REPAIR TO INTERNAL ELECTRIFICATION, MCBs AND DBs AND OTHER FITTINGS AND OTHER FIXTURE AT SECTOR 47 UNDER GE (AF) CHANDIGARH

Amount

Taking down carefully with battens PVC conduit unserviceable copper/aluminum point wiring for light/fan socket outlet, complete in all respect including fittings such as pendants holders, batten holders, switches, sockets, ceiling roses, wooden battens junction boxes sketch fittings, round blocks bakelite sheets, regulators fixed in the terminal boxes and making good disturbed surface of wall ceiling and floor etc to match with the existing specifications all as specified.

M&L for point wiring as per colour coding with 1.5sqmm FRLSH cable PVC insulated unsheathed with stranded copper conductor cable drawn in and including 19mm thick rigid non metallic PVC concealed conduit medium grade including cutting chases for conduit and new sunken terminal boxes duly epoxy painted including 3mm thick plastic laminated sheet top cover and 1.5 sqmm PVC insulated stranded copper conductor FRLSH cable as continuous earth wire connected to common earth dolly complete all as specified and directed.

All as per srl item No. 2.00 above but for 2/ 3 pin socket outlet 6 Amps multipurpose on independent board.

All as per srl item No. 2.00 above but for 2/3 pin socket outlet 6 Amps multipurpose on the same board.

All as per srl item No. 2.00 above but for one light point controlled by 2 No. 2-way switches.

All as per srl item No. 2.00 above but for one bell point controlled by bell push.

All per srl item No. 2.00 above but with 2.5 Sqmm FRLSH cable PVC insulated unsheathed with stranded copper conductor cable for one 2/ 3 pin socket outlet 16 Amp on independent board with 2.5 sqmm PVC insulated stranded copper conductor FRLSH cable as earth continuity conductor.

S&F submain wiring with two runs of single core PVC insulated unsheathed stranded copper conductor FRLSH cable of size 6 sqmm drawn in existing surface/ concealed PVC/ rigid steel conduit including 06 Sqmm PVC insulated stranded copper conductor FRLSH cable as continuous earth wire connected to common earth dolly and all metal parts/ main switch including taking down existing submain wiring complete all as specified and directed. Note: 2 runs of 6 Sqmm main wire and 1 run of 6 Sqmm earth cable shall be measured and paid as one unit.

Supply and fixing switch piano type, flush type, single pole, one way, 6 Amps all as specified and directed.

Supply and fixing socket outlet 2-in-1, flush type 3 pins 6 Amps multipurpose all as specified and directed.

Supply and fixing switch piano flush type, single pole, one way, 16 Amps all as specified and directed.

Supply and fixing socket outlet 2-in-1, flush type, multipurpose, 3 pin, 6 & 16 Amps, 230 volts all as specified and directed.

Supply and fixing switch piano flush type single pole, two way 6 Amp complete all as specified & directed.

Supply and fixing bell push flush type 05 Amps, 230 volts all as specified and directed.

Supply and fixing bell, single phase 230 volts, AC, 50 Hz (domestic pattern) all as specified and directed.

Supply and fixing ceiling rose surface bakelite 65mm x 50mm, two to three terminals all as specified and directed.

Supply and fixing ceiling fan regulators step type electronic for 1200/ 1400mm sweep ceiling fan all as specified and directed.

Supply and fixing in replacement DB sheet metal enclosure double door for MCBs, SPN 240 volts 8 ways with IP 42 protection complete all as specified and directed.

Supply and fixing in replacement MCB single pole and neutral 240 volt, 40 Amp to 63 Amp including connection complete all as specified & directed.

Supply and fixing in replacement MCB SP 240 volt 6 to 32 Amp including connection complete all as specified & directed.

Supply and fixing in replacement 04 feet 20 watt LED batten with extruded aluminium housing with high quality PC diffuser, colour temp 6500K, PF >0.9 complete all as specified and directed.

Supply and fixing in replacement 02 feet 10 watt LED batten with extruded aluminium housing with high quality PC diffuser, colour temp 6500K, PF >0.9 complete all as specified and directed

Supply and fixing in replacement sleek LED mirror light fitting 1 x 10 watt provided with high diffuser including high efficiency electronic driver complete with LED lamp, prewired upto connection block and connecting with three core PVC copper flexible cable of size 1.5 sqmm from ceiling rose to connection block complete all as specified and directed

Supply and fixing in replacement new generation eco friendly energy saving bulk head fittings with high luminous efficacy with and including 09 watts LED bulb and provision of 0.5 sqmm 3 core flexible copper conductor cable from connector/ ceiling rose to fitting complete all as specified and directed.

Supply and fixing in replacement City-1/ City-2 wall mounted fittings with ABS housing and clear polycarbonate cover including retrofit LED bulb 9 watt and provision of 0.5 sqmm 3 core flexible copper conductor cable from connector/ ceiling rose to fitting complete all as specified and directed.

M&L in replacement of earthing complete with galvanized steel earth plate electrode 60cms x 60cms x 6mm thick buried directly in ground vertically to a depth not less than 2.25 meter below ground level with top edge of the plate not less than 1.5 metre below normal ground level earth plate surrounded by 15 cm thick and packed with alternate layers of charcoal dust and common salt, earth lead wire 4.0mm connected by means of bolts ,nuts ,check nuts and washers of galvanized iron or steel and thimbles and other end of the earth wire connected to main switch board and protected by galvanized iron or steel pipe medium grade 15mm bore and water pipe 20mm bore GI medium grade with funnel and wire mesh ,including all necessary excavation and earth work PCC chamber in cement concrete (1:3:6) type C-2 and RCC cover 50mm thick in RCC (1:2:4) type B-1 using 20mm graded crushed stone aggregate reinforced with 8mm dia MS deformed bars @ 75 mm c/c both ways and all as shown in electrical plate No 3 of MES Sch Part-1 (2009), complete all as specified & directed.

Attending the complaints of non functional geysers of capacity 25/ 50 ltrs and repairing it without taking down by checking/ replacing heating elements, thermostats, PVC connections, indicating lamps, safety valves, MCBs and connection of wires etc. and making geyser serviceable in all respects complete all as specified and directed. Notes: (i) Items such as heating elements, thermostats, PVC connections, indicating lamps, safety valves, MCBs, top and bottom plates and copper cable 2.5 Sqmm 3 core shall be measured and paid separately as 'Supply Only' )

Supply only PVC helical (Hot/ Cold) water connection pipe of size 450mm x 15mm dia with two No. brass nuts suitable for geyser all as specified and directed.

Supply only heating element of capacity 1.5KW/ 2.00 KW any type suitable for geyser of capacity 25/ 50 Ltr all as specified and directed.

Supply only thermostat suitable for geyser of capacity 25/ 50Ltr of any type/ pattern as per existing all as specified and directed.

Supply only plug top 3 pin 15 Amp, 240 Volts all as specified and directed.

Supply only top cover suitable for 25 Ltrs/ 50 Ltrs capacity including screws, washers etc. complete all as specified and directed.

Supply only bottom cover suitable for 25 Ltrs/ 50 Ltrs capacity including screws, washers etc. complete all as specified and directed.

Supply only indicating lamp of different colours viz. red/ yellow/ green suitable for geyser of capacity 25/ 50 Ltr of any type/ make all as specified and directed.

Supply only stainless steel inner shell of water heater of capacity 25 litre as per existing model all as specified and directed.

Supply only stainless steel inner shell of water heater of capacity 50 litre as per existing model all as specified and directed.

Supply only copper chromium plated base assembly/ siphon assembly suitable for geyser of 25 Ltr capacity of any make and type complete with jointing materials like rubber sheet, nuts & bolts complete all as specified and directed.

Supply only copper chromium plated base assembly/ siphon assembly suitable for geyser of 50 Ltr capacity of any make and type complete with jointing materials like rubber sheet, nuts & bolts complete all as specified and directed.

Supply only chromium plated gun metal NRV of size 15mm bore all as specified and directed.

Supply only 10mm dia, 100mm long MS wall fastener with nuts, bolts, washers and locking pipe complete all as specified and directed.

Attending the complaints of non functional ceiling fan/ exhaust fan of any sweep and testing and repairing the ceiling/ exhaust fan without taking down by checking/ replacing of fan condenser, fan regulators hanging accessories and connection of wires etc. and making fan serviceable complete all as directed. Notes:-(a) Replacement of items such as fan condenser, fan regulator, flexible cable multi stranded 3 core shall be measured and paid separately. (b) Repairing up to two fans at a time in one quarter will be CONSIDERED AS ONE COMPLAINT and more than two fans at a time, two complaints/ visit shall be considered for same quarter.

Supply only capacitor 3.15 mfd for ceiling fans of any make/ model/ sweep complete all as specified and directed.

M&L for disconnecting and taking down ceiling fan 1200/ 1400mm sweep with down rod from ceiling hook at any locations and rewinding with super enameled copper wire of appropriate gauge including replacement of insulating materials such as laminated lethroid paper, sleeves, varnishing with golden colour varnish, greasing/ oiling of bush and ball bearings, replacement of missing/ worn out nuts, bolts, washers, split pin etc. and testing after reassembling and refixing back on the same location and connecting complete all as specified and directed.

Supply and replacement of Ball bearing No 6201 /6202 suitable for 1200/1400 mm sweep ceiling fan and exhaust fan of 300mm sweep of any model complete all as specified and directed by the Engineer – in – Charge.

M&L for disconnecting and taking down exhaust fan of 300mm sweep from the existing location and rewinding with super enameled copper wire of suitable gauge including replacement of insulating materials such as laminated lethroid paper, sleeves, varnishing with golden colour varnish, greasing, lubricating, replacement of missing/ worn out nuts, bolts, washers, split pins etc. and testing, including reassembly and refixing back on the same location complete all as specified and directed.

Supply and replacement of louvers suitable for exhaust fan of size 300mm sweep complete all as specified and directed.

Supply only insulated unsheathed flexible wire copper conductor 1100 volt house wire grade confirm to IS 694/1990 0.75 sqmm twin core including making connection complete all as specified and as directed

GS Engineers

Jai Maa Electrical Works

PARTAP ENGINEERING WORKS

HARISH SALES CORPORATION