DG ADDL. MAHAD INDUSTRIAL AREA. M and R to effluent distribution scheme for Additional Mahad and Five star Industrial Area Supplying, erecting and commissioning of D.P. Structure along with distribution transformer

Supplying & erecting D. P. Structure to support HT cables with R.S.J. Pole . HT cable support structure includes the A. B. Switch 200 Amps , Top channel for erection of A.B. Switch & A.B. Switch handle etc. with necessary clamps, Nut-bolts, top clip, insulators etc. complete with caution board & barbed wire. D.P. Structure shall be erected in c.c. foundation complete.

Supplying & erecting D. P. Structure for 22/0.415 kV Transformer with R.S.J. Pole . Transformer D.P. Structure includes the A. B. Switch 200 Amps, D.O. fuse Set & L.A. Set , Top channel for erection of A.B. Switch & 2 Nos. Base channel for erecting Transformer Channel of size 75 x40 mm for erecting D.O. Fuse Set, L.A., A.B. Switch handle etc. with necessary clamps, Nut-bolts, V cross arm, top clip, insulators etc. complete with caution board & barbed wire. D.P. Structure shall be erected in c.c. foundation complete.

Hermetically Sealed transformer (SS-TR-HSL)----------------- Supplying, installing, testing & commissioning 3 phase, 22/0.433 kV, 50 Hz., 63 kVA, Mineral oil immersed and naturally cooled outdoor type, copper wound, without gas cushioning , hermetically Sealed transformer, delta/star connected with additional neutral brought out on load side, temperature rise should not exceed 40? by thermometer in oil and 45? by the resistance method in winding at full load rating, using type A winding insulation (kraft paper) with HV tapping (with off load tap changer) off load +2.5 to -5 in steps of 2.5%, having 4 number of tap positions, with standard accessories complete with test certificate with losses below 357 Watts at 50% load, 1197 Watts at 100% load as per IS:1180 (part 1) : 2014 with necessary permissions of Electrical Inspector, as per specification no SS- TR-HSL.

2) For use of transformer with copper winding for 63/100/160 kVA capacity. ( To be used only for Licensee Job), rates shall be increased by 33 % from the rates for Transformer with aluminium winding.)---------------------Supplying,erecting and commissioning of 8 way LT Feeder Pillar for Distribution transformer.

HT Cables (CB-HT)-------------- Supplying , erecting & terminating XLPE insulated galvanised steel formed wire armoured (strip) cable 22 kV(E), 3 x 95 sq. mm. aluminium conductor laid in provided trench / pipe as per specification no. CB-HT

Cable Joints & End Termination Kits (HT Cables) (CB-JT/HT)------------- Providing and erecting Heat shrinkable outdoor termination kit for 11 kV (UE)/ 22 kV ( E ) XLPE HT cable 3x up to 95 sq. mm. with necessary material as per specification no. CB-JT/HT

Shifting of existing installed street light feeder and MSEDCL power meter to new location.

LT Cables (Aluminum) (CB-LT/AL)----------- Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable, 1100 V 3½ core 25 sq. mm. aluminium conductor complete erected with glands & lugs on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL

Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable, 1100 V 4 core 10 sq. mm. aluminium conductor complete erected with glands & lugs on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL

Cable Enclosures (CB-CE)------------- Supplying & laying (including excavation) half round reinforced cement concrete pipe of NP-2 class of 150 mm diameter in proper line, level and slope including providing and fixing collars in cement mortar 1:2 and curing etc. complete.