Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | 1₹10.1 LAccepted-AOC | ₹10.1 L | 1 | Accepted-AOC AOC has been issued to Anita Singha as 1st lowest bidder. |
| 2 | 2₹12.6 LRejected-AOC TILAGAON TRIPURA U | UNAKOTI | TRIPURA | ₹12.6 L | 2 | Rejected-AOC AOC has been issued to Anita Singha as 1st lowest bidder. |
| 3 | 3₹13.0 LRejected-AOC KAILASHAHAR UNAKOTI TRIPURA PIN 799281 | KAILASHAHAR | UNAKOTI | TRIPURA | 799281 | ₹13.0 L | 3 | Rejected-AOC AOC has been issued to Anita Singha as 1st lowest bidder. |
Tender Value
₹12.1 L
EMD Value
₹24,234
Closing Date
10 Feb 2026, 3:00 pmClosed
Executive Engineer PWD R and B Kailashahar
O/O the Executive Engineer PWD R and B Kailashahar
Construction of 1 one Nos of Box Culvert Size 3.00 3.00 M at the road Bangalibasti to Deoacherra at CH 0.730 Km during the year 2025 26
2026_CEPWD_69773_1
64/EE/KLSD/ 2025-26
Open Tender
Civil Works
90 days
Kailashahar
Please refer Tender documents.
5 documents required · 5 mandatory
₹1,000
₹24,234
19 Mar 2026
30 Jan 2026
10 Feb 2026
30 Jan 2026
10 Feb 2026
30 Jan 2026
Excavation for Structures Without dewatering. Earthwork in excavation for structures as per drawing and MoRD technical specifications Clause 305.1 including setting out, construction of shoring & bracing, removal of stumps & other deleterious material and disposal upto a lead of 50 m, dressing of sides & bottom and backfilling in trenches with excavated suitable material. Ordinary Soil Upto 3 m depth
Backfilling behind abutment, wing wall & return wall complete as per drawings & MoRD technical specification Clause 1204.3.8. Sandy material
Filling in foundation trenches as per drawing & MoRD technical specification Clause 305.3.9, 1200. Sand filling
Providing concrete for plain/reinforced concrete in open foundations complete including formwork as per drawings & MoRD technical specifications Clauses 802, 803, 900, 1202 and 1203. (including centering, shuttering, staging etc. but excluding reinforcement). P.C.C grade M 10 (i) Nominal mix 1:3:6
Providing concrete for plain/reinforced concrete in open foundations complete including formwork as per drawings & MoRD technical specifications Clauses 802, 803, 900, 1202 and 1203. (including centering, shuttering, staging etc. but excluding reinforcement). P.C.C grade M 15 Nominal mix 1 : 2.5 : 5
Plain/reinforced cement concrete in substructure complete including formwork as per drawings & MoRD technical specification Clauses 802, 804, 805, 806, 807, 900, 1202 & 1204. (including centering, shuttering, staging etc. but excluding reinforcement) RCC grade M25 Upto 5m height
Supplying, fitting & placing Thermo-Mechanically treated bar/ Cold twisted deformed steel bar in substructure complete as per drawings & MoRD technical specification Clauses 1002, 1005, 1010 and 1202.
Providing & laying reinforced cement concrete in superstructure as per drawings & MoRD technical specifications Clauses 800, 900, 1205.4 & 1205.5 (including centering, shuttering, staging etc. but excluding reinforcement). RCC grade M 25 For height upto 5 m
Supplying, fitting & placing Thermo-Mechanically treated bar/ Cold twisted deformed steel bar in superstructure complete as per drawings & MoRD technical specification Clauses 1002, 1005, 1010 and 1202.
Providing weepholes in brick masonry/ stone masonry, plain/ reinforced concrete abutment, wing wall, return wall with 100 mm dia AC pipe or uPVC pipe (110 mm OD of 6.0 Kg/cm2 pressure) extending through the full width of the structures with slope of 1(V):20(H) towards drawing face complete as per drawing and MoRD technical specification clauses 614, 709, 1204.3.7.
Brick soling ii) Flat Brick soling Providing and laying flat brick soling layer on prepared subgrade according to lines, grades and cross-section shown on the drawing, filling joints with Earth, free from clay with a Plasticity Index not exceeding 6, watering and rolling the same with three wheeled road roller 80-100 kN as per MoRD Technical Specification Clause 412.
Brick edging laid length wise Providing and laying brick edging laid lengthwise on prepared subgrade according to lines, grades and cross-section shown on the drawing, filling joints with Earth, free from clay with a Plasticity Index not exceeding 6, watering and rolling the same with three wheeled road roller 80-100 KN as per MoRD Technical Specification Clause 412.
Brick on edge soling Providing and laying brick on edge soling layer on prepared subgrade according to lines, grades and cross-section shown on the drawing, filling joints with sand, watering and rolling the same with three wheeled road roller 80-100 kN as per MoRD Technical Specification Clause 412.
Please Enable Macros to View BoQ information
stage.html
html • 0.04 MB
tech_eval.pdf
fin_eval.pdf
aoc.pdf
finance_70996.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 1.58 MB
BOQ_70996.xls
BOQ • 0.25 MB
DNIT64.pdf
Tender Documents • 3.82 MB
Download all tender documents and submit your bid