Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Infra Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹32.1 LAccepted-AOC | L1 | Accepted-AOC Being Lowest | |
| 2 | L2₹34.0 L+₹55,037 (1.65%)Rejected-Finance 231 JAGGI GARDEN BALDEV NAGAR AMBALA CITY 134003 | AMBALA CITY | AMBALA | HARYANA | 134003 | L2 | Rejected-Finance Other Than Lowest Bidder | |
| 3 | L3₹41.2 L+₹7.7 L (23.1%)Rejected-Finance | L3 | Rejected-Finance Other Than Lowest Bidder |
Tender Value
₹49.5 L
EMD Value
₹99,000
Closing Date
11 Jul 2024, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE Chandigarh
GE Chandigarh N Area Pin-160003
WELCOME MAINTENANCE FOR OFFRs/JCOs/Ors MD ACCN INCLUDING REPAIR TO PERISHED WORNOUT JOINERY CUPBOARDS, KITCHEN SHELVES IN MD ACCN AT NAHAN UNDER GE CHANDIGARH
2024_MES_659833_1
GE/CHD-18/2024-25
Open Tender
Civil Works
Item Rate
270 days
Nahan Under GE Chandigarh
Class D category a(i) for contractor enlisted in MES
7 documents required · 7 mandatory
₹500
GE Chandigarh
₹99,000
Yes
6 Sept 2024
14 Jun 2024
13 Jul 2024
14 Jun 2024
11 Jul 2024
29 Jun 2024
14 Jun 2024 - 21 Jun 2024
Amount
Demolitioin of cement conc in ground floors and pavings n.exc 15cms thickness (below or above GL) Complete all as specified and as directed.
Dismantling wrought iron or mild steel work of any description and in any position not otherwise provided for, Complete all as specified and as directed
Dismantling of plain or corrugated steel sheeting, any gauge, thickness, including nainital or similar pattern roof covering, Complete all as specified and as directed
Dismantling timber scantlings 40 sq. cm and over in section, in any position, Complete all as specified and as directed
Demolitioin of Concrete (reinforced) of any description and in any position, Complete all as specified and as directed
Taking down steel water tubing 20mm with all fittings from walls, ceiling and floors, complete all as specified.
Taking down steel water tubing 25 mm with all fittings from walls, ceiling and floors, complete all as specified.
Taking down chowkhats or frames with shutters (without taking off shutters from the frames) of size not exceeding 1.50 Sqm each including cutting holes in walls of appropriate size for insertion of cement concrete blocks for hold fasts complete all as specified.
Taking down chowkhats or frames with shutters (without taking off shutters from the frames) of size exceeding 1.50 Sqm but n. exc 4.0sqm each including cutting holes in walls of appropriate size for insertion of cement concrete blocks for hold fasts complete all as specified.
Taking down shutters of any description, area exc 1 sqm and not exc 2.00sqm each complete all as specified.
Taking down cement or cement lime plaster, any description on brick or stone walls etc including raking out joints, hacking for key, scrubbing down with water etc, including cutting of trees, shrubs or any type of vegitation upto and including roots all as specified.
S&F in repair vitreous China wash basin, white Flat back , size 550x400 mm including brackets, waste cupling and waste pipe complete all as specified and as directed.
S&F in repair Brass CP mixer for mixing hot & cold water screwed down for iron pipe and fixed screwed for 15 mm bore iron pipe and fixed complete all as specified and directed.
S&F in repair 15mm dia bib taps CP brass,fancy type,long body, screwed down, screwed for iron pipe complete all as specified and as directed.
S&F in repair 15mm dia Pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and as directed.
S&F in repair cast iron Nahani trap(dia of outlet 75 mm), with grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) complete all as specified and as directed.
S&F 4mm sheet glass ordinary quality and glazing with oil putty or in aluminium frame work in squares/rectangles n exc 0.5 sqm in each pane, Complete all as specified and as directed
All as per item No 17 above but figured/froasted/pin headed type , Complete all as specified and as directed
M&L for Providing and injecting chemical emulsion for Post Constructional Antitermite Treatment along external wall where the apron is not provided using chemical emulsion at the rate of 7.5 litres per sq.m of the vertical surface ofthe sub-structure to a depth of 300mm including excavating channel along the wall and rodding etc. complete all as specified.
S&F in repairs 6mm thick bakelite sheet printed/wood grain finish/decorative choice fixed in aluminium panels complete all as specified and as directed by Engr-in-Charge.
S&F in repair 17-18mm thick HDHMR Encl board high density, water, termite, boer and fungus resistant, laminated both sides fixed with screws to timber frame work as in cupboard shelves, shutters, bathroom doors, kitchen cabinets etc complete all as specified and as directed by Engr-in-Charge
S&F in repair 19mm thick plywood BWR type BB, fixed with screws to timber frame work as in cabinets etc, Complete all as specified and as directed
S&F in repair 1.00 mm thick sunmica to be fixed with adhesive with plywood surfaces and wooden surfaces,Complete as per direcrtion of Engineer-In- Charge.
S&F in repair SS 304 cutlery trays of size 370 x485 x 100mm and 0.6mm thickness 4 moduler kitchen concept including fixing withslider, rollers for front and back movement complete all as specified and directed. Make : HAFELE/ Hettich/Godrej/ Harrison or equivalent as aproved by GE.
S&F in repairs stainless steel grade 304 multipurpose tandem box drawer of size 850 x 500 x 200mm and 0.6mm thick having space for deep and shallow storage for bottom cabinets including blum Tandem runners fixing clips. Tandem runners cover cap, front fixing fascia bracket and mounitng plate and all necessary fitting and fixture and D-type cabinet handles premium quality gloss chrome/ SN finshed 150mm long matt finished, front and back movment complete with and including tray conteainers and utensils compete all as specifed and directed. Make : HAFELE/ Hettich/Godrej/ Harrison or equivalent as aproved by GE.
S&F ball catcher for cupbords and kitchen cabinets incl both male & female part making each set, Complete all as specified and as directed
S&F continuous (piano) hinges 30 mm wide , SS Gde-304, bright finish or electrogalvanised, Complete all as specified and as directed
S&F in repair 100 mm Hasp and staple, safety type, aluminium anodised hinge pin including bolt to hinge plate and fixed with screws
S&F Stainless steel wire cloth.0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and as directed.
All as per item No 29 above but fixed in repairs
Cutting chases in stone wall, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth, Complete all as specified and as directed
Supplying and laying CPVC pipes (SDR-11) of outer dia 20mm with and including CPVC SDR-11 fittings on walls and ceilings or laying in floors complete all as specified and as directed.
All as per item No 32 here-in-before but 25 mm dia complete all as specified and directed.
Taking down shutter and refixing the same after easing & minor altearation in sizes area not exc 1.00 Sqm , Complete all as specified and as directed
Taking down shutter and refixing the same after easing & minor altearation in sizes area exc 1.00 Sqm but n exc 2.00Sqm each complete all as specified and as directed
M&L for rendering 15mm thick on fair faces of brick work or concrete surfaces ,in cement mortar1:4, (with WPC) in patches complete all as specified and as directed by Engr-in-Charge. Note: WPC will be measured and paid seprately.
M&L for rendering 15 mm thick on stone masonry surfaces or surface other than fair face of brick-work or on one side of lathing in cement mortar 1:4 (with WPC) including, complete all as specified. Note: WPC will be measured and paid seprately.
M&L for rendering 15mm thick on fair faces of brick work or concrete surfaces ,in cement mortar1:6, in patches complete all as specified and as directed by Engr-in-Charge.
M&L rendering 5 mm thick cement plaster in CM (1:3) on ceiling surfaces, complete all as specified and directed.
M&L for Two coats of cement base paint on new wall surfaces including all necessary preperation of new wall surfaces wetting and curing, complete all as specified.
M&L for Two coats of distemper oil emulsion (OBD) on new plastered wall surfaces of any description over and including 2mm thick wall care putty complete all as specified including preperation of surfaces, complete all as specified and directed.
Three coat of white wash on new ceiling surfaces including all necessary preparation and wetting and curing, complete all as specified.
M&L for Two coats of cement base paint on old wall surfaces including complete removal of existing treatment and all necessary preparation and wetting and curing, complete all as specified.
M&L for Two coats of distemper oil emulsion (OBD) on old wall surfaces including complete removal of existing treatment and all necessary preparation with and incl priming plastered surface over and including 2mm thick wal care putty, complete all as specified.
Three coat of white wash on old ceiling surfaces including all necessary preparation and wetting and curing, complete all as specified.
M&L for One coat of synthetic enamel paint over old painted wooden or wood based surfaces of any description, not otherwise described over 10 cm width or girth, including preparation of surfaces complete all as specified.
M&L for One coat of synthetic enamel paint over old painted steel & iron surfaces of any description, not otherwise described, over 10 cm in width or girth, including preparation of surfaces complete all as specified.
M&L for Preparation & painting old painted surface and applied two coats of synthetic enamel paint (Ordinary tint) over and incl red oxide zinc chrome, over CGI sheeting /surface of any description, over 10 cm in width or girth, complete all as specified and as directed
Material & Labour for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including 2mm thick putty and a priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over old surfaces in camouflaging pattern or in any other pattern upto 3rd story bldg after complete removal of existing treatment from wall surfaces including rubbing with sand paper & scrubbing down with water etc complete all as specified and as directed.
Supply only liquid water proofing compound complete all as specified and as directed.
M&L for Painting of New steel and iron surface of any description, not otherwise described two coats of synthetic enamel paint over and including a coat of red oxide, Complete all as specified and as directed.
S&F in repair 20-25mm mm dia curtain rod made of aluminium Pipe with decorative lining coating,including brackets and decorative balls / caps at both ends of rod with comp fittings complete all as specified and directed.
S&F in repair 20mm dia SS 304 curtain rod including brackets, decorative balls/caps on both ends of curtain rods with comp fittings complete all as specified and directed.
S&F Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; fascia gutter , framed balusters; walk ways; railings; and similar work conforming to Fe.290.Gde-E-165, complete all as specified and as directed.
S&F Fe-410-W(Gde E-250)quality B rolled mild steel in roof trusses(Framed)trusses, purlin, crane gantries, rails anfd framing(beam, tee, angle, channel or flat section)including distance pieces , cleats etc.Complete all as specified and as directed
Dismantling wall and ceiling boards (fibre pulp, insulation, etc) or insulation boards/slabs/blankets any thickness including cover fillets, Complete all as specified and as directed.
S&F Gl frame work for seamless ceiling comprising of Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre incl fixing hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long for false ceiling with and incl 7mm thick laminated prepainted gypsum boards or tiles for insulation and accoustic purposes, 60cm x 60cm in size all as specified for size of grid 605 x 605mm.
Providing and fixing False ceiling at all heights with fully perforated 12mm thick micro tegular edged or 10 mm thick square edged GRG (Glass Fibre Reinforced Gypsum) false ceiling tiles of size 595mm X 595mm of approved texture, design and patterns having moisture content less than 2%, humidity resistance of 99%, NRCO 0.50 to 0.75 as per IS 8225:1987, Noncombustible as per BS 476(part-4) -1970 and light reflectance of 85% (minimum) to be laid in true horizontal level suspended on inter-locking metal T-grid of hot dipped galvanised iron section of 0.33 mm thick (galvanised @120 gms per sqm incuding both sides) comprising of main-T runners of size 15mm X 32mm of length 3000 mm, Cross-T of size 15mm X 32mm of length 1200 mm and secondary intermediate cross T of size 15mm X 32mm of length 600mm to form grid module of size 600mm X 600mm, suspended from ceiling using galvanised mild steel items (galvanising @80 gms/sqm) I.e 50mm long, 8mm outer diameter M-6 dash fasteners, 6mm dia fully threaded hanger rod upto 1000mm length and L-shape level adjuster of size 85X25X2mm. Galvanised iron perimeter wall angle of size 24mmX24mmX0.40mm of length 3000 mm to be fixed on periphery wall/partition with the help of plastic rawl plugs at 450mm center to center and 40mm long dry wall wood screws. The work shall be carried out as per specifications, drawing and as per direction of the Engineer-In-Charge.
Disconnecting existing tanks , setting aside (or lowering if required) for repair, cleaning, etc. and hoisting if required reconneecting and refixing in position (Cleaning repairing etc measured separately) exc 250 & n.exc 500 ltr in capacity complete all as specified
Disconnecting existing tanks , setting aside (or lowering if required) for repair, cleaning, etc. and hoisting if required reconneecting and refixing in position (Cleaning repairing etc measured separately) exc 500 & n.exc 1000 ltr in capacity complete all as specified
S&F 2000 Ltr capacity Rotational moulded polyethylene water storage tanks (triple layered cylindrical vertical with closed top) hoisted and fixed in position complete all as specified and as directed.
S&F 1000 Ltr capacity Rotational moulded polyethylene water storage tanks (triple layered cylindrical vertical with closed top) hoisted and fixed in position complete all as specified and as directed.
S&F 500 Ltr capacity Rotational moulded polyethylene water storage tanks (triple layered cylindrical vertical with closed top) hoisted and fixed in position complete all as specified and as directed.
Dismantling water tanks exc. 250 n.exc 500 ltr complete all as specified and as directed.
Dismantling water tanks exc. 500 n.exc 1000 ltr complete all as specified and as directed.
Dismantling water tanks exc.1000 ltr n.exc 2000 ltr complete all as specified and as directed.
Cleaning and removing all scale and dirt, etc, from tanks and from mouths of circulating pipes, etc(exc 250 & nexc 500 ltr), complete all as specified and as directed.
Cleaning and removing all scale and dirt, etc, from tanks and from mouths of circulating pipes, etc(exc 500 & nexc 1000 ltr), complete all as specified and as directed.
S&F in repair Chromium plated brass Toilet paper holder, complete all as specified and as directed.
S&F in repair Chromium plated brass Jet spray with tube 1.5 mtr, Complete all as specified and as directed, Complete all as specified and as directed
S&F in repair Chromium plated brass 2 in 1 health faucet with hook 1mtr tube, Complete all as specified and as directed
S&F in repair PVC connections 15mm size with brass chromium nuts of length 450mm, Complete all as specified and as directed
S&F in repair brass chromium plated Tubler towel rail, 20mm dia, D type, 60cm long between flange, Complete all as specified and as directed
S&F in repair 15mm dia Ball brass valves high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed
Taking down CI soil waste or vent pipe 100mm bore including all fittings like trapes,bends,junctions etc from any situation complete all as per specified and as directed
Taking down CI soil waste or vent pipe 75mm bore including all fittings like trapes,bends,junctions etc from any situation complete all as per specified and as directed
S&F 110 mm PVC SWR Pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors or fixed to walls , Complete all as specified and as directed
S&F 75 mm PVC SWR Pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors or fixed to walls, Complete all as specified and as directed
S&F in repair 110 mm PVC SWR Bends any radius, Complete all as specified and as directed
S&F in repair 75 mm PVC SWR Bends any radius, Complete all as specified and as directed
S&F in repair 75 mm PVC (SWR) floor trap, plain with grating including jointing with solvent cement, Complete all as specified and as directed
S&F door strip (snake guard strip) minimum 18mm wide aluminium body and nylon brushes minimum 22mm wide alongwith screws for fixing complete all as specified and directed.
Providing and fixing anodised aluminium work for door windows, ventilators, casement/sliding shutters and partitions with extruded built up standard tabular and other sections of approval make fixed with rawl plugs and screws or with fixing clips or with expansion hold fastner incl neceesary filling up of gaps at junctions at top bottom & sides with required PVC neoprene belt etc. Aluminium section shall be smooth rust free straight mitred and jointed mechanically where ever required including cleats angles, aluminium snap beading for glazing/panelling, CP brass/stainless steel screw incl providing hinges/pivot and making provision for fixing of fittings where ever required. (Note:- The rate is inclusive of rollers, Maruti locks/star locks, robber beading, rubber seal etc for sliding/casement shutters required for satisfactory operations of window/ventilators/doors or as directed by Engineer-in-Charge. 2. panel fillings other than aluminium filling and necessary fittings shall be measured and paid for seoparately under respective items.)
Supply and fixing factory made UPVC Three track three panels sliding window with fly proof S.S wire mesh (Two nos. glazed & one no. wire mesh panels) upto 1.50m height made of (big series) frame 116 x 45 mm & sash 46 x 62 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Area of window above 1.75 sqm) comprising of uPVC multi chambered frame, with inbuilt roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension of uPVC extruded glazing beads and uPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylon rollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, complete all as specified and directed by Engineer-in-Charge. (Glass or wiremesh shall be paid separately)
M&L for plain cement concrete (1:4:8), type D-2, using 40 mm graded stone aggregate as in foundations, filling, mass concrete and sub base complete all as specified and as directed.
M&L RCC 1:2:4 type B-1 using 20mm graded crushed stone aggregate as in slabs supported on walls, roofs, landings, shelves and the like, complete all as specified and as directed
M&L for formwork to soffits of suspended slabs such as roof slabs, floor slab, landings and similar work not exceeding 200mm thick, horizontal or sloping finished rough complete.
TMT bars 10mm dia and over cut to length , bent to shape required including , cranking hooking ends and binding with and including mild steel wire(annealed) not less than 0.9mm dia or securing with clips complete.
Cement concrete type B -0, 1:2:4 (12.5mm graded aggregate) 25 mm thick, Complete all as specified and as directed
M&L Non Skid ceramic coloured tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 Sqm but not exceeding 0.11 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match, over and include 15 mm thick screed bed in CM 1:6, Complete all as specified and as directed
M&L coloured Vitrified light shade Ceramic tiles 8 to 9mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match cover and include 15 mm thick screed bed in CM 1:6, Complete all as specified and as directed
S&F ultracharged Vitrified Ceramic tiles 8-9mm thick (square/ rectangular) area of each tile exceeding 0.42 Sqm but not exceeding 1.00 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match, over and include 15 mm thick screed bed in CM 1:6 complete all as specified and directed.
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises, Complete all as specified and as directed
M&L Glazed ceramic coloured,,tiles 450x300x6-7mm thick in vertical surfaces such as skirting,dados and risers to steps over and including 10mm thick in CM (1:4). Complete all as specified and as directed
M&L for 18-20mm thick granite machine cut stone slab (table rubbed polished) as in cooking platform , jamb, cill, step & riser setted and jointed with cement slurry and bedded over & including 15mm thick bedding layer of cement sand mortar (1:4), & pointed with white/ coloured cement including grinding, rounded and chamfered edges and granite polishing etc complete all as specified and as directed.
S & F 0.63mm galvanised, corrugated mild steel sheeting with two corrugations side lap fixed with coach screws and washers in roofs, walls etc with grade of zinc coating 275, Complete all as specified and as directed
S&F 0.63 mm thick Plain, galvanised, mild steel sheeting, in ridges, hips, valley gutters, drip and straight flashing (length and girth as fixed) with grade of zinc coating 275, Complete all as specified and as directed
S & F 0.50mm thick pre painted galvalume aluminium zinc coating GI based corrugated steel sheeting having 550 Mpa as in roof covering/cladding to walls fixed with self tapping screws as specified
S & F 0.50mm thick pre painted galvalume aluminium zinc coating GI based plain steel sheeting having 550 Mpa as in roof covering/cladding to walls fixed with self tapping screws as specified
S&F in repair S&F sinks made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or includingfixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm, Complete all as specified and as directed
S&F 5.00mm thick glass corner shelf one piece having stainless steel perimeter border all as specified and as directed.
S&F factory made solid PVC Door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet reinforcved with MS sqyare tube in opening as per specified.
S&F factory made solid panel PVC Door shutter 30mm thick (stiles)consisting of frame made out of MS tubes for top & bottom rails, MS frame shall be covered with heat moulded plain cover PVC 'C' channel having PVC strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheet for top rail, lock rail and bottom rails on either side & as gap insert for top rail & bottom rails, panelling of plain colour PVC sheet to be the fitted in MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading and jointed together with solvent cement supplying and fixing in the frame at site as per specification and drawing.
S&F Stainless steel 100 mm Butt hinges, hinge pin, anodised and fixed, type C-21, Complete all as specified and as directed
S&F 125 mm Stainless steel, barrel tower bolts of extruded section and fixed, Complete all as specified and as directed
S&F 150mm size, Stainless Steel, D type with back plate, handle and fixed with screws complete all as specified.
S&F 250 mm long Stainless steel sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed, complete all as specified and directed.
M&L for painting of new wooden surface of any description ,not otherwise described and two coats of synthatic enamel paint over a coat of pink primer, incl prepration of surface, complete all as specified and directed.
Supply and fix 35mm thick factory made plain framed, panelled shutters (two panels), with lock rail and panels of 9mm thick BWP commercial ply or of venered particle board 12mm thick with commercial veneering on both faces with rails and style of 2nd class hard wood. The size of rail and stile as per IS: 1003 (Part-I), kiln seasoned and chemically pressure treated complete all as specified and directed.
Supply and fix 30mm thick flush shutters, solid core construction, with block board core and plywood face one face is covered with decorative face veneer with lippling/frame to match including cupboard partitions/shelves etc complete all as specified and directed.
Supply and fix 2nd class hard wood factory made glazed and skeleton shutters 30mm thick, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc., sizes of members of shutters as specified in clause 8.24 (a) of SSR Part-I; supplied and fitted to chowkhats complete all as specified and directed.
S&F Pressed steel frames 105 x 60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc. including making good to existing surface jamb/floor complete in all respect including demolished flooring /tiles making jambs, giving existing type of surface finish etc so as to mach the existing surface, as specified
S&F Pressed steel frames 125 x 60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc. including making good to existing surface jamb/floor complete in all respect including demolished flooring /tiles making jambs, giving existing type of surface finish etc so as to mach the existing surface, as specified
S&F in repair kitchen Plate Rack stainless steel having size 600mm x900mm x250mm (approx) incl fixing to walls with fasteing screws, rubber/PVC beading /capping complete to sustain utensils weight upto 8-10 Kg, complete all as specified and directed.
S&F in repair waste pipe 32mm dia flexible for Sink and WHB all as specified and as directed.
S&F in repair brass chromium plated shower rose 125mm size,with complete fitting
S&F in repairs 10 ltr capacity PVC vlaveless syphonic action type flushing cistern low level,white with inlet ball valve,float and handle including brackets, complete all as specified and directed.
S&F in repair vitreous china (white) counter top wash basin in square / round/rectangular shape of standard size complete all as specified and directed.
S & F in repair vitreous china wash down water closet pan (pedastal pattern) white including PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float,hockey stick and handle including brackets, complete all as specified and as directed.
S&F in repair Vitreous China Squatting pan, 'Orissa pattern, size 580x440 mm white with integral foot rests including PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float,hockey stick and handle including brackets, complete all as specified and as directed.
S&F in repair vitreous china floor mounted wash down one piece water closet pan white (inclusing seat cover ,fixing bolts, flush cistern 10 ltr capacity) complete all as specified and directed.
S&F 8mm sheet glass ordinary quality and glazing with oil putty or using SS tuks / pins as in aluminium/wooden frame work in squares/rectangles as required in squares n exc 0.5sq. m in each pane complete all as specified and as directed.
Hacking out old broken glass (any thickness, size, quality or description) from wooden/steel frames, glazed with putty or fixed with beads complete all as specified.
S&F in repair 18-19mm thick pre-laminated particle board, interior grade pre-laminated one side with decorative choice lamination and other side balancing white lamination fixed with screws to timber/aluminium frame work complete.
M&L machine cut kota stone slab 20-25 mm as in floors etc laid over cement screed bed jointed with grey cement slurry mixed with pigment to match the shade the slab including rubbing and polishing with and incl 15mm thick screed bed in CM 1:6 .
M&L machine cut kota stone slab 20-25 mm thick in risers of steps, skirting dado and pillar laid over cement screed bed jointed with grey cement slurry mixed with pigment to match the shade the slab including rubbing and polishing and incl backing coat 10mm thick in CM 1:4.
Dismantling stone slabs and tiles of any description or thickness laid bedded and pointed in any mortar as in floors, aprons etc
M&L for cutting, grinding and mirror polishing of Kota stone/marble stone in floors,treads of steps etc in any position and in any location
M&L for cutting, grinding and mirror polishing of Kota stone/marble stone in skirting,risers of steps etc in any position and in any location
S&F in repairs aluminium door stopper double legged with rubber shoe 75mm long fixed to door shutters complete.
S&F in repairs 6 mm thick Aluminium composite panel as decorative choice fixed in aluminium panels complete all as specified and as directed by Engr-in-Charge
S&F in repairs mild steel 300mm ordinary rat rail rod pattern springs including roller and roller plates complete incl fixing to frames using welding/screws
M&L for repairing steel windows by welding various parts eg tower bolts etc. at various heights upto 3rd floor including required fittings such as hinges etc complete and make it in functional state all as directed by Engr-in Charge.
Taking down aluminium door/window shutter carefully from frames for servicing / including replacement of broken pivots, tightening of joints of rails and styles etc complete and refixing in the same opening to obtain smooth functioning of the door complete all as specified and directed.
S&F of metal protective and monkey proofing cover with spikes on top for over head PVC tank along with the lock and key arrangement having cover properly including all necessary fittings withscrew and bolts ,comp all as specified and directed by Engr-in-Charge
Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including ,fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc.removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc. all as specified and directed.
Taking down MCCB Incomer DB/MCB DB/AC Box/Meter box of any size and disposal under schedule of credit and making good disturbed surfaces all as specified and directed.
Taking down old unserviceable light fittings any type and removal from site and making good disturbed surfaces of walls, ceiling etc complete all as specified and directed by Engineer-in-Charge to match with existing surface all as directed.
M&L for point wiring using approved colour coding as per IS ( for Phase and neutral) with copper conductor 1.5 sqmm ( Cross sectional area) single core multistranded FRLS ,PVC insulated and unsheathed cable 1100 volts grade,conforming to IS drawn and including PVC concealed coduit with fittings ISI marked ,terminated in modular switch boxes incl 1.5 sqmm (cross sectional area ) single core ,multistranded ,FRLS PVC insulated and sheathed cable as earth continuity conductor connected to earth dolly for one light point/one ceiling fan/Wall fan/exhaust fan point control by one way switch complete all as specified and directed.Note: 1.colour code of wiring should be ( for phase ,red,neutral ,black & earth wire green) 2.Modular switch sockets fan regulators shall be measured and paid separately under respective items deemed to be included in the quoted rates.
All as per item No 141 above but controlled by two way switch.
All as per item No 141 above but one call point controlled by one bell point.
All as per item No 141 above but for one 3 pin,5 Amp socket on same board all as directed.
All as per item No 141 above but for one 3 pin, 5 Amp socket on indipendant board all as directed.
All as per item No 141 above but with 4 sqmm copper conductor for 15 amp socket with 2.5 sqmm earth continuity conductor.
Taking out /dismantling unsv Sub main wiring and S & F Sub main wiring with PVC insulated, FRLS cable 2 single core 6 Sq mm 1100 V grade with stranded copper conductor on and incl PVC rigid non metalic conduit (ISI marked) in concealed incl all specials like joint, elbow , Tee ,junction , bend etc and provision of PVC insulated copper conductor single core 4 sq mm for earth continuityconductor complete all as directed by Enginer-in-charge .
All as per item No 147 above but 2 run of 4 sqmm and one run of 2.5 Sqmm earth contuinity conductor
All as per item No 147 above but 2 single core 1.5 Sq mm,one single core 1.0 sq mm for earth continuity conductor complete all as directed by Enginer-in-charge .
S&F of Modular snap switch SP one way 5/6 Amps suitable for 1 Module complete all as specified and directed.
S&F of Modular snap switch SP two way 5/6 Amps suitable for 1 Module complete all as specified and directed.
S&F of Modular bell push switch, SP one way 5/6 Amps suitable for 1 Module complete all as specified and directed.
S&F of Modular socket 5 pin 5/6 Amps suitable for 2 Module complete all as specified and directed.
S&F of Modular snap switch SP one way 15/16 Amps suitable for 1 Module complete all as specified and directed.
S&F of Modular socket 5/6 pin 15/16 Amps suitable for 2 Module complete all as specified and directed.
S&F of Modular Fan step Regulator electronic, 120 watts, 2 Module complete all as specified and directed.
S&F of Modular blanking plate suitable for 1 Module complete all as specified and directed.
S&F of Modular white cover plate incl Modular base frame & powder coated Modular sheet metal concealed box for 12/8 module complete all as specified and directed.
All as per Item No 158 above but 6/4 module complete all as specified and directed.
All as per Item No 158 above but 3 module complete all as specified and directed.
All as per Item No 158 above but 2 module complete all as specified and directed.
S&F of ceiling rose surface backalite 65mm x 50 mm, two to three terminals complete all as specified and directed.
Supply and fix of Lamp holder, PVC/Polycarbonate type with cord grip cap suitable for pendant fittings complete all as specified and directed.
Supply and fixing Electric bell, AC,230 Volts single phase ding dong type complete all as specified and directed.
Supply and Fix MCB protected socket (Modular AC box) 4 module plasic box with 25A power unit complete all as directed and specified.
Supply and fixing of LED light fitting 1x9W/1X10W bulkhead luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size. complete all as specified and directed.
Supply and fixing LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC,decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and as directed.
Supply and fix in replacement of security light fitting bracket made up of 25/32 mm dia medium grade pipe of length 0.9 mtr with bending in shape by hot or cold method with 2 nos 50x4 mm MS flate clamps with nut bolts and washer etc all as directed
Supply and fixing of Distribution Board double Door made out of CRCA mild steel sheet surface with insulated material like polyester or with epoxy powder coating and IP 43 & IK 09 protection, surface mounting, SPN 8, 240 volts with bus bar rating 200 Amps, dust and vermin proof suitable for incorporation of MCB’s and isolators etc flushed on the existing wall , to match with existing surface and making all necessary connections complete all as directed.
All as per Item No 169 above but SPN 04 way, 240 volts complete all as directed.
All as per Item No 169 above but SPN 12 way, 240 volts complete all as directed.
All as per Item No 169 above but TPN 04 way, 415 volts complete all as directed.
Supply and fixing of MCCB Incomer distribution board double door vertical type made out of CRCA mild steel sheet surface with insulated material like polyester or with epoxy powder coating surface mounting, TPN 4 way, 415 volts with bus bar rating 200 Amps, dust and vermin proof and IP 43 - IK 09 protection suitable for incorporation of MCCB complete all as specified and directed. Make :Legrand/Indo Asian Note : The cost of removing old MCB box and making good of surface as original i.e. brick work, plastering, white washing etc is included in quated rate.
Supply and fixing of MCCB, 415 volts, three pole of cap 63/100 Amps, 25 KA, ICS = 100% ICU, with Thermal - Magnetic Release, including spreader terminals / thimble of suitable size and making connections complete all as specified and directed.
S&F of isolator DP 63 amp 230 Volt complete all as specified and directed.
All as per item No: 38 here in before but isolator TPN 63 Amps, 415 volts complete all as directed.
S&F of isolator SP, 6-40 Amps, 230 Volts complete all as specified and directed.
Supply and fixing LED luminaire 600 mm x 600 mm,35/36 watt, 220 V AC Surface/recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete.complete all as specified and as directed.
Supply and fixing of Indoor Decorative LED box type suitable for fixing ceiling/wall with aluminium base directly retro fit LED tube Light , 22 watt, , Color: Cool day light 4 ft white Operating Voltage: 140-270 volts complete with all accessories internally pre wired and including up with three core PVC copper flexible cable of size 23/0.0076 from ceiling rose to connector block complete all as specified and directed LED batten & LED tube rod shall be of same brand.
Supply and fixing of LED Street (Bldg security) light fitting 35 Watt, 230 V, AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete including taking down old unsv fittings of any size / watt complete all as specified and directed.
Supply and fixing of Post top lantern LED type 20 watt 230 watt volts AC outdoor type with decorative post top for 360 degree indirect light IP 65 protection with impact and corrosion resistant complete with driver and lamp complete incl necessary mounting pole of GI tubing light grade suitable dia of required length incl necessary form work , all fixing accessories,monkey menace protection using steel spikes & barbed wire etc and all electric connections and testing complete incl taking out unserviceable fittings all as specified and as directed.
Supply and fixing of decorative wall mounting chrome finish fixtures with frosted glass light fitting suitable for 2x 12 watt retrofit/non retrofit type holder (base B-22 or E-27) incl 02 Nos of Mini GLS lamp 12 watts with connector block, etc. complete with all accessories prewired and including connecting up with two core round flexible copper conductor cable in white with suitable size complete all as specified and directed.
Supply and fixing of decorative wall mounting chrome finish fixtures with frosted glass light fitting suitable for 1x 12 watt retrofit/non retrofit type holder (base B-22 or E-27) incl 01 Nos of Mini GLS lamp 12 watts with connector block, etc. complete with all accessories prewired and including connecting up with two core round flexible copper conductor cable in white with suitable size complete all as specified and directed.
Supply and fixing of polycarbonate integrated directly retrofit LED tube light T8,18/20 watt(base aluminium) colour cool day light 4 feet white,operating voltage:142-270 volts in existing FTL fitting of capacity 36/40 watts in repairs all as specified and directed.
Supply and fixing of 7 watts LED bulb E-27 non-retrofit type suitable for fancy light fittings 05 to 10 watts complete all as specified and directed.
Supply and fixing of 7 watts LED bulb retrofit type suitable for decorative light fittings 7 to 15 watts complete all as specified and directed.
S&F of LED high bay light fitting out door type 100 watts pressure die cast aluminium housing,electronic driver unit and LED lamp with refector and IP 66 protection incl necessary mounting bolts, connecting up incl taking down old unsv fittings all as directed .
Supply and fixing of LED surface mounting light fitting 18 watts with lamp consisting of prewired high efficiency electronic driver high translucent frosted diffuser glare free smooth high distribution and connected up with white flexible 2 core cable incl taking down Unsv fitting complete all as specified and directed.
Supply and fixing round shape 6 watt 220 volts AC recessed type with high efficiency PMMA diffuser soft glare free light complete with drivers, holders,LED lamp suitable for roof ceiling including connecting up with three core flexible copper conductor cable of suitable size complete including taking down old unsv fittings of any size / watt complete all as specified and directed.
Supply and fixing of IP 65 protection LED bollard fitting 9 watts with electronic driver unit and lamp for landscape lighting having aluminium housing translucent diffuser tube polycorbonate, the colour of bollard is gray or silver and height of bollard 60 cm including mounting nut bolts PVC connecter incl monkey menace protection using steel spikes & barbed wire etc and taking down old unserviceable lights complete all as directed.
M&L in replacement of fabrication of sheet metal enclouser to accommodate 04 Nos electric meters of size 800 mm x 500 mm x 150 mm deep and 1.6 mm thick MS sheet, powder coated, bakelite sheet with side hung shutter including provision of locking arrangement and niche covered with 4 mm thick plain glass , including locking arrangement & open Wiring coverd with Flexible Pvc Pipe of suitable size complete all as specified and as directed.
Supply and fixing of On load Change over switch, 4 Pole,415 Volts,50 Hz,AC,100 Amps side handle operated conforms to IS 60947-1 & 3 incl making all incoming and out going wires are properly fitted through lugs/thimbles complete all as specified and directed.
Supply and fixing of Switch disconnector fuze 200 Amps , 3 Pole & Neutral ,AC,415 Volts,50 Hz with Panel mounting cubical type in sheet steel Encl, with 3 No's HBC fuses incl making all incoming and out going wires are properly fitted through lugs/thimbles complete all as specified and directed.
Supply and fixing in replacement of 1100 volts grade heavy duty cable PVC insulated aluminiumconductor, served with inner sheathing of PVC tape and overall PVC sheathed in service connections suspended by insulating hangers not more than 1 metre apart including 4mm suspension wire, one twin core cable flat or circular of size 10 sqmm 2 core complete all as directed.
All as per Item No 194 above but 16 sqmm 2 core omplete all as directed
M&L for Painting of ceiling fans complete, in situ with synthetic enamel paint by spraying including filling cavities with filler, one coat after cleaning all dust etc all as specified and directed.
Material and labour for road / path way any type (Concrete) cutting , including excavation, returning filling in, spreading, leveling, well ramming in layers, soiling with broken boulders/ stones, WBM 7.5 cm thick coarse aggregate received from dismantling the existing road, premix, carpeting 25 mm thick using ready mix patch mate material, rolled and compacted for road patch repair work, complete all as directed.
Meterial and labour for cement concrete in foundations for pole or any other work type C2 1:3:6 with 40 mm gradedcrushed stone aggregate all as directed
Meterial and labour for cement concrete in foundations for pole coping or any other work type B0 1:2:4 with 12.5mm graded crushed stone aggregate all as directed
Meterial and labour for cement concrete in foundations for pole or any other work type D2 1:4:8 with 40 mm graded crushed stone aggregate all as directed.
Earthing complete with Galvanised steel earth plate electrode of size 60cmx 60cm x 6mm thick electrode buried directly in ground (earth pit not less than 2.25 meters deep below the normal ground level) with top edge of the plate not less than 1.5 m below normal Ground Level connected to GI earth wire 4 mm dia by means of bolts, nuts, check nuts and washers and earth lead protected by 15mm dia GI pipe medium grade connected to main distribution board/ earthing test point all as shown on electrical plate No-03 of SSR Part-1 and all as specified including testing on completion.Note: The unit rate shall also include for excavation, earth work in hard/dense soil, plain cement concrete 1:3:6 mix, Type C1 pit, 40mm thick RCC 1:2:4 mix type B1 cover reinforced with 8mm dia TMT bars @ 150mm c/c both ways , GI funnel with watering pipe 20 mm dia, wire mesh, salt and charcoal, protection pipe for earth lead upto 7.50m long complete in addition to item No 1 (a) to (e) of preamble (notes) under sub heading earthing, specified in SSR part-II earth lead wire and protection pipe beyond 7.5m shall be measured and paid separately.
Excavation in trenches in soft/loose soil not exceeding 1.50 meter wide and not exceeding 1.5 meter in depth and not exceeding 10sqmm on plan and getting out complete all as specified.
Returning,filling in including spreding, levelling, watering and well ramming in layers not exceeding 25 cm thick each excavated soil in trenches after the pipes have been laid and tested completed as in soft/loose soil, complete all as specified.
Removing of surplus soil/excavated material to a distance not exceeding 50meter and depositing where directed at a level not exceeding 1.5m above the starting point complete all as specified.
M & L for Brick protection for LT cable with sub class "B" bricks laid dry and flat abutting each other with gaps between adjacent bricks not exceeding 10mm with width equal to length complete all as specified and directed by Engr-in-Charge
Sand cushioning with clean dry sand to cables with layer of sand 8cm before laying of cable and 15cm thick after laying of cable complete all as specified. Note : For payment purpose punned thickness of 18cm shall be measured against spread thickness of 23cm as mentioned in para 19.75 of SSR part-I
Supply and fixing in replacement of GI pipe light grade size 40 mm dia for protection of UG cable , Road crossing, complete and incl M & L for Clamps suitable size with nuts, bolts,incl excavation, PCC work for fixing of path way lights complete all as specified and directed.
Supply, laying , jointing ,testing and commisioning LT underground cable 1100 volts grade XLPE insulated and steel strip or wire armoured heavy duty with multistranded aluminium conductor 16 Sqm 4 core size including taking out unserviceable complete all as specified and directed. Note:- (i) Excavation and earth work cable protection and sand cushioning shall be measured and paid seperately .
All as per Item No 208 above but size 16 sqmm 2 core.
M&L for earthing complete with copper plate earth electrode of size 60 cm X 60 cm X 3.15 mm thick burried directly in ground earth pit not less than 2.25 mtr deep below ground level with top edge of the plate not less than 1.5 mtr below normal ground level connected to copper strip of 20 mm X 3 mm thick by means of brass or copper alloy nuts, bolts, check nut and washer including earthing pit made by PCC (1:3:6 )type C-1, RCC (1:2:4) type A-1 pre cast cover (54cm X 54cm x 5 cm) duly reinforced with and including 8 mm dia TMT steel bars @ 150 mm C/C both way, one lifting handle made of 8 mm dia TMT bar embedded in precast cover slab and 15 mm dia medium grade GI pipe for watering with funnel having wire mesh and 40 mm dia medium grade GI pipe for protection of copper strip including providing charcoal or coke and salt in alternative layer of 15 cm complete all as shown in electrical plate No-3 including necessary earth work such as excavation, removal of soil n.exc 50 mtr, returning and refilling dismantling the old unserviceable earthing all as specified and directed.
Supply and fixing in replacement of GI Pipe medium grade 80 mm bore inclusive of all fittings such as tees bends, elbows, reducer, bell mouth tube ends and all fixing accessories such as couplers hook, nuts, saddlers, pipe hook etc (8.0 meter long) complete with GI base plate, finial taper plug, bolts, nuts & screws etc including making the holes on the pole (bottom and top) suitable size for drawing of wire 1.5 sqmm 3 core round flexible for connection of security light fitting from junction box to light fittings including of one primer coat, one under coat and one finishing coat of silver paint including dismantling/taking out old unserviceale one all as specified and directed.
Supply and fixing of Exhaust fan 300 mm sweep heavy duty complete with self closing MS louvers, mounted in suitable opening arrangement and suitable for operation on 230/240 Volts single phase, 50 Hz,1400 RPM , AC supply with and including two core PVC insulated, PVC sheathed copper conductor flexible cable 24/ 0.2 mm and making all necessary connection and fixed by using 4 Nos 100 mm long 10 mm dia bolts, nuts and washers and grouted in wall in CM 1:3 (including opening of wall etc) completed all as directed.
S&F of Exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz,RPM 1200, Copper winding of sweep 200mm/250mm and making all electric connections complete all as specified and directed.
Material & Labour for LED driver 36 watts suitable for LED luminaire 600 mm x 600 mm,36 watt fittings/Street light fittings 25/30 Watts complete all as specified and directed.
Bairagi Builders
RONKI RAM AND COMPANY
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .