Repair/replacement to sanitary/bath fittings, plumbing, flooring plastering, joinery, false ceiling and wall panneling etc at military hospital, old MH, UK Sub Area Pro Unit under AGE B/R-I of GE Dehradun.

Amount

S&F powder coated aluminium anodised door with frame and shutter, and glazing 5.0 mm thick plain glass and 12 mm thick prelaminated particle board exerior grade in bottom panel, rubber gasket, aluminium glazing clips, mortice lock, aluminium stopper cleat, iron mongary including taking down old door complete all as specified and directed. section of aluminium door shall be of following sizes: - Top;- 85x44.5x1.20 mm thick fixed with rawal plug width;- 85x44.5x1.20 mm thick Bottom;- 100x44.5x1.20 mm thick Style;- 85x44.5x1.20 mm thick Glazing beading;- 0.70 mm thick Aluminium handle 'D' type ;- 150mm Aluminium tower bold 9.9 mm dia shoot 200 mm long Mortice lock stainless steel - 100 mm 4 lever Aluminium stopper cleat aluminium hinges 100 mm long Note;- (i) Making good of wall surface with matching to existing surface complete all as specified ad directed (ii) PCC shall be measured and paid seperatelly Make: (i) Anodised aluminum section : Jindal / Hindalko / Indalco. (ii) Particle board: Navipan / Puratuff / Kitlam (iii) Glass: Saint gobain / Modi guard / Tata

S&F powder coated aluminium window double shutter with frame and shutter and glazing wire gauge, rubber gasket, aluminium glazing clips, aluminium peg stay, iron mongary etc including taking down old window complete all as specified and directed. aluminium sections shall be given below: - Frame;- 85x44.5x1.20 mm thick fixed with rawal plug Style;- 44.5x44.5x1.20 mm thick Glazing beading;- 0.70 mm thick Aluminium handle 'D' type ;- 100mm Aluminium tower bold 9.9 mm dia shoot 150 mm long Glass;- 5 mm thick frosted/ plain glass ( as directed) wire mesh Stainless steel of 0.063 mm nominal dia wire and average width of arperture 1.40 mm Aluminium stopper cleat aluminium hinges 100 mm long powder coated Make: (i) Anodised aluminum section : Jindal / Hindalko / Indalco. (ii) Particle board: Navipan / Puratuff / Kitlam (iii) Glass: Saint gobain / Modi guard / Tata

Taking down Chowkats with shutter of any description exceeding 1.5 Sqm but not exceeding 4 Sqm each (Without taking off shutters from the frame) complete all as specified.

Taking down shutter of any description, exc. 1 Sqm but n. exe 2 sqm each complete all as specified.

S & F 35 mm thick second class hardwood glazed and Skelton factory made door shutters, open rebated and prepared to receive glass/gauze etc divided into squares with plain, chamfered or rounded mitered and rebated sash bars, edges of framing plain, chamfered, fitting with cut and rebated beads for securing glass/ gauge complete all as specified in SSR Pt I-2009 section 8 clause 8.24 (a) and as directed.

S&F 30 mm thick moulded WPC factory made 100% solid door (conforming as per IS-4020) made from 100% lead free single extruded with 2, 4 or 6 raised panel design on the front side with 10 mm deep mould on single side with wood grain texture and back side palin with density not less than 600 Kg/cum. Manufactured by an ISO : 9001-2015 certified company. The door should be water proof, termite proof, fire etardant and having screw holding capacity complete all as specified.

S&F factory made 100% solid wood plastic composite (WPC) door frame of size 75 mm x 50 mm x 50 mm made from wood plastic composite (single extruded process) material with density 780 Kg/Cum from ISO certified company door should be water proof termite proof fire retardant and having good screw holding capacity all as specification and drawing complete all as specified and directed by Engr-in-Charge.

M&L for 30 mm thick, factory made flush shutters,BWR solid core construction, with block board core and plywood face, pannels, commercial type on both sides including provision of suitable blocks for taking mortice locks, latches or other fittings complete all as specified and directed.

S&F in repairs 18 mm thick solid laminated PVC board for cupboard shutters including suitable PVC frame as per specification and drawing complete all as specified and directed.

S&F in repairs 6 mm thick solid laminated PVC board for cupboard sides /shelvest complete all as specified and directed.

Taking down and re-fixing the existing shutter in same opening after & including necessary easing/repair etc. of size exc. 1 Sqm but n. exc. 2 Sqm each complete all as specified.

S&F mild steel framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work con- forming to Fe.290.Gde-E-165 including necessary welding, drilling hole & including dismantling old section complete.

M&L MS rolled sections as in framing or cladding, glazing, door chowkat and the like fixed with angle cleats and connecting plates, etc and either hooks and hinges or steel hanging door confirming to Fe-290 (Gde -E165) complete all as specified.

S&F 100 mm size stainless steel butt hinges 204 grade, and fixed with stainless steel screws, complete all as specified and directed by Engr-in-Charge.

S&F 200 mm long, solid in one piece stainless steel 204 grade, barrel tower bolts of extruded section 10mm dia shoot complete all as specified and directed by Engr-in-charge.

S&F 150 mm long, solid in one piece stainless steel 204 grade, barrel tower bolts of extruded section complete all as specified and directed.

S&F 100 mm size solid in one piece stainless steel handles, all in 304 grade and fixed in stainless steel screws all as directed complete all as specified and directed by Engr-in-Charge.

S&F magnet catcher for cub board with brass body and striking plate including letting in and fixed complete all as specified and directed.

S&F stainless steel sliding door bolts 204 grade, with bright bolt not less than 16mm dia with and incl a minimum of 6 bolts and nuts,and fixed 250mm long complete all as specified and directed.

S&F floor door stopper of alluminium alloy body and tongue anodised, with hard drawn steel spring, fixed in floor, overall length of cover plate 140mm. complete all as specified and directed.

S & F in repair 300 mm mild steel, ordinary rat tail rod pattern spring welded to steel/fixed to wooden door frame including roller and roller plate complete all as specified.

M&L for preparation of new untreated wooden surfaces of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

Taking down Aluminium window shutter size n.exc 1 Sqm including opening up of the corner junctions and replacement of defective members (matching with existing material) alongwith necessary cleats, butt hinges and refixing in the same opening to make the window functional complete all a specified and directed. (Note :- Butt hinges and anodised aluminium section deemed to be included in the quoted rate for item)

Taking down Aluminium door shutter size exc 1 Sqm but n.exc 2 Sqm including opening up of the corner junctions and replacement of defective members (matching with existing material) alongwith necessary cleats, pivots, locks and refixing in the same opening to make the door functional complete all as specified and directed. (Note : - Butt hinge ,Pivot, locks and anodised aluminium section deemed to be included in the quoted rate for item)

Taking down Aluminium door shutter size exc 2 Sqm but n. exc 4 sqm including opening up of the corner junctions and replacement of defective members (matching with existing material) alongwith necessary cleats, pivots and refixing in the same opening to make the door functional complete all as specified and directed. (Note : - Butt hinge, Pivot, Floor spring and anodised aluminium section deemed to be included in the quoted rate for item)

Hacking out old broken glass (any thickness), size quality or description from wooden frames glazed with putty or fixed with beads .complete all as specified and directed

S&F 12mm thick toughened glass in any size or shape for in door, window etc.complet all as specified and directed by Engr-in-charge

S&F in repairs 600mm size solid in one piece stainless steel handles, all in 304 grade and fixed in glass doors as directed complete all as specified and directed by Engr-in-Charge.

S & F in repairs pivot hinges for glass door/window complete all as specified and as directed.

S&F 3.0 mm thick sheet glass, ordinary quality and glazing with oil putty in square n.exc 0.50sqm each pane.complete all as specified and directed

S&F 3.0 mm thick transparent acrylic sheet, fixed with silicon sealent in square/rectangular in doors, windows etc complete all as specified and directed

S&F glazing (5.00 mm thick plain /frosted glass) in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket and aluminium snap beading etc. complete all as direted by engineer-in-charge . (Note : - Cost of aluminium snap beading and EPDM rubber/ neoprene gasket if required shall be paid and measured seperately)

Supply only anodised aluminium snap beading as per sample.

Supply only EPDM rubber/ neoprene gasket as per sample.

S & F in repair powder coated aluminium grill of size 75x75x4-5 mm thick size fixed with aluminium frame including taking down old grill complete all as specified and directed.

S&F in repair Double action floor spring of approved brand and manufacture conforming to IS: 6315 hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and making good to floor to match with existing floor complete all as specified and directed by engr-in charge.

M&L Framed work as in door or gate angle or other section prepared for handing and sliding with and including hooks and hinges and steel gate doors fittings Fe-410-W. E-250 quality 'B' .including dismantling complete all as specified and directed

Dismaltling of AC sheeting any type (corrugated/semicorrugated, etc) in roof covering etc complete all as spfd and as directed.

S&F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws including complete all as specified and as directed.

S&F 150mm size solid in one piece stainless steel handles, all in 304 grade and fixed in stainless steel screwsall as directed complete all as specified and directed by Engr-in-Charge.

S&F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding/ridge to wall, fixed with self tapping screws as specified and directed.

Dismantling of timber scantlings 40 Sqcm and over in section of any description and in any situation. (unframed work) complete all as specified.

S & F mild steel work as in main and cross beam, hip and jack rafters, purlins etc. fixed with angle cleat or other connecting plate complete confirming to Fe – 410-O or Fe – 310-O complete all as specified and as directed.

M&L for preparation of new untreated steel surfaces of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer. complete all as specified and directed

S&F in repair of steel window with side hung shutters including box type hinges with steel handle and steel peg stay, complete without glazing bars, dovetailed or welded complete all as specified and directed.

S&F in repair of steel window with side hung shutters including box type hinges with steel handle and steel peg stay, complete with glazing bars, dovetailed or welded complete all as specified and directed.

S&F in repair of steel windows or ventilators, fixed type, with glazing bars complete all as specified and directed.

S&F welding in repairs length exc 2.5 cm but n. exc 5 cm & metal to be welded n.exc 6 mm thick complete all as specified.

S&F in repairs powder coated aluminium anodised partition with frame, (fixed type) shutter, and glazing 4.8 mm thick plain glass, and 12mm thick prelaminated particle board interior grade in bottom panell, glass fixed with rubber gasket with aluminium glazing clips & snap beading of following sizes;- Frame of vertical/horizontal section;- 44.5x44.5x1.22 mm thick Bottuom section;-100x44.5x1.22 mm thick Complete all as specified and directed by the Engr in charge Make: (i) Anodised aluminum section : Jindal / Hindalko / Indalco. (ii) Particle board: Navipan / Puratuff / Kitlam (iii) Glass: Saint gobain / Modi guard / Tata

S&F in repair aluminium (extruded section) Door closer hydraulically regulated, designation No.1 universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 Kg and fixed with stainless steel screw complete all as specified and directed.

S&F in repair Continious (PIANO) hinges, mild steel, bright finish or electrogalvanised. 30 mm width of flaps (when open) complete all as specified as directed.

S & F repair Hasp and staple 100mm safety type, stainless steel 304 grade with hinge pin including bolt to hinge plate and fixed with screws complete all as specified.

S&F in repair 25 mm dia 1mm wall thickness stainless steel 202 Gde drapery rod with incl brackets, decorative finials at both ends complete all as specified as per sample.

Supply, fixing, laying & testing 15 mm dia (Nominal bore) galvanised iron water tubing 'medium grade' with and including all GI fittings such as unions, reducer sockets, socket reducing bends, elbows, tee, checknuts, caps, plugs etc. fixed complete to walls and ceilings or laid in floors incl taking up or down old tubing complete all as specified and directed.

Supply, fixing, laying & testing 20 mm dia (Nominal bore) galvanised iron water tubing 'medium grade' with and including all GI fittings such as unions, reducer sockets, socket reducing bends, elbows, tee, checknuts, caps, plugs etc. fixed complete to walls and ceilings or laid in floors incl taking up or down old tubing complete all as specified and directed.

M&L 25 mm thick PCC 1:2:4 type B-1 (using 20mm graded stone agg) for sub base to receive the screed including demolition of old concrete complete all as specified and directed.

M & L PCC 1:2:4 type B-1 using 20 mm graded stone aggregate as in benching to drain, holdfast, padding to roof/chhajja, coping, bed block etc. and the like edge slightly rounded or chamfered including necessary use and waste of form work and demolition of existing old cement concrete (un-reinforced) complete all as specified.

M&L for PCC (1:3:6) type C-2 (using 40mm graded stone aggreate), 75 mm thick as in plinth protection, finishing the surface even & fair without using extra cement the plinth protection shall be laid in alternate bays n exe 2 Sqm, 10mm joints shall be provided, joints shall be filled with bitumen mastic, bitumen mastic comprise of 1 Part of Hot bitumen 85/25 grade and 3 parts of sand all by weight including demolition of existing plinth complete all as specified & directed.

M & L PCC 1:4:8 type D-2 using 40mm graded stone aggregate as in foundation filling, mass concrete, sub base or leveling course of floor etc. including demolition of existing old cement concrete (un-reinforced) complete all as specified and directed.

M&L Glazed ceramic tiles coloured of size 450x 300 x 6 to 7mm thick on vertical surfaces such as skirting, dados etc set and jointed in neat cement slurry and pointed in white cement to match over and including 10 mm thick rendering in CM 1:4 for receiving tiles as in backing and including dismantling of old tiles complete all as specified and directed.

M&L for red brick tiles (clay tiles) of 10-12 mm thick size 15 x 5 to 7.5 cm as in vertical surfaces such as wall dado's etc over 15 mm thock rendering CM (1:4) set and jointed in neat cement slurry and pointed in coloured cement to match the surfaces of tile complete all as specified and directed. The work will be carried upto tripple storey building the rate of scaffolding included for this item also and including dismantling of old tiles complete and removing debries outside the premises as directed by Engr in charge

M&L non skid ceramic coloured tiles (300x 300mm) x 7 to 8mm thick as in floor set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface of tile over and including screed bed or bedding layers of mortar 15 mm thick for laying floor finishes in CM 1:6 and including dismantling of old tiles complete all as specified and directed

M&L non-skid / mat finish designed coloured joint free ceramic tiles of size not less than 400 mm x 400 mm x 6-7 mm thick in floor, set and jointed in neat cement slurry and pointed in coloured cement to match over and including 15 mm thick screed in cement mortar 1:6 and including dismantling of old tiles complete all as specified and directed.

M & L for Vitrified Ceramic tiles light shade polished (square / rectangular) of 10mm thick, area of each tile n.exc exceeding 0.36 sqm as in floor etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface of tile over and including screed bed or bedding layers of mortar 15 mm thick for laying floor finishes in CM 1:6 and including dismantling of old tiles complete all as specified and directed.

Demolition of stone slabs and tiles of any description or thickness in floors, aprons etc complete all as specified and as directed by the Engr-in-Charge.

M&L Sand filling under floors or in foundations including watering and consolidation complete all as specified and as directed.

M&L for 60 mm thick pre polished rubber moulded coloured machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658- 2006 M-35 Grade with grey cement and no pigment including demolition of old tiles complete all as specified and as directed by the Engr-in-Charge.

M & L for 20 - 25 mm thick machine cut Kota stone slab as in flooring over and including 15 mm thick screed bed in CM 1:6, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including necessary grinding, rubbing, rounding to exposed edges and polishing in granite finish complete all as specified and directed.

M & L for 20 - 25 mm thick machine cut Kota stone slab as in risers of steps, skirting, dado and pillar over and including 10 mm thick rendering in CM 1:4 , laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including necessary grinding, rubbing, rounding to exposed edges and polishing in granite finish complete all as specified and directed.

M&L 20 mm thick granite ( of any type) (table rubbed and polished ) in steps, jambs,pillars, window-cills, cooking plateform, and like in ceme t mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed.

Demolition of brick work or stone/boulder masonary built in cement mortar incl all quoins arches pillars etc.complete all as specified and directed.

M&L brick work with sub class ‘B’ bricks old size straight or curved on plan exc. 6 mtr mean radius built in CM(1:6) complete all as specified and directed.

M&L brick work with sub class ’B’ bricks old size straight or curved on plan to any radius in half brick thick walls built in cement mortar (1:4) complete all as specified and directed.

Taking down cement or cement lime plaster of any description from brick or stone wall , ceiling etc. including raking out of joints, hacking for key, scrubbing down with water etc.complete all as specified and directed.

Removing /cutting trees vegetation, digging out roots filling holes on building wall/roof/cajja etc at any position and make in good with cement mortar 1:2:4 type B-0 complete all as specified and directed.

M & L rendering 15mm thick in patches n exc 3 Sqm in cement mortar 1:4 mixed with water proofing compound of cement finished fair faces of brick/concrete surfaces of wall, even and fair without using extra cement including taking down coplete WPC will be measured and paid separately.

M&L rendering 15 mm thick cement plaster in CM 1:6 on fair faces of brick & concrete surfaces and finished even and smooth (without using extra cement) complete all as specified and directed.

M & L rendering 15mm thick in cement mortar 1:4 mixed with water proofing compound, other than fair faces of brick/concrete surfaces finished even and fair without using extra cement . WPC will be measured and paid separately complete all as specified and directed.

M&L 10 mm thick ceiling plaster in CM (1:4) on fair faces of concrete surfaces finished even and smooth without using extra cement complete all as specified and directed.

Supply only liquid water proofing compound and add in cement as per manufacturer instructions. complete all as specified and directed.

M&L, preparation of new plastered/un plastered surfaces and applying two coats of cement base paint in walls etc complete all as specified and directed.

M&L for two coats of white wash on newly plastered surfaces of ceiling including preparation of surfaces complete all as specified and directed.

M&L for preparation of wall and applying wall care putty 1 to 1.5 mm thick to make the surface smooth as specified and directed by Engr-in-Charge. Make : Berger/Asian/JK/Birla

M&L for preparation of old surface and applying one coat of floor paint on old surface of floors complete all as specified and directed by Engr-in-Charge. Make-Asian/Berger/ Shalimar

M&L one coat of white wash on ceiling including preparation of existing old surfaces of ceiling complete all as specified and directed by Egnr-in-Charge.

M&L one coat of white wash on old walls including preparation of existing surfaces of walls complete all as specified and directed by Egnr-in-Charge.

M&L one coat of oil bound distemper in any tint on walls including preparation of old decorated surfaces of walls (plastered) by brooming down with core wire brushing, scraping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots and finally clean with sand paper all as directed by Engr-in-Charge.

M&L one coat of cement base paint on external wall surfaces including preparation of old decorated surfaces of walls (plastered) by brooming down with core wire brushing, scraping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots and finally clean with sand paper all as directed by Engr-in-Charge.

M&L two coat oil bound distemper in any tint over a coat of primer on walls complete all as specified in SSR Part I including complete removal of existing treatment from wall upto plaster surface by electric sand paper grinder, washing, rubbing down and stopping of existing treatment including cleaning of mortar drops, smoke soot, moulds, moss, efflorescent salts, trading oil, greasy spots etc and preparation of plastered surfaces finally rubbed and smooth with sand paper all as directed by Engr-in-charge.

M&L two coat of cement base paint on external wall surfaces including complete removal of existing treatment from wall upto plaster surface by electric sand paper grinder, washing, rubbing down and stopping of existing treatment including cleaning of mortar drops, smoke soot, moulds, moss, efflorescent salts, trading oil, greasy spots etc and preparation of plastered surfaces finally rubbed and smooth with sand paper all as directed by Engr-in-charge.

Material & Labour for Preparation with complete removal & applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt sistance interior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm on surfaces.all as directed by Engr-in-charge. Make : Berger/Asian/Shalimar

M&L two coat weather coat exerior emulsion paint any tint over a coat of primer including complete removal of existing treatment from wall upto plaster surface by electric sand paper grinder, washing, rubbing down and stopping of existing treatment including cleaning of mortar drops, smoke soot, moulds, moss, efflorescent salts, trading oil, greasy spots etc and preparation of plastered surfaces finally rubbed and smooth with sand paper all as directed by Engr-in-charge. Make-Asian/Berger/ Shalimar

M&L two coat of damp proof paint any tint on wall over a coat of primer including complete removal of existing treatment from wall upto plaster surface by electric sand paper grinder, washing, rubbing down and stopping of existing treatment including cleaning of mortar drops, smoke soot, moulds, moss, efflorescent salts, trading oil, greasy spots etc and preparation of plastered surfaces finally rubbed and smooth with sand paper all as directed by Engr-in-charge. Make : Berger/Asian

M & L preparation of old painted surfaces of wood & wood based material of any description over 10 cm width or girth and applying one coat of Synthetic enamel Paint complete all as speciied.

M & L preparation of old steel surfaces of any description over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as speciied and directed.

S&F in repair galvanised mild steel wire cloth. 0.63mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples including wooden beading complete all as specified and as directed.

Dismantling wall and ceiling boards (fiber, pulp, insulation etc) or insulation boards/slabs/blankets any thickness incl cover fillets. complete all as specified and directed.

S& F 4 mm thick 'E' board (classic) of size 600x600 mm false ceiling including & fixing of frame work made of special section MS sheet glavanised with zine coating , cellular nitro painting & consisting of angle cleats of size 25 mm wide, 1.60 mm thick with flange fixing to the ceiling with dash fastener 12.5 mmx40 mm long or with 4 mm dia GI wire or fixed with nails or bolts in GI channel 45x14x0.90 mm runner at 600 mm c/c including fixing of E boad with ceiling section & perimeter of angle 25x25x0.50 mm thick all a specified, and directed ..

S&F Solid PVC Wall panneling consisting of 5mm thick of wood grains PVC sheet inclusive of solvent and fixing to walls on PVC frame including all fillets as per specifications and drawing complete all as specified and directed.

S&F hollow profile PVC Wall panneling consisting of 5mm thick PVC sheet inclusive of solvent and fixing to walls on PVC frame including all fillets as per specifications and drawing complete all as specified and directed.

M&L for cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc. and cutting chases for concealed water tubing or concealed conduit wiring, etc. and making good, cutting not exceeding 10 cm girth as in brick wall complete all as specified and directed.

S&F Rotational moulded polyethylene(triple layer white) water storage tanks 500 Ltr capacity (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I including dismantling of old water tank and remove from site complete all as specified and directed.

S&F Rotational moulded polyethylene (triple layer white) water storage tanks 1000 Ltr capacity (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I including dismantling of old water tank and remove from site complete all as specified .

Supply and fixing in repair PVC connection 15 mm dia 450 mm long with bras fly nut at both ends complete all as specified.

S&F in repair sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including cantilever brackets of suitable angle iron,CP brass waste coupling ,superior quality PVC waste pipe and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm complete all as specified .

S & F in repair vitreous china squatting pan “ORISSA PATERN” of size 580 mm x 440 mm, white, with integral foot rest (excluding flushing cistern and flush pipe) including single trap spun casted 60 cm long fix in eposy mortar connection to trap and to flushing pipe, anti syphonage pipe etc and making good to floor complete..

S&F in reapair 75 mm cast iron floor trap, spun casted with grating including jointing to waste pipe fixed in cement concrete type B1 (1;2;4) complete all as specified and as directed by the Engr-in-Charge.complete

S & F in repair 10 litre capacity PVC low level cistern ‘ white’ with inlet, float valve including bracket with 32 mm dia PVC pipe 600 mm long complete all as specified.

S&F in repair looking mirror 450x600mm x 5 mm thick mounted on decorative type PVC frame fixed with PVC rawal plug with CP brackets screw fixed, complete all as specified . Make : Parryware/hindware/Jaguar

S&F in repair 550x400mm Wash basin, vitreous China (Flat back) including fixing and pinning in ends of brackets including brass waste coupling of requisite size waste pipe complete all as specified.

S&F in repair pillar taps, brass, with capston heads, fancy type chromium plated, screwed down high pressure with long screwed shanks and flynuts screwed for 15mm bore iron pipe and fixed complete all as specified and directed. Make : Jaguar/Cat part No. KUP-35001PM/Hindware Cat Part No:F370001/Parryware Cat Pat No.T4302A2

S&F in repair brass chromium plated ovehead shower with shower arm complete all as specified and directed. Make : - Parryware Cat Part No T9985A1(Shower) & T-9999A1(Arm)/Hindware Cat Part No F160054 (Shower) & F190016(Arm)/Jaquar Cat Part No OHS 1999 (Shower) & SHA479L300 (Arm).

S & F in repair 15 mm dia bore chromium plated concealed stop cock, complete all as specified. Make :Jaquar/Hindware/Parryware

S&F in repair 15 mm bore Angle cock/stop valves, cast copper alloy, fancy type chromium plated screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed. Make : - JAGUAR Cat Part No FON-40053/Hindware Cat Part No F160017/Parryware

S&F in repair 15mm bore Bib taps long body, cast copper alloy fancy type chromium plated with hand elbow operated handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed. Make : - JAGUAR Cat Part No FLR-CHR5043N-40053/Hindware Cat Part No F280002MD/Parryware /Equivalent Kohler

S&F in repair soap dish, brass, chromium plated, fixed to wall with rawl plugs and chromium plated screws complete all as specified and directed.

S&F in repair sheet glass shelf assembly consisting of 5.5mm thicksheet glassshelf with chromium plated guard and railing complete all as specified.

S&F in repair plate rack size 90 x 75x 20 cm made out of 1.00 mm thick stainless steel grade 304 complete all as specified and as directed.

S & F in repair stainless steel grating 100 mm dia size complete all as specified. Make : Prayag Cat No. FT-77 or equivalent in Hindware/ parryware.

S&F in repairs brass chromium plated towel rail 600 mm long between flanges complete all as specified.

M&L cleaning of water storage tank 500/1000 Ltr capacity mechanically using pressure pump with disinfectant chemical including cleaning & removing all scale & dirt etc from existing tanks, mouths of circulating pipes and outer surface of any description & washing down in the manner complete all as specified and directed.

S&F in repairs 20 mm dia ball brass valve high pressure with polythene float and fly nut complete screwed for iron pipe or brass ferrule and fixed all as specified and directed.

S&F in repair of Vitreous china wash down water closet pan (pedestal pattern) (cascade) , white including flushing cistern, Plastic water closet seat, white, closed pattern with flat bottom, and cover etc complete all as specified and directed by Engineer in Charge.Make : - JAGUAR CAT Part No FLS-WHT-5351/ Hindware CAT Part No 92098 P-21 including trap (P or S type) Parryware Cat Part No VERVE10269

S&F in repair vitreous China wash down (EWC) water closet pan(pedestal pattern), white (excluding flushing cistern and flush pipe) but including seat and cover white for pedestal pattern complete all as specfied and directed.

S&F in repair half stall china urinals (wall type) complete incl plugs, bedding urinal to plugs with and incl 60 mm long screws, pointing around urinal back in cement and waste pipe etc complete all as specified and directed by Engineer in Charge. Make : - Jaquar/URS-WHT-13261 size 355x 310 x 535 mm/Hindware vinenzia Cat Part No 60023 size 31.5 x 34.5 x 66 cm/Parryware Cat Part No Aquaseal and neutral size 360 x 345 x 565

S & F 32 mm dia waste fittings, brass chromium plated for Glazedware sink, WHB, etc with long screwed shanks and flynuts, flange embedded in red lead cement and other end fixed complete all as specified and directed.

S&F in repair bib taps long body, brass, fancy type, chromium plated with crutch or butterfly handles, screwed down, screwed for 15 mm bore complete all as specified and directed. Make : Jaquar CAT part no.ALI-85037/Hindware CAT part no. F-370004

S&F in repair 15mm dia chromium plated brass sink mixer with swivel spout (wall mounted) or mixing hot and cold water, screwed down for 15mm bore GI pipe complete all as specified & directed.Make : Jaquar CAT part no.CQT-CHR23309B/Hindware CAT part no. F280020CP/Parryware CAT part no. G3335A1

S & F in repair 15 mm dia CP brass Wall mixer with provision of over head shower complete with 115 mm long bend pipe, connecting legs & wall flange complete all as specified and directed. Make : Jaquar CAT part no. CON-CHR-281 KN/Hindware CAT part no. F280018 CP/Parryware CAT part no.G4017 A

S & F in repair 15 mm dia CP brass centre hole basin mixer with accessories in wash basin for mixing hot and cold water, screwed down for 15 mm dia bore GI Pipe complete all as specified and directed.Make : Jaquar CAT part no. SOL-6001B/Hindware CAT part no. F450009/Parryware CAT part no. G0665A1

S&F in repair CP brass angle cock 15 mm bore complete all as specified. Make : - Jaquar CAT part no. CON-CHR-053KN/Hindware CAT part no. F200007 CP/Parryware CAT part no. G0253 A1

S&F in repair CP Health Faucet with 1.20 mtr metalic expandable tube & hook complete. Make :Parryware CAT part no. T9941A1/ Hindware CAT part no. F160013/ Jaguar CAT part no,.ALD-573

S&F in repair Jet spray (L-Band) with 1 mtr expandable tube & hook complete. Make : Prayag Cat No.BEA-18 or equivalent in Parryware/ Hindware.

S&F in repair Plastic Water Closet seat,white, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device complete all as specified and directed.Make : Jaquar/Hindware/Parryware

S & F in repair toilet paper holder, chromium plated fixed to wall with chromium plated brass screws and rawl plugs complete all as specified and directed. Make : Jaquar/Hindware/Parryware

S & F in repair Towel rack long of stainless steel grade 304 complete all as specified. Make : Jaquar CAN-CHR-1181S/parryware (T6008A1)/Hindware-F-890012CP

S & F in repair PVC waste pipe flexible type 32 mm dia with coupler complete all as specified and directed .

S & F in repair PVC waste pipe for urinal flexible type with 50 mm dia coupler complete all as specified and directed .

Demolition and breaking up drain pipes of 100/75 mm bore (salt glazed stoneware, AC or reinforced concrete) set in cement mortar complete all as specified and directed.

S & F 75 mm bore UPVC (SWR) pipe 4 kgf/cm2 single socketed in any length with rubber ring, fixed on wall complete all as specified. Make :Supreme/Finolex/Astral Note :- Sample of pipe to be approve by Engr-in-Chage before installation.

S & F 110 mm bore UPVC (SWR) pipe 4 kgf/cm2 single socketed in any length with rubber ring, fixed on wall complete all as specified. Make :Supreme/Finolex/Astral Note :- Sample of pipe to be approve by Engr-in-Chage before installation.

S & F 75 mm bore UPVC (SWR) pipe 4 kgf/cm2 single socketed in any length with rubber ring,joints laid in trenches complete Make : Supreme/Finolex/Astral

S & F 110 mm bore UPVC (SWR) pipe 4 kgf/cm2 single socketed in any length with rubber ring,joints laid in trenches complete Make :Supreme/Finolex/Astral

S & F UPVC (SWR) bend, 75 mm bore' complete all as specified. : Make :Supreme/Finolex/Astral

S & F UPVC (SWR) junction single, (Single T) equal or unequalnd, 75 mm bore with access door complete all as specified. : Make :Supreme/Finolex/Astral

S & F UPVC (SWR) bend, 110 mm bore' complete all as specified. : Make :Supreme/Finolex/Astral

S & F UPVC (SWR) junction single, (Single T) equal or unequalnd, 110 mm bore with access door complete all as specified. : Make :Supreme/Finolex/Astral

S&F in repair Stack clamps made out of 50 mm by 5 mm flat iron and 16 mm dia round iron stays, incl nut and bolts and securing ends of stay to wall or roof for 75/100 mm bore CI / PVC pipe.grouted in PCC 1:2:4 type B-1 complete all as specified.

M&L taking out old treatment from existing RCC roof and cleaning of roof slab including picking, sweeping clean and washing down with water to remove dust & providing water proofing treatment with polymeric standard water proofing membrane, complete all as specified and described as under:- (a) Providing screed bed or bedding layer of mortar 15 mm thick in cement mortar 1:3 over roof surface mixed with & including WPC as per manufacturers instructions. (b) Preparation of surface and applying one coat of polymeric primer @ 0.30 kg / sqm. (c) Supply & providing APP based polymeric water proofing membrane 3 mm thick of weight not less than 3.60 kg / sqm reinforced with polyester non-woven fabric (weight not less than 150 gms/Sqm) centre core including coating the surface with the compatible primer and torch application of membrane with 10 cm overlaps as required thereof, complete all as specified and directed. (d) Applying one coat of bitumen 85/25 @ 1.2 Kg/Sqm over which one coat of aluminium bituminous paint @ 0.20 Kg/Sqm shall be applied. NOTE:- The work of water proofing treatment shall be got executed through expert team of manufacturers or authorised applicator of manufacturer.

M&L in replacement for water proofing treatment on roof slab including picking, sweeping clean and washing down with water to remove dust & providing water proofing treatment described as under:- (a) Surface preparation and treating of construction joints, filling of honey combs with polymer modified mortar (Cement: Sand : smart care multipurpose polymer of Asian Paints or equivalent product of Thermax/ Berger ) (b) Providing PCC (1:2:4) type B-0, 25mm thick screed bed or bedding layer over roof surface . (c) Cleaning the surface and applying (Resin & Hardner) smart care Epoxy Primer 2k of Make Asian paints or equivalent product of Thermax/ Berger ) on the cleaned surface for bonding of PU magnum with the existing concrete surface. (d) Supplying, providing and applying waterproofing treatment to Terrace area with Asian Paints Smart care PU magnum, single component highly elastomeric seamless cold applied modified PU coating or equivalent product of Thermax/ Berger) including all necessary surface preparation, coving using smart care multipurpose polymer, water pond test, etc. complete as per manufacture's specifications and application methodology. The same coating shall be applied in two coats achieving a total thickness of 1mm. The coating shall have dual combination of 250% elongation . Note - (i) Execution to be done with authorised applicator of the manufacturer. (ii) Work will be executed in smart assurance system.

M&L for Cutting around the pipe 75/100mm bore waste pipe/soil pipe including taking out plant roots up to any depth in brick masonary and rejointing in pipe joint in eppoxy mortar (Asian/Berger) and making good to existing surface all as directed by Engr-in-charge. (After the jointing pipe one week to be open for checking of leaking including scaffolding)

S & F in repairs PVC bib tap 15 mm dia complete all as specified.

S & F in repairs PVC pillar tap 15 mm dia complete all as specified.

S&F in repair padestal for Wash basin, vitreous China requisite size coplete all as specified and directed by engr- in charge . Make : Cera/Jaquare/Parryware

M&L for ATT at points of contact of wood work by chemical emulsion (in oil or kerosene based solution) @ 0.5 litre/hole by drilling 6mm dia holes at a downward angle of 45 degree at 150mm centre to centre and sealing the same

Material & Labour for providing and fixing stainlesssteel (Grade 304) railing/ corner gaurd made of hollow tubes,channels, plates, sheets etc., including welding, grinding,buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrangement including dismantling of old u/s S/S items complete all as spfd and directed

S&F in repair mirror cabinet of size 446x505x125 mm, decorative type PVC frame, fixed with PVC rawal plug with CP brackets screw fixed, complete all as specified . Make : nilkamal/ciplaplast or equivalent.

M&L for precast cement concrete type C0 1:3:6 (using 12.5mm graded stone aggregate) louvres and jallies, 25mm thick (mea sured solid), including all mouldings frame etc complete all as specified and as directed.

S&F in repair runners 45 mm Telescopic (KTS-20) for SS wire basket full extension load capacity 50 kgs, Make :Hexa, Shreeji, Hafele

S & F in repair Solar control film 25 micron reflective type sticked to glass panes as per instructions of manufacturers complete all as specified and as directed.

S&F in repair chrome plated stainless steel wire basket (storage basket) pull out type, size 530 x 500 x 100 mm with necessary fixing clips etc. complete in all respect as specified and as directed by engineer- in – charge. Make : Hettich, Hafele, Butterfly

M&L cleaning of Man hole any depth any size taking out accumulated, soil, sludge any material incl both ends and removal to MD lands incl manhole cover removing & refixing all as directed by Engr-in-charge.

Cleaning of sewage pipe line 150 mm to 200 mm dia pipe and by rodding or by bamboo & removing the sludge/waste mtrl and burying the waste material in borrow pits. Note:-(cost of the borrowpit shall be deemed to be included in the quoted rates of this item). Notes. For cleaning of sewage system:- (a) Contractor's representative shall attend office of Engr-in-Charge on all working days at 0900 hrs to collect the complaints pertaining to blockage of traps, cleaning of sewage lines, manholes, septic tank and soak wells . In case contractor's representative fails to report Rs 450/- per day will be deducted from the contractor payment for the absent period. (b) complaint slips shall be deposited to the JE concerned after completion of job duly singed by the users. payment shall be made on the basis of complaint slips and site verification by JE/ Engr-in-Charge. (c) Contractor shall provide printed complaint register/ slip as per format given by Engr-in-Charge before commencement of work. (d) The work in foul conditions such as cleaning of soakwell, septic tanks, manholes etc shall be carried out with mechanical means where work with mechanical means is not practicable and work shall be executed manually with the permission of Engr-in-Charge.

M&L for dewatering and desludging of septic septic tank/sokage well of any size and depth by manually/mechanically (solid contents if not removed by mechanically should be removed by manually) and removing the sludge out side of MOD complete all as directed at site. After complete cleaning of septic tank the manhole cover shall be re-fixed in same position with CM 1:4 and bleaching powder spread on top surface of septic tank @ 1 Kg per septic tank complete all as specified and directed at site.

Pumping out sewage water from the man holes /Septic taank/soakage well at different locations by means of sewage tanker fitted with pump (5000 Ltr capacity) and disposing out off MD land as directed by Engineer-in-charge.

M&L for construction of soakage well, internal dia 2.40M dia & depth 3.00M including excavation in any type of soil complete all as specified and shown on TD drawing & directed.

Taking down carefully copper /aluminium point wiring (light, fan , socket or power) complete, fittings such as switches, ceiling roses, pendants, regulators sockets light fitting etc removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls/floors and reuse the serviceable fittings under respective items complete all as directed.

M&L point wiring with 1.5 Sqmm (Nominal area) FRLS PVC insulated and unsheathed single core cable 1100 Volts grade with stranded copper conductor in and including concealed rigid PVC conduit medium grade including accessories incl cutting chases etc along with continuous earth wire 1.5 Sqmm FRLS PVC insulated, unsheathed stranded copper conductor cable and connected to common earth dolly, with and including 1.6mm thick cadmium plated sunk MS pressed steel terminal boxes with 3.0 mm thick hylum sheet cover fixed with brass screw complete with all accessories for one light point/Fan point controlled by one ,one way switch .

All as per Item No 168 mentioned here-in- before but one three pin 5 Amps socket out let on the same board with other switches complete.

All as per Item No 168 mentioned here-in- before but one three pin 5 Amps switch socket out let on the independent board with other switches complete.

All as per Item No 168 mentioned here-in- before but One bell/buzzer point controlled by bell push complete all as specified .

All as per Item No 168 mentioned here-in- before but one three pin 15 Amps switch socket out let on the independent board with 2.5 sq mm PVC insulated FRLS copper conductor and 1.5 Sqmm FRLS copper conductor for continuous earthing complete all as specified.

S & F in repair Switch piano flush type single pole one way 230 Volts 6 Amp complete all as directed..

S & F Socket outlet 3 pin , 230 Volts 5/6 Amps multipurpose 5 pin complete all as specified.

S & F bell push flush type 5 Amps 230 Volts single pole complete all as specified.

Supply and fixing Socket outlet multipurpose having provision for 3 pin, 230 Volts 15/16 Amp and 3 pin, 5/6 Amp, piano flush type IS: 1239-1988 marked with valid CML No complete all as specified.

Supply and fixing Switch piano flush type, single pole, one way, 230 Volts 15/16 Amps marked with valid CML No. complete all as specified

Supply and fixing Ceiling rose, three terminal ISI marked surface bakelite suitable for batten fitting complete all as specified. Make:- Havells/Anchor/Cona.

S&F anglurar Lamp holder, PVC/polycarbonate type with back plate suitable for batten fittings complete all as specified. Make:- Havells/Anchor/Cona.

S&F in repair round shaped LED downlights of capacity 12 Watt suitable for fixing in false ceiling with all accessories and including connecting up with three core flexible copper conductor cable of suitable size . Make Eveready or equilent in Philips/Wipro

Supply only LED tube rod 18 watt made out of polycarbonate acrylic diffuser lumen out put 1800 lumens incl making necessary alteration/connection in existing fitting for fixing of same complete all as specified & directed. Make-Havells/Philips/Crompton

S&F in repair round shaped LED downlights are made with injection moulded polycarbonate housing with snap fit/screw fit arrangement of polycarbonate/aluminium spun ring for surface mounting of capacity 12 Watt with all accessories and including connecting up with three core flexible copper conductor cable of suitable size . Make Eveready or equilent in Philips/Wipro

S&F in repair LED tube light fitting batten type all in one single phase 20 W with lamp 6500/4000 K complete pre-wired all accessories. Make Eveready or equilent in Philips/ Wipro

Taking down carefully complete fittings such as switches, ceiling roses, pendants, regulators sockets light fitting etc removing materials to store for keeping in safe custody for reuse and refixing the same and making good disturbed surfaces of walls/floors complete all as directed.

Supply and fixing in replacement LED street light fitting 70 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete all as specified.

Dismantiling exiting unserviceable 200 LPD to 500 LPD solar water heating system etc and re-fixing its original position after necessary repair/ replacement of unserviceable spares (Evacuated Tube Collector) all as specified and directed. Note : Replacement of spares shall be measured & paid separately under respective items of Sch 'A'.

M&L for cleaning of solar water heating system dismantled against item No 54 above and Servicing of solar water heater system by Cleaning complete tubes and internally, Anti-scaling Cleaning of all effected parts . Removing any type of chocking of Solar Collector or tube, repairing any type leakage from Gasket, Rubber Washer after Cold Water inlet and before hot water outlet of Solar Water Heater with cleaning agent complete all as specified and directed.

S & F in repair hot water pipe line 20 mm dia (heavy grade) duly insulated with glass wool 50 mm and aluminum cladding complete all as specified and directed.

S & F in replacement heating element of capacity of 3 KW, thread type, suitable for solar water heating system complete all as specified and directed.

S & F in replacement thermostat, suitable for solar water heating system complete all as specified and directed.

S &F in replacement silicon washer of size suitable for solar water heating system complete all as specified and directed.

S & F in repair solar water heating system evacuated tube any size complete all as specified and directed.

Supply and fixing 3 core twisted aluminium flexiable weather proof cable PVC insulated and unsheathed multistranded copper conductor of size 4 sq mm confirming to relevent IS complete all as specified & directed including taking out old unserviceable cable.

S & F in repair of u/s OT light bulb 50 Watt 12 V as per existing make & watt suitable for existing OT lights complete all as specified and as directed.

Supply and fixing of maintenance free lead acid sealed battery 12 Volts 7 Ah complete all as specified.

Supply and fixing of maintenance free lead acid sealed battery 12 Volts 14 Ah complete all as specified.

Supply and fixing of relay 5 Amp 240 Volt AC/28VDC all as specified and directed Make :- omrom model No MY4N or equivalent in Legrand, C&S.

M&L earthing complete with galvanised steel earth plate electrode 60cmx60cmx6 mm thick buried directly in ground vertically to a depth not less than 2.25m below ground level with top edge of the earth plate at a depth not less than 1.5m below ground level earth plate surrounded by and packed with 15cm thick layer of char coal dust and common salt earth lead GI wire 4.00mm dia by means of volts, nuts, check nuts and washers of galvanised iron and thimble and other end of earth wire connected to main switch board and protected by galvanised iron pipe light grade 15mm bore and water pipe 20mm bore GI light grade with funnel and wire mesh PCC chamber in cement in cement concrete 1:3:6 type C-2 and RCC cover all as specified and shown in elect plate No 3 of SSR Part-I of 2009.

S&F in replacement rotational moulded polyethylene water storage tanks (Cylindrical, vertical with closed top) double layer confirming to IS:12701-96 complete including provision of all inlet outlet overflow and drain pipe fitting complete, all as specified and directed by Engineer in Charge capacity 300 Ltrs.

M&L for sub main wiring with approved colour coding as per IS (Red, Black and Green for single phase circuits) with Two runs of 6 Sq mm as current carrying conductor and one run of 6 Sq mm as earth conductor PVC insulated FRLS cable with multi stranded copper conductor of nominal cross section area as under and drawing into and including concealed PVC non metallic rigid conduit medium grade complete all as specified incl taking down old u/s sub main wiring. Note:- Three runs of wire and one run of pipe shall be measured as one meter only for payment purpose.

M/S JAI PRAKASH GOEL

M/S SETHI BROTHERS