State plan Installing pump house and Erection of Subermisible Motor Pumpset and interlinking to the existing line at Nechur area at Tarur

Amount

SUPPLY AND FIXING SUBMERSSIBLE MOTOR PUMP SET

OD268119/2024-2025:1) Supply, erection, testing and commissioning of KWA prequalified reputed make tube well submersible pump set with SS impeller, SS shaft and CI pump casing suitable for bore well with 180 mm dia inner casing pipe. The duty condition is as follows 2) Motor - Supply, erection, testing and commissioning of KWA prequalified reputed make vertical solid shaft foot mounted TEFC 3phase induction motor suitable for the above pump set working 3 phase, 50 Hz , 415 V working in AC supply. 3) Soft Starter - Supply erection, testing and commissioning of suitable rating (Fully automatic ) starter for the above motor with over voltage and under voltage protection , single phase preventer, over load relay with motor protection relay complete 4) Panel board (suitable for operating two pump sets bunt one pump set at a time ). 5) Valves- Supply of suitable size best quality heavy duty ISI marked double flanged sluice and Non return valves with suitable pressure rating. Fitting of valves shall include proper RCC support especially for Non return valve. 6) Suction and delivery pipe connections - Supply and fitting of suitable size best quality G I pipe (Medium) for total length of 10 meter suitable for the above pump set connecting the delivery side of the pump with valves and suitable specials to connect with the pumping main. 7) Supply and installation of suitable glycerin filled pressure gauge. 8) Maintenance for a period of two years

OD268123/2024-2025:Supply conveying and fixing of three phase, 415 volt and 50 Hz module for mobile starter & submerssible controller conforms to IS/IEC 60947-4-1 with features of auto restart, vibration proof enclosure with IP54 protection class, ON/OFF , voltage and ampere indication and protection against overload, single phasing , phase reversal , phase imbalance. etc

OD268122/2024-2025:Supply and erecting 27 Gauge 63mm/2" dia uPVC submerssible column pipe. including cost of pipe and specials and all labour charges,hire charges of machineries ,etc. complete as per the direction of departmental officers

OD268120/2024-2025:Supplying and fixing 6 sq mm three core flat submersible cable

OD268121/2024-2025:Providing and fixing 63mm pvc casing pipe for cable ,including earth work,cost of materials and all labour charges.etc complete as per the direction of departmental officers.

OD5472/2025-2026:Supply 15Hp submerssible motor pumpset as KWA prequalified reputed make, having Head 150m and Discharge 5lps. Including conveyance charge upto section office store and loading/unloading charges .

CONSTRUCTION OF PUMP HOUSE

2.6.1:Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including disposal of excavated earth, lead up to 50 m and lift up to 1.5 m, disposed earth to be levelled and neatly dressed.All kinds of soil

4.1.8:Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 nominal size)

50.6.1.4:Solid block masonry using pre cast solid blocks (Factory made) of size 30x20x20cm or nearest available size confirming to IS 2185 part I of 1979 for foundation and plinth with thickness 20cm and above in: CM 1:6 ( 1 cement : 6 coarse sand ) etc complete

13.9.2:Cement plaster 1:3 ( 1 cement : 3 coarse sand) finished with a floating coat of neat cement.20 mm cement plaster

5.18.1:Providing precast cement concrete jali 1:2:4 ( 1 cement : 2 coarse sand : 4 graded stone aggregate 6 mm nominal size) reinforced with 1.6 mm dia mild steel wire including centering and shuttering, roughening cleaning, fixing and finishing in cement mortar 1:3 (1 cement : 3 fine sand ) etc. complete excluding plastering of the jambs, sills and soffits.50 mm thick

5.13:Providing, hoisting and fixing up to floor five level precast reinforced cement concrete in small lintels not exceeding 1.5 m clear span up to floor five level, including the cost of required centering, shuttering but excluding the cost of reinforcement, with 1:1.5:3 (1 cement : 1.5 coarse sand (Zone - III) : 3 graded stone aggregate 20 mm nominal size)

10.5.1:Providing and fixing 1 mm thick M.S. sheet door with frame of 40x40x6 mm angle iron and 3 mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a priming coat of approved steel primer.Using M.S. angels 40x40x6 mm for diagonal braces

13.43.1:Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface:Water thinnable cement primer

OD3808/2025-2026:Towards the charges of lettering of scheme details in pump house structure using approved paint as per the direction of departmental officers.

LINKING BORE WELL WITH EXISTING PUMPING MAIN

OD268125/2024-2025:Linking of existing pipe line to new bore well pumping line, including all labour charges and charges for hire and conveyance of tools and plant, cost of consumable charges for lighting ,watching,ribbon fencing,caution boards,traffic diversion,as per the direction of departmental officers etc.

16.78.2:Construction of granular sub- base by Providing close graded Material conforming to specifications, mixing in a mechanical mix plant at OMC, Carriage of mixed material by tippers to work site, for all leads & lifts, spreading in uniform layers of specified thickness with motor grader on prepared surface and compacting with vibratory power roller to achieve the desired density, complete as per specifications and directions of Engineer-in- Charge.With material conforming to Grade-II (size range 53 mm to 0.075 mm ) having CBR Value-25

KSEB Charges

OD268130/2024-2025:Total Cost of KSEB Connection charges

MURALI K (BID ID -2217587)

Bidder Name

M SIVADAS

MURALI K