Construction of Toilet block at Govt. Sen. Sec. School Bandal Tehsil Balichowki Distt. Mandi HP SH. C.o Toilet block including urinals pot and septic tank Deposit

Earth work in excavation by mechanical means (Hydraulic excavator)/ manual means over areas (exceeding 30 cm (thirty centimeter) in depth, 1.5 m (one point five meter) in width as well as 10 squar meter (Ten square meter) on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, (One point five meter) with in all lead and lift as per entire satisfaction and direction of Engineer-in-Charge.

Providing and laying in position cement concrete 1:5:10 (One cement : Five coarse sand): Ten graded stone aggregate 40 mm (Forty milimeter) nominal size of specified grade excluding the cost of centering and shuttering - All work up to plinth level with in all lead and lift as per entire satisfaction and direction of Engineer-in-Charge.

Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (One cement : six coarse sand : twelve graded stone aggregate 20 mm (Twenty millimetre) nominal size) upto plinth level with cement mortar 1:6 (One cement : six coarse sand) including carriage of material with in all leads and lifts and other incidentals and as per the direction of the Engineer-in-Charge.

Providing and laying cement concrete - all works upto plinth level : 1:3:6 (One Cement : three coarse sand : six graded stone aggregate 20 mm (Twenty milimeter) nominal size) with in all lead and lift as per entire satisfaction and direction of Engineer-in-Charge.

Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 (seven point five) in foundations and plinth in : cement mortar 1:4 (One cement : Four coarse sand) with in all lead and lift as per entire satisfaction and direction of Engineer-in-Charge.

Providing wood work in frame, as of door windows celeresotry window and other frames wrought frames and fixed in position. In 2nd class deodar wood (Based on HPSR 2009) with in all lead and lift as per entire satisfaction and direction of Engineer-in-Charge.

Providing and fixing panelled glazed or panelled and glazed shutterts for doors, windows and clerestory windows including black enamelled iron butt hinges with necessary screws 40mm (forty milimeter) thick 2nd class deodar wood, details of cost for shutters of a door (half glazes and half penelled) 200cm x 108cm (two hundred into one hundred eight centimeter) 2.16 square meter 35 mm (thirty five milimeter) thick with in all lead and lift as per entire satisfaction and direction of Engineer-in-Charge.

Centering and shuttering including strutting, propping etc. and removal of form for all heights; Suspended floors, roofs, landings, balconies and access platform with in all lead and lift as per entire satisfaction and direction of Engineer-in-Charge.

Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (one cement : one point five coarse sand) : three graded stone aggregate 20 mm (twenty milimeter) nominal size) with in all lead and lift as per entire satisfaction and direction of Engineer-in-Charge.

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level with in all lead and lift as per entire satisfaction and direction of Engineer-in-Charge.

12 mm (Twenty milimeter) cement plaster :1:6 (One cement : Six fine sand) with in all lead and lift as per entire satisfaction and direction of Engineer-in-Charge.

Providing and fixing Stainless steel sliding door bolts, ISI marked , with nuts and screws etc. complete 250x16 mm (two hundred fifty x sixteen millimeter) mm with in all lead and lift as per entire satisfaction and direction of Engineer-in-Charge.

Providing and fixing stainless steel tower bolts, ISI marked, with necessary screws etc. :150x10 mm (one hundred fifty x ten millimeter) with in all lead and lift as per entire satisfaction and direction of Engineer-in-Charge.

Providing and fixing Stainless steel handles, ISI marked,, with necessary screws etc. complete : 125 mm (one hundred twenty five) with in all lead and lift as per entire satisfaction and direction of Engineer-in-Charge.

Providing and laying Antiskid digital Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), Jointing with grey cement slurry @ 3.3 kg/sqm including pointing the joints with white cement and matching pigment etc., complete of Johnson/ Kajaria/ AGT Tiles/ RAK/ Orient Bell or its equivalent with in all lead and lift as per entire satisfaction and direction of Engineer-in-Charge.

Providing And fixing Ceramic glazed Digital tiles 300x600 x 10 mm thick of approved Shade and manufacturer in skirting risers of steps and dado 12 mm (twelve millimeter) thick cement mortar 1:3(1 cement :3 sand) and jointed with cement slurry with in all lead and lift as per entire satisfaction and direction of Engineer-in-Charge.

Providing and fixing high pressure PVC spigot and socket, waste and ventilating pipes ISI marked including fixing with approved adhesive etc. complete 75 mm (seventy five millimeter) with in all lead and lift as per entire satisfaction and direction of Engineer-in-Charge.

Providing and fixing high pressure PVC spigot and socket, waste and ventilating pipes ISI marked including fixing with approved adhesive etc. complete 110 mm (one hundred ten millimeter) with in all lead and lift as per entire satisfaction and direction of Engineer-in-Charge.

Providing and fixing PVC door bend with ovalaccess door, insertion rubber washer 3 mm (three millimeter) thick bolts and nuts ISI marked complete including fixing with approved adhesive etc with in all lead and lift as per entire satisfaction and direction of Engineer-in-Charge. 75 mm (seventy five millimeter) dia

110 mm (one hundred ten millimeter) dia

Providing and fixing PVC floor trap of self cleaning design including fixzing with approved adhesive, cost of cutting and making good the wall and floors etc. complete. 110mm x 90mm (One hundred ten into ninty milimeter) with in all lead and lift as per entire satisfaction and direction of Engineer-in-Charge

Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion.PVC Tee75mm with in all lead and lift as per entire satisfaction and direction of Engineer-in-Charge

Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion. PVC Tee 110mm with in all lead and lift as per entire satisfaction and direction of Engineer-in-Charge

Providing and fixing Gents urinal size even in white shade of Hindware/ Perryware/Esscoby Jaquar/Cera or Equivalent with in all lead and lift as per entire satisfaction and direction of Engineer-in-Charge

Providing and fixing water closet Squatting pan ( Indian type W.C. apn) with 100 mm sand cast iron P or S Trap, 10 liter low level white P.V.C. Flushing cisteren including flush pipe, with manually controlled device ( Handle lever) confirming to IS : 7231, with all fittings and fixture complete, including cutting and making good the wall and floors whereever required: white Vitereous china Orrissa pattern W. C. pan of size 580x 440 mm with integral type foot rest in white shade of Hindware/ Perryware/Esscoby Jaquar/Cera or Equivalent complete with in all lead and lift as per entire satisfaction and direction of Engineer-in-Charge

Providing and fixing Anglo Indian W.C. no. 2061 size 57X46 cm in white shade of Hindware/ Perryware/Esscoby Jaquar/Cera or Equivalent complete with in all lead and lift as per entire satisfaction and direction of Engineer-in-Charge

Providing and fixing wash basin no 1012 of size 45x35 cm In White Shade of Perryware /jaquar/ Hindware/ Cera or equivalent including cutting holes & making good the same and carriage of materials within all leads and lifts :- Of Superior with in all lead and lift as per entire satisfaction and direction of Engineer-in-Charge

Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc. External work 15 mm nominal bore with in all lead and lift as per entire satisfaction and direction of Engineer-in-Charge

Providing and Placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank with in all lead and lift as per entire satisfaction and direction of Engineer-in-Charge

Applying priming coat: With ready mixed pink or Grey primer of approved brand and manufacture on wood work (hard and soft wood) with in all lead and lift as per entire satisfaction and direction of Engineer-in-Charge.

Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture with in all lead and lift as per entire satisfaction and direction of Engineer-in-Charge.

Providing and applying white cement based putty of average thickness 1 mm, (One milimeter) of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.with in all lead and lift as per entire satisfaction and direction of Engineer-in-Charge.

Finishing walls with 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives.New work (Two or more coats applied @ 1.43 litre/ 10 square meter. Over and including priming coat of exterior primer applied @ 0.90 litre/10 squar meter.with in all lead and lift as per entire satisfaction and direction of Engineer-in-Charge.

Providing and Fixing Pillar cock of Jaquar or equivalent as per direction complete with in all lead and lift as per entire satisfaction and direction of Engineer-in-Charge

Providing and fixing C.P. brass long nose bib cock of Jaquar or equivalent single control of approved quality conforming to IS standards. 15 mm nominal bore with in all lead and lift as per entire satisfaction and direction of Engineer-in-Charge