Construction of Open Auditorium cum Volley Ball Court And Renovation works at Alphonsa College Pala

Amount

Construction of Open Auditorium cum Volley Ball Court

2.8.1 Earth work in excavation by mechanical means (Hydraulic excavator) /manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.All kinds of soil

5.9.6 Centering and shuttering including strutting, etc. and removal of form for:Columns, Pillars, Piers, Abutments, Posts and Struts

4.1.3 Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:2:4 (cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size)

5.22.6 Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete upto plinth levelThermo - Mechanically Treated bars of grade Fe-500D or more

12.1.3 Providing corrugate G.S. sheet roofing including vertical/ curved surface fixed with polymer coated J or L Hooks, bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete ( up to any pitch in horizontal / vertical or curved surfaces), excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.0.63 mm thick with zinc coating not less than 275 gm/m2

10.16.1 Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete.Hot finished welded type tubes

od50569/2019_2020 Supplying and fixing 160mm dia 2.5 kg/cm pvc rain water gutter semi cicular section including fitting with 32mmx5mm MS flat support at 1.00m interval etc. complete

RENOVATION WORKS

Renovation of Existing Classrooms and Corridors 11.41.2 Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS : 15622, of approved make, in all colours and shades, laid on 20 mm thick cement mortar 1:4(1 cement : 4 coarse sand), including grouting the joints with white cement and matching pigments etc., complete.Size of Tile 600 x 600 mm.

Painiting Interior & Exterior . 14.43 Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete.

13.43.1 Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface:Water thinnable cement primer

14.53.1 Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade:One or more coats on old work

14.54.1 Painting with synthetic enamel paint of approved brand and manufacture of required colour to an give even shade:One or more coats on old work

Renovation of toilets . 9.117.1 Providing and fixing factory made uPVC door frame made of uPVC extruded sections having an overall dimension as below (tolerance ±1 mm), with wall thickness 2.0mm (±0.2 mm), corners of the door frame to be jointed with galvanized brackets and stainless steel screws, joints mitred and plastic welded. The hinge side vertical of the frames reinforced by galvanized M.S. tube of size 19 x 19 mm and 1 mm (± 0.1mm) wall thickness and 3 nos. stainless steel hinges fixed to the frame complete as per manufacturer's specification and direction of Engineer-in-chargeExtruded section profile size 48x40 mm

9.118.1 Providing and fixing to existing door frames24 mm thick factory made PVC door shutters made of styles and rails of a uPVC hollow section of size 59x24 mm and wall thickness 2 mm (± 0.2 mm) with inbuilt edging on both sides. The styles and rails mitred and joint at the corners by means of M.S.galvanised/plastic brackets of size 75x220 mm having wall thickness 1.0 mm and stainless steel screws.The styles of the shutter reinforced by inserting galvanised M.S. tube of size 20x20 mm and 1 mm (± 0.1mm) wall thickness. The lock rail made up of 'H' section, a uPVC hollow section of size 100x24 mm and 2mm (± 0.2 mm) wall thickness,fixed to the shutter styles by means of plastic/galvanised M.S. 'U' cleats.The shutter frame filled with a uPVC multi-chambered single panel of size not less than 620 mm, having over all thickness of 20 mm and 1 mm (± 0.1 mm) wall thickness. The panels filled vertically and tie bar at two places by inserting horizontally 6 mm galvanised M.S. rod and fastened with nuts and washers,complete as per manufacturer's specification and direction of Engineer-in-charge( For W.C. and bathroom door shutter).

17.1.1 Providing and fixing water closet squatting pan (Indian type W.C. pan) with 100 mm Sand Cast Iron P or S trap, 10 litter low level white P.V.C.flushing cistern, including flush pipe, manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever require:White Vitreous china Orissa pattern W.C. pan of size 580x440mm with integral type foot rests

17.2.1 Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required:W.C. pan with ISI marked white solid plastic seat and lid

50.17.1.5 Supplying and fixing CP Health Faucet superior quality ( Jagur or equvalent make ) including cost of materials and labour charges etc complete as per the direction of site Engineer-in-charge.

Student Toilet . 17.2.2 Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: W.C. pan with ISI marked black solid plastic seat and lid

50.17.1.4 Supplying and fixing CP Health faucet good quality including cost of materials and labour charges etc. complete as per the direction of site engineer-in-charge.

15.57 Dismantling aluminium / Gypsum partitions, doors, windows, fixed glazing and false ceiling including disposal of unserviceable surplus material and stacking of serviceable material with in 50 metres lead as directed by Engineer - in-Charge

9.121 Providing and fixing Fiber Glass Reinforced plastic (FRP) Door Frames of cross- section 90 mm x 45 mm having single rebate of 32 mm x 15 mm to receive shutter of 30 mm thickness. The laminated shall be moulded with fire resistant grade unsaturated polyester resin and chopped mat. Door frame laminate shall be 2 mm thick and shall be filled with suitable wooden block in all the three legs. The frame shall be covered with fiber glass from all sides. M.S. stay shall be provided at the bottom to steady the frame.

9.122.1 Providing and fixing to existing door frames. 30 mm thick Glas Fibre Reinforced Plastic (FRP) panelled door shutter of required colour and approved brand and manufacture, made with fire - retardant grade unsaturated polyester resin, moulded to 3 mm thick FRP laminate for forming hollow rails and styles, with wooden frame and suitable blocks of seasoned wood inside at required places for fixing of fittings, cast monolithically with 5 mm thick FRP laminate for panels conforming to IS : 14856, including fixing to frames.

17.7.7 Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: White Vitreous China Flat back wash basin size 450x300 mm with single 15 mm C.P. brass pillar tap

Renovation of Zoology (PG) laboratory 11.41.2 Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS : 15622, of approved make, in all colours and shades, laid on 20 mm thick cement mortar 1:4(1 cement : 4 coarse sand), including grouting the joints with white cement and matching pigments etc., complete.Size of Tile 600 x 600 mm.

od50636/2019_2020 Providing and fixing 12 mm thick frameless toughened glass of approved brand and manufacture, including cost of good quality adhesive as per direction of Engineer-in-charge

Renovation of Bio-chemistry laboratory 11.41.2 Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS : 15622, of approved make, in all colours and shades, laid on 20 mm thick cement mortar 1:4(1 cement : 4 coarse sand), including grouting the joints with white cement and matching pigments etc., complete.Size of Tile 600 x 600 mm.

17.11.1 Providing and fixing white vitreous china laboratory sink with C.I brackets, C.P. brass chain with rubber plug 40 mm C.P brass waste and 40 mm C.P. brass trap with necessary C.P. brass unions complete, including painting of fittings and brackets, cutting and making good the wall wherever required:Size 450x300x150 mm

Renovation of Physics Research Laboratory 11.41.2 Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS : 15622, of approved make, in all colours and shades, laid on 20 mm thick cement mortar 1:4(1 cement : 4 coarse sand), including grouting the joints with white cement and matching pigments etc., complete.Size of Tile 600 x 600 mm.

6.40 Providing and laying Gypsum panel partitions 100 mm thick with water proof Gypsum panels of size 666x500x100 mm, made of calcite phosphor Gypsum fixed with tongue and groove, jointed with bonding plaster as per manufacturers specifications in superstructure above plinth level up to floor V level. Gypsum blocks will have a minimum compressive strength of 9.3 kg/cm2

9.121 Providing and fixing Fiber Glass Reinforced plastic (FRP) Door Frames of cross- section 90 mm x 45 mm having single rebate of 32 mm x 15 mm to receive shutter of 30 mm thickness. The laminated shall be moulded with fire resistant grade unsaturated polyester resin and chopped mat. Door frame laminate shall be 2 mm thick and shall be filled with suitable wooden block in all the three legs. The frame shall be covered with fiber glass from all sides. M.S. stay shall be provided at the bottom to steady the frame.

9.122.1 Providing and fixing to existing door frames.30 mm thick Glas Fibre Reinforced Plastic (FRP) panelled door shutter of required colour and approved brand and manufacture, made with fire - retardant grade unsaturated polyester resin, moulded to 3 mm thick FRP laminate for forming hollow rails and styles, with wooden frame and suitable blocks of seasoned wood inside at required places for fixing of fittings, cast monolithically with 5 mm thick FRP laminate for panels conforming to IS : 14856, including fixing to frames.

Supplying and Fixing 1.5 Ton Air Condition

Supplying and Fixing Exhaust Fan

Remodeling and Renovation of Physics Core And Complementary Laboratory . 11.41.2 Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS : 15622, of approved make, in all colours and shades, laid on 20 mm thick cement mortar 1:4(1 cement : 4 coarse sand), including grouting the joints with white cement and matching pigments etc., complete.Size of Tile 600 x 600 mm.

Renovation of Chemistry (Core) Laboratary 11.41.2 Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS : 15622, of approved make, in all colours and shades, laid on 20 mm thick cement mortar 1:4(1 cement : 4 coarse sand), including grouting the joints with white cement and matching pigments etc., complete.Size of Tile 600 x 600 mm.

17.11.1 Providing and fixing white vitreous china laboratory sink with C.I brackets, C.P. brass chain with rubber plug 40 mm C.P brass waste and 40 mm C.P. brass trap with necessary C.P. brass unions complete, including painting of fittings and brackets, cutting and making good the wall wherever required:Size 450x300x150 mm

8.2.1.2 Providing and fixing 18 mm thick gang saw cut, mirror, polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations, of required size,approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 ( 1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels.Area of slab over 0.50 sqm

Renovation of Chemistry complementary Laboratory 11.41.2 Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS : 15622, of approved make, in all colours and shades, laid on 20 mm thick cement mortar 1:4(1 cement : 4 coarse sand), including grouting the joints with white cement and matching pigments etc., complete.Size of Tile 600 x 600 mm.

11.36 Providing and fixing I st quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to bespecified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer -in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.

13.1.1 12 mm cement plaster of mix:1:4 ( 1 cement : 4 fine sand)

13.43.1 Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface:Water thinnable cement primer

Modernization and renovation of canteen 11.37 Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), including pointing the joints with white cement and matching pigment etc., complete.

11.41.2 Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS : 15622, of approved make, in all colours and shades, laid on 20 mm thick cement mortar 1:4(1 cement : 4 coarse sand), including grouting the joints with white cement and matching pigments etc., complete.Size of Tile 600 x 600 mm.

10.16.1 Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete.Hot finished welded type tubes

10.25.2 Item Shifted to head 14 as item 14.74Steel work welded in built up sections/framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works

od50715/2019_2020 Roofing with GI trafford profile sheet 0.35 mm thick powder coated with overlaps of 150 mm at ends and SS screes including plain washers and bitumen washers etc. complete.

16.15.2 Supplying at site:Welded steel wire fabric of required width having rectangular mesh painted with two or more coats of enamel paint of approved shade over a coat of primer (Priming & painting to be paid for separately)

50.6.1.4 Solid block masonry using pre cast solid blocks (Factory made) of size 30x20x20cm or nearest available size confirming to IS 2185 part I of 1979 for foundation and plinth with thickness 20cm and above in: CM 1:6 ( 1 cement : 6 coarse sand ) etc complete

4.1.8 Providing and laying in position cement concrete of specified grade excluding the cost of centering andshuttering - All work up to plinth level:1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 nominal size)

Wet Grinder stainless steel ( Grade 304) Capacity : 5 Litre

Butchery Table(RHS) stainless steel ( Grade 304) 16 SWG Table top, Splash and Legs 20 swg Sink. OAS; 135x60x85+15 cm Sink Size : 45x45x30cm And Bottom Cross bar Inner Supporting Frames with SS Angle 32x32x3mm Thick. Pipe Legs with 38mm Dia, Cross Support up rights 25mm Ø SS Round Pipe. Legs Fitted with Adjustable Nylon Bullet Feet.Finished with Sound Deadening Compound.

Nylon Cutting Board OAS:50cm Diax85cmHt.

Pot Rack OAS;120x60x150 cm Attach; 4 Tier Leg-11 /2" SHS , Frame -1"SHS Center Support-3/4" SHS

Pot Wash Sink OAS;120x75x85+15 cm Sink Size : 105x60x85+15cm Attach : Bottom Cross Bar Support

Rice Cooker Capacity: 20Kg Fittings: T-35 Burner with Valve Fittings and Drainage Valve,Copper Pigtail,etc. Sheeting-Vessel 14 Gauge SWG 304 Outer and Inner 20 SWG 304,

Storage Rack 4 tier stainless steel ( Grade 304) OAS;110x45x150 cm 4 Tier ,Inner Supporting Frames with SS Angle 32x32x3mm Thick. Pipe Legs with 38mm Dia, Cross Support up rights 25mm Ø SS Round Pipe. All Legs Fitted with Adjustable Nylon Bullet Feet. Table and under Shelves Finished with Sound Deadening Compound.

Vegetable Cutting table stainless steel ( Grade 304) OAS;180x60x85+15 cm One undershelf, inner Supporting Frames with SS Angle 32x32x3mm Thick. Pipe Legs with 38mm Dia, Cross Support up rights 25mm Ø SS Round Pipe. All Legs Fitted with Adjustable Nylon Bullet Feet. Table and under Shelves Finished with Sound Deadening Compound.

Single Burner Cooking Range stainless steel ( Grade 304) OAS: 60x60x45cm Attach: One under Shelf, Fittings: One No HP Burner, Needle Control Valve, Copper Pigtails,etc… Inner Supporting Frames with SS Angle 32x32x3mm Thick. Pipe Legs with 38mm Dia, Cross Support up rights 25mm Ø SS Round Pipe. All Legs Fitted with Adjustable Nylon Bullet Feet. Table and under Shelves Finished with Sound Deadening Compound.

3 Burner Cooking Range stainless steel ( Grade 304) OAS: 165x60x85 cm Attach: One under Shelf Fittings: 3No HP Burner, Needle Control Valve, Copper Pigtail, etc. Inner Supporting Frames with SS Angle 32x32x3mm Thick. Pipe Legs with 38mm Dia, Cross Support up rights 25mm Ø SS Round Pipe. All Legs Fitted with Adjustable Nylon Bullet Feet. Table and under Shelves Finished with Sound Deadening Compound.

Work Table OAS;135x60x85 cm One undershelf, Inner Supporting Frames with SS Angle 32x32x3mm Thick. Pipe Legs with 38mm Dia, Cross Support up rights 25mm Ø SS Round Pipe. All Legs Fitted with Adjustable Nylon Bullet Feet. Table and under Shelves Finished with Sound Deadening Compound.

Dosabathi stainless steel ( Grade 304) OAS: 100x75x85+15cm Plate Size; 85x60x16mm thick Attach; One under Shelf Fittings: Two No V’900 Burners ,Needle Control Valve Copper,Pigtail etc… Inner Supporting Frames with SS Angle 32x32x3mm Thick. Pipe Legs with 38mm Dia, Cross Support up rights 25mm Ø SS Round Pipe. All Legs Fitted with Adjustable Nylon Bullet Feet. Table and under Shelves Finished with Sound Deadening Compound.

Table stainless steel ( Grade 304) OAS;70x75x85+15 cm Attach: One undershelf , One undershelf, Inner Supporting Frames with SS Angle 32x32x3mm Thick. Pipe Legs with 38mm Dia, Cross Support up rights 25mm Ø SS Round Pipe. All Legs Fitted with Adjustable Nylon Bullet Feet. Table and under Shelves Finished with Sound Deadening Compound.

od131736/2020_2021 Providing and fixing 18 mm thick gang saw cut, mirror, polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations, of required size, approved shade, colour and texture epoxy touch ups, including rubbing, moulding and polishing to edges to give high gloss finish etc. complete at all levels. Area of slab over 0.50 sqm

Sink Table(LHS) stainless steel ( Grade 304) OAS;135x60x85+15 cm Sink Size;45x45x30cm, One undershelf, Inner Supporting Frames with SS Angle 32x32x3mm Thick. Pipe Legs with 38mm Dia, Cross Support up rights 25mm Ø SS Round Pipe. All Legs Fitted with Adjustable Nylon Bullet Feet. Table and under Shelves Finished with Sound Deadening Compound.

Deep Freezer 320 Litre

Work Table stainless steel ( Grade 304) OAS;110x60x85+15 cm ,One undershelf, Inner Supporting Frames with SS Angle 32x32x3mm Thick. Pipe Legs with 38mm Dia, Cross Support up rights 25mm Ø SS Round Pipe. All Legs Fitted with Adjustable Nylon Bullet Feet. Table and under Shelves Finished with Sound Deadening Compound.

Storage Rack stainless steel ( Grade 304) OAS;135x45x150 cm Attach;4 Tier, Inner Supporting Frames with SS Angle 32x32x3mm Thick. Pipe Legs with 38mm Dia, Cross Support up rights 25mm Ø SS Round Pipe. All Legs Fitted with Adjustable Nylon Bullet Feet. Table and under Shelves Finished with Sound Deadening Compound.

Cash Counter stainless steel ( Grade 304) OAS;100x60x100cm Attach;2 Cash Draw, One Under Shelf, Three Side Covering, Inner Supporting Frames with SS Angle 32x32x3mm Thick. Pipe Legs with 38mm Dia, Cross Support up rights 25mm Ø SS Round Pipe. All Legs Fitted with Adjustable Nylon Bullet Feet. Table and under Shelves Finished with Sound Deadening Compound.

Food Pick Up Table stainless steel ( Grade 304) OAS;210x60x85+15cm One undershelf,, Inner Supporting Frames with SS Angle 32x32x3mm Thick. Pipe Legs with 38mm Dia, Cross Support up rights 25mm Ø SS Round Pipe. All Legs Fitted with Adjustable Nylon Bullet Feet. Table and under Shelves Finished with Sound Deadening Compound.

Bainmarie Counter stainless steel ( Grade 304) OAS;180x60x85cm Vessel:1/1 -2 nos,1/2 - 6nos. One undershelf, Inner Supporting Frames with SS Angle 32x32x3mm Thick. Pipe Legs with 38mm Dia, Cross Support up rights 25mm Ø SS Round Pipe. All Legs Fitted with Adjustable Nylon Bullet Feet. Table and under Shelves Finished with Sound Deadening Compound.

Snacks Display Counter stainless steel ( Grade 304) OAS;120x60x120cm Attach : 3 Nos Shelves,Back Glass Sliding Door,Top & 3 side Straight Glass Covering, Bottom S.S.@45cm Ht.at Bottom,etc.. Inner Supporting Frames with SS Angle 32x32x3mm Thick. Pipe Legs with 38mm Dia, Cross Support up rights 25mm Ø SS Round Pipe. All Legs Fitted with Adjustable Nylon Bullet Feet. Table and under Shelves Finished with Sound Deadening Compound.

Hand Wash Sink stainless steel ( Grade 304) 16 SWG OAS;240x45x85+15cm. Inner Supporting Frames with SS Angle 32x32x3mm Thick. Pipe Legs with 38mm Dia, Cross Support up rights 25mm Ø SS Round Pipe. All Legs Fitted with Adjustable Nylon Bullet Feet. Table and under Shelves Finished with Sound Deadening Compound.

LPG Installation As per the specification BIS 6044 1972 Having 8cylinder (4+4) with all fittings including the labour charge for Pipe Bending, Welding, Painting, Pressure Testing,etc.

VARGHESE ANTONY

BABU JOY