S.R. work of New Underground pipeline Network from Sump to Block 30 to 37 and near SP Office at PHQ Mehsana,pared ground office & Toilet ,Drainage Line of SP Kacheri,Auditorium Building Toilet Block and Special repaire work of Repeater station at taranga, Dist.Mehsana. (Incl.Electrification work) (SR Priority 2025-26) (5th Attempt) (SBD)

No. In Words InFigure Rs.

Demolition including stacking of serviceable materilas and disposal of unserviceable Rs. One Thousand

1 materials with all lead and lift. (i) R.C.C. work 5.00 Cum. Seventy One & Paise 1071.12

Twelve Only

Dismentaling tiled of stone floors laid in mortar including stacking of serviceable materilas Rs. Forty Eight & Paise

and disposal of unserviceable materials with all lead and lift. Sixty Nine Only

Removing and scraping of old deteriorated plaster of any thickness fromm wall / R.C.C

Rs. Ninteen & Paise

3 member including stacking of serviceable material and disposal of unserviceable from site of 330.00 Smt. 19.72

Seventy Two Only

work with all lead and lift

Dismentling doors, windows, ventilators etc. (wood or steel) shutters including chowkhats Rs. One Hundred

4 architraves, holdfasts and other attachment etc. complete and stacking them within all lead 45.00 Nos. Eighty Nine & Paise 189.95

and lift.(i) Not exceeding 3 Sq.M. in area. Ninety Five Only

Dismentling C.I. pipes G.S.W.pipes abd A.C. rain water pipes with fittings and clamps Rs. Seventy Five &

5 including stacking the materials with all lead and lift ( for any dia, of pipe) 115.00 Rmt. Paise Ninety Seven 75.97

Excavation for foundation upto 1.5 Mt. depth including sorting out and stacking of useful Rs. One Hundred

6 materials and disposing of the excavated stuff for all lead and lift. [[B]Loose or soft Soil 175.00 Cum. Twenty One & Paise 121.77

Seventy Seven Only

Providing and laying cement concrete 1:2:4(1 cement :2 coarse sand : 4 Machine crushed

Rs. Three Thousand

black stone aggregate of 20mm nominal size ) and curing complete excluding cost of from

7 6.00 Cum. Five Hundred Fifty One 3551.61

work in foundation and plinth.

& Paise Sixty One Only

Filling available excavated earth (excluding rock) in trenches.plinth, Sides of Rs. One Hundred

8 Foundation etc. in layers not exceeding 20 cm, in depth consolidating each disposited layer 175.00 Cum. Thirty Five & Paise 135.56

by ramming and watering. Fifty Six Only

Providing and Applying Acrylic Polymer Coting in Cement (Polymeric addhesive) with Rs. One Hundred

9 preparing of existing surface as per direction of Engineer in Charge. 100.00 Smt. Seven & Paise 107.71

Seventy One Only

Providing and laying damp proof course 25mm thick cement concrete 1:2:4 (1- Cement : 2 Rs. Three Hundred

10 coarse sand : 4 stone aggregate 10 mm nominal size) and curing complete 100.00 Smt. Fourteen & Paise Forty 314.48

Eight Only

Providing 10mm thick cement plaster in single coat on ceilings for interior plastering and Rs. Two Hundred

11 finished even and smooth in C.M.1:3(1-cement;3-sand) including finishing with a floating coat 75.00 Smt. Thirteen & Paise 213.17

of neat cement slurry at Ground Floor Seventeen Only

Item Estimated Rate [Rs. Ps.] Amount

Description of Item Quantity Unit

No. In Words InFigure Rs.

Providing 15mm thick cement plaster in single coat on brick or concrete wall for interior Rs. Two Hundred

12 plastering and finished even and smooth in cement mortar 1:4(1-cement;4-sand) including 140.00 Smt. Thirteen & Paise 213.71

finishing with a floating coat of neat cement slurry at Ground Floor. Seventy One Only

Providing 20mm thick sand faced cement plaster on walls above ground level consisting Rs. Three Hundred

13 12mm thick backing coat of C.M.1:3 (1-cement;3-sand) and 8mm thick finishing coat of 200.00 Smt. Seventeen & Paise 317.92

C.M.1:1(1-cement;1-sand) etc.complete for any height. Ninety Two Only

Providing and laying integrated cement based proprietary water proofing treatment of

required thickness over the roof including providing and applying two coat of Acrylic polymer

of approved brand & manufactures and china mosaic fitting and finally finishing the surface

with white cement slurry and sloping out terrace slabs with following specification laid to

required slope not flotter than 1 : 80 (incl treating the vertical surface of the perapet wall upto

20cms height above finished level of terracing including finishing, curing, testing etc. comp.

Rate is incl. Ten years performance of guarantee bond to be given on stamp paper. (No

extra shall be paid for increase in thickness for proper slope).

(a) Applying two coats of Acrylic based polymer of approved brand & manufacture as per Rs. Five Hundred Sixty

14 recomodation of manufacturer over the R.C.C. Slab incl. clearing the surface before 195.00 Smt. Eight & Paise Twenty 568.28

treatment. Eight Only

(b) Finishing the surface with China Mosaic pieces laid on 10mm thick joint less cement

mortar of mix 1:3 (1 cement : 3 coarse sand) admixed with proprietary water proofing

compound conforming to IS :2645 and finally finishing the surface with trowel with neat

cement slurry.

(c) The whole terrace so finished shall be flooded with water for a minimum period of two

weeks for curing for final test.All above operations to be done in order and as directed and

specified by the engineer - in - charge.

Finishing Ceiling / Slope Surfaces with Plastic Emulsion Paint on Ceiling / Slope Surfaces

(Two Coats) to give an Required shape and even shade after thoroughly brushing the

surface to remove all dirt, and remains of loose powdered materials and finishing smooth etc.

complete. Rate are inclussive of Applying Two Coats of Lappy (Putty) and One Coat of

Primer on New Wall Surfaces to give an even shade including throughly brushing the surface

free from mortar droppings and other foreign matter and sand papered smooth. (Fine Putty Rs. One Hundred

15 Shall be of Bison Wall Putty of Berger Paint India Ltd or Trucare Wall Putty of Asian Paint 200.00 Smt. Ninety & Paise Thirty 190.32

or Dulux Polly Putty of Dulux Paint Only and Primer shall be of BP White Primer of Berger Two Only

Paint India Ltd or Asian Paint Trucare Interior Primer of Asian Paint or Interior Sealer A

of Dulux Paint Only and Plastic Emulsion Paint Shall be of Rangoli Total Care of Berger

Paint India Ltd or Apcolite Premium Emulsion of Asian Paint or Dulux Interior A 900 of Dulux

Paint Only.) etc. Complete for ALL FLOORS

Finishing Walls with Plastic Emulsion Paint on Wall Surfaces (Two coats) to give an

Required shape and even shade after thoroughly brushing the surface to remove all dirt, and

remains of loose powdered materials and finishing smooth etc. complete. Rate are inclussive

of Applying Two Coats of Lappy (Putty) and One Coat of Primer on New Wall Surfaces to

give an even shade including throughly brushing the surface free from mortar droppings and Rs. One Hundred

other foreign matter and sand papered smooth. (Fine Putty Shall be of Bison Wall Putty of 310.00 Smt. Eighty & Paise Four 180.04

Berger Paint India Ltd or Trucare Wall Putty of Asian Paint or Dulux Polly Putty of Dulux Only

Paint Only and Primer shall be of BP White Primer of Berger Paint India Ltd or Asian Paint

Trucare Interior Primer of Asian Paint or Interior Sealer A 500 of Dulux Paint Only and Plastic

Emulsion Paint Shall be of Rangoli Total Care of Berger Paint India Ltd or Apcolite Premium

Emulsion of Asian Paint or Dulux Interior A 900 of Dulux Paint Only.) etc. Complete for ALL

Item Estimated Rate [Rs. Ps.] Amount

Description of Item Quantity Unit

No. In Words InFigure Rs.

Finishing walls with Weather Proof Exterior Emulsion Paint on Wall Surfaces (Two Coats)

over and above Applying one coat of Primer to give an Required shape and even shade after

thoroughly brushing the surface to remove all dirt, and remains of loose powdered materials

and finishing smooth etc. complete. (Primer Shall be of Weather Coat Exterior Primer of

Rs. One Hundred Ten

17 Berger Paint India Ltd or Asian Paint Trucare Exterior Primer of Asian Paint or Exterior 335.00 Smt. 110.40

& Paise Forty Only

Sealer E 900 of Dulux Paint Only and Exterior Emulsion Paint shall be Weather Coat Smooth

of Berger Paint India Ltd. or Apex Weather Proof Emulsion of Asian Paint or Dulux Weather

Shield Projects of Dulux Paint Only.

Providing and laying 600mm x 600mm x 8mm in size Anti Skid Ceramic flooring tiles in

Rs. Nine Hundred

flooring, trade of steps and landing on a bed of 12mm thick cement mortar 1:3(1cement :

18 30.00 Smt. Eighty Four & Paise 984.52

Coarse sand ) finished with flush pointing in white/coloured cement.Colour should be

Fifty Two Only

Providing and laying coloured glazed tiles in skirting, risers of steps and dedo on 10mm. Rs. One Thousand

Thick cement plaster 1:3 (1cement:3coarse sand) & jointed with white cement slurry.(SIZE Four Hundred Seventy

OF TILES SHALL BE 600X300MM) Three & Paise Fifteen

Providing and fixing both side polished machine cut Granite Shelves / Partitions 18mm thick Rs. One Thousand

embaded in to wall at support including racking and finishing smooth the surface including Seven Hundred Thirty

cutting the stone as and where required etc. complete including rounding of exposed edges Eight & Paise Seventy

etc. complete. Only

Providing, Supplying and Fixing of 32mm (Total) Thick Single Flush Door Shutter with 1mm

Thick Laminates on Both Side of Shutter. Making / Construction of Flush Door is with Pine or

southern Yellow Pine Filler and 2.5mm core veneer Both Side and 0.4mm Face Veneer on

Both Side with Lock rail on Center. Flush Door Provide with Teak wood beading patti (32mm

X 12mm) on Peripheries of Flush Door with Door Frame of Non Teak Solid Wood of size

100mm x 60mm with Chemically Treated and Seasoned Including Paint Matching with

Laminates. Frame & Flush door shutter having 5 year warranty against attack of biological

agent like termite, borers, decay, fungi and harmful insects also warranty against seasoning

related issues like crack, bending, twisting, warping. Laminates on shutter shall be press by

cold press method. Shutter shall be brought to site in packed PVC bags & pvc coating shall Rs. Eight Thousand

21 be removed on completion of work in such a way that shutter & Frame is free from nail mark 16.00 Smt. Four Hundred Six & 8406.09

& any damages etc. Rates are also Inclusive of all Labors & Proviging 15cm. Long 8 No of Paise Nine Only

Hold Fast (25mm X 5mm) & 4 No of 6 Inch S.S. but Hinges, 100mm x 75 mm x 3mm thick,

required Screw & Nails per Frame and Fixing following S.S. Fixtures And Fastening.

(1) Aldrops 1 No, 250mm x 16mm & Tadi 1 No, (2) Door Stopper 1 No, 100mm Long, (3)

Double Leg Heavy Push Door Stopper 1 No & (4) Handle 2 No, 150mm Long X 10mm thick.

Door are Fixing as per Details Drawing & Instruction of Engineer in charge. All Materials

Used Shall be as Per approved Material Make List of G.S.P.H.C. The Required Frame is to

be Obtained from Vanil Udhyog Maked Only.

Providing & Fixing Solid PVC Flush Door Shutter 24mm thick,made from Co-extruded three

Layer rigid PVC foam sheet (Single Extruded) with density not less than 600kg/cbm. Outer

layer (0.8-1mm) thick should be of rigid PVC with density of not less than 1400kg/cbm. Door Rs. Four Thousand

should be water proof ,Termite proof , fire retardant & having good screw holding capacity. Five Hundred Fourteen

providing and fixing 100% solid wood plastic composite (WPC) door frame 90mmx45mm & Paise Forty Nine

made from wood plastic composite (single Extruded Process) material with density Only

780kg/cbm. all as per Specifications drawing as directed by the engineer in charge.

Item Estimated Rate [Rs. Ps.] Amount

Description of Item Quantity Unit

No. In Words InFigure Rs.

Providing and fixing Alluminium section window having extruded Aluminum Colour anodized

section frame main outer size 95mm x 24mm x 1.17mm (of Jindal Section no:2459 @ wt.of

0.738 Kg/mt), horizontal Three track member size 92mm x 31.75mm x 1.30mm (of Jindal

Section no:8688,@ Wt.1.07 Kg/mt), vertical member of size 92mm x 31.75mm x 1.50mm (of

Jindal Section no:8933,@ Wt. 1.06 Kg/mt) with sliding shutters of horizontal member size Rs. One Thousand

23 40mm x 18mm x 1.29mm (of Jindal Section no:8947@ wt.of 0.456 Kg/mt), vertical member 18.00 Smt. Nine Hundred Two & 1902.50

of size 40mm x 18mm x 1.29 mm (of Jindal Section no:8949 @ wt.of 0.456Kg/mt) with 5 mm Paise Fifty Only

thick transparent bronze colour tinted float glass with powder coated aluminum fittings and

fixtures and transparent silicon sealant glass fixing to frame as per details including one

mosquitoe jali shutter With Both Side Locking Arrangment for ALL FLOORS.

Providing and fixing standared extruded of alluminium section of size 63x38.10x1.2mm (of Rs. One Thousand

jindal section No-2434 @ wt. 0643 kg per mt) with colour Anodized coated alluminium frame One Hundred Sixty

for ventilation with 5 mm thick frosted glass as details etc.complete for ventilation. Three & Paise Ninety

Providing & fixing Concealed Center Point to wall celing & floor CPVC (SDR-13.5) PIPE

Rs. Two Hundred Six

having National Sanitation Foundation (NSF) seal For Portable Water of 20 mm. dia.

25 30.00 Rmt. & Paise Seventy Three 206.73

nominal bor tube fitting and Z clamps including making good the wall, ceiling and floor etc.

Providing & fixing Concealed Center Point to wall celing & floor CPVC (SDR-13.5) PIPE

Rs. Two Hundred Fifty

having National Sanitation Foundation (NSF) seal For Portable Water of 25 mm. dia.

26 35.00 Rmt. One & Paise Thirty 251.31

nominal bor tube fitting and Z clamps including making good the wall, ceiling and floor etc.

Providing & fixing Concealed Center Point to wall celing & floor CPVC (SDR-13.5) PIPE

Rs. Four Hundred

having National Sanitation Foundation (NSF) seal For Portable Water of 40 mm. dia.

27 130.00 Rmt. Forty Three & Paise 443.29

nominal bor tube fitting and Z clamps including making good the wall, ceiling and floor etc.

Twenty Nine Only

Providing & fixing Concealed Center Point to wall celing & floor CPVC (SDR-13.5) PIPE

Rs. Six Hundred Fifty

having National Sanitation Foundation (NSF) seal For Portable Water of 50 mm. dia.

28 435.00 Rmt. Four & Paise Four 654.04

nominal bor tube fitting and Z clamps including making good the wall, ceiling and floor etc.

Providing & fixing Concealed center point to wall celing & floor CPVC (SDR-13.5) Pipe

having National Sanitation Foundation (NSF) seal for potable water of following dia. Nominal

bore Tube fittings & clamps with All as per required fittings such as reducing coupler, union,

Rs. One Thousand

band plug, end cap, tee, hex niple, elbow, coupler, G.I. Slotted Z patti of 16 Gauge

Three Hundred Twelve

29 (minimum1.60mm thick) and minimum 6mm dia. U Clamp with Washer Nut at every 1.50mt. 170.00 Rmt. 1312.94

& Paise Ninety Four

vertical distance including All Labour Charges etc. complete with using bonding materials.

Rates are including of making good the wall ceiling & floor etc. complete. (excavation of

earth in trenches and filling will be paid separately).65mm dia

Providing & fixing Concealed center point to wall celing & floor CPVC (SDR-13.5) Pipe

having National Sanitation Foundation (NSF) seal for potable water of following dia. Nominal

bore Tube fittings & clamps with All as per required fittings such as reducing coupler, union,

Rs. One Thousand

band plug, end cap, tee, hex niple, elbow, coupler, G.I. Slotted Z patti of 16 Gauge

Seven Hundred Sixty

30 (minimum1.60mm thick) and minimum 6mm dia. U Clamp with Washer Nut at every 1.50mt. 340.00 Rmt. 1768.88

Eight & Paise Eighty

vertical distance including All Labour Charges etc. complete with using bonding materials.

Eight Only

Rates are including of making good the wall ceiling & floor etc. complete. (excavation of

earth in trenches and filling will be paid separately).80mm dia

Item Estimated Rate [Rs. Ps.] Amount

Description of Item Quantity Unit

No. In Words InFigure Rs.

Providing and fixing to wall, ceiling and floor U.PVC SWR Soil Waste Pipe with 'O' Ring

mm dia. of ISI 13592/92. Rate inclusive of All fittings like single or double 'Y' with door,

Rs. Two Hundred Fifty

reducer, coupler single 'T' with door bend, G.I. Slotted Z patti of 16 Gauge (minimum1.60mm

31 90.00 Rmt. Six & Paise Eighty One 256.81

thick) and minimum 6mm dia. U Clamp with Washer Nut at every 1.50mt. vertical distance

including All Labour Charges etc. complete and making good the Wall, Ceiling and Floor.

Providing and fixing to wall, ceiling and floor U.PVC SWR Soil Waste Pipe with 'O' Ring

110 mm dia. of ISI 13592/92. Rate inclusive of All fittings like single or double 'Y' with door,

Rs. Four Hundred

reducer, coupler single 'T' with door bend, G.I. Slotted Z patti of 16 Gauge (minimum1.60mm

32 95.00 Rmt. Eighty Five & Paise 485.22

thick) and minimum 6mm dia. U Clamp with Washer Nut at every 1.50mt. vertical distance

Twenty Two Only

including All Labour Charges etc. complete and making good the Wall, Ceiling and Floor.

Provinding and fixing in position PVC COWEL VENT to pipe 75 mm dia directed. Rs. Sixteen & Paise

Forty Seven Only

Provinding and fixing in position PVC COWEL VENT to pipe 110 mm dia directed. Rs. Twenty Eight &

Paise Sixteen Only

Providing and fixing Gun metal check or non-return fullway wheel valve.(E) 40mm dia. Rs. Six Hundred Fifty

35 10.00 Nos. Six & Paise Eighty Six 656.86

Providing and fixing Gun metal check or non-return fullway wheel valve.(E) 65 mm dia. Rs. Four Thousand

Nine Hundred Sixty

Four & Paise Three

Providing & Fixing 15mm One way Bib Tap with Wall Flange. Rate are inclusive of all

Rs. Nine Hundred

matreials, Labour & Necessary Fittings etc. Complete as per Detailed Drawings,

37 9.00 Nos. Ninety & Paise Sixty 990.61

Specifications and as per the Instruction of Engineer In charge. The Model & Make of Bib

Tap Shall be as per the Approved Make List of GSPHCL.

Providing & Fixing Two way Bib Tap with Wall Flange. Rate are inclusive of all matreials,

Rs. One Thousand

Labour & Necessary Fittings etc. Complete as per Detailed Drawings, Specifications and as

38 3.00 Nos. Three Hundred Nine & 1309.39

per the Instruction of Engineer In charge. The Model & Make of Two way Bib Tap Shall be as

Paise Thirty Nine Only

per the Approved Make List of GSPHCL.

Providing & Fixing Health Faucets (ABS Body).Providing & Fixing Health Faucets (ABS

Rs. Eight Thousand

Body). Rate are inclusive of all matreials, Labour & Necessary Fittings etc. Complete as per

Six Hundred Seventy

39 Detailed Drawings, Specifications and as per the Instruction of Engineer In charge. The 3.00 Nos. 565.51

Five & Paise Thirty

Model & Make of Health Faucets Shall be as per the Approved Make List of GSPHCL.

Providing & Fixing Angle Cock with Wall Flange . Rate are inclusive of all matreials, Labour Rs. Eight Thousand

& Necessary Fittings etc. Complete as per Detailed Drawings, Specifications and as per the Seven Hundred

Instruction of Engineer In charge. The Model & Make of Angle Cock Shall be as per the Twelve & Paise Twenty

Approved Make List of GSPHCL. Four Only

Provinding and fixing water Closet Squatting (ORRISSA TYPE W.C. PAN ) size 580mm first

Rs. One Thousand

quality including necessary "P" or "S" trap, including jointing the trap with pan & soil pipe in

41 2.00 Nos. Three Hundred Eight & 1308.90

viterous chine white colour, Joints shall be pipe sealent. Materials used for the above items

Paise Ninety Only

Must be list approved by G.S.P.H.C.L.

Item Estimated Rate [Rs. Ps.] Amount

Description of Item Quantity Unit

No. In Words InFigure Rs.

Providing & Fixing Wall Hung with PVC Flush Tank, Soft Seat Cover & intergal "P" or "S"

Trap including Jointing the Trap with Pan and Soil pipe. Wall hung shall be fixed on S.S

heavy duty rack bolt having 16mm dia, 165mm length using Plastic sleeve Make by Using Rs. Five Thousand

42 Drill Bitt Only. Rate are inclusive of all matreials, Labour & Necessary Fittings etc. Complete 3.00 Nos. Four Hundred Seventy 5470.90

as per Detailed Drawings, Specifications and as per the Instruction of Engineer In charge. & Paise Ninety Only

The Model & Make of Wall Hung & Flush Tank Shall be as per the Approved Make List of

Providing & Fixing Urinal with P.V.C water pipe, 32mm dia. C.P. brassa waste coupling with Rs. Two Thousand

Connection 32mm dia waste Pipe etc. Complete. Rate are inclusive of all matreials, Labour & Ninety Eight & Paise

43 Necessary Fittings etc. Complet as per Detailed Drawings, Specifications and as per the 4.00 Nos. Ninety Eight Only 2098.98

Instruction of Engineer In charge. Materials used for the above items Must be list approved

Providing & Fixing Single Hole Wash Basin with C.I or M.S. brackete & M. I . fisher union, Rs. Three Thousand

P.V.C water pipe with Connection from Stop Cock to Pillar Tap, PVC Bottle Trap with Six Hundred Twenty &

Connection 32mm dia. C.P. brassa waste coupling etc. Complete. Rate are inclusive of all Paise Thirty Three

44 matreials, Labour & Necessary Fittings etc. Complete as per Detailed Drawings, 6.00 Nos. Only 3935.33

Specifications and as per the Instruction of Engineer In charge. The Model & Make of Wash

Basin Shall be as per the Approved Make List of GSPHCL.(Wash Basin With All Fitting

Including Pillar Cock, Angle Cock, Bottal Trap etc.)

Providing & Fixing Single Hole Table Top Wash Basin on Granite Slab with C.I or M.S. Rs. Three Thousand

brackete & M. I . fisher union, P.V.C water pipe with Connection from Stop Cock to Pillar Tap, Six Hundred Twenty

PVC Bottle Trap with connection 32mm dia. C.P. brassa waste coupling with Connection Eight & Paise Ninety

45 32mm dia waste Pipe up to N.T etc. Complete. Rate are inclusive of all matreials, Labour & 2.00 Nos. Four Only 3326.94

Necessary Fittings etc. Complet as per Detailed Drawings, Specifications and as per the

Instruction of Engineer In charge. Materials used for the above items Must be list approved

Providing and fixing 600mm x 450mm bevelled edge mirrror of superior glass mounted on Rs. Five Hundred Sixty

46 6mm thick A.C. sheet or plywood sheet and fixing to wooden pluge with C.P. brass screws 6.00 Nos. Six & Paise Ninety 850.90

and washers. Only

Providing & Fixing PVC Multi Nahni trap -100 mm diameter with S S jali of the following Rs. Fifty Two & Paise

47 nominal diameter of self cleansing design with C.I scread down or hinged grating including 9.00 Nos. Twenty Nine Only 508.29

the cost of cutting and making good the walls.

Providing & fixing S.W. gully trap without grating brick masonary chamber & water tight C.I. Rs. One Thousand

48 Cover of size 300 mm x 300mm size with standard weight (1) square mouth trap 150mm x 11.00 Nos. Forty Seven & Paise 1176.94

100mm size "P" or "R" type. Ninety Four Only

Construction brick masonary chamber for underground C.I.inspection chamber and bends Rs. Three Thousand

with brick having crushing strength not less than 35 kg/cm2 in C:M 1:5 R.C.C. top slab with One Hundred Thirteen

1:2:4 mix with 8mm dia steel at 15 cm.c/c and foundation concrete 1:5:10 inside plaster & Paise Eighteen Only

15mm thick with cement with a floating coat of neat cement walls and bed concrete etc.

49 complete .Rates are also inclusive of outside plaster 15mm thick in C:M 1:3 from top of 15.00 Nos. 3793.18

chamber and all side upto 45 cms. deep below ground level. (A) Inside dimension

455mmx610mm and 450mm deep for SINGLE OR Multi purpose pipe line. and providing

and fixing precast rcc frame with cover(over MD10 ton (rubber mould finish) inner size

x450 mm with necessary fittings

Item Estimated Rate [Rs. Ps.] Amount

Description of Item Quantity Unit

No. In Words InFigure Rs.

Extra over above item for additional depth of 0.1 m or part thereof beyond 450mm depth Rs. Seventy Seven &

50 for brick masonary chamber for (I) 610 x 455 30.00 Nos. Paise Ninety Nine Only 239.99

Total Sch B-1 Civil cost Rs.

51A Providing and erecting Point wiring with 1.1 KV grade ISI marked 2 X 1.5 sq. mm copper 20.00 Point 425.00 Rs. Four

PVC insulted FRLS wire with 1.5 sq. mm (green) copper PVC insulated FRLS wire for earth Hundred Twenty

continuity in FIA approved ISI mark medium class white colour 20/25 mm dia. embossed rigid Five Only

PVC pipe with PVC fitting fixed with adhesive solution erected on/in Wall / slab ., 5/6 Amp.

ISI make modular type switch and accessories mounted in 20 G. G.I. metallic/PVC company

fabricated box with metal grove covered with appropriate front plate modules erected

flushed with wall / ceiling with necessary modular lamp holder / modular ceiling rose / HD

Connector for Open wiring. Light point. Cat.-II.(make and model approved by EIC and

Matching colour with switch & accessories). Length of point wiring must not increase than

mtr. For that necessary switch boards and their locations must be finalised before execution

by agency otherwise payment will not be done for extra long point. (For future extention, if

required, agency has to erect one higher size metal box and modular plate as per instruction

of EIC. Cost of blank plate shall be paid as per tender item)(Conductor Resistance should be

as per IS: 8130/1984)

51B For Fan Point (with 6 A. Modular type switch and two module hum free EME Five step type 5.00 Point 612.00 Rs. Six Hundred

Electronic fan regulator both having ISI mark) Cat.-II Twelve Only

51C For separate Point (with 6 Amp. Switch & 3/5 pin socket both having ISI mark) Cat.-II 10.00 Point 455.00 Rs. Four

Hundred Fifty

51D For Looped on switch board (with 6 Amp. Switch & 3/5 pin socket both having ISI mark ) 45.00 Point 234.00 Rs. Two

Cat.-II Hundred Thirty

52 Providing and erecting Medium Class FIA approved and ISI mark white colour (embossed) 50.00 Mtr. 24.00 Rs. Twenty Four

RIGID PVC PIPES of following size complete erected with necessary PVC fittings & Junction Only

boxes fixed with adhesive solution & clamps on / in wall / ceiling along with continuous fish

wire to draw mains with necessary fittings and junction boxes for following dia. (a) 20 mm.

53A Providing and erecting Mains with FRLS PVC Insulated wire ISI marked 1.1 KV grade with 300.00 Mtr. 62.00 Rs. Sixty Two

FIA approved ISI mark medium class white colour 20 mm dia. embossed rigid PVC pipe Only

with PVC fitting fixed with adhesive solution erected on/in brick wall / slab along with

continuous G. I. fish wire to draw mains laid in approved manner with plastering by cement

mortar & finishing the surface to match the wall / ceiling complete with FRLS PVC insulated

wire for earth continuity. (Approved ISI make only) [a] 2 x 1.5 sq.mm. FRLS copper multi

stranded conductor mains with 1.5 sq.mm. FRLS copper multi stranded conductor

earthing as per standard colour code. (Conductor resistance should be as per IS:8130/1984)

53B 2 x 2.5 sq.mm. FRLS copper multi stranded conductor mains with 1.5 sq.mm. FRLS copper 150.00 Mtr. 82.00 Rs. Eighty Two

multi stranded conductor for earthing as per standard colour code. (Conductor resistance Only

should be as per IS:8130/1984)

53C For 2 x 6.0 sq.mm. FRLS copper multi stranded conductor mains with 2.5 sq.mm. FRLS 30.00 Mtr. 146.00 Rs. One

copper multi stranded conductor earthing as per standard colour code. (Conductor Hundred Forty

resistance should be as per IS:8130/1984) Six Only

Item Estimated Rate [Rs. Ps.] Amount

Description of Item Quantity Unit

No. In Words InFigure Rs.

54 Providing & fixing 20 mm. dia. PVC insulated G.I. corrugated Flexible pipe with necessary 10.00 Mtr. 30.95 Rs. Thirty &

socket, PVC bushes saddle, Check-nuts etc. complete of following sizes. Paise Ninety

55 Providing and fixing Plug Point wiring with 1.1 KV grade ISI marked approved make 2 x 2.5 15.00 Point 678.00 Rs. Six Hundred

sq.mm copper PVC insulated FRLS wire with 1.5 sq.mm (green) copper PVC insulated Seventy Eight

FRLS wire for earth continuity in FIA approved ISI mark white colour medium class 20/25 Only

mm dia.embossed rigid PVC pipe with PVC fitting fixed with adhesive solution erected

flushed in/on wall/slab along with continuous G.I. fish wire to draw wires and laid in

approved manner complete with 16 Amp Modular type Swich and accessories mounted in

20 G. GI company fabricated metallic / PVC / Acrylic box covered with appropriate front plate

modules erected flushed with wall. (a) 16 Amp. Indicator switch & 1 No. 6/16 A universal

socket white colour suitable for 3 pin top duly both having ISI mark. Cat.-II. (Conductor

resistance should be as per IS:8130/1984)

56 Providing & Erecting 2.0 mtr long Earthing system by making minimum bore of 225 mm dia 2.00 Each 7025.00 Rs. Seven

in soft soil. Suitable for doing pipe-in-pipe technology earthing.Earthing electric rod must be Thousand

made from Corrosion free Hot dip galvanizing pipes having following specification. Twenty Five Only

(A) Earthing Electrode: outerpipe:- 88 mm minimum O.D., ISI 'B ' Class ISI mark of Reputed

Brand, Inner pipe:- 42 mm minimum O.D., Pipe B Class ISI mark reputed Brand Terminal

Size: 70mm X 100mm length, Terminal Should be made from inner pipe for that pipe must

be pressed and gave rectangular shape so its work as a terminal.The hot deep galvanising

must be done after above process.Galvanised thickness must be minimum 75 micron any

where. SS Nut bolt:- 2 no.with washer suitable for 14mm dia. hole must be provided at

terminal. total minimum Weight(approx.) of earth electrodewith inside conductive material

minimum should be 26 kg.

(B) Inner chemical (CCM Compound)- Resistivity:- 0.2 ohm/meter testing as per IEC 62561-

2017, Voltage drop:- < 1 volt at no load & dry form, Sulphar content:- <2%

(C) Back fill Compound:- Earthing compound should be capable to retain moisture for long

time Back Filling Compound weight is 25 Kg.

(D) Chamber and cover:- Earthing chamber should be size of 400 mm X 400 mm X 400 mm

depth and Cover should be heavy duty cast iron with required size of 300 mm X 300 mm X

Necessary test report must be submitted.

1. Short circuit test by ERDA/ CPRI for 25KA

2. Resistivity test of conducting material from NABL accredited lab.

3. Hot dip galvanised / zinc coating micro test from reputed laboratory.

4. General test report from OEM regarding specification of earthing.

[Make and model approved by EIC Strictly subject to item specification only] [OEM has to

submit all detail & sample for approved before supplying]

[Water must be poured in bore before starting earthing. Earthing value must be measured

with earth tester. Agency has to bring the earth resistance to at least 02 ohms & voltage

between neutral & Earthing upto 02 volt. Agency has to maintain earthing & its value for one

year. Earthing must be done in the presence of A.E. (GSPHCL)]

Item Estimated Rate [Rs. Ps.] Amount

Description of Item Quantity Unit

No. In Words InFigure Rs.

57 For above earthing additional charges for boring in hard rock soil (by breaker) & filling soft 2.00 Each 276.00 Rs. Two

soil in earth pit (certificate for soil have to given by DEE / AE along with photographs) Hundred Seventy

58A Providing and erecting following type of Modular Type Accessories mounted with 20 G 1.00 Each 139.00 Rs. One

company fabricated metalic box, single mounting base frame covered with textured / metallic Hundred Thirty

front plate, modules erected with necessary connection. As desired by Engineer in charge. Nine Only

TV Co-axial Socket outlet. Cat.-II.

58B Blank Plate Single, Cat.-II 10.00 Each 16.00 Rs. Sixteen Only

58C Providing and erecting modular type accessories mounted on 20G G.I. company fabricated 1.00 Each 502.00 Rs. Five

galvanised metal box covered with approriate front plate modules erected flushed with Hundred Two

wall/Ceiling with 1 Nos. of 16 Amp SP indicator Switch & 3 Nos. of 6 Amp 3/5 pin plug. Only

Cat-II. [For TV Switch board]

59 Supplying and Erecting LED indoor fitting of approximately 4 feet long with LED of 10.00 Each 370.00 Rs. Three

wattage 0.2W to 0.5W assemble on single MCPCB with housing use as a heat sink shall be Hundred Seventy

made from Aluminum extrusion having enough strength (sample must be approved by EIC) Only

with polycarbonate diffuser with following specification:

(A) Company mark/name on the fitting.

(B) Rated input voltage and frequency: 220V to 240 VAC ; 50Hz.

(C) Rated input wattage: max. 24w

(D) Rated input current : 0.2 Amp

(E) Power Factor : Min.

(F) ATHD : Max. 15%

(G) Rated Luminous flux: Min. 2420 lm

(H) CCT: 6500K

(I) CRI: Min. 80Ra

(J) Driver Efficiency: Min. 80%

(K) LED life span: Min. 50000 Hrs @ L70

(L) Over Voltage protection: Withstand up to 440V/AC for 4 Hrs.

(M) Surge protection : Min. 2KV

(N) IP rating: IP

(O) IK rating : IK

(P) Short circuit , Open circuit & Reverse Polarity Protection must be provided

(Q) Fixing clamp design & strength should be sufficient to hold the fitting erected on wall or

(R) 3 core copper wire of appropriate size with earthing connector

(Note:-The manufacturer/ authorized Channel partner of the manufacturer has to submit

yrs free replacement Guarantee for complete Fixture) [Approval will be given strictly subject

to item specification]

60 Supplying and erecting 8 W LED lamps with following wattage capacity of 220 to 240 5.00 Each 111.00 Rs. One

voltage, minimum 15000 burning hours life, 500 V in built-surge protection,Polycarbonate Hundred Eleven

diffuser, mounting suitable for E14 / E27 / B22 lamp holders, pf >= 0.5 (A) LED Lamps Only

integral type, with PC diffuser suitable Lamp holder.

61 Providing and erecting Polycarbonate body surface mounting LED Bulk head type 9 watt 2.00 Each 780.00 Rs. Seven

Lighting Fitting with electronic driver having THD < 15%, CRI>80, P.F.0.95 And lumen output Hundred Eighty

from luminaire 720 lm, input voltage range 160-270 V AC, 50 Hz cool white (3000 to 6500 k), Only

inbuilt driver having efficiency >=80lm/w, -20 deg C to + 60 deg C working temperature, AL

frame with Beam Angle 120 deg.

Item Estimated Rate [Rs. Ps.] Amount

Description of Item Quantity Unit

No. In Words InFigure Rs.

62 Providing, erecting, testing Ceiling Fan confirming to IS: 374/1979 AMDT No. 1 to 6 Class-I, 5.00 Each 1929.00 Rs. One

50 Hz. Specification of Ceiling Fan must be as per below. (1) Sweep: 1200 mm, (2) Thousand Nine

Operating Voltage: 180 to 230 V, (3) Power Factor: > 0.9, (4) Power Consumption: maximum Hundred Twenty

53W, (5) RPM: minimum 330, (6) Service value:min 4.3 m3/min. (7) Class of insulation: 'B', Nine Only

(8) No. of heavy duty premium quality Ball bearing: Two, (9) Total Body: Top & Bottom should

be alluminium, (10) Blade: Aluminium approx 1.1 mm thick, (11) Colour: White high grade

powder coating, (12) Canopy: Two Nos. Heavy duty, (13) Condenser: min 1.5 MFD (15%

Tolerance )as per is 1709-1984, Aluminium body premium quality, Branded make,(14) Down

road: up to 1.0 mtr as per site requirment, (15) Required fixing accessories, (16) 3 core

0.75 sq.mm ISI wire as per site requirment, (17) No vibration and noise due to mechanical

parts. (Agency has to erect safey wire with ceiling fan and checked with EIC) (OEM has to

approved model as per tender specification and tested at ERDA) (Necessary test reports

should be submitted strictly at the time of approval. Sample approved by EIC subject to

above specification only)

63 Providing & erecting Fan clamp of 30x5 mm flat of required length & 10 mm M.S. Bolt & 5.00 Each 98.00 Rs. Ninety Eight

Nuts erected with necessary hook of 10 mm M.S. Round Bar. Only

64 Supplying & erecting 19/20 mm. nominal bore "B" class G.I. pipe / M.S. pipe down rod 10.00 Rn. Mtr. 107.00 Rs. One

erected duly painted for fan complete with necessary 24/0.2 flat 3 core flexible Core with Hundred Seven

earthing. [The down rod thikness, hole, locking arrangement, construction, poweder coating, Only

colour shed should be same as original down rod brought with ceiling fan. For that agency

has to give original down rod sample to fabricator and one sample down rod should be

approved with EIC. After approval given by EIC, agency can use the down rod as per

approved sample. If without approval down rod will be erected on site, agency has to replace

them with own cost.]

65 Providing ad erecting approved make single phase Double Door metal clad D.B. as per 1.00 Each 5536.00 Rs. Five

relevant indian standards ammended upto date. Thousand Five

Supplying and fixing following way single phase MCB distrubution board of company Hundred Thirty

fabricated with sheet box with powder coated inside and outside after apply seven tank Six Only

chemical process of CRCA sheet cover complete with suitable integral single piece

construction tinned copper busbar and link with all necessary interconnection and with

necessary size MS frame for mounting MCBDB. Manufacturer must be provided (1) IP

and as per IS:8623-1 & 3, IEC 61439-1 & 3 having D type PU gasket. (2) Seven tank Powder

coating Certificate (3) Tinned Copper/Brass make neutral & Earthing link with isolation &

Protecting Cover for 240 Volts on surface / recess complete with loose wire box, terminal

connectors for all incoming and outgoing circuits, with suitable size FRLS PVC insulated

copper conductor up to terminal blocks and internal connection, tinned coppper bus bar,

no. tinned copper neutral link, tinned copper earth bar, din bar, detachable gland plate,

interconnections, powder painted including earthing etc.Also MCBDB door,back side body

mast be made of 1.2mm thick CRCA sheet.

Single phase incoming and horizontal single phase outgoing.

Item Estimated Rate [Rs. Ps.] Amount

Description of Item Quantity Unit

No. In Words InFigure Rs.

For 16 Way MCBDB: Including MCB DP 40 Amp. 30 mA double pole ELCB (ELCB

confirming to IS:12640/1988 having sensitivity of 30 mA and breaking capacity of

KA), MCB 40 Amp. double pole switch (C curve) and S.P. MCB of rating 6 to 32 Amp.

with NL suitable to operate on 230 Volt A.C. power. (6 Amp:- 4 Nos., 16 Amp:- 4 Nos. &

25 Amp: 4 Nos.)

(The DBs should be used of same company of MCB / ELCB to be used) (MCBDB must be

erected in line & level with spirit level and finish the external edge with box cutting plaster)

(Same colour MCB(SP/DP) should be used as same as MCBDB) [Including Necessary

numbering / marking on box done with red colour radium sticker as per site requirement and

instructions given by EIC on site. Font / number size given by EIC on site as per requirement]

66 Providing & erecting 240 V MCB Double pole switch for Motor & Inductive load (C curve) 2.00 Each 502.00 Rs. Five

having 10 KA breaking capacity & confirms to IS:8828 with same company metal box with Hundred Two

earthing terminal having following capacity with necessary numbering/marking with oil Paint Only

by painter. For 40 Amp. .

67 Providing and erecting busbar chamber confirming to IS-375 fabricated from 16 GMS sheet 0.50 Rn.Mtr 4378.00 Rs. Four

dust & vermin proof having hinged door with rubber gasket and necessary busbar supports Thousand Three

with copper busbar having current density not more than 1.6 amp/sqmm (Rated current per Hundred Seventy

Cross Section area) duly wired with colour insulating tape for phase sequence, three phase Eight Only

& neutral Each equal & one meter long suitable for following current capacity with necessary

painting mounted on wall or pedestal frame of required size with necessary incoming and

outgoing connections with proper size of copper strip/wire with lugs as directed. Suitable for

100 Amp. capacity having cross section area not less than 250 sq.mm. [make and model

approved by EIC strictly as per tender specification]

68 Supplying & erecting 12 mm thick backelite sheet of approved make and grade on existing 0.50 Sq. Mtr. 2289.00 Rs. Two

25 x 25 x 3 mm red oxide painted angle iron frame suitable for fixing ICDP SWITCH and Thousand Two

energy meter (contractor shall make approved drawing of Bakelite sheet To arrange required Hundred Eighty

No. of Energy meter & ICDP/MCB switch-busbar etc. as per Actual space available in Nine Only

electrical room at site)

69 Providing, erecting, Fabricating the M.S. structure as per requirement of site as per 10.00 Kg. 75.12 Rs. Seventy Five

structure design Including proper size approved by EIC of M.S. angles, flats, bars, square & Paise Twelve

pipe, channels, sections (Tata, Jindal, Asian, JSI Make) complete with cutting, welding, Only

grinding and finishing duly painted with Asian/Nerolac make premium quality oil paint and

true care red oxide metal primer,asian paint make with erection on site as per direction of

engineer in charge with necessary grouting cementing, plastering and finishing complete. All

hole opening of square pipe end must be closed with M.S plate welding. Payment will be

done on KG as per Actual weight.

70 Providing and erecting Mains with ISI marked, 1.1 KV grade electrolyte multi stranded, 40.00 Mtr. 91.00 Rs. Ninety One

annealed copper conductor with heat resistant PVC insulated conforms to IS:694, IEC - Only

227 erected in existing pipe of following size (Specifically for control panel, relays, power

switchgears, motor starters & control wiring) with required size of copper lugs, nuts and bolts

if required. For One wire 10.00 sq. mm

Item Estimated Rate [Rs. Ps.] Amount

Description of Item Quantity Unit

No. In Words InFigure Rs.

71 Providing & erecting bracket consisting of ISI mark "B" class G.I. Pipe 4.2 cm outside 4.00 Each 487.00 Rs. Four

diameter complete with suitable G.I. Sleeve tubing of 2 mm. thick and required size and Hundred Eighty

length suitable for 76.5 / 80 mm. required size of pole top or pipe in pipe surface for terrace Seven Only

as per instruction of EIC or wall bracket as per instruction of EIC having nuts and bolts for

fixing the brackets and having spread of Upto 0.50 mtr. length with suitable rise as per site

condition and suitable welded stiffner reducer and nipple with check nut complete painted

with one coat of yellow zinc and two coats of alluminium paint for Single arm bracket suitable

for pole or terrace as per design given by EIC (a) For single arm bracket. (Jindal / Asian /

Tata / Surya Prakash make Only) (Fabricators:- Bajaj, Valmont, Transrail, Ambica, RR

Ispat Only) (Test certificate to be submitted)

72 Supplying & erecting approved make SMC press moulded composite FRP. loop-in, loop- 4.00 Each 1001.00 Rs. One

out approx. 2mm thick box complete with Bakelite connector strip 5way(3P+N+E) & Thousand One

SPMCB,DIN rail for mounting mob & hinged doors as per requirement having locking Only

arrangements with mounting clamp with nuts, bolts & washers suitable for erection on pole

with cable clamps& earth bolt of following size of box.(A) 300mm x 200mm x 100mm [deep]

73 Providing and Fixing SITC of Outdoor aesthetically designed LED Street Light Luminaire 4.00 Each 3512.00 Rs. Three

with total consumption of Max. 45 W with single piece die cast aluminium housing, high Thousand Five

power LED shall be mounted on high quality metal core PCB with extremely precison Hundred Twelve

designed heat sink complete with IP66 protection Class with polycarbonate / thoughened Only

glass cover the fixture should be suitable for pole/bracket mounting. The fixture to comply

both LM79 and LM 80 guidelines with LED module min. 130 lumen/watt with toughen Glass

L70 at 50,000 hrs, provided with high quality polycarbonate lenses for better light distribution.

The watt capacity of must be Each LED >=4 Watt in street light fitting.The Fixture Should be

able to be Pole Mounted and also bracket mounted, provided with high quality driver for

protection against high and low Voltage cut Off, opertional for high amibient and high humid

envirnoments, THD of driver should be less than 10% and P.F > 0.95. Also the Fixture

should meet the following technical criterias Oprating range Voltage 160 to 270 V, system

efficiency >= 110 lm/w, and total lumens not less then 4950, CCT > 5000K, CRI > 65, beam

angle 120 deg, surge immunity level at least 4 KV integral and 10 KV non integral

The Separate Potted driver should have over current, over voltage protection, short circuit

protection so that the fixture recovers once the fault is removed. In addition to the above

product should be operational in the temperature range of 0 deg to 50 deg and humidity

range of 10% to 90% RH. (Note:- The manufacturer / authorized Channel partner of the

manufacturer has to submit 5 yrs free replcement Guarantee for complete Fixture)

74 Providing & erecting Flexible PVC insulated multistrand multicore 1.1 kv grade ISI marked 15.00 Mtr. 46.00 Rs. Forty Six

copper wires of following size to be erected as directed. 3 core x 1.5 sq.mm. PVC insulated Only

round copper wire ISI mark.

75 Providing & erecting XLPE (IS : 7098) (I)-88 ISI marked armoured Copper cable for 1100 90.00 Mtr. 269.00 Rs. Two

volt to be laid 90 cms. Under ground or to be laid 90 cms. Under ground or to be laid on wall Hundred Sixty

with suitable G.I. heavy guage 1.0 mm thick cable clamp or in existing DWC pipe Nine Only

underground or road crossing or floor of following size of cables.For 4 core x 2.5 sq.mm.

Item Estimated Rate [Rs. Ps.] Amount

Description of Item Quantity Unit

No. In Words InFigure Rs.

76 Providing & laying HDPE Double walled corrugated pipes (DWC) (conforming to IS: 16205 30.00 Mtr. 117.00 Rs. One

(part 24) 2018)) with minimum load required of 450N capacity with anti rodent and ultra violet Hundred

material properties with necessary connecting accessories of same material at required Seventeen Only

depth to be laid 90 cms. under ground for laying of cable below ground / road surface for

enclosing cable and back filling the same to make ground as per original. (A) For Outer dia.

50 mm and Inner dia. 38 mm. ) (Test Certificate to be Submitted)

77 Providing & fixing double compressed heavy duty flange type brass cable gland with rubber 10.00 Each 43.00 Rs. Forty Three

ring for P V C insulated armoured cable complete with outgoing tails, insulating tape etc. For Only

following size cables. For 2 to 4 core x 2.5/4.0 Sq. mm (Sigma, MCI, Comet Make Only)

78 Providing & fixing Solderless crimping type Copper lugs conforming to IS suitable for cable 50.00 Each 8.00 Rs. Eight Only

of following size evenly crimped with high pressure tool & connected to switchgear terminals

with brass/cadmium plated nut bolts in an approved manner. [a] 1.5/2.5 to 6 Sq.mm

Total Sch B-2 electric cost Rs.

Total Tender Amount(Civil + Elect.work ) i.e. B1

Dy. Executive Engineer Executive Engineer

G.S.Police Housing Corp.Ltd. G.S.Police Housing Corp.Ltd.

Mehsana Mehsana