Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹39.7 LAccepted-AOC | ₹39.7 L | L1 | Accepted-AOC AOC |
| 2 | L2₹39.9 LRejected-Finance A 8 YAHODUTTA SOCIETY KASBA PETH PUNE 411011 | PUNE | PUNE | MAHARASHTRA | 411011 | ₹39.9 L | L2 | Rejected-Finance Rejected |
| 3 | L3₹40.4 LRejected-Finance FLAT NO 105 2A SURVEY NO 30 2 MORAYA HEIGHTS DHANKAWADI PUNE 411043 | PUNE | PUNE | MAHARASHTRA | 411043 | ₹40.4 L | L3 | Rejected-Finance Rejected |
| Sl No | Description | Qty | Unit | AV AND COMPANY L2 | RAJMUDRA ENTERPRISES L1 | SWAMIRAJ CORPORATION L3 |
|---|---|---|---|---|---|---|
| 1.00 | Providing and supplying at site of ductile iron / spheroidal graphite (S.G.) iron D/F non- rising spindle resil-ient seated glandless sluice valves with handwheel &without bypass arrangement. Valves in accordance with BS 5163 of PN-10/ 16 rated, with body and bonnet of ductile iron confirming to IS 1865 Gr. 500/7 or Gr.400/15. Wedge fully encapsulated WRAS approved EPDM rubber (approved for drinking water), Wedge nut of brass,shaft of stainless steel 1.4021/1.4104, stem seals min. 3 nos. of NBR, internal fasteners of stainless steel A2. Body& Bonnet coated inside & outside with electrostatically applied epoxy powder coated blue colour (suitable for drinking water) as per DIN 30677- 2 & GSK guidelines with a coating thickness of min. 250 microns. Valves should be full bore & tight shut-off. Flange drilling as per IS 1538 raised face & pressure testing at manufactures works shall be done as per IS 14846. including transportation charges excluding GST levied by GOI & GOM in all respect etc. complete. (For PN 10 & 16) - 150 mm. | 2 | Number | 16,849 ₹33,698 Lowest | 20,000 ₹40,000 | 16,849 ₹33,698 Lowest |
| 2.00 | 250 mm. | 3 | Number | 47,375 ₹1,42,125 Lowest | 50,000 ₹1,50,000 | 47,375 ₹1,42,125 Lowest |
| 3.00 | Providing and supplying at site of ductile iron /spheroidal graphite (S.G.) iron D/F double eccentric resilient seated short body butterfly valves with gear box & handwheel, without bypass arrangement. Valves in accordance with BS EN 593 of PN 10/16 rated, with body & disc of ductile iron confirming to EN 1563/IS 1865 Gr.500/7 or Gr.400/15, Body seat of intergral SG Iron/S.S. AISI 316, seal retaining ring of steel C45/S.S. 1.4436, Shaft of S.S. 1.4021, Periferial disc seal and “O” rings of WRAS approved EPDM rubber (suitable for drinking water), Internal fasteners of stainless steel A2. Body & disc coated inside & outside with electrostatically applied epoxy powder coated blue colour. (suitable for drinking water.) as per DIN 30677- 2 & GSK guidelines with a coating thickness of min. 250 microns. Valves should be 100% tight shutoff. Face to face is per IS 13095 short body. Flange drilling as per IS 1538 raised face & pressure testing at manufactures works shall be done as per IS 13095. including transportation charges excluding GST levied by GOI & GOM in all respect etc. complete. - 450 mm. | 1 | Number | 1,69,228 ₹1,69,228 Lowest | 1,75,000 ₹1,75,000 | 1,69,228 ₹1,69,228 Lowest |
| 4.00 | Lowering, laying and jointing in position following C.I.D/F Reflex valves, Butterfly valves and Sluice valves including cost of all labour jointing material, including nut bolts and giving satisfactory hydraulic testing etc. complete. (Rate for all class of valves.) -- Lowering,laying and jointing in position following C.I.D/F Reflex valves, Butterfly valves and Sluice valves -- 6) 150 mm. | 2 | Number | 3,998 ₹7,996 | 3,900 ₹7,800 Lowest | 3,998 ₹7,996 |
| 5.00 | 8) 250 mm. | 3 | Number | 5,420 ₹16,260 | 5,400 ₹16,200 Lowest | 5,420 ₹16,260 |
| 6.00 | 12) 450 mm. | 1 | Number | 9,944 ₹9,944 | 9,900 ₹9,900 Lowest | 9,944 ₹9,944 |
| 7.00 | Manufacturing, providing and supplying spirally welded / ERW/ SAW / fabricated M. S. pipes (Commercial Quality) including procurements of plates, gas cutting to required size rolling, tack welding assembling in suitable lengths to form pipes, welding on automatic welding machine and forming ‘V’ edge on both ends of pipes including railway freight, insurance, unloading from railway wagon, loading into truck, transport to stores, unloading, stacking, excluding GST levied by GOI & GOM in all respect etc. complete as per IS - 3589 and IS-5504 as applicable as per specifications (No negative tolerance in thickness is permissible). -- Dia of Pipe : 200.00 mm (I. D.) Thickness of pipe : - 4) iv) 8.00 mm. | 6 | Running Meter | 3,860 ₹23,160 | 3,850 ₹23,100 Lowest | 3,860 ₹23,160 |
| 8.00 | Dia of Pipe : 250.00 mm (I. D.) Thickness of pipe : - 6) 10.00mm. | 6 | Running Meter | 6,031 ₹36,186 | 6,000 ₹36,000 Lowest | 6,031 ₹36,186 |
| 9.00 | Dia of Pipe : 450.00 mm (I. D.) Thickness of pipe : - 6) 10.00mm. | 6 | Running Meter | 10,670 ₹64,020 | 10,500 ₹63,000 Lowest | 10,670 ₹64,020 |
| 10.00 | CI PIPES -- Providing and supplying ISI standard M S s pecials of required thickness with 3 coats of approved make epoxy paint (Shalimar, Ciba or Mahindra & Mahindra make) from inside and outside excluding all statutory duties & taxes such as GST levied by GOI & GOM in all respect, inspection charges, transportation to stores / site, and stacking, etc. complete. - 2) Only flanges with machining and drilling holes, etc. com-plete more than 40 mm thick. | 60 | kilogram | 98 ₹5,880 | 90 ₹5,400 Lowest | 98 ₹5,880 |
Tender Value
₹39.9 L
EMD Value
₹40,000
Closing Date
29 May 2026, 5:00 pmClosed
SE E and M Comm Andheri, Mumbai
SE E and M Comm Andheri, Mumbai
DG RATNAGIRI INDUSTRIAL AREA. M and R to Ratnagiri WSS. Enhancement of Filter Bed No.2 Equipments at WTP Chalkewadi.
2026_MIDC_1303221_1
39,90,934.00
Open Tender
Support/Maintenance Service
Item Rate
Ratnagiri Industrial Area..
Please refer Tender documents.
2 documents required · 2 mandatory
₹10,030
₹40,000
12 Aug 2026
15 May 2026
2 Jun 2026
15 May 2026
29 May 2026
19 May 2026
15 May 2026 - 18 May 2026
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Providing and supplying at site of ductile iron / spheroidal graphite (S.G.) iron D/F non- rising spindle resil-ient seated glandless sluice valves with handwheel &without bypass arrangement. Valves in accordance with BS 5163 of PN-10/ 16 rated, with body and bonnet of ductile iron confirming to IS 1865 Gr. 500/7 or Gr.400/15. Wedge fully encapsulated WRAS approved EPDM rubber (approved for drinking water), Wedge nut of brass,shaft of stainless steel 1.4021/1.4104, stem seals min. 3 nos. of NBR, internal fasteners of stainless steel A2. Body& Bonnet coated inside & outside with electrostatically applied epoxy powder coated blue colour (suitable for drinking water) as per DIN 30677- 2 & GSK guidelines with a coating thickness of min. 250 microns. Valves should be full bore & tight shut-off. Flange drilling as per IS 1538 raised face & pressure testing at manufactures works shall be done as per IS 14846. including transportation charges excluding GST levied by GOI & GOM in all respect etc. complete. (For PN 10 & 16) - 150 mm. | 2 | Number | 67,001 | ₹1,34,002 |
| 2 | 250 mm. | 3 | Number | 67,001 | ₹2,01,003 |
| 3 | Providing and supplying at site of ductile iron /spheroidal graphite (S.G.) iron D/F double eccentric resilient seated short body butterfly valves with gear box & handwheel, without bypass arrangement. Valves in accordance with BS EN 593 of PN 10/16 rated, with body & disc of ductile iron confirming to EN 1563/IS 1865 Gr.500/7 or Gr.400/15, Body seat of intergral SG Iron/S.S. AISI 316, seal retaining ring of steel C45/S.S. 1.4436, Shaft of S.S. 1.4021, Periferial disc seal and “O” rings of WRAS approved EPDM rubber (suitable for drinking water), Internal fasteners of stainless steel A2. Body & disc coated inside & outside with electrostatically applied epoxy powder coated blue colour. (suitable for drinking water.) as per DIN 30677- 2 & GSK guidelines with a coating thickness of min. 250 microns. Valves should be 100% tight shutoff. Face to face is per IS 13095 short body. Flange drilling as per IS 1538 raised face & pressure testing at manufactures works shall be done as per IS 13095. including transportation charges excluding GST levied by GOI & GOM in all respect etc. complete. - 450 mm. | 1 | Number | 67,001 | ₹67,001 |
| 4 | Lowering, laying and jointing in position following C.I.D/F Reflex valves, Butterfly valves and Sluice valves including cost of all labour jointing material, including nut bolts and giving satisfactory hydraulic testing etc. complete. (Rate for all class of valves.) -- Lowering,laying and jointing in position following C.I.D/F Reflex valves, Butterfly valves and Sluice valves -- 6) 150 mm. | 2 | Number | 67,001 | ₹1,34,002 |
| 5 | 8) 250 mm. | 3 | Number | 67,001 | ₹2,01,003 |
| 6 | 12) 450 mm. | 1 | Number | 67,001 | ₹67,001 |
| 7 | Manufacturing, providing and supplying spirally welded / ERW/ SAW / fabricated M. S. pipes (Commercial Quality) including procurements of plates, gas cutting to required size rolling, tack welding assembling in suitable lengths to form pipes, welding on automatic welding machine and forming ‘V’ edge on both ends of pipes including railway freight, insurance, unloading from railway wagon, loading into truck, transport to stores, unloading, stacking, excluding GST levied by GOI & GOM in all respect etc. complete as per IS - 3589 and IS-5504 as applicable as per specifications (No negative tolerance in thickness is permissible). -- Dia of Pipe : 200.00 mm (I. D.) Thickness of pipe : - 4) iv) 8.00 mm. | 6 | Running Meter | 67,001 | ₹4,02,006 |
| 8 | Dia of Pipe : 250.00 mm (I. D.) Thickness of pipe : - 6) 10.00mm. | 6 | Running Meter | 67,001 | ₹4,02,006 |
| 9 | Dia of Pipe : 450.00 mm (I. D.) Thickness of pipe : - 6) 10.00mm. | 6 | Running Meter | 67,001 | ₹4,02,006 |
| 10 | CI PIPES -- Providing and supplying ISI standard M S s pecials of required thickness with 3 coats of approved make epoxy paint (Shalimar, Ciba or Mahindra & Mahindra make) from inside and outside excluding all statutory duties & taxes such as GST levied by GOI & GOM in all respect, inspection charges, transportation to stores / site, and stacking, etc. complete. - 2) Only flanges with machining and drilling holes, etc. com-plete more than 40 mm thick. | 60 | kilogram | 67,001 | ₹40,20,060 |
stage.html
html • 0.04 MB
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.71 MB
BOQ_2237428.xls
BOQ • 0.30 MB
TenderDocument.pdf
Tender Documents • 0.33 MB
ItemSpecification.pdf
Other Document • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at [email protected].