REPAIRS TO SUNKEN SLABS PORTION PLUMBING SYSTEM AND ALLIED WORK OF JCOS/OR MD ACCN IN PKT 5 AND 6 IN AGE B R II UNDER GE ROORKEE

Amount

Demolition of cement concrete above ground floors and pavings n exc 15 cm thickness of any description not otherwise described

Demolition of cast iron drain pipes 100mm bore, jointed in cement mortar and taking out of trench if required.

Demolition of cast iron drain pipes 75mm bore, jointed in cement mortar and taking out of trench if required.

M&L for rendering 20 mm thick cement plaster in CM (1:3) finished even and smooth w/o using extra cement and using waterproofing compound on fair faces of brick work or concrete surfaces NOTE: WPC will be measured and paid for separately.

M&L for Bituminous water proofing treatment by applying bitumen coat @ 3 Kg per Sqm for receiving APP Membrane complete all as directed by Engr-in-Charge

M&L for APP based polymeric membrane minimum weighing 3kg/sqm and minimum 3mm thick reinforced with polyster non wove fabric (wt. not less than 150 gms/sqm) land on primed surface by forced application complete all as specified including overlapping and sealing complete all as specified and directed.

M&L for plain cement concrete1:4:8 type D2 using brick course aggregate in filling in sunken floors complete all as specified and directed.

M&L PCC 1:2:4 type B-0, (using 12.5mm graded crushed stone aggregate) 25 mm thick as in sub floors for laying of floor tiles complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

M&L Non - skid Ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match (coloured tiles) complete all as specified and directed.

M&L Glazed ceramic tiles in vertical surface 350x 250x 7 mm/ 450X 300X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match complete all as specified and directed.

M&L 20 mm thick Screed bed or bedding layer of cement mortar 1:6 for laying floor finishes complete all as specified and directed.

Supply only integral water proofing compound complete all as specified and directed.

M&L PVC (SWR) soil, waste and vent pipes 110mm bore, pressure rating not less than6kgf/cm2 in any length, with rubber ring joints, laid in trenches or in floors complete all as specified and directed.

M&L PVC (SWR) soil, waste and vent pipes 75mm bore, pressure rating not less than6kgf/cm2 in any length, with rubber ring joints, laid in trenches or in floors complete all as specified and directed.

M&L PVC(SWR) soil, waste and vent pipes 110mm bore, pressure rating 6kgf/cm2, in any length ,with rubber ring joints, fixed to walls complete all as specified and directed.

M&L PVC(SWR) soil, waste and vent pipes 75mm bore, pressure rating 6kgf/cm2, in any length ,with rubber ring joints, fixed to walls complete all as specified and directed.

Supply and fix PVC (SWR) bends (any radius) 110mm bore complete all as specified and directed.

Supply and fix PVC (SWR) bends (any radius) 75mm bore complete all as specified and directed.

Supply and fix PVC (SWR) bend s(any radius) with access door,110mm bore complete all as specified and directed.

Supply and fix PVC(SWR) branch pieces, single (equal or unequal),110mm bore complete all as specified and directed.

Supply and fix PVC(SWR) branch pieces, single(equal or unequal),with access door,110mm bore complete all as specified and directed.

Supply and fix PVC(SWR) branch pieces, Double (equal or unequal),with access door,110mm bore complete all as specified and directed.

M&L PVC (SWR) multi floor trap with grating, dia of outlet 75mm, including jointing with solvent cement complete all as specified and directed.

S&F 110mm PVC (SWR) WC connector with lip ring complete all as specified and directed.

S & F vitreous china squatting pan (Orissa pattern) long pan including connection to trap, and to flushing pipe , anti-syphonage pipe etc incl making good to floor fixed in repair size 580x420mm white glazed with integral footrest with 'P' or 'S' trap complete (excluding flushing cistern and flush) complete all as specified and directed. Make : Cat No 4051Prayag/Equivalent)

S & F in repairs vitreous china wash down water closet pan (Pedestal pattern) white incl 'P' or 'S' trap (Make : Cat No 4022 Prayag or equivalent) and making good the disturbed surface to match with the existing complete all as specified and as directed.

S & F in repair Health Faucet 8 mm dia 1.0 mtr long CP flexible tube & wall hook complete all as specified and directed. (Model : Cat No BES -85 Prayag/Equivalent)

M&L PVC Valve less, syphonic action type flushing cistern, 10 ltrs capacity, low level with inlet, ball valve, float and handle incl brackets complete all as specified and directed. (Make : Cat No 501 Prayag/Equivalent).

M&L tubes, medium grade, galvanised 20mm bore with all fittings and fixed complete to walls and ceilings or laid in floors complete all as specified and directed.

M&L tubes, medium grade galvanised 15mm bore with all fittings and fixed complete to walls and ceilings or laid in floors complete all as specified and directed.

Taking up or down steel tubing and connections 20mm bore, incl cleaning for re fixing or removal to store complete all as specified and directed.

Taking up or down steel tubing and connections 15mm bore, incl cleaning for re fixing or removal to store complete all as specified and directed.

M&L Bib taps, cast copper alloy, CP with crutch or butterfly handle, screwed down, screwed for iron pipe of bore 15mm, fixed in repairs complete all as specified and directed. (Make : Cat No 8506 Prayag or equivalent range)

M&L stop valves cast 20mm bore, copper alloy, CP, with crutch or butterfly handle, screwed for iron pipes of bore 20mm,fixed in repairs complete all as specified and directed. (Make : Cat No 8520 Prayag or equivalent range)

S & F in repairs CP brass shower rose (single lever over head shower incl shower arm casted 375 mm long flat shape with flange) 125 mm size suitable for 15 mm bore pipe complete all as specified and directed. (Make:-Cat No - BOS-87 and BOS-50 Prayag/equivalent).

M&L Shelf of PTMT fixed with and including chromium plated brass screws and wooden /plastic cleats, fixed in repairs complete all as specified and directed. (Make : Cat No 191 Prayag or equivalent)

S & F in repairs towel rail 600 mm long 20 mm dia Brass chromium plated fixed to wall with CP steel screws etc, complete all as specified and directed. (Make : Cat No BA-20 Prayag or Equivalent)

M&L PVC Connections 15mm size with PTMT nuts of length 45cms, fixed in repairs complete all as specified and directed. (Make : Cat No 323 Prayag/Equivalent)

S&F pillar taps , cast copper alloy, with capstan heads, chromium plated, fancy type, screwed down with high pressure, with long screwed shanks and fly-nuts , screwed for iron pipe of bore 15 mm fixed in repairs complete all as specified and directed. Make : (Model : 8903 Make : Prayag OR EQUIVALENT).

S & F in repairs vitreous china wash hand basin, white oval type size 500 x 400 mm (excluding tap) but including Waste coupling, waste pipe, porcelain stopper and a pair of MS bracket etc complete all as specified and directed. (Make : Cat No 4641 Prayag/equivalent)

M&L 32mm bore waste fittings brass chromium plated for glazed ware sinks, basins etc with long screwed shanks and fly nuts ,flange and embedded in red lead cement and other end fixed complete all as specified and directed.

S&F 32mm bore brass chromium plated bottle trap for wash basins with inlet and outlet screwed for pipe or connections incl necessary packing, union and cap Make : Cat No BEA -26 Prayag/Eauivalent)

M&L LDPE Pipes 32mm bore, of pressure rating 6kgf/cm2 fixed complete to walls, ceilings or in floors complete all as specified and directed.

Taking down wooden shutters of any description exc 1 Sqm & not exc 2 Sqm each, resecuring, easing and adjusting and re fixing in same opening complete all as specified and directed.

Taking down Chowkhats or frames exc 1.5 sq. m but n exc 4 sq. m but with shutters (without taking off shutters from the frame each complete all as specified and directed.

M&L Solid PVC door frame of size 50x47mm ,made out of 5mm plain colour PVC sheet reinforced with MS square tube ,supplying and fixing in opening complete all as specified and directed.

S&F Solid PVC door shutter 28 to 30mm thick style with 2,4,6 raised panel design with 2mm thick moulded PVC sheet on the front face and 2mm plain colour PVC sheet on back face ,supplying and fixing in frame at site as per specification and drawing complete all as specified and directed.

S&F MS Butt hinges medium weight cold rolled 100mm size complete all as specified and directed.

S&F Aluminium anodised, barrel tower bolts of extruded section and fixed 100mm complete all as specified and directed.

S&F 125mm long aluminium handles, cast type, anodised complete all as specified and directed.

Taking down cement or cement lime plaster etc incl raking out joints, hacking for keys scrubbing down with water etc complete all as specified and directed.

M&L for rendering 12 mm thick cement plaster on brick or concrete surfaces in CM 1:6 complete all as specified and directed.

M&L for rendering 10 mm thick cement plaster on ceiling surfaces in CM 1:6 finished even and smooth without using extra cement, complete all as specified and directed.

M&L preparation of newly plastered surfaces of wall and ceiling and applying three coats of white wash complete all as specified and directed.

M&L Aluminium alloy anodised sliding door bolt 250mm long with hasp staples(bolt type0and fixing clips of sheets ,cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed complete all as specified and directed.

M&L for roof treatment with polymeric membrance (APP based) with non woven polyster mat as reinforcement with following:- (a) M&L for surface preparation by removal of existing treatment of tar felt, brick tiling, loose particle to ensure or clean smooth and dry surrfaceand preparing the surface. (b) M&L for providing & laying a coat of cold applied bitumen 85/25 based primer on entire surface @ 0.30 Ltr/Sqm on dry and clean surface. (c) M&L for providing & laying APP based polymeric membrane of 3 mm thickness of weight of 3.0 Kg/Sqm with non wovenpolyster fibre as reinforcement on primed surface by torch application with side over laps & joints over laps etc as per manufacturers instruction. (d) M&L for finishing of top surface by two coat of aluminium paint over a coat of blown bitumen 85/25 grade @ 1.2 Kg/Sqm grouted all as specified and as per manufacturers instruction. (e) M&L for providing test with filling of water over roof slab continuously for 48 hours all as secified and directed.

RAJENDER CONSTRUCTION CO

AMAR NATH SHARMA