/ OFF indicating lamps,
707 5 3 Nos Phase indicating lamp and 4P 6A 0 0.00 0.00 0.00
OUTGOING: a)Three(3)-250 Amp TP MCCB,
with star delta starter suitable for motor
with O/L release, ON/ OFF push button, ON/
OFF indicating lamp, 3 Nos CTs metering
CTs 250/5, Ammeter S/S.
b) 2 No (Outgoing) – 63 Amp TP MCCB,
with star delta starter suitable for motor
with O/L release, ON/ OFF push button, ON/
OFF indicating lamp,3nos 50/5
c) 1 Set – Relay, Auto/ Manual Selector
Switch, Battery Charger, Annunciation
Panel, Control wiring of pressure switches,
flow switches and starters etc as required
for auto and manual operation of Jockey
Supply, installation, testing and
commissioning of Floor/Wall mounted
sectionalised, front operated top entry dust
and vermin proof M.V.Panel Boards suitable
for operation at 415V, 3 phase, 4 wire,
50Hz distribution system fabricated out of
2.0 mm thick CRCA sheet, insulated busbar
with heat shrinkable PVC sleeve, base
frame, complete with all accessories
including interconnections, earth bus etc as
required comprising of. One
(1)- 63 Amp, 10 KA,TPN (Class-C) MCB
with 3 Nos Phase indicating lamps with
control fuse/ MCB, Digital Voltmeter with
selector switch. DOL starter with O/L and
Single Phasing Preventor suitable for
motor. ON/OFF indication lamps, Auto
manual switch and ON/OFF push button.
One (1) - Set of Auxilliary relay for
710 8 automatic operation through pressure 0 0.00 0.00 0.00
Supply & Laying of XLPE power cable of 1.1
KV grade of following size on Cable
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2023.02.08
Head Description of Item Unit Qnty. Rate Amount
Supplying instalaltion hot dip galvanized
ladder type cable tray of following size
716 14 including installation along wall/ suspended 0 0.00 0.00 0.00
from ceiling with brackets/ threaded
suspenders including bends etc as required.
150 mm (W) X 50 mm (H) with 1.2 mm
450 mm (W) X 50 mm (H) with 1.6 mm
Laying & fixing of one no. PVC insulated
and PVC sheathed/XLPE power cable of 1.1
KV grade of following size on Cable Tray as
722 20 Above 35 Sqmm and upto 95 sqmm Mtr 111.00 87.32 9,692.52
723 21 End Termination 0 0.00 0.00 0.00
Supply & Making end Termination with
brass compression gland and aluminium
724 22 lugs for PVC insulated and PVC sheathed 0 0.00 0.00 0.00
cable of 1.1 kv grade (without cost of
Supply,Installation,Testing &
Commissioning of 'C' Class heavy duty MS
pipe (as per IS 1239 upto 150 mm NB and
IS 3589 for above 150 mm 6.33mm thick)
with flanges and fitting such as bends, tees,
reducers, rubber insertions and galvanized
nuts and bolts of following size on surface
728 26 along wall / shaft with MS bracket, 0 0.00 0.00 0.00
suspended from ceiling/ beam with
suspenders duly painted with two coats of
primer and finished with enamel paint of
approved colour laid through pipe or in
trench after wrapping with hassen cloth
after applying coal tar primer as required as
per direction of Engineer-in- charge.
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2023.02.08
Head Description of Item Unit Qnty. Rate Amount
Supply,Testing & Commissioning of 'C'
Class heavy duty MS pipe (as per IS 1239
upto 150 mm NB and IS 3589 for above
150 mm 6mm thick) with flanges and
fitting such as bends, tees, reducers, rubber
insertions and galvanized nuts and bolts of
following size including laying in ground
after excavation and refilling of trench
along with providing 4mm thick pipecoat for
underground pipe after applying wrapping
coating primer as required as per direction
of Engineer-in- charge.
Providing, fixing, testing and commissioning
of following size manually operated hand
lever type cast iron double flanged slim seal
wafer type Butterfly valves with EPDM iron
disc as per IS-13095 having pressure
740 38 ratting PN -1.60 including fixing the same 0 0.00 0.00 0.00
with supply of required jointing materials
like rubber insertion, MS nuts & bolts, paint
etc. and testing the joints with required
water pressure etc. all complete as per
specification & direction of E.I.C.
Providing, fitting & fixing of following size
cast iron double flanged type dual plate Non
return Valve as per IS- 5312 (Part 1): 2004
with ISI mark of pressure ratting PN-1.60
including fixing the same with supply of
745 43 required jointing materials like flanges, 0 0.00 0.00 0.00
rubber insertion, MS nuts & bolts, paint etc.
and testing the joints with required water
pressure etc. all complete as per
specification & direction of Engineer-in-
Supply,Installation,Testing &
Commissioning of orifice plate made of
6mm thick stainless steel with orifice of
750 48 required size in between flane and landing Nos 7.00 10158.62 71,110.34
valve of external and internal hydrant to
reduce pressure to working pressure of 3.5
Kg/ sq cm complete as required.
Supply,Installation,Testing &
Commissioning of Pressure gauge of 0-16
751 49 Kgf/sq.cm. range with cut-off bronze ball Nos 3.00 2370.62 7,111.86
valves of suitable size with all accessories
as per direction of Engineer-in-charge.
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2023.02.08
Head Description of Item Unit Qnty. Rate Amount
Supply,Installation,Testing &
Commissioning of Pressure Switch with cut-
off bronze ball valves with integral strainer
& flare nut (mixed ends) of suitable size
with all accessories as per direction of
Engineer-in-charge.
Supply,Installation,Testing &
Commissioning of stainless steel strainer
753 51 fabricated out of 1.6 mm thick stainless 0 0.00 0.00 0.00
steel sheet Y Stainer with 3 mm dia hloes
with stainless steel flange as required.
Supply,Installation,Testing &
Commissioning of Air vessel made of
250mm dia, 8mm thick MS sheet, 1200 mm
in height with air release valve on top and
755 53 flanged connection to riser, drain Nos 2.00 30820.42 61,640.84
arrangement with 25 mm dia Gun metal
wheel valve, with required accessories,
pressure gauge and painting with synthetic
enamel paint as required.
Supply,Installation,Testing &
Commissioning of 150 NB C.I. PRV with
matching flanges as per direction of
Engineer-in-charge.
Supply,Installation,Testing &
Commissioning of 150NB Alarm Valve ,
Water Motor Gong Retarded Chamber,
Flange to:- ANSI B 16. 1 Class 125/ANSI
757 55 B16.5 Class 100, All Components are UL Set 1.00 49530.50 49,530.50
Listed/FM Approved , Rated pressure 17.50
kg/cm2, Test pressure 500PSI confirming to
IS :15105:2002 with ISI mark as per
direction of Engineer-in-charge.
758 56 WET RISER SYSTEM 0 0.00 0.00 0.00
Supply,Installation,Testing &
Commissioning of Stainless steel Hydrant
Valve / Landing valve, of 63 mm NB size,
type-A, single headed , oblique type, as per
IS :5290/93 and as per direction of
Engineer-in-charge.
Supply,Installation,Testing &
Commissioning of SS short branch pipe
760 58 with 63 mm male inlet and 19 mm outlet Nos 10.00 4751.86 47,518.60
nozzle, as per IS:903 and as per direction
of Engineer-in-charge.
Supply,Installation,Testing &
Commissioning of 63 mm NB and 15meter
long RRL Fire Hose fitted with 63mm
761 59 intstantaneous stainless steel male & Nos 10.00 8343.78 83,437.80
female SS coupling, complete by GI wire
binding for Internal Hydrant as per direction
of Engineer-in-charge.
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2023.02.08
Head Description of Item Unit Qnty. Rate Amount
Providing supply & fixing of MS Hose Box
for of suitable size(750X600X250mm) to
accomodate 2 nos. of 15/ 1 no of 30 mtr
long fire hose and a branch pipe, wall
mounted type as per direction of Engineer-
Supply,Installation,Testing &
Commissioning of Swinging pattern wall
fixing first aid hose reel made from MS
sheet and waterways and moving parts with
763 61 rubber hose of 20 mm dia. and 30 mtrs. Nos 10.00 11477.86 1,14,778.60
long with ABS(Plastic) shut-off nozzle as
per IS: 444/IS: 12585 Type-I., complete
with all accessories as per direction of
Engineer-in-charge.
Providing, fitting and fixing of C.I. 25 MM
single air relief valve with stop cock
confirming to IS:14845/2000 with ISI mark
for water works purpose including fixing the
same with hydrant riser including testing &
commissioning the system etc. all complete
as per approved specification & direction of
Engineer-in-charge.
Providing, fitting & fixing of 4-Way GM fire
brigade connection consisting of 63 mm dia
instantaneous type male couplings with
built-in check valves, 150mm dia flanged
765 63 outlet complete with bolts, nuts and rubber Nos 1.00 14916.38 14,916.38
insertions confirming to IS:904 with ISI
mark including testing & commissioning the
system etc. all complete as per apporoved
specification & direction of EIC.
766 64 SPRINKLER SYSTEM 0 0.00 0.00 0.00
Supply,Installation,Testing &
Commissioning of Pendent/ Upright type
Standrd Sprinkler with QB of 68 /79 deg. C
767 65 temperature rating and 1/2" end connection Nos 209.00 507.40 1,06,046.60
confirming to IS: 15105 with ISI mark for
all floors etc. all complete as per direction
of Engineer-in-charge.
Providing, fitting & fixing of following size
cast iron double flanged Y type strainer with
SS 304 perforated screen confirming to IS
1538 with ISI mark of pressure rating PN-
1.60 including fixing the same with supply
of required jointing materials like rubber
insertion, MS nuts & bolts, paint etc. and
testing the joints with required water
pressure & all complete as per specification
& direction of E.I.C.
Supply,Installation,Testing &
Commissioning of Cast Iron Ball Valve with
770 68 teflon seals, Stainless steel Ball & Stem, MS Set 3.00 800.04 2,400.12
Lever with PVC Coating As Per IS: 9890 ISI
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2023.02.08
Head Description of Item Unit Qnty. Rate Amount
Providing, fitting and fixing of C.I. single Air
relief valve with stop cock confirming to
IS:14845/2000 with ISI mark for water
works purpose including fixing the same
with hydrant riser including testing &
commissioning the system etc. all complete
as per approved specification & direction of
Providing & fixing of Water Flow Switch
switable for pipe 100 mm Diameter with all
accessories for all floors etc. all complete as
per direction of Engineer-in-charge.
Providing & fixing of 25 mm size Gunmetal
Pressure Release Valve with isolation valve
773 71 and all accessories conforming to Nos 1.00 3097.50 3,097.50
IS3233:1965 as per direction of Engineer-in-
Providing, laying, testing & commissioning
of Flexible Sprinkler Hose Corrugated
Unbraided type of length 1mtr for Fire
Sprinklers, with 1'' Inlet Nipple BSPT,1/2"
Outlet Reducer BSPT,0.7 m Square
Supports Bar & Brackets(UL Listed) with all
complete accessories as per direction of
Engineer-in-charge.
775 73 EXTINGUISHER SYSTEM 0 0.00 0.00 0.00
Portable Fire Extinguisher System
Supplying, installation, testing and
commissioning of CO2 type Fire
Extinguisher 4.5 kg capacity confirming to
IS: 2878 made from ISI marked seamless
cylinder confirming to IS: 7285, fitted with
ISI marked controlled valve confirming to
IS: 3224, high pressure 1mtr discharge
hose & horn complete with initial gas
charged with carrying handle & wall
mounting bracket as per direction of
Engineer-in-charge.
Supplying, installation, testing and
commissioning of ABC type fire
extinguishers of 6 kg capacity including cost
of all material & labour etc complete.
Supplying, installation, testing and
commissioning of Mechanical Foam type 9
litre capacity Fire Extinguisher, ISI marked,
IS: 10204, containing 540 ml AFFF liquid
ISI marked, IS: 4989 Part II and a
polyurethane coated CO2 Gas Cartridge, ISI
marked, IS: 4947 complete with gunmetal
union cap, nylon hose with plastic foam
making branch and wall mounting bracket
as per direction of Engineer-in-charge.
779 77 AUTOMATIC FIRE ALARMING SYSTEM 0 0.00 0.00 0.00
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2023.02.08
Head Description of Item Unit Qnty. Rate Amount
Supplying installation testing and
commissioning of Microprocessor based
Addressable Fire Alarm Control Panel (2
loop ) suitable for serving the followingg
detectors & Devices in maximum with LCD
display, complete withb) 2 Nos 12 Volt 40
Ah SMF battery, Battery backup and also
provision for 2 Nos potential free Normally
open contact per loop to be used for
interlocking of AHUs in the event of fire
with provision for interface along PA
Controller including call station in built
suitable for 240 watt amplifier as per
direction of Engineer-incharge.
Supply, Installation, Testing &
commissioning of Analog Addressable
smoke cum heat detector or heat detector
sensor with status indicator .
Supply, Installation, Testing &
commissioning of Addressable Manual Call
Point soft addressable type with in built
fault isolator as required
Supply, Installation, Testing &
783 81 commissioning of Response Indicator Nos 70.00 356.36 24,945.20
complete as required.
Supply, Installation, Testing &
commissioning ofAddressable Loop Powered
Hooter cum Strobe (sound output of
minimum 90db) cum strobe (strength of
light 10cd) complete with inbuilt isolator as
Supply & Fixing of 2 core 1.5 sq.mm, multi
strand, copper conductor, FRLS (Fire
785 83 Retardent Low Smoke)-PVC insulated GI Mtr. 2500.00 156.94 3,92,350.00
Screened Armoured cable with saddle and
required accessories.& Power Cable.
Supply, Installation, Testing &
commissioning of Addressable transponder/
Monitor cum Control Modules (1 input + 1
output) for monitoring flow switches/Fire
exit doors etc complete as required.
Supply ,Installation ,Testing &
787 85 Commissioning of Output Control Relay Nos 1.00 48795.36 48,795.36
Supplying and fixing metal box of following
sizes (nominal size) on surface or in recess
with suitable size of phenolic laminated,
sheet cover in front including painting etc.
as required. 100 mm X 100 mm X 60 mm
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2023.02.08
Head Description of Item Unit Qnty. Rate Amount
Supplying, installation, testing &
commissioning of 6 zone,voice alarm
controller with USB, MP3 player (including 6
790 88 zone button paging station) with seamless Nos. 1.00 118876.74 1,18,876.74
integration facility with main fire alarm
panel for voice evacuation complete as
Supplying, installation, testing &
commissioning of digital audio amplifier
250 Watt, 25V rms operating at 240 Volt
AC Supply complete as required.
Supplying, installation, testing &
commissioning of ceiling/wall mounted loud
speaker, 3/15 Watt in ABS enclosure
complete as required
Supplying and drawing of speaker cable
793 91 Single pair, 2-core, 1.5 sqmm in existing Mtr. 1655.00 76.70 1,26,938.50
794 92 Sub-Total of Firefighting Works 0 0.00 0.00 1,31,40,970.88
High Oxygen Tube, High Vaccum tube and
797 3 High Oxygen tube- 0 0.00 0.00 0.00
809 15 Sub-Total of Other Works 0 0.00 0.00 16,69,501.76
810 Grand Total 16,54,64,688.43
810 Grand Total 16,54,64,688.43
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2023.02.08
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.06 MB
3a GCC PMC Contracting Works.pdf
Tender Document
3b SCC.pdf
Tender Document
5 NIT.pdf
Tender Document
8 Milestone.pdf
Tender Document
13 List of Approved Makes NHM Project Odisha.pdf
Tender Document
14 Scope of Work.pdf
Tender Document
Drawings Sonepur CCB.pdf
Tender Document
11 BOQ SON 002 PM ABHIM.pdf
Tender Document
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .