GENERAL RM RC1 KARUKACHAL ZONE III 2025- 26 One Year Running Contract for various roads under PWD Road Section Karukachal in Kottayam District 6Road Stretches For a total length of 15.980 Km Zone III General Civil Work

Amount

Appendix A Reactive Maintenance

55.2:Supplying and stacking 12mm hard blue granite broken stone in standard heaps for measurement(IRC 3.2.1.a)

55.9.a:Filling up pot holes (cut and formed to regular shapes and all loose and defective materials removed) after supplying a prime coat of hot bitumen using 12mm departmental broken stone and compacting with power roller to get a compact surface.

55.4:Supplying and stacking 36mm size hard broken stone in standard heaps for measurement.

55.8.a:Filling up pot holes (cut and formed to regular shapes and all loose and defective materials removed) after supplying a prime coat of hot bitumen using 36mm departmental broken stone and compacting with power roller to get a compact surface.

5.2.a:Providing and applying tack coat with bitumen emulsion( RS) using emulsion pressure distributor at the rate of 0.20 - 0.30 kg per sqm on the prepared bituminous surface cleaned with mechanical broom.

OD241516/2024-2025:Mix Seal Surfacing providing ,laying and rolling of close graded premix surface material of 20mm thickness composed of 11.2mm to .09mm (Type A) or 13.2mm to 0.9mm (TypeB)aggregates using penetration grade bitumen using VG 30 to the required line ,grade and level to serve as wearing course on a previously prepared base ,including mixing in a suitable plant ,laying and rolling with a three wheel 8-10KN static roller and finishing to required level and grades as per Technical specification Clause 509 of MORD - Bitumen @ 22.00kg/10m2By Manual Means

3.6:Excavation for roadwork in soil with hydraulic excavator of 0.9 cum bucket capacity including cutting and loading in tippers, trimming bottom and side slopes, in accordance with requirements of lines, grades and cross sections, and transporting to the embankment location within all lifts and lead upto 1000m

12.4:Plain cement concrete 1:3:6 nominal mix in foundation with crushed stone aggregate 40 mm nominal size mechanically mixed, placed in foundation and compacted by vibration including curing for 14 days.

12.8.1.C:Plain/Reinforced Cement Concrete in Open Foundation complete as per Drawing and Technical Specifications RCC Grade M20 - Using Concrete Mixer - (Without formwork)

OD241512/2024-2025:Providing and fixing Vinyl sticker including lettering and symbols for existing DLP Board 1.22m x 0.61m size including Painting all exposed surface with 2 coat of epoxy painting etc.

8.4.12:Providing and fixing of retro- reflectorised cautionary, mandatory and informatory sign with 7years warranty manufactured as per IRC :67 made of Type IV micro prismatic grade sheeting fixed over aluminum sheeting, 2 mm thick/aluminum composite material sheeting 4 mm thick with suitable back supporting frame of MS angle 25x25x3 and supported on GI pipe pole 50mm NB confirming to IS 1239 firmly fixed to the ground by means of properly designed foundation with M 15 grade cement concrete min size 45 cm x 45 cm x 60 cm, 60 cm below ground level including painting all exposed surface with 2 coats of epoxy painting over epoxy primer and as per approved drawing and clause 801 including lettering symbols etc. 50cmx 60 cm rectangular (Single chevron etc.)

8.5:Providing and fixing of direction and place identification retro-reflectorised sign with 7 years warranty manufactured as per IRC :67 made of Type IV micro prismatic grade sheeting fixed over aluminium sheeting, 2 mm thick/ aluminium composit material sheeting 4 mm thick with area not exceeding 0.9 sqm, with suitable back supporting frame of MS angle 40x40x6 and supported on GI pipe pole 50mm NB confirming to IS 1239 firmly fixed to the ground by means of properly designed foundation with M 15 grade cement concrete min size 45 cm x 45 cm x 60 cm, 60 cm below ground level including painting all exposed surface with 2 coats of epoxy painting over epoxy primer and as per approved drawing and clause 801 including lettering symbols etc.

55.15:Refurbishment of existing signboardsRefurbishment of existing signboards of all size except gantry mounted ones to their original reflectivity & position by removing obstructions like overgrowth vegitation etc ,if any,washing the signboards with water & soap solution to remove all dirt, oil etc. , correcting any dislocations including minor repairs, replacement of lost nut and bolts etc complete.

8.15:Supplying and installation of delineator (Roadway indicators) posts 80- 100cm high above ground level, pained black, and white in 15 cm wide strips, fitted with min. 80 x 100 mm rectangular or 75 mm dia circular retro reflectorized panels at the top with minimum visibility of 300m with provisions to prevent edge lifting and vandalisam, and conforming to clause 806 , IRC-79 and the drawings including fixing to ground (The deleniator shall be of approved type as per specification)

OD241513/2024-2025:Providing and fixing 1.22m*0.61m size DLP board of with suitable supporting back supporting frame of MS ANGLE 25*25*5 and supported on GI Pipe pole 50mm NB CONFIRMING TO is 1239 firmly fixed to the ground by means of properly designed foundation with M15 grade cement concrete minimum size45cm*45cm*45cm, 45cm below ground level including painting all exposed surface with two coat of epoxy painting over epoxy primer including lettering symbols by using vinyl sticker etc . complete

3.24.A:Construction of unlined surface drains of average cross sectional area 0.40 sqm in soil by mechanical Means to specified lines, grades, levels and dimensions to the requirement of clause 301 and 309. Excavated material to be used in embankment within a lead of 50 metres (average lead 25 metres)

Appendix B - Proactive Maintenance

55.4:Supplying and stacking 36mm size hard broken stone in standard heaps for measurement.

55.8.a:Filling up pot holes (cut and formed to regular shapes and all loose and defective materials removed) after supplying a prime coat of hot bitumen using 36mm departmental broken stone and compacting with power roller to get a compact surface.

5.2.a:Providing and applying tack coat with bitumen emulsion( RS) using emulsion pressure distributor at the rate of 0.20 - 0.30 kg per sqm on the prepared bituminous surface cleaned with mechanical broom.

OD241518/2024-2025:Mix Seal Surfacing providing ,laying and rolling of close graded premix surface material of 20mm thickness composed of 11.2mm to .09mm (Type A) or 13.2mm to 0.9mm (TypeB)aggregates using penetration grade bitumen using VG 30 to the required line ,grade and level to serve as wearing course on a previously prepared base ,including mixing in a suitable plant ,laying and rolling with a three wheel 8-10KN static roller and finishing to required level and grades as per Technical specification Clause 509 of MORD - Bitumen @ 22.00kg/10m2By Manual Means

Appendix C -Premonsoon Work

2.2:Clearing grass and removal of rubbish up to a distance of 50 metres outside the periphery of the area

OD241521/2024-2025:Filling up of potholes with bituminous ready mix compound (25kg bag) and compacting by ramming to get a compact surface including of cost of materials, laying charges transportation to site etc complete rate is arrived for a bag of 25kg.

OD241519/2024-2025:Hire and running charges of Tipper

OD241523/2024-2025:Engaging wood cutter with machine for Cutting of trees, including cutting of trunks, branches and removal of stumps, roots, etc

OD241520/2024-2025:Arranging man mazdoor for cutting earthen drain,diverting blocken water, and other various works

OD241522/2024-2025: Hydraulic Excavator of 1 cum bucker

2.3.2.A:Clearing and grubbing road land including uprooting rank vegetation, grass, bushes, shrubs, saplings and trees girth up to 300 mm, removal of stumps of trees cut earlier and disposal of unserviceable materials and stacking of serviceable material to be used or auctioned, up to a lead of 1000 metres including removal and disposal of top organic soil not exceeding 150 mm in thickness In area of light jungle - By Mechanical Means

APPENDIX D Routine Inspection

OD241511/2024-2025:Conducting and Reporting Routine Inspections for the entire length of the Project Road frequency of 7 days throughout the agreement period of the Running contract as directed by the departmental officer at site. Additional RI may be required in response to reports or complaints from the police ,other authotities and public as a result of major accidents, typhoon or flooding damages etc and are not measurable /payable.A proportion of the RI should be carried out either during or immediately following a period of wet weather.

JINU MATHEW KURIAN (BID ID -2235057)

Antony Jim (BID ID -2234845)

NIKHIL T REJI (BID ID -2234954)

Bidder Name

P.M KABEER

JINU MATHEW KURIAN

NIKHIL T REJI

Antony Jim