Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L-1₹86.1 LAccepted-Finance HIMACHAL PRADESH | ₹86.1 L | L-1 | Accepted-Finance Lowest-1 |
| 2 | L-2₹88.8 LRejected-Finance VILL SAKRAH PO CHAMBI TEHSIL SUNDERNAGAR DISTT MANDI HP | SUNDERNAGAR | MANDI | HIMACHAL PRADESH | ₹88.8 L | L-2 | Rejected-Finance Lowest-2 |
| 3 | L-3₹1.0 CrRejected-Finance CHITRAKALA ART STUDIO GALLERY DREAMLAND JAKHU ROAD SHIMLA 171001 H P | SHIMLA | SHIMLA | HIMACHAL PRADESH | 171001 | ₹1.0 Cr | L-3 | Rejected-Finance Lowest-3 |
| Sl No | Description | Qty | Unit | Kartike Guleria L1 | DINESH KUMAR L3 | KUSHAL SINGH RAGHAV L2 |
|---|---|---|---|---|---|---|
| 1.00 | Excavation in foundation and trenches etc. in earth work in all kind of soils such as pick work jumper work,saturated soil including blasting soft/hard rock, chiseling soft/hard rock where blasting is prohibited in all lifts including trimming and dressing of sides, levelling of bed, stacking the excavated soil clear from the edge of excavation and then returning the excavated soil in 15cm. layers when required into plinths,side of foundations etc including consolidating each deposited layer by ramming , watering and then disposing of all surplus excavated soil as directed in all leads & lifts and shoring strutting, timbering where ever required as per direction & best satisfaction of the Engineer-in-Charge. | 1,877.14 | Cum | 395 ₹7.4 L | 425 ₹8.0 L | 355 ₹6.7 L |
| 2.00 | Dismentalling of GMS/MSERW tube in Common Header, Suction Pipes, Syphon pipe various dia's with in all leads and lifts and to the entire satisfaction of Engineer-in-Charge. | 660 | Cum | 270 ₹1.8 L | 275 ₹1.8 L | 295 ₹1.9 L |
| 3.00Providing , laying,jointing (by way of circumfrential butt welded joints by electrical arc welding) and testing of MSERW pipe of following dia meters confirming to BIS 3183-2007, steel grade specified below (latest with upto date amendments) having wall thickness as specified below with bevelled ends and capable of withstanding required test pressure in a random length of 4 to 7 meters, including manufacturing reducers/ tapers , all short pieces, beds etc. as per site requirement made from parent tubes . The laying of pipe will include all operation such as cutting, welding, jointing, fabrication of bends, tees etc. including lowering and laying in excavated trenches to ensure required level including flushing, cleaning and hydraulic testing complete in all respects to the satisfaction of the Engineer in charge. The fabricated bends shall have three or four cuts having its radius not less than five times the dia of pipe. The pipes shall be factory galvanized (zinc coating both inside and outside) as per relevant IS standards. The welding electrodes shall be as per IS 814 of Advani Oerlikon/ L&T or ISI marked make. The rates also includes entire carriage of material, flushing, cleaning & hydraulic testingcomplete in all respect with in all leads & lifts as per the entire satisfaction & directions of Engineer-in-Charge. (Earth work in trenches will be measured and paid for separately). | ||||||
| 3.01 | 150 mm dia wall thickness 4.00 mm | 210 | Rmt | 2,400 ₹5.0 L | 2,910 ₹6.1 L | 2,455 ₹5.2 L |
| 3.02 | 200 mm dia wall thickness 4.00 mm | 240 | Rmt | 3,050 ₹7.3 L | 4,200 ₹10.1 L | 3,155 ₹7.6 L |
| 3.03 | 250 mm dia wall thickness 4.00 mm | 320 | Rmt | 3,900 ₹12.5 L | 5,500 ₹17.6 L | 3,895 ₹12.5 L |
| 3.04 | 300 mm dia wall thickness 4.40 mm | 60 | Rmt | 5,500 ₹3.3 L | 7,300 ₹4.4 L | 5,395 ₹3.2 L |
| 4.00Providing & welding MS Flanges joints, conforming to following tables as per IS 6392-1971 with plane end MS Pipe in three no. of layers on both faces to make the joint leak proof (cost of pipe & L/J of pipe to be measured & paid for separetely ). The welding should confirm to IS 816-1969 with elctrode with IS 814-1991 & Jointing of Flanges should be with required no. of nuts & bolts conforming to IS 1364 including cost of gasket, nuts and bolts. The gasket should not be less than 3 mm conforming to IS 2712-1998. The work should be done to the best satisfaction & direction of Engineer in charge complete in all respect with in all leads & lifts. | ||||||
| 4.01 | 150 mm dia Flange Table-17 | 18 | Nos. | 2,300 ₹41,400 | 3,000 ₹54,000 | 2,895 ₹52,110 |
| 4.02 | 200 mm dia Flange Table-17 | 12 | Nos. | 3,300 ₹39,600 | 5,100 ₹61,200 | 4,095 ₹49,140 |
Tender Value
₹1.2 Cr
EMD Value
₹1.9 L
Closing Date
7 May 2026, 10:00 amClosed
EE
Executive Engineer JS Division Baggi Distt. Mandi H.P.
as per BOQ
2026_HPIPH_135221_1
EE-JSD-BGI/2026- 2498-2548 dt. 27/04/2026
Open Tender
Civil Works
180 days
Baggi
as per NIT
6 documents required · 6 mandatory
₹5,000
₹1.9 L
Yes
13 May 2026
28 Apr 2026
7 May 2026
28 Apr 2026
7 May 2026
28 Apr 2026
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Excavation in foundation and trenches etc. in earth work in all kind of soils such as pick work jumper work,saturated soil including blasting soft/hard rock, chiseling soft/hard rock where blasting is prohibited in all lifts including trimming and dressing of sides, levelling of bed, stacking the excavated soil clear from the edge of excavation and then returning the excavated soil in 15cm. layers when required into plinths,side of foundations etc including consolidating each deposited layer by ramming , watering and then disposing of all surplus excavated soil as directed in all leads & lifts and shoring strutting, timbering where ever required as per direction & best satisfaction of the Engineer-in-Charge. | 1,877.14 | Cum | - | - |
| 2 | Dismentalling of GMS/MSERW tube in Common Header, Suction Pipes, Syphon pipe various dia's with in all leads and lifts and to the entire satisfaction of Engineer-in-Charge. | 660 | Cum | - | - |
| 3Providing , laying,jointing (by way of circumfrential butt welded joints by electrical arc welding) and testing of MSERW pipe of following dia meters confirming to BIS 3183-2007, steel grade specified below (latest with upto date amendments) having wall thickness as specified below with bevelled ends and capable of withstanding required test pressure in a random length of 4 to 7 meters, including manufacturing reducers/ tapers , all short pieces, beds etc. as per site requirement made from parent tubes . The laying of pipe will include all operation such as cutting, welding, jointing, fabrication of bends, tees etc. including lowering and laying in excavated trenches to ensure required level including flushing, cleaning and hydraulic testing complete in all respects to the satisfaction of the Engineer in charge. The fabricated bends shall have three or four cuts having its radius not less than five times the dia of pipe. The pipes shall be factory galvanized (zinc coating both inside and outside) as per relevant IS standards. The welding electrodes shall be as per IS 814 of Advani Oerlikon/ L&T or ISI marked make. The rates also includes entire carriage of material, flushing, cleaning & hydraulic testingcomplete in all respect with in all leads & lifts as per the entire satisfaction & directions of Engineer-in-Charge. (Earth work in trenches will be measured and paid for separately). | |||||
| 3.01 | 150 mm dia wall thickness 4.00 mm | 210 | Rmt | - | - |
| 3.02 | 200 mm dia wall thickness 4.00 mm | 240 | Rmt | - | - |
| 3.03 | 250 mm dia wall thickness 4.00 mm | 320 | Rmt | - | - |
| 3.04 | 300 mm dia wall thickness 4.40 mm | 60 | Rmt | - | - |
| 4Providing & welding MS Flanges joints, conforming to following tables as per IS 6392-1971 with plane end MS Pipe in three no. of layers on both faces to make the joint leak proof (cost of pipe & L/J of pipe to be measured & paid for separetely ). The welding should confirm to IS 816-1969 with elctrode with IS 814-1991 & Jointing of Flanges should be with required no. of nuts & bolts conforming to IS 1364 including cost of gasket, nuts and bolts. The gasket should not be less than 3 mm conforming to IS 2712-1998. The work should be done to the best satisfaction & direction of Engineer in charge complete in all respect with in all leads & lifts. | |||||
| 4.01 | 150 mm dia Flange Table-17 | 18 | Nos. | - | - |
| 4.02 | 200 mm dia Flange Table-17 | 12 | Nos. | - | - |
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.47 MB
FORM6.pdf
Tender Documents • 0.45 MB
TC.pdf
Tender Documents • 0.27 MB
BOQ_200275.xls
BOQ • 4.54 MB
Download all tender documents and submit your bid