REPAIR TO BRICK EDGING, PAVEMENT, PLINTH PROTECTION AND BOUNDARY WALL AT EAST SIDE OF LEHL MARG AT BINNAGURI MIL STATION UNDER GE (SOUTH) BINNAGURI

Amount

Demolition of cement concrete un reinforced in ground floor and paving n exc 15cm thick (below or above ground level) complete all as specified and directed.

M & L for plain cement concrete (1:4:8) type D-2 using 40mm graded stone aggregate as in foundation filling and mass concrete complete all as specified and directed.

M&L for hardcore broken stone boulder of guage n.exc 63mm, deposited, spread and levelled in layers n.exc 15cm thick watered and rammed to true surface complete all as specified and directed.

M&L for 100mm thick PCC 1:2:4 Type B-2 using 40mm graded stone aggregate in pavement/hard-standing or receiving floor compacted using screed vibrator surface finished even and smooth without using extra cement, including necessary form work, complete all as specified and directed.

M&L for 75mm thick plain cement concrete 1:3:6 type C2 (using 40mm graded stone aggregate) as in plinth protection and footpath finished even and smooth without using extra cement, including making joints to the full depth of PCC at every 3 metres and at every change of direction and filling the same with & including bitumen and sand 1:2 by weight complete all as specified and as directed.

M&L for plain cement concrete 1:3:6 Type C1 (using 20mm graded stone aggregate ) as in drains, surface channels, etc including necessary form work complete all as specified and directed.

Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete,using extra cement, including form, moulds,mitred/stopped ends etc complete all as specified and directed.

Add or deduct for each 25mm girth or part thereof over or under 30cm ---------------- Ditto -----------. (Only rate to be quoted)

M&L for 60mm thick M-35 grade factory made vibratory compected cement concrete rubber moulded, interlocking paver block any shape and size conforming to IS 15658-2006 with grey cement and pigment as approved laid over and including 25mm thick consolidated sand cushion and joints filled with sand including dismantling existing paver block complete all as specified and directed.

M & L for surface dressing n. exc. 15 cm deep in any type of soil complete all as specified and directed.

M&L for machine pressed ,pre-polished and chemically treated, smooth finished ,exterior graded coloured cement concrete Chequered tiles 30cm x 30cm x 25mm thick, set, jointed and pointed in neat cement slurry in floors over and including 15mm thick screed bed or bedding layer in cement mortar 1:6 complete all as specified and directed.

M&L for bricks ,sub class ' B' laid dry on edge is equal to the width of brick in flooring laid to herringbone pattern or diagonally (Raking or circular cutting, and waste measured separately) over 25mm thick sand layer including taking out old bricks complete all as specified and directed.

S&F in repair 110mm bore PVC (SWR) pipe single socketed in any length with rubber ring joints, fixed to trenches, floor complete all as specified and directed.

Demolition of brick masonary work, built in cement mortar including all quions, arches, pillars, etc. but excluding precast concrete articles etc. and deposited where directed complete all as specified and directed.

Taking down cement or cement lime plaster any description from walls/ceiling etc including racking out joints, hacking for key & scrubbing down with water complete all as specified and directed.

M&L for brick work with old size sub class 'B' bricks, straight or curved on plan exceeding 6m mean radius built in cement mortar 1:6 complete all as specified and directed.

M&L for brick work with old size sub class 'B' bricks, straight or curved on plan to any radius in half brick thick wall built in cement mortar 1:4 complete all as specified and directed.

Material and labour fo preparation of new plastered or unplastered surafces of wall and applying three coats of white wash complete all as specified and directed.

M&L rendering 15 mm thick in cm 1:4 on fair faces of brick work or concrete surfaces finishing surfaces even and smooth without using extra cement, complete all as specified and as directed.

M&L for 410x300x100 mm machine pressed precast cement concrete kerb stone, M20 grade all as per IS 5758 - 2005 specification including set and jointed in CM 1:4 finished even and fair without using extra cement including taking out old materials complete all as specified and as directed.

M&L for preparation of newly or previously untreated concrete surfaces and applying two coats of synthetic enamale paint over a coat of primer complete all as specified and directed.

Demolition of RCC of any description and in any position not otherwise specifically provided for including cutting reinforced as required complete all as specified and directed.

M&L for providing RCC 1:2:4 type B-1( using 20mm graded stone aggregate) as in precast cover slab and the like inclluding necessary formwork complete all as specified and directed.

M&L for TMT bars 8 mm dia, cut to length, bent to shape required including cranking, bending spirally for hooping for columns and binding with and including mild steel wire (annealed) not less than 0.9mm dia complete all as specified and directed.

SCHEDULE OF CREDIT Rate quoted by the Tenderer for this schedule should not be less than rate assessed by the department shown on estimated rate column for the respective items and total amount under col No 53 will be adjusted accordingly.

Old unserviceable aggregate

Old unserviceable pvc pipes

Old unserviceable brick bats

Old unserviceable scrap iron

samrat saw mill and joinery workshop

M/s. RAMPHAL GARG

M/S VIRENDRA KUMAR SINGH

L. B. SHARMA