Sipu Regional Water Supply Scheme

Name of Work:- Providing, Supplying, Installing Polder Pump with Lowering,

Laying, Jointing 711 mm dia MS Pipe & Constructing 3 x 3 mt. Size Pumproom @

Bhapi NMC 443.50 Km. Under Sipu RWSS M & R. TA.DHANERA &

DIST.BANASKANTHA. (2nd Attempt)

Schedule showing the approximatelely quantity of materials to be supplied to the controctor and at

the government store for the wor to be executed by controctor and rate which way are to be

Sr. material to be Departmental

Particular Quantity Place of Delivery

No. charge to the Issue Rate

273 mm dia MS Departmental

100.00 Rmt. Free of Cost

406.4 mm dia MS

1) Material not included in schedule - A & required for the work shall be provided by the contractor

at the own cost.

2) Any materials required for the items other than labour charged items mentioned in shedule-B

but available whom deptt. Will be issued in request of the controctor at transporting department

issue rate of market whichever is more.

3) The contractor shall provided his own arrangement for loading , unloading and the materials

issued by the department from the store to him at his own cost of the controctor will be

responsible for damage which is during transist.

4) The materials issued by the department and not used in the work shall be returne by the

contractor in good and acceptable to department will be received at double the issu rate fixed by

Signture of Deputy Executive Engineer

contractor P. H. San Subdivision

Name of Work:- Providing, Supplying, Installing Polder Pump with Lowering, Laying, Jointing 711 mm dia MS Pipe &

Constructing 3 x 3 mt. Size Pumproom @ Bhapi NMC 443.50 Km. Under Sipu RWSS M & R. TA.DHANERA &

DIST.BANASKANTHA. (2nd Attempt)

Sr. No. DESCRIPTION OF ITEM Qty. Unit Rate Amount

1 Providing, installation, testing and commissioning of submersible, Non clog type with required 3.00 Set 412136.00

capapcity & head as per IS 8034 suitable for water having upto 10000 PPM turbidity with suitable

submersible wet type, water cooled, squirrel cage motor to IS 9283, working on three phase, 50 Hz

+/-3%, 415V +/- 10%, AC supply, 2900 RPM synchronize speed with 10 mtr copper conductor flat

cable from pump to starter panel with cable end terminations (4) all supports, clamps, pipe fittings

alongwith mechanical seal, bearing bush, strainer etc. complete set & following M.O.C: Casing CI,

SS CF8M impeller, Bronze: wearing ring & Bearing bush, TC mechanical seal, CS/S.S.bearing, S.S

shaft with sleeve, SS strainer & MS motor body.-60 HP

(700 m3/Hr x 15m head x 60 HP :- 2 working + 1 stand by)

2 Providing & Supplying ISI mark CI D/F Butterfly valves as per IS:13095 (Latest Edition) of following 4.00 No. 8563.00

class and diameter incl. all taxes, insurance, transportation, freight charge, octroi, inspection

charges, loading, unloading, convey. to dept. stores, stacking etc. completed. PN-1.0.-250 mm Dia

3 Providing & Supplying ISI mark CI D/F Reflux valves as per IS:5312 (Latest Edition) of following class 4.00 No. 26759.00

and diameter incl. all taxes, insurance, transportation, freight charge, octroi, inspection charges,

loading, unloading, convey. to dept. stores, stacking etc. completed. PN-1.0- 250 mm dia PN:

4 Reflux Valves

Lowering, Laying & Jointing ISI mark CI D/F Sluice Valves , Butterfly Valves & Reflux Valves of 8.00 No. 946.00

following class and diameter including all taxes, insurance, transportation, freight charges, octroi,

inspection charges, loading, unloading, conveyance to departmental stores, stacking, All Labour,

Jointing Material including Nut Bolts and Giving Satisfactory Hydraulic Testing etc. complete. A1)

Sluice Valve eith ISI mark PN-1 with hand Wheel/Cap Operated (PD Type Short Body)- 250 mm Dia

5 Design, Supply, Installation, Testing, Commissioning of Diaphragm sealed Pressure Gauge, ±1% 1.00 No. 3012.00

accuracy, Direct bottom 1/2" NPT (M) process connection, IP 67, Glycerine filled, SS304 Case with

Bayonet Type Bezel, SS316 L Diaphragm, SS316 Bottom Housing Material, SS 316 Movement

material, Aluminium dial with black graduation on white background, Micro Zero adjustable

pointer, neoprene gasket, Blow out disc, shatter proof glass, SS tag plate etc as per IS 3624.

mm Dial Size - 0 to 21 Kg/cm2

6 Providing and erecting approved make four pole moulded case circuit breaker having breaking 1.00 No. 20739.00

capacity ICU of 35 KA. And above at 415V. Having normal current rating 250 A. with variable

thermal and magnetic release suitable to work on A.C. supply 50 C/S. with all internal connections,

spreader tinned copper and complete erected in existing 16 G.M.S. housing. ICS = 100% of ICU only

7 Supplying and erecting triple pole & neutral 440V/ 500V panel mounting Aluminium Busbars with 0.70 Rn. mtr 1455.00

four equal Nos. of bus having current density not more than 0.8 Amp. / sq.mm (Rated current /

cross section area) duly wrapped with colour insulating tape for phase sequence of following

current carrying capacity, erected with necessary bus bar supports /insulators, main cable socket

to each busbar,erected in existing cubical panel with necessary connections. Suitable for 300 Amp.

8 Supply, laying, testing & commissioning 1.1 kV grade, XLPE insulated, stranded Aluminium

conductor, galvanised steel flat strip / round wire armoured, extruded PVC type ST2 sheathed,

heavy duty cable (to be laid on wall surface with necessary clamps / in existing cable trench /

cable trays / conduit / pipe sleeves at road crossing or floor as per site requirement)conforming to

IS:7098 (Part-1) & IEC:60502 (Part-1) of following sizes:

A 3.5 Core x 95 Sqmm 30.00 Meter 343.00

B 3 Core x 95 Sqmm 240.00 Meter 299.00

9 Auto transformer starter suitable for local & remote pump control application consisting of Auto 3.00 No. 46238.00

Transformer (vacuum impregnated, air cooled having three (3) tappings at 50%, 65% and 80%),

incomer MCCB / MPCB, overload relay and contactors as per Type II coordination including digital

MFM with RS 485 communication port, analogue type ammeter with selector switch, run hour

meter, required protective relays & control accessories. A. T. S. from 51 to 60 HP

10 Auto transformer starter suitable for local & remote pump control application consisting of Auto 1.00 No. 129448.00

Transformer (vacuum impregnated, air cooled having three (3) tappings at 50%, 65% and 80%),

incomer MCCB / MPCB, overload relay and contactors as per Type II coordination including digital

MFM with RS 485 communication port, analogue type ammeter with selector switch, run hour

meter, required protective relays & control accessories. A. T. S. from 151 to 160 HP

11 Supplying rubber matting of following thickness as per IS:15652/ IEC 61111. 4 mm 6.00 Sq.mt 1017.00

12 Steel work, riveted in built up sections framed work including cutting, hoisting, fixing in position 1000.00 Kg. 58.89

and applying a priming coat of read lead paint. (A) In beams and joists, channels angles Tees, flats,

with connecting plates or angle cleats as in main and cross beams. Hip and jack rafters, purlins

conneted to common rafters and the like.

13 Supplying & Fixing SS 304 Screen for Pump 20.00 Sqmt. 4000.00

14 Excavation for pipe line trenches incl. all safety provisions using site rails and stacking excavated

stuff up to a lead of 90 mts. cleaning the site etc. complete for lifts and strata as specified.

A In all sorts of soil and soft murrum - Upto 1.50 mt depth 1500.00 Cmt. 89.00

B 1.50 mt to 3.00 mt. depth 150.00 Cmt. 98.00

15 Lowering, laying and jointing & welding in position to correct line & level M.S. Pipe with outer

gunniting & inside linig/Epoxypainting on pedestal or chairs upon prepared formation or prepared

bedding in trenches the rates include conveyance from store to site of work loading, unloading,

joint plastering, hydrotesting etc. complete.

A 273 mm dia 5 mm thick 100.00 Rmt. 251.00

B 711 mm dia 7.1 mm thick 450.00 Rmt. 640.00

C 406.4 mm dia 6.3 mm thick 48.00 Rmt. 354.00

16 MS Specials. M.S. Specials flanged ends Upto/Above 300 mm. Dia. 2000.00 Kg 98.00

17 Refilling the pipeline trenches incl. ramming, watering, consolidating desposal of surplus stuff as 1468.97 Cmt. 22.00

directed within a radius of 3 km.

18 Demolition including stacking of serviceable materials and disposal of unserviceable materialswith 8.45 Cmt. 1082.35

all lead and lift.(i) RCC Work

19 Providing & Casting in situ C.C. in Grade M-20 using granite, quartzite trap metal of size 6 mm to 32.85 Cmt. 5292.00

20 mm for RCC work, including scaffolding centering, formwork, needle vibrated consolidation,

curing complete up to 6 meter depth or height (excluding cost of reinforcement) with centering

and shuttering/ deshuttering etc. complete for structure other than water retaining structure.

20 Transportation of 711 mm dia MS Pipe From Dantiwada to Bhapi HR with Crane. 15.00 Trip 18629.00

21 Construction of Pumproom Size having 3 x 3 mt. as per attach drawing & Detail Rate Analysis. 1.00 No. 119598.24

22 Labour charges for repairing of leakage in PVC pipeline of following dia meter at different places 25.00 No. 1629.00

including necessary excavation manually or by mechanise excavation, dewatering removing of mud,

cleaning of pipe and leakage portion, cutting the pipeline & removing piece of pipe from trench

with inclussive of mechanical devices JCB, Hydra/Crain if necessary & labours required with

providing material such piece of PVC pipe with couplers, solution etc. comp.-160mm Dia

I/We am/are willing to carry out the work at ____________________ % (Shoud be written in figures and words) Above/Below the estimated rate

Estimated Cost Put to Tender Estimate Cost Put to Tender

Above:- Below:-

Add Rs.:- Deduct Rs.:-

Net Rs.:- Net Rs.:-

In Word Rs.:- In Word Rs.:-

Sign of Deputy Executive Engineer

Contractor P. H. San Subdivision