CA NO GE SOUTH AMB 53 2020 2021 CERTAIN MISC BR WORKS AND INTERNAL EXTERNAL PAINTING AT HERITAGE MESS 612 I INF BDE AND DIV HQ AREA IN SOUTHERN ZONE OF AGE BR I UNDER GE SOUTH AMBALA CANTT

Amount

Material and labour for preparation of old decorative surface of wall etc by washing rubbing down including scrapping and applying one coat of cement base paint of any tint complete all as specified and directed.

Material and labour for preparation of old decorative surface of wall including washing rubbing down and stopping of distempered and painted surfaces and applying one coat of interior emulsion (White / tint) complete all as specified and as directed.

Description all as per Srl item No 2.00 above but as on ceilings complete all as specified and directed.

Material and labour for complete removal of existing treatment of walls/ceiling and applying two coat of interior emulsion over a coat of primer including over a layer of Birla wall care putty including rubbing, cleaning to obtained smooth finish complete all as specified and directed.

Material and labour for preparation of old decorated surfaces of walls including scraping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots etc. including cornices, pilasters etc. (Plastered or unplastered surfaces) and applying one coat of exterior emulsion paint complete all as per manufacturers instructions and as directed.

Preparation of old plastered or unplastered surfaces of walls by brooming down or steel wire brushing scraping down smoke soot, moulds moss and efflorescent salts, trading oil and greasy spots and applying one coat of colour wash complete all as specified and directed.

Preparation of old treated surfaces (Plastered or un-plastered) of walls cornices etc by brooming down or steel wire brushing, scrapping down smoke soot moulds, moss, efflorescence salts treating oil and greasy spots etc and applying one coat of white wash, complete all as specified and directed.

Preparation of old treated surfaces (Plastered or un-plastered) of ceiling by brooming down or steel wire brushing, scrapping down smoke soot moulds, moss, efflorescence salts, treating oil and greasy spots etc. and applying one coat of white wash on ceiling, complete all as specified and directed.

Taking down cement plaster of any description and in any position including raking out joints, hacking for keys, scrubbing down with water etc. of any thickness including dado any description, complete all as specified and directed.

Material and labour for 15mm thick rendering in cement mortar (1:4) on brick or concrete surface of any description, finished the surface even and smooth without using extra cement complete all as specified and directed.

Supply only integral water proofing compound complete all as specified and directed.

Material and labour for 5 mm thick rendering in cement mortar (1:3) on brick or concrete ceiling surface of any description, finished the surface even and smooth without using extra cement complete all as specified and directed.

Material and labour for 15mm thick rendering in cement mortar (1:6) on brick or concrete surface of any description, finished the surface even and smooth without using extra cement complete all as specified and directed.

Material and labour for 15mm thick rendering in cement mortar (1:4) mixed with WPC @2% by weight of cement or as per manufacturer’s instructions, finished even and fair on brick or concrete surface of any description, on parapet walls and similar location hight exceeding 6 mtr but not exceeding 12 mtr including necessary scafolding etc required finished the surface even and smooth without using extra cement complete all as specified and directed. (Note : WPC shall be measured and paid separately)

Preparation of old painted wooden surfaces of any description over 10cm width or girth and applying one coat of synthetic enamel paint, complete all as specified and directed.

Description all as per Srl item No 15.00 here in before but two coats of synthetic enamel paint, complete all as specified and directed.

Preparation of old painted steel surfaces of any description over 10cm width or girth and applying one coat of synthetic enamel paint, complete all as specified and directed.

Description all as per Srl item No 17.00 above but two coats of synthetic enamel paint, complete all as specified and directed.

Material and labour for Renewing non-skid/vitrified/glazed tiles in patches, area not exceeding 5 sq.m. including removing and cleaning old tiles, preparing beds and laying or setting, jointing and pointing new tiles of matching colour and size or old tiles after cleaning etc complete all as specified and directed.

Taking up or down steel tubing and connections for 15mm dia including cleaning for refixing or removal to store complete all as specified and directed.

Description all as per Srl item No. 19.00 here in before but 20mm dia complete all as specified and directed.

Supply and fixing for Steel water tubing of 15 mm bore, medium grade galvanized, ISI marked with all fittings laids in floor with wall and on ceiling, complete all as specified and directed.

Description all as per Srl item No. 21.00 here in before but 20mm dia GI pipe, complete all as specified and directed.

Refixing GI tubing 15 mm bore including all necessary fittings to walls/ceiling or laid in floors, complete all as specified and directed.

Description all as per Ser item No. 23.00 above but 20mm dia GI pipe complete all as specified and directed.

Supply and fixing (in repair) for PVC water storage tank 500 Litre capacity HDPE double layer ISI marked fixed & hoisted in position on staging or roof complete with locking arrangement, over flow pipe, air lock pipe, Ball valves, high pressure of PTMT with, ISI marked complete all as specified including dismantling of old tanks of of any description complete all as specified.

Supply and fixing (in repair) for PVC water storage tank 1000 Litre capacity HDPE double layer ISI marked fixed & hoisted in position on staging or roof complete with locking arrangement, over flow pipe, air lock pipe, Ball valves, high pressure of PTMT with, ISI marked complete all as specified. including dismantling of old tanks of of any description complete all as specified and directed.

Supply and fixed (in repair) stop valves, cast copper alloy ISI marked screwed down, high pressure, with crutch or butter fly handle screwed both ends for iron pipe or for unions, suitable for 20 mm bore tubes, complete all as specified.

Supply & fixed (in repair) stop valves, cast copper alloy ISI marked screwed down, high pressure, with crutch or butter fly handle screwed both ends for iron pipe or for unions , suitable for 15 mm bore tubes, complete all as specified and directed.

Supply & fixed (in repair) 15mm fancy type, chromium plated, angle valve, cast copper alloy, screwed down high pressure with crutch or butterfly handle, heavy with adjustable wall flange, complete all as specified.

Supply & fixed (in repair) stop cock, fancy type, chromium plated, long shank and cup (concealed type) screwed down high pressure with crutch or butterfly handle screwed both ends suitable for 15mm bore pipe, complete all as specified. (NOTE: - Weight of stop cock shall not be less than 0.575 Kg).

Supply & fixed (as in repair) for bib tap screwed down high pressure, long body, cast copper alloy, chromium plated with crutch or butterfly handles screwed down suitable for 15mm bore pipe or union, complete all as specified.

Material and Labour for cutting chases for concealed water tubing and making good, (cutting not exceeding 10 cm girth) in cement mortar (1:3), complete all as specified and as directed.

Supply and fixed (in repair), galvanized steel wire cloth 0.56mm nominal dia of wire and average width of aperture 1.18mm fixed with tinned tacks or galvanized wire staple and including fixing with beads supplied with joinery when fixed in panels of joinery, complete all as specified and directed.

Hacking out old broken glasses (any thickness/type and in any position) from wooden frames/metal frames fixed with oil putty or beads etc. and removing from site complete all as specified and directed.

Supply and fixing for sheet glass 3mm thick, ordinary quality , in square not exceeding 0.5 Square metre each pane and glazing with oil putty to steel window and with wooden beads to wooden shutters, complete all as specified and directed.

Dismantling of PVC (SWR) pipes any length complete all as specified and directed.

Supply and fixing 110 mm bore UPVC (SWR) plain bend any radius including jointing with solvent cement, complete all as specified and as directed. (NOTE: - UPVC bends shall be confirm to BS 4515 DIN 19531 and DIN 19534)

Supply and fixing 110 mm bore UPVC (SWR), junction single T (equal or unequal), including jointing with solvent cement, complete all as specified and as directed.

Supply and fixing PVC (SWR) pipe 110mm bore single socketed in any length with rubber ring fixed to wall with suitable size MS clamp and nut complete all as specified and directed.

Demolition of cement concrete in ground floor and pavings not exceeding 15cm thickness (below or above ground level) and removal the rubbish/ demolished material complete all as specified and directed.

Material and labour for 75 mm thick PCC 1:4:8 type D-2 (using 40 mm graded mechanically crushed stone aggregate) as in sub base to floor/hardstanding, complete all as specified and directed.

Material and labour 60-62mm thick, machine pressed PCC pavers block interlocking tiles, any shape & size conforming to IS 15658 of 2006, M-35 grade made up with 12.5mm graded mechanically crushed stone aggregates , factory made, laid over and including 30 mm thick sand cushioning and joints filled with fine sand incl levelling tamping & sweeping complete all as specified and directed.

Material and Labour for providing factory made Precast Cement Concrete kerb stone, 1:2:4 type B1 (using 20mm graded aggregate) with plain fair faces, including chamfers, weatherings, throating etc. and set in CM 1:4 complete all as specified and directed. NOTE : - The minimum size of Kerb stone shall be 300mmx300mmx100mm and shall be embedded in the ground average 10cm deep. The quoted rates includes embedding kerb stone and consolidating ground around kerb stone and removal of surplus soil, etc.

Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust etc. including Brushing old cement concrete floor with brushing neat cement slurry with 3.0 kg of cement per sqm complete all as specified and directed.

Material and Labour for Premium quality, vitrified ceramic tiles, dark shade of size 600 x 600 x 10 mm thick as in floor, set and jointed in neat cement slurry @ 3.00 kg/Square metre and pointed in white or coloured cement to match the surface over and including cement screed bed 15mm thick in cement mortar (1:4) base complete all as specified and directed.

Dismantling of floor hearth or wall tiling including cement mortar bedding and removing the rubbish outside the defence land complete all as specified and directed.

Supply and fixing for heavy duty tiles (coloured), good grip series, size 300 mm x 300 mm x 10 mm thick, pattern as approved by Engineer-in-Charge, set, jointed and pointed in neat cement slurry, laid over and including 20 mm thick (average thickness) cement mortor (1:4) bed, complete all as specified and directed.

Providing technically qualified person (Engineer) for preparation of PSMB including carrying out of measurement of old Bldgs as per normal Engineer practice falling under the area of AGE B&R-I under GE (South) Ambala Cantt. Also providing necessary documents (e.g stationery items etc.) for preparation of PSMB, entering site measurement of following items in PSMB as per the format kept in Sub Division: - (a) White wash in ceiling surfaces. (b) White wash in wall surfaces. (c) OBD on wall surfaces / dry distemper (d) Interior emulsion (Plastic paint) on wall surfaces. (e) Cement base paint on wall surfaces. (f) Exterior emulsion paint on wall surfaces. (g) Synthetic enamel paint on wooden surfaces. (h) Synthetic enamel paint on steel surfaces. (j) Varnish. (k) Small article paint steel/wooden. This item includes submission of PSMB building wise falling under AOR of AGE B&R-I under GE (South) Ambala duly scrutinized and signed by JE (Civil) and Engineer-in-Charge and Numbered and audited by Audit authorities. NOTES: - 1. The above PSMB shall be prepared by Engineer having minimum qualification diploma in Civil Engineering from approved Technical Institute alongwith minimum work experience of three years. Details of qualification and experience shall be verified and kept on record by Engineer-in-Charge. 2. PSMB shall be submitted by the contractor before submission of 1st RAR of above work complete in all respect duly signed and audited. 3. The contractor shall be paid for Square meter of periodical items worked out in PSMB as per plinth area of particular bldg. 4. Necessary security pass shall be issued by Engineer-in-Charge in favour of Engineer being appointed by the contractor for the purpose on the basis of particular submitted by the contractor in writing alongwith Police Verification with regard to Character and antecedents of the Engineer. 5. Irrespective of above, in few bldg where complete periodical services are not carried out (Only 2 or 3 items are executed) contractor will prepare PSMB for entire bldg covering all items as mentioned above irrespective of item executed by him. The contractor will aslo prepare PSMB of the Bldgs where the work even not executed by him all as per direction of Engineer-in-Charge. 6. In case of repetitive nature of bldgs where work has been executed by the contractor the payment shall be made only for area to be measured at first instant. No repetition of area shall be allowed and taken into consideration for payment purposes.

Shubham Enterprises

Ashwani Kumar

RAJESH KUMAR