GENERAL AMC 2023 24 Maintenance of various LI Schemes in Chowara area under Electrical L I Section Aluva. General Electrical Work

Amount

Lifting

OD206621/2023-2024: Lifting the 120 HP motor after disconnecting the wire connection, decoupling the pump, detaching from the base plate, starters, TP switches etc. and placing them conveniently on the platform.

OD206622/2023-2024: Lifting the 80 HP motor after disconnecting the wire connection, decoupling the pump, detaching from the base plate, starters, TP switches etc. and placing them conveniently on the platform.

OD206623/2023-2024: Lifting the 75 HP motor after disconnecting the wire connection, decoupling the pump, detaching from the base plate, starters, TP switches etc. and placing them conveniently on the platform.

OD206624/2023-2024: Lifting the 50 HP motor after disconnecting the wire connection, decoupling the pump, detaching from the base plate, starters, TP switches etc. and placing them conveniently on the platform.

OD206625/2023-2024: Lifting the 45 HP motor after disconnecting the wire connection, decoupling the pump, detaching from the base plate, starters, TP switches etc. and placing them conveniently on the platform.

OD206626/2023-2024: Lifting the 40 HP motor after disconnecting the wire connection, decoupling the pump, detaching from the base plate, starters, TP switches etc. and placing them conveniently on the platform.

OD206627/2023-2024: Lifting the 35 HP motor after disconnecting the wire connection, decoupling the pump, detaching from the base plate, starters, TP switches etc. and placing them conveniently on the platform.

OD206629/2023-2024: Lifting the 25 HP motor after disconnecting the wire connection, decoupling the pump, detaching from the base plate, starters, TP switches etc. and placing them conveniently on the platform.

OD206630/2023-2024: Lifting the 5 HP motor after disconnecting the wire connection, decoupling the pump, detaching from the base plate, starters, TP switches etc. and placing them conveniently on the platform.

OD206628/2023-2024: Lifting the 3HP motor after disconnecting the wire connection, decoupling the pump, detaching from the base plate, starters, TP switches etc. and placing them conveniently on the platform.

Lowering/Refitting

OD206650/2023-2024:Lowering down and erecting 120 HP motor, starter and other electrical accessories,( Accessories when necessary ) and erecting the motor on the base plate coupling with pump, erecting the starter regulator TP switch etc in position giving connections checking correct alignment and trial run on full load

OD206652/2023-2024:Lowering down and erecting 80 HP motor, starter and other electrical accessories,( Accessories when necessary ) and erecting the motor on the base plate coupling with pump, erecting the starter regulator TP switch etc in position giving connections checking correct alignment and trial run on full load

OD206653/2023-2024:Lowering down and erecting 75 HP motor, starter and other electrical accessories,( Accessories when necessary ) and erecting the motor on the base plate coupling with pump, erecting the starter regulator TP switch etc in position giving connections checking correct alignment and trial run on full load

OD206654/2023-2024:Lowering down and erecting 50 HP motor, starter and other electrical accessories,( Accessories when necessary ) and erecting the motor on the base plate coupling with pump, erecting the starter regulator TP switch etc in position giving connections checking correct alignment and trial run on full load

OD206655/2023-2024:Lowering down and erecting 45 HP motor, starter and other electrical accessories,( Accessories when necessary ) and erecting the motor on the base plate coupling with pump, erecting the starter regulator TP switch etc in position giving connections checking correct alignment and trial run on full load

OD206656/2023-2024:Lowering down and erecting 40 HP motor, starter and other electrical accessories,( Accessories when necessary ) and erecting the motor on the base plate coupling with pump, erecting the starter regulator TP switch etc in position giving connections checking correct alignment and trial run on full load

OD206657/2023-2024:Lowering down and erecting 35 HP motor, starter and other electrical accessories,( Accessories when necessary ) and erecting the motor on the base plate coupling with pump, erecting the starter regulator TP switch etc in position giving connections checking correct alignment and trial run on full load

OD206658/2023-2024:Lowering down and erecting 25 HP motor, starter and other electrical accessories,( Accessories when necessary ) and erecting the motor on the base plate coupling with pump, erecting the starter regulator TP switch etc in position giving connections checking correct alignment and trial run on full load

OD206659/2023-2024: Lowering down and erecting 5HP motor and erecting the motor on the base plate coupling with pump in position giving connections checking correct alignment and trial run on full load

OD206660/2023-2024: Lowering down and erecting upto 3HP motor/vacuum motor pump set and erecting the motor on the base plate in position giving connections checking correct alignment and trial run on full load

Accessories Supply and Other Items

OD219398/2023-2024:Supply and fitting Digital Multifunction meter to read: VA,PF,KW,KWh, accuracy class-1 LCD

OD220062/2023-2024:Supply and fitting 40 A 3 pole power contactor of type MNX40 , L&T or Schneider make giving connections etc. as required.

OD220070/2023-2024:Supply and fixing over load Relay of L & T make MN 2, 24-40 A, suitable to direct mounting on MNX 9-40 or equivalent

OD220071/2023-2024:Supply and fixing star delta timer 3-120 sec, 240-415V 50HZ AC,L&T make or Equivalent

Supply and Erection of Vaccum MP Set

OD219344/2023-2024:Supply , Conveyance and erection of of Kirloskar make 3.7KW/5HP Vaccum Pump Model DV 40, Suc. 40mmX Del 40mm, having 5 m3/hr to 65 m3/hr air flow at 640 to 100 vacuum in mm of Mercury coupled to Kirloskar make 5 HP, 1450 RPM TEFC Sq. cage Induction motor.

supply and Renewal of MS PIPE in various LI schemes

OD242467/2023-2024:Dismantling the existing MS delivery pipe of size 400mmpiece by piece after providing scaffolding supports, with out further damages including MS bent , accessories etc. and stacking at the yard

OD242519/2023-2024:Supply and providing the rough cut flange ring joint 15 mm thick for 400 mm MS pipe after facing the cutting edges of flange rings neatly and set out the flange rings in correct position to both vertical and horizontal planes and welding in two rows accurately, painting two coats of synthetic best quality enamel paint over a coats red oxide primer including providing necessary nuts and bolts , rubber packing grease etc , all labour charges for lifting and holding of pipes as per the necessity of welder at site.

OD242520/2023-2024:Supply, conveying, erecting, testing and commissioning the 400 mm dia MS pipe in suction/ delivery side having sheet minimum thickness 6.35 mm and cutting in to required length, facing the cutting edges, painting two coats of synthetic best quality enamel paint over a coats red oxide primer, including conveyance charges to pump house and labour charges for loading, unloading, etc

OD242468/2023-2024:Dismantling the existing MS delivery pipe of size 250mmpiece by piece after providing scaffolding supports, with out further damages including MS bent , accessories etc. and stacking at the yard

OD242595/2023-2024:Supply and providing the rough cut flange ring joint 12 mm thick for 250 mm MS pipe after facing the cutting edges of flange rings neatly and set out the flange rings in correct position to both vertical and horizontal planes and welding in two rows accurately, painting two coats of synthetic best quality enamel paint over a coats red oxide primer including fixing the pipe using suitable size nuts and bolts , rubber packing grease etc , in correct alignment and leakproof condition.

OD242596/2023-2024:Supply, conveying, erecting, testing and commissioning the 250 mm dia MS pipe in suction/ delivery side having sheet minimum thickness 6.35 mm and cutting in to required length, facing the cutting edges, painting two coats of synthetic best quality enamel paint over a coats red oxide primer, including conveyance charges to pump house and labour charges for loading, unloading, etc

OD242469/2023-2024:Dismantling the existing MS delivery pipe of size 200mmpiece by piece after providing scaffolding supports, with out further damages including MS bent , accessories etc. and stacking at the yard

OD242655/2023-2024:Supply, fabrication, conveyance, fixing, testing and commissioning of 200 mm size MS pipe short bend with 12 mm thick flanges at both end, fabricated from 200 mm MS pipe having 6.35 mm sheet thickness, with length not less than 0.45 meter, painting two coats of synthetic enamel paint over a coat of red oxide primer and fixing in position using fresh rubber packing, gaskit packing, bolts and nuts etc. in correct alignment and leak proof condition.

Bidder Name

FRANCIS PINHERO