Annual Maintenance, Repairs and other emergent nature of works for various Water Supply Schemes of PHE Sub-Division Tahab for the year 2025-26. (Part 2nd - Section -F2)

Earth work in excavation by manual means in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed: 1 meter from cutting edge:All kinds of soils

Earth work in excavation by mechanical means (hydraulic excavator) in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed, within a lead of 50 metres:All kinds of soils

Laying and fitting of G.I. pipes (all classes) complete excluding cost of pipes, fittings and Earth work.

100 mm dia GI pipes

80 mm dia GI pipes

65 mm dia GI pipes

50 mm dia GI pipes

40 mm dia GI pipes

25 mm dia GI pipes

20 mm dia GI pipes

Making connection of G.I. distribution branch with G.I. main of following sizes by providing and fixing Tee, including cutting and threading the pipe etc. complete

25 to 40 mm nominal bore

50 to 80 mm nominal bore

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead upto 50 m and lift upto 1.5 m.

Dismantling G.I./D.I pipes (external work) including excavation and refilling trenches after taking out the pipes, manually/by mechanical means including stacking of pipes within 50 meters lead as per direction of Engineer-in-charge :

Above 40 mm nominal bore

15 - 40 mm nominal bore

80-100mm dia D.I pipes

Hire charges of dewatering motor incl. cost of fuel & all carriges complete.

Laying in position centrifugally cast (spun) iron S&S or flanged pipes (excluding cost of pipe)

Providing push-on-joints to Centrifugally (Spun) Cast Iron Pipes or Ductile Iron Pipes including testing of joints and including the cost of rubber gasket.

100 mm dia pipes

125 mm dia pipes

150 mm dia pipes

200 mm dia pipes

250 mm dia pipes

300 mm dia pipes

Dismantling of spindle / rod and check nuts of flanged type sluice valves by way of manufacturing of new spindle / rod made out of mild steel & new check nut made out of gun metal material. The job includes dismantling of sluice valve reassembling after fixing of spindle & check nut duly manufactures and threaded in workshop including cost of welding, packing, carriage to & fro upto the workshop and back to site of work (Complete job) from 100 mm dia sluice valve upto 350 mm dia sluice valve

Dismantling of spindle / rod and check nuts of flanged type sluice valves by way of manufacturing of new spindle / rod made out of mild steel only . The job includes dismantling of sluice valve reassembling after fixing of spindle & check nut duly manufactures and threaded in workshop including cost of welding, packing, carriage to & fro upto the workshop and back to site of work (Complete job) from 100 mm dia sluice valve upto 350 mm dia sluice valve

Dismantling of spindle / rod and check nuts of flanged type sluice valves by way of manufacturing of new check nut made out of gun metal material. The job includes dismantling of sluice valve reassembling after fixing of spindle & check nut duly manufactures and threaded in workshop including cost of welding, packing, carriage to & fro upto the workshop and back to site of work (Complete job) from 100 mm dia sluice valve upto 350 mm dia sluice valve

Decamping of main cable at Filtration Plants from LT poles, cutting of main cable by Hexa blades, providing / fixing of bone china insulators, thimbles, cost of PVC tape rolls, fuse wire, engagement of skilled/ non skilled labours, cost of rope, hire charges of long stair etc. complete job.(The job is to be paid as per actual details at site)

Fixing of GI double collers/ arresting of leakages by way of welding including all sorts of carriages incl. cutting of available G.I pipes as per site requirement.

80 mm dia

100 mm dia

150 mm dia

200 mm dia

Providing / fixing of double collers, G.I./ M.S. for arresting of leakages by using lead & spun yarn incld. earthwork excavation, refilling etc. including all sorts of carriages (length verying from 0.60 to 1 Mtr.)

40 mm dia

50 mm dia

65 mm dia

80 mm dia

100 mm dia

150 mm dia

200 mm dia

Providing and laying hand packed stone soling of suitable size nominal size including ramming and dressing including all leads lifts and all carriages complete.

Structural steel work in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.Welded

Providing and fixing of pipe specials of approved make manufacture including cutting and threading the pipe and making long screws etc incl. all sorts of carriages involved complete.

100 mm dia G.I. Union

80 mm dia G.I. Union

65 mm dia G.I. Union

50 mm dia G.I. Union

40 mm dia G.I. Union

25 mm dia G.I. Union

20 mm dia G.I. Union

15 mm dia G.I. Union

100 mm dia G.I. Elbow

80 mm dia G.I. Elbow

65 mm dia G.I. Elbow

50 mm dia G.I. Elbow

40 mm dia G.I. Elbow

25 mm dia G.I. Elbow

20 mm dia G.I. Elbow

15 mm dia G.I. Elbow

80 mm dia G.I. Nipple 6"

65 mm dia G.I. Nipple 6"

50 mm dia G.I. Nipple 6"

40 mm dia G.I. Nipple 6"

25 mm dia G.I. Nipple 6"

20 mm dia G.I. Nipple 6"

15 mm dia G.I. Nipple 6"

100 mm dia G.I. equal Tee

80 mm dia G.I. equal Tee

65 mm dia G.I. equal Tee

50 mm dia G.I. equal tee

40 mm dia G.I. equal tee

25 mm dia G.I. equal tee

20 mm dia G.I. equal tee

15 mm dia G.I. equal tee

20x20x15 mm dia G.I. Tee

25x25x20 mm dia G.I. Tee

40x40x25 mm dia G.I. Tee

50x50x40 mm dia G.I. Tee

65x65x50 mm dia G.I. Tee

80x80x65 mm dia G.I. Tee

20x15 mm dia Socket/ Reducer

25x20 mm dia Socket/ Reducer

40x25 mm dia Socket/ Reducer

50x40 mm dia Socket/ Reducer

65x50 mm dia Socket/ Reducer

80x65 mm dia Socket/ Reducer

20x15 mm dia Elbow/ Reducer

25x20 mm dia Elbow/ Reducer

40x25 mm dia Elbow/ Reducer

50x40 mm dia Elbow/ Reducer

65x50 mm dia Elbow/ Reducer

80x65 mm dia Elbow/ Reducer

Providing & fixing of MS fittings viz bends of suitable degree, tees, collars etc to be fabricated from 6mm Nominal Size MS plate as per the requirement of site including cost of welding. The work should be leakproof and should be painted with anti corrosive red oxide primer. Complete Job.

Providing and fixing of Green shade Net for covering with all carraige complete.

Supplying of spun yarn at site

Providing refreshment to the partcipants of the Indenpadnace Day , Republic day or other official Functions complette job including packing at venue with following Menu.

Water Bottle One litre

Water Bottle 500 ml

Water bollte 250 ml

Juice pack/ tin 100 ml to 180 ml of Standard Quality

Boiled Egg

Biscuit standard Quality of 50 g

Dal 50 g Pac

Banana

Butter Toastes each pair

Toastes without Butter each pair

Tea Sugar each Cup

Tea Namkeen each Cup

Normal Chicken Biryani/fried rice one plate for person

Rice Plate with Dal , vegetables & curd for each person

Rice Plate with vegetables, Single piece meat & curd for each person

Disposable glass

Tissue paper

Hire charges of water dispensor incl. all sorts of carriages involved to & fro.

Supplying of 20 ltr water bottle for dispenser

Re-threading of damaged pipe ends including carriage from site to workshop and back.

20 mm dia

25 mm dia

40 mm dia

50 mm dia

65 mm dia

80 mm dia

Dismentalling of backwash motors/ Alum motors/ bleaching motors of filtration plants by way of rewinding of core made out of copper metal fiber superior type of required thickness and guage. The job includes replacing of bearings, water seal, nuts, bolts, rubber washers and painting of instruments. The job also includes all sorts of carriage from site to work upto workshop to & fro including testing & commissioning of following capacity and shall be paid as per actual details at site.

For 0.50 HP to 2.00 HP

For 3.00 HP to 5.00 HP

For 5.00 HP to 10.00 HP

Dismentalling of complete reduction gear unit of de-sludge bridges for repairs by way of providing & manufacuring of complete reduction gear with hub. The job includes costing of brass material, grinding & finishing of virme in order to make the new teeth, replacement of damaged oil seals by way of new one, replacemnet of ball bearings, pouring of required specific gravity ear oil in order to run the reduction gear in smooth order, refixing of same at the site of work incld. all sorts of carriage fro site of work upto workshop and back to site of work including testing & successful commissioning (complete job)

Overhauling voltage stabilizers installed at site. The job includes pouring / filling of transformer oil of required specified gravity, replacement of driven rotars (automatic), replacement of voltage meters, Amp meters, indicators, thimbles etc. complete job, making the unit complete functional for bearing of required load. The job also includes labour charges, cost of wiring, pin sockets and all sorts of carriages from site of work upto the workshop & back to actual site of work incld. installation at site & testing, successful commissioning complete job.

5 KV to 10 KV

10 KV to 20 KV

Desilting of various structures incld. Disposal of desilted material from site premises with all carriages lead & lifts etc. The job also includes, washing and cleaning of walls, beds, drains and floor etc with bleaching powder solution incl. hire charges of all T&P complete job.

Dismantling old plaster or skirting, raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 meters lead.

Demolishing cement concrete manually/by mechanical means including disposal of material within 50 meters lead as per direction of Engineer-incharge: 1:3:6 or richer mix (i/c equivalent design mix)

Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size)

Providing and laying in position specified grade of reinforced cement concrete including curing but excluding the cost of centering, shuttering, finishing and reinforcement. All works upto plinth level: 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size)

Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size)

Reinforced cement concrete work in walls (any thickness) including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts upto floor five level including curing but excluding cost of centering shuttering, finishing and reinforcement 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size)

Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15°, landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto five level including curing but excluding the cost of centring, shuttering, finishing and reinforcement with 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size)

Providing and laying cement concrete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchors blocks, plain window sills, fillets etc upto floor V level, including curing but excluding the cost of centring, shuttering and finishing with 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size)

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level:Thermo-Mechanically Treated bars of grade Fe-500D or more.

Cement concrete flooring 1:2:4 (1cement: 2 coarse sand: 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry and curing complete, but excluding the cost of nosing of steps etc. complete. 50 mm thick with 20mm nominal size stone aggregate.

Replacement /Providing/fixing of PVC gate valves for bleaching / alum tanks/ Foot valves and PVC pipes of ISI marked standard make incl cost of all fittings required and carriage complete.

20 mm dia Gate valve

25 mm dia Gate valve

32 mm dia Gate valve

40 mm dia Gate valve

50 mm dia Gate valve

20 mm dia PVC pipe (B-class)

25 mm dia PVC pipe (B-class)

32 mm dia PVC pipe (B-class)

40 mm dia PVC pipe (B-class)

50 mm dia PVC pipe (B-class)

Replacement of old damaged G.I. Gate valves by way of new Gate valves of reputed make including cost of nuts, bolts, rubber insulations of ISI marked standard make incl. all carriages upto site of works, complete.(The unserviceable material shall be returned to Divl. store under proper R.I)

100 mm dia Gate valve

80 mm dia Gate valve

65 mm dia Gate valve

50 mm dia Gate valve

40 mm dia Gate valve

25 mm dia Gate valve

20 mm dia Gate valve

Providing and fixing D.I. sluice valves (with cap) complete with bolts, nuts, rubber insertions etc.incl. all sorts of carriages involved complete. (the tail pieces if required will be paid separately). Confirming to IS:14846 read with latest amendments.

80 mm dia. Class 1

100 mm dia. Class 1

125 mm dia. Class 1

150 mm dia. Class 1

200 mm dia. Class 1

250 mm dia. Class 1

Fixing charges of Sluice Valves including Testing, Commissioning and carriages from divisional store to actual site of work, Complete job

200 mm dia

150 mm dia

100mm dia

80mm dia

50mm dia

Carriage of material from divisional store up to dumping site of work, including loading, unloading and stacking etc. complete by Mechanical Transport

Cement & steel, G.I/C.I pipe avg. lead upto 01 Kms

Cement & steel, G.I/C.I pipe avg. lead upto 02 Kms

Cement & steel, G.I/C.I pipe avg. lead upto 03 Kms

Cement & steel, G.I/C.I pipe avg. lead upto 04 Kms

Cement & steel, G.I/C.I pipe avg. lead upto 05 Kms

Cement & steel, G.I/C.I pipe avg. lead beyond 5 Kms upto 10 Kms (per Km)

Cement & steel, G.I/C.I pipe avg. lead beyond 10 Kms upto 20 Kms (per Km)

Cement & steel, G.I/C.I pipe avg. lead beyond 20 Kms per additional Km

Sand & Agg. 20 mm avg. lead of upto 01 Kms

Sand & Agg. 20 mm avg. lead upto 02 Kms

Sand & Agg. 20 mm avg. lead upto 03 Kms

Sand & Agg. 20 mm avg. lead upto 04 Kms

Sand & Agg. 20 mm avg. lead upto 05 Kms

Sand & Agg. 20 mm avg. lead beyond 5 Kms upto 10 Kms (per Km)

Sand & Agg. 20 mm avg. lead beyond 1

0 Kms upto 20 Kms (per Km)

Sand & Agg. 20 mm avg. lead beyond 20 Kms per additional Km

40 mm Agg. avg. lead of upto 01 Km

40 mm Agg. avg. lead upto 2 Kms

40 mm Agg. avg. lead upto 3 Kms

40 mm Agg. avg. lead upto 4 Kms

40 mm Agg. avg. lead upto 5 Kms

40 mm Agg. avg. lead beyond 05 Kms upto 10 Kms (per Km)

40 mm Agg. avg. lead beyond 10 Kms upto 20 Kms (per Km)

40 mm Agg. avg. lead beyond 20 Kms per additional Km

Carriage of material from dumping site to actual site of work, including loading, unloading and stacking etc. complete by manual labour

Cement for an avg. lead upto 50 mtr.

Cement for an every additional lead of 50 mtrs or part thereof beyond 1st 50 mtrs.

Steel for an avg. lead upto 50 Mtr

Steel for an every additional lead of 50 mtrs or part thereof beyond 1st 50 mtrs.

Pipe for an avg. lead upto 50 Mtr

Pipe for an every additional lead of 50 mtrs or part thereof beyond 1st 50 mtrs.

Sand & Agg.20mm for an avg. lead upto 50 Mtr

Sand & Agg.20mm for an every additional lead of 50 mtrs or part thereof beyond 1st 50 mtrs.

40mm Agg. for an avg. lead upto 50 Mtr

40mm Agg. for an every additional lead of 50 mtrs or part thereof beyond 1st 50 mtrs.

Centering and shuttering including strutting, propping etc. and removal of form for:

Foundations, footings, bases of columns etc. for mass concrete.

Walls (any thickness) including attached pilasters, buttresses, plinth and string courses etc.

Columns, pillars, piers, abutments, posts and struts.

Suspended floors, roofs, landings, balconies and access platforms.

Lintel, beams, plinth beams, girders, bressumers and cantilevers.

Clearing snow (without frost) from roads manually.

Snow depth upto 150 mm

Snow depth over 150 mm but upto 250mm

Snow depth over 250 mm but upto 350mm

Snow depth over 350 mm but upto 450mm

Snow depth over 450 mm but upto 550mm

Snow depth over 550 mm but upto 650mm

Snow depth over 650 mm but upto 750mm

Snow depth over 750 mm but upto 850mm

Snow depth over 850 mm but upto 950mm

Snow depth over 950 mm but upto 1050mm

Snow depth over 1050 mm but upto 1150 mm

Clearing snow avalanche mixed with frost and compressed snow, including all types of equipments and safety to the workers while clearing the avalanches at head site

Supply of fire wood / rejection wood incld. all carriages upto site of work, complete

Dismantling manually/ mechanically including stacking of serviceable material and disposal of unserviceable material within 50 meters lead as per direction of Engineer-in-charge: Water bound macadam road

Supplying/laying of GSB/ nallah muck incl. spreading, placing in position and all sorts of carriages involved.complete.

Renewing glass panes, with wooden fillets wherever necessary : Float glass panes of thickness 4.0 mm (weight not less than 10kg/sqm)

Repairs / replacement of water closet / flushing cistern including necessary controlled device incld. replacement of accessaries etc. incl all carrages complete job

Surface dressing of the ground including removing vegetation and in-equalities not exceeding 15 cm deep and disposal of rubbish, lead upto 50 m and lift upto 1.5 m in -All kinds of soil.

Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with:1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size)

Structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.

Providing corrugated G. S. sheet roofing including vertical/curved surface fixed with polymer coated J or L hooks, bolts and nuts 8mm diameter with bitumen and G.I limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (upto any pitch in horizontal/vertical or curved surface)excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. 0.50 mm thick with zinc coating not less than 275 gram/m2

Providing ridges or hips of width 60cm overall width plain G.S. sheets fixed with polymer coated J. or L hooks, bolts and nuts 8mm dia G.I. limpet and bitumen washers complete. 0.50 mm thick with zinc coating not less than 275 gram/m2

Dismantling roofing including ridges, hips valleys and gutters etc., and stacking the material within 50 meters lead of : G.S. Sheet

Supply of unskilled labours

Supply of skilled labour

Hire charges of Welding machine with welder, gen set & helper including cost of electrods etc for welding of M.S Sheets , GI/ DI pipes etc including all carriages to & fro comp job.

Providing and Fixing of M.C.C.B.of ISI marked standard make the job includes dismantling of damaged/non functional Amp. M.C.C.B. and fixing of new one including all sorts carriage from source to workshop including carriages of salvaged material from filtration plant upto Divisional Stores including testing, installing and commissioning complete job

03 Pole 200 Amp.

03 Pole 100 Amp.

04 Pole 100 Amp.

04 Pole 32 Amp.

Providing and Fixing of 7.5 H.P. Starter of ISI marked standard Make, the job includes dismantling of damaged /non functional starter and fixing of new one incl. all sorts of carriages from source to workshop including carriages of salvaged materials from filtration plant upto Divisional Stores, including testing, installing and commissioning complete job.

150mm dia class-I

Providing and Fixing of running V-Belt of groove type for air blower, the job includes dismantling damages ones and fixing of new ones incl. successful testing, commissioning. All types of carriage complete

200mm dia

150mm dia

100mm dia

80mm dia

65mm dia

Restoration of damaged pipes due to frost / frozen including earth works excavation /dismantling /refilling / making good the same complete job in all respects. Upto 20mm to 100mm dia by using blue lamp including cost of K.oil)

P/F of Air Releasing Valves (single acting) including cutting of bore hole , welding of the pedestal rod and providing laying of cement concrete 1:3:6 mix with shuttering box PGI 9”X9”x12” around the pedestal rod with all carriages and head load upto actual site of work

25mm dia Air Valve

20mm dia Air Valve

Hire charges of Hydraulic Excavator (JCB) with operator for emergent works during floods, frost or heavy rains as and when needed incl. operational charges and fuel for working hours involved.

Removal of dead animals from off take points including disposal within 50 mts comp job

Filling empty cement bags with sand/ earth; including cost of sewing and strings; incl. cost of bags, Loading/Unloading sand/ earth filled bags lead upto 50m.( Earth or sand to be locally excavated within 50 Mts head load) incl. placing in position and all leads/ lifts complete.

Silt clearance from canals. Inclusive of initial lead and lift ( 50m & 1.5m respectively):

Slip clearance in ordinary soils disposal lead upto 50 m and lift upto 1.5 m

Silp clearance in soils; mixed with moorum/Kankar/shingle/boulders; disposal lead upto 50 m and lift upto 1.5 m

Supplying/laying of filter media from approved source Ganderbal duly screened, washed / sieved conforming to approved standards/specifications and laying in filter beds as per required grades including all carriages by Mechanical transport / head load what so ever involved upto site of work as directed by Engineer-in-charge complete job.

Providing/spreading of salt to be used during frost days

incl. all carriages complete.

Repairing of Damaged 100KVA / 63 KVA oil filled transformers installed at site including replacement of worn out / damaged accessories and filling with fresh T-oil in place of old carbonised T-oil. The job also includes Skilled / unskilled labour charges and all sorts of carriages from site of work upto the workshop & back to actual site of work including uninstallation & installation at site & testing, successful commissioning complete job

HV Coils

LV Coils

Lethoride Paper

HT Insulation Paper

Hard Card Board

Glass Sleeves

Fiber Tubes

LT Bush Rods

HT Bush Rods

HT Bush

LT Bush

AI Thimble

Cotton tape/ Nawar

cork washers

Oil Seals

Cork Sheet

Insulating gum

Nuts & bolts

Clamps

Insulated cable 10mm ( Service line)

Insulated cable 16mm ( Service line)

Supplying/laying of Pea size Garvel from approved source Ganderbal duly screened, washed / sieved conforming to approved standards/specifications including all carriages by Mechanical transport / head load what so ever involved upto site of work as directed by Engineer-in-charge complete job.

Supplying/installation/testing & commisioning of Desludge motor (7.5 HP-80mm) 3-phase of Reputed/Standard Make incl. all sorts of carriages involved.complete job.

Supplying/installation/testing & commisioning of 3 HP motor of Reputed/Standard Make incl. all sorts of carriages involved.complete job.

Supplying/installation/testing & commisioning of 4 HP motor of Reputed/Standard Make incl. all sorts of carriages involved.complete job.

Providing and carrying out wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required. (excl. cost of conduit)

Providing and fixing bolts including nuts and washers complete.

Supplying,laying and spreading of thick polythene sheets for protection of water leakage at head sites/offtake points during lean discharge incl. all sorts of carriages involved complete.

Providing and fixing C.I. sluice valves (with cap) complete with bolts, nuts, rubber insertions etc. (the tail pieces if required will be paid separately).

100mm dia class-I

125mm dia class-I

Supplying of electrodes of approved make (ISI marked) for departmental welding machine.

Supplyying/installation of foldable & reusable Canopy Box type stall with JJM logo for laboratory staff during various programmes (Block Divas,B2V,VBSY etc) incl. all carriages complete.

Providing and laying of armoured cable 95mm, 3.5 core for main service line of reputed make in P.V.C pipes of required dia to accommodate the service line including bends etc. including copper thimbles, earth work excavation and filling for laying of cable complete.

Supply & installation of white board of required size with eassel & pointer incl. all carriages complete.

200mm dia class-I

Providing fixing & commissioning of 10 mm thick Flanges in pairs including welding, cutting of threaded portion, washers including cost of Flanges with Nuts and Bolts including making joint leak proof including all sorts of labours whatsoever and carriages required .complete job

Clearing grass and removal of the rubbish upto a distance of 50 m outside the periphery of the area cleared.

Constructing vertical bunds with sloping faces, by boulder filling (dry, hand packed tightly); including cost of stones but excluding cost of wirecrates

Hand Packing stones in wire Crates excluding cost of crates and stones

Extra for additional lift of 1.5 m or part thereof 1.5m height for hand packing of stones in wire crates

Random Rubble masonry with hard stone in foundation and plinth including leveling up with cement concrete 1:6:12 (1 Cement : 6 coarse sand : 12 graded stone aggregate 20mm nominal size) upto plinth level and curing complete with:Cement mortar 1:6 (1 Cement : 6 coarse sand) (Nallah)

Supply of wire crates including carriage etc complete