CERTAIN PROVISION WORKS AS PROVN OF NIGHT PICKET FOR (01X OR AND 03X NCO) 1821 MEDIUM REGT (MECHANISED INFANTRY BATTALION) LOCATION AT TELIPARA 2, ROVN OF TRG SHED OF 20 MDSR, AND CONNECTION OF WATER PIPE LINE BETWEEN ENGR SQN/SIG COY AT TELIPARA

Amount

Schedule 'A'

Surface dressing n.exc (not exceeding) 15cm deep and getting out in Soft/loose soil complete all as specified and directed.

Excavating in trenches, n exc 1.5m wide and n exc 1.5m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5m in depth and getting out in Soft/loose soil complete all as specified and directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm in soft/loose soil complete all as specified and directed .

Removing excavated material (soil) exc. 50m and not exc 100m depositing where directed at a level n exc. 1.5m above the starting point complete all as specified and directed by Engr-In-Charge.

M&L for PCC in cement concrete in foundation/pole filling and mass concrete type D-2, 1:4:8 using 40mm graded aggregate as in foundation complete all as specified and directed.

M&L for brick works with fly ash bricks straight or curved on plain exc 6m mean radius built in cement mortar 1:6 complete as directed.

M&L for 15mm thick rendering in cement mortar (1:4) on fair faces of brick walls or concrete surfaces in mixed with water proofing compound by weight of cement or as per manufacturer instructions, finished even & smooth without using extra cement all complete as specified and as directed

M&L for water proofing compound

M&L for rendering 15 mm thick cement plaster on other than fair surfaces of brick work in cement mortar (1:6) complete all as specified and as directed.

M&L for for preparation of newly wall plastered surfaces and applying three coats of colour wash on wall as specified as diracted.

M&L for for preparation of newly wall plastered surfaces and applying two coats of OBD over a coat of putty on wall as specified as diracted.

M&L sand filling under floors filling 50mm hick

M&L for Hardcore of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surfacecomplete all as specified and directed .

M&L non - skid Ceramic coloured tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15 mm thick screed bed in cement mortar1:6 complete all as specified.

M&L for 25mm thick pre-polished and chemically treated smooth finish exterior grade coloured chequered tile as in path including 15 mm thick screed bed in cement mortar1:6 complete all as specified and directed. Make:Multiwin/Hindusthan pipe Industries(Novely Brand) or equivalenet brand.

M&L for glazed ceramic coloured tiles 350x250x7/450x350x7mm thick for work on vertical surface such as skirting, dado, set & jointed in cement slurry and pointed in white or coloured cement to match with 10mm thick rendering in CM (1:4) as rough surface on vertical surfaces as backing coat of wall tilescomplete all as specified and as directed.

M&L for 75 mm thick cement concrete 1:3:6 type C-2 using 40 mm graded stone aggregate in plinth protection finished fair and even without using extra cement including forming necessary joints 12 mm wide to the full depth of PCC at every 3 metres and every change of direction and filling the same with & including bitumen and sand 1:3 by weight of grade 'A' complete with and including necessary form work etc complete all as specified and as directed.

S&F 1000 ltrs capacity rotaional moulded polythelene water storage(cylindrical vertical with closed top) hoisted and fixed in positions all specified in SSR Part I

S&F ball valves of 20mm bore high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe & fixed (Minimum weight 20 gms-210 gms)

S&F of Tubes, medium grade, 15mm bore, galvanised, with all fittings and fixed complete to wall and ceilings or laid in floors complete.

S&F of Tubes, medium grade, 20 mm bore, galvanised, with all fittings and fixed complete to wall and ceilings or laid in floors complete.

S&F in repairs 15mm dia fancy type Bib taps, chromium plated cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete

S&F 15 mm dia CP cast copper alloy angle cock screwd for iron pipe and fixed

S&F 15mm dia fancy type long shunk concealed Stop valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed

S&F 10 ltr capacity PVC flushing cistern low level white colour with inlet ball valve float and handle including brackets incl PVC connection 450 mm long, PVC flush pipe of reqd length ,and connections to pipe etc complete all as specified and directed

S&F vitreous china squatting pan"Orissa" pattern size 580x440mm white with intgeral foot rests(excluding flushing cistern and flush pipe) with 'P' or 'S" trap fron or back inlet etc including connection to trap tand flushing pipe and provision of lime concrete bedding complete all as specified and as directed in repairs including demolition of existing one

S & F vitreous China Ware Wash hand basin white, flat back, size 550 x 400 mm size including CP waste coupling, cutting for and pinning ends of brackets or erecting stand.

Supply & fixed Vitreous china urinal bowl type flat back size of 465x355x265 mm white (minimum) with grating and union for discharge pipe (excl flushing cistern, flush pipe and waste pipe).

S&F 15 mm bore pillar taps, capstan head, cast Copper alloy, chromium plated, screwed down high pressure with or without lettered ‘HOT’ or ‘COLD’ long screwed shanks and fly nuts, screwed for iron pipe complete all as specified and directed.

S&F in repair MS CP towel rail 600 mm long complete all as specified and directed.(Make -Prayag/Marc/Essco/Jaquar).

S&F PTMT shelf fixed with & incl chromium plated brass screw and wooden/plastic cleats(min wt 300 gms)

S&F PVC connection pipe 15mm size with P&T nuts of length 450mm

S&F in repair swivel shower of brass CP with shower arm 125 mm size for fixing with 15 mm bore GI pipe complete all as specified and as directed (Make -Prayag/Marc/Essco/Jaquar).

S&F 110 mm bore PVC (SWR) pipes single sockets in any length with rubber ring joints fixed to wall or laid in floor including packing under and haunching against the sides of the pipes with PCC (1:3:6) type C-2 with using 40 mm graded stone aggregates of sewer pipe lines:- complete all as specified and as directed.

S&F PVC(SWR) 110 mm bore bends, diminishing pieces or tapers complete all as specified and as directed.

S&F of PVC (SWR) floor trap, plain with CP grating including jointing with solvent cement outer dia 75 mm cement concrete (1:2:4), type B1 including complete all as specified and as directed.

S&F steel work in tubular trusses MS pipes in vertical column,parlins including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to IS-1161 of 1979 grade st 240 with one shop coat complete all as specified and directed .

S&F Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified and directed.

S&F of pressed steel framed for door with one or more rebates including necessary fixing lugs, hinges, lock strike plates, size of frame 125 X 60 mm,and making good disturbed surface of wall all as specified and as directed.

S&F 30 mm thick flush shutter, solid core construction with block board case & plywood face panels commercial type on both side complete all as specified and directed.

S & F 35 mm thick 2nd class hard wood glazed and skeleton shutter , open rebated and prepared to receive glass, gauze, etc 9without sash bars), edges of framing plain, chamfered rounded, fitted with cut and mitred beads for securing glass, etc sizes of members of shutters as specified in SSR part I, Section 8, clause 8.24 (a) supplied and fitted to chowkats.

S&F for solid PVC door frame of size 50x47mm made out of 5mm thick plain colour PVC sheet reinforced with MS square tube, supplied and fixed incl fixing of hold fast as per specification and drawing complete as directed.((Make-M/s Rajshri Plastiwood Ltd/ M/s Sintex India Ltd / Marino)

S&F for factory made solid pannel PVC Moulded door shutters 28 to 30mm thick (stiles) with 2,4,6 raised panel design with 4 mm thick moulded PVC Sheet on the front face & 4 mm plain colour PVC sheet on the back face supplying and fixing in frame at site as per specification & drawing all as specified (Make-M/s Rajshri Plastiwood Ltd/ M/s Sintex India Ltd / Marino)

S&F 100 mm long stainless steel butt hinges complete all as specified and directed.complete all as specified.

S&F 150 mm long Aluminium anodised barrel tower bolts complete all as specified and directed.

S&F 150 mm long aluminium anodised door handles complete all as specified.

S&F Aluminium alloy anodised sliding door bolt 250 mm long with hasp & staple (bolt type) and fixing clips of sheet cast or extruded section and fixing bolts and sliding bolts of extruded section

S&F factory made steel windows with side hung shutters including projecting type hinges with steel handle and steel peg stay complete with glazing bars docetailed or welded complete all as specified and as directed

ditto all asper item 49 but with out glazing bars

S & F of mild steel work such as window guard bars and similar work conforming to Fe – 290 Grade – E 165 complete all as specified and directed.

M&L for preparation of new steel surfaces of any description over 10cm in width or girth not otherwise described applying two coats of synthetic enamel paint over a coat of red oxide complete all as specified and directed.

M&L for preparation of new wooden surface of any description over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of wood primer.

S&F in 3 mm thick sheet glass ordinary quality and glazing with oil putty or wooden beads in square n.exc 0.5 Sqm in each pane complete all as specified and as directed.

S&F stainles steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel staples

S&F of 4mm thick 'E' classic designer board false ceiling with powder coated GI snap grid frame work of grid size 600 x 600 mm complete all as specified and directed including all necessary drilling and necessary arrangement to fix items as under :- (a) 27x27x0.55 mm thick GI angle powder coated duly plugged @ 600mm centre to centre alongwith perimeter of wall. (b) 25x25x0.55 mm thick GI tee powder coated as main and cross runners suspended with 1.6mm dia GI wire suspenders (n.exe 1.2 mtr length) with adjustable clamps and dash true fastners plugging in RCC slab/wooden truss/A.I Runner of slopped roof placed @ 600mm centre to centre from perimeter of wall. (c) Fixing of 4mm thick AC "E" Classic designer board of approved texture and finished complete. Note. The complete ceiling work shall be done as per manufactures instruction and as directed.

S&F TMT bars 10mm dia and over cut to length, bent to shape required including cranking, bending and binding wire(annealed) not less than 0.9mm dia comple.

S&F 8 mm dia bars as in stirrups, spacers

M&L RCC type B-1, 1:2:4 (20mm graded BT stone aggregate) in lintel beam,chajja including necessary form work complete all as specified and as directedd

M&L for PCC for concrete bed to drain pipe , 200 mm bore pipe including packing and under hunching against the sides of pipe after they are laid and tested in PCC (1:3:6) type C-2 using 40 mm graded stone aggreagate complete all as specified and directed.

M&L for 150 mm bore grade 'A' SGSW drain pipe laidin trenches and jointed in cement ,mortar (1:1) complete all as specified.

M&L for RCC Type B-1,M-20 (1:1.5:3) (20 mm graded aggregate) in Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete complete all as specified.

M&L for RCC Type B-1, M-20 (1:1.5:3) (20 mm graded aggregate) in Beams, cantilevers, bressummers, lintels over 1.5m span complete all as specified.

M&L RCC Type B1 M-20 (1:1.5:3) (20 mm graded aggregate) in Columns, pillars, piers, posts and struts

M&F Formwork flat fair finished to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter complete all as specified.

M&L Formwork square, rectangular or plougonal fair finished surfaces to sides of pillars, posts, struts, piers, columns and stanchions complete all as specified.

M&L Formwork flat fair finished surfaces to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc. complete all as specified and as directed.

M&L for preparation new plaster surfaces of wall and applying 1 mm wall care putty and two coats of weather coat paint complete all as specified and as directed.

M&L for 100 mm thick cement concrete type B1, 1:2:4 (20mm graded aggregate) as in flooring of floor etc and finished the spike rolling for vehicle to move including making joints to the full depth of PCC at every 3 metres and at every change of direction and filling the same with & including bitumen and sand 1:2 by weight complete all as specified and as directed.

M&L for 100 mm thick cement concrete type C1 (1:3:6 ) Norminal mix as in subbase of floor etc and finished the complete all as specified and as directed.

M & L for forming 12mm thick Expansion joints filled with pre-formed bituminous filler and top 30mm primed and sealed with sealing compound, Grade ‘A’

S&F steel work in i.e. Truss bottom, top bend, sides, side supports, holding plates, posts and base plate for stud co;umn in rcc etc including special shaped washers etc complete using ERW or induction butt welded tubes conforming grade St-240 complete all as specified and as directed .

S&F angle iron, MS flat iron in wind ties and similar work confirming to Fe 410-0 or Fe 310-0.complete all as specified and as directed.

S&F Pre- painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified complete all as specified and as directed.

S& F of Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified

S&F for Ductile Iron pipes with spigot and socket ends ,Rubber gas kit as per IS- 8329 (2000),internal lining with cement mortor class K-7 in any length laid in trenches including all necessary fittings such as bend, reducer,tee socket etc all as specified and directed. (a) Nominal dia 100mm

S & F DI pipe fitting such as bend, reducer , socket, Tee etc of various size.

Supply and fix CI sluice valve Cast iron PN-1.6 flanged end conforming to IS -14846 with CI wheel, brass spindle, chuck nuts, rubber gasket, bolts (full threded), nuts & washers including joints for the following sizes complete all as specified and directed including dismantling and taking down of old unserviceable CI Sluice valve from existing position. (Make : Hazara/Upadhyay) :- (a) Nominal 150mm dia

(b) Nominal 100mm dia

M & L for construction of new brick masonry valve pits of size 1200x1200x1200mm (internal dimension) with brick work in cement mortar (1:4) 40mmx40mm x6 mm angle iron frame ,MS handle 300mm long, bent to shape and riveted to MS sheet including excavation and earth work, concrete work 3.15 mm thick MS sheet cover with locking arrangement hinges and handle rendering work, painting to all steel surfaces with two coats red oxide primer complete and all as directed.

M&L point wiring with FRLSH PVC insulated unsheathed multistranded copper conductor,conforming to IS-694 of size 1.50 sqmm nominal cross sectional area single core drawn in and including 20/25mm size 'medium grade' PVC doubled lock Casing-Capping/PVC Conduit pipe and fittings, including, pressed steel concealed terminal switch boxes not less than 1.2mm thick of reqd size factory made duly painted inside and outside with two coats of black bituminous paint over one coat red oxide primer, 3mm thick Bakelite plastic laminated sheet top cover (ISI Marked) fitted with chromium plated brass screws & washers complete including 1.50 sqmm nominal cross sectional area PVC insulated unsheathed multistranded copper conductor green as earth wire connected to earth dolly with all accessories complete all as specified and directed. (a) One light point controlled by one way switch 5/6 amps.

(b) One ceiling fan/Exhaut fan point controlled by one way switch 5/6 amps.

(c) One 3 pin socket out let 5/6 amps point on the same board

(d) One 3 pin socket out let 5/6 amps independent board controlled by one way switch 5/6 Amps .

As per item no 84 here in above but copper conductor of size 2.5 sqmm for 15 amps socket on independent board complete all as specified and directed.

S&F switch piano type 5/6/ amps single pole one way single pole complete all as specified and directed

S&F socket outlet 2 in 1, 3 pin 5 amps complete all as specified and directed

S&F switch socket combination 2 in 1, 3 pin 5 and 15 amps flush type universal complete all as specified and directed

S&Fstepped type electronic fan regulator flush type complete all as specified and directed

S&F ceiling rose, bakelite, surface type, 220/240 volts, three terminals complete all as specified and directed.

S & F Wall monted slim LED batten 20W, with extruded aluminium housing, with integrated LED driver and 02 NOS of round/square PVC blocks for mounting of LED fitting on surface of wall including provn of flexible wire for connectin up complete all as specified and directed by Engr-in- charge.

S & F LED street light fittins 35 watt in aluminium PDC housing, toughned glass cover with IP66 protection complete all as spedified and as directed. (Make – Havells Cat No: ENDURAPEARLSL30WLED757SASYTOPCMP or equivalent in Philips, Bajaj, CG.

M&L for street light bracket made out of GI pipe light grade 25 mm dia 1.2 mtr length bent to shape and reduced to required size at top upto 1.2 mtr length by cutting, welding and well finishing including MS clamp of flat iron of size 25 x 5 mm suitable length 2 Nos complete with drilling hole, fixing with runts bolts and washers including painted with two coats aluminium paint over a coat of red oxide primer.

S&F Sheet metal enclosure for 8 way Distribution Boards (DB’s), double door, single pole & neutral with 200 amps rated bus bar, IP-20 protection suitable for fixing MCB"S/lsolators complete including taking down the old one complete all as specified and directed by Engr-in-Charge.

S&F MCB, Single pole & neutral 32 amps, 240 volts, ‘C’ curve, 10 KA all complete including taking down the old one complete all as specified and directed by Engr-in-Charge.

S&F MCB, Single pole, 5 to 32 amps, 240 volts, ‘C’ curve, 10 KA all complete including taking down the old one complete all as specified and directed by Engr-in-Charge.

M &L for Earthing complete with GI earth plate electrode 600x600x6mm thick buried directly in ground (Earth pit not less than 2.25M deep below normal ground level) with top edge of the plate not less than 1.5m below normal GL. Connected to galvanized earth lead wire 4mm dia by means of nut, bolt, check nut and washers including necessary excavation and earth work in soft/loose soil, GI protection pipe light grade 15mm bore for protecting the GI wire mesh funnel alternate layer of charcoal dust, and salt PCC pit 1:3:6 type C1 using 20mm graded stone aggregate and 50mm thick RCC 1:2:4 type BO using 20mm graded stone aggregate cover re-inforced with 8 mm dia MS TMT bars 80mm C/C both ways complete all as specified and shown in Electrical plate No.3 SSR part-1 and connected to the earth point and testing complete including taking out the old one complete all as specified and directed by Engr-in-Charge.

One ceiling fan complete with blade , down rod and accessories including provision of hook for hanging ceiling fan 230V , 1200mm sweep ,BEE star rated with bushless directed current (BLDC) complete all as specified and directed.

Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 16 sq mm 2 core all fixing and connecting accessories such as cable lugs, cable glands, nut, bolts, complete all as specified and as directed.

Supply and lay dry river sand filling for under ground cable protection with a layer of 8cm deep before laying and 15cm covering above the top edge of cable after laying complete all as specified and as directed.

Supply and laying sub class B bricks of size 25cmx12.5cmx7.5cm (+/-10% tolerance) for protection of UG cable with width equal to length of bricks as mechanical protection laid dry and flat complete all as specified and as directed.

N K Construction

M/s. MD IRSHAD