REPAIR PAINTING AND POLISHING OF CERTAIN ITEMS OF FURNITURE OF OTM AND MD ACCN UNDER GE DEHRADUN

Amount

Repair toTable writing FD- 249,275

Removing of old unserviceable existing top and S&F new top of size 1145x600x18 mm made of MDF board as approved by GE duly fixed with 4 mm thick Teak wood beading all round the top duly finished and polished .

Removing of old unserviceable leg and S&F new leg made out of seasoned teak as per drg including french polishing to repaired portion only to match the existing surface.

Removing of old unserviceable board from sides and S&F new MDF board 18/19 mm thick on the sides as per drg .

Removing of old unserviceable plywood from back and S&F new plywood commercial 6 mm thick ISI marked as per drg.

Removing of old unserviceable drawer and S&F new drawer as per drg.

Removing of old unserviceable knob and S&F new CP knobs 40 mm as per drg.

Removing of old unserviceable doors and S&F new doors made out of 18 mm thick MDF board one side teak face and 4 mm thick teak wood beading all round duly fitted with planty fittings all as per directed by Engr-in charge

Removing of old unserviceable long rail and S&F new long rail made out of seasoned teak wood duly finished.

Removing of old unserviceable short rail and S&F new short rail made out of seasoned teak wood duly finished.

Removing of old unserviceable stiffner and S&F new stiffner made out of seasoned teak wood duly finished.

M&L for two coat french polishing with high glow finish to complete sides as per drg.

REPAIRS TO CHAIR DINING OFFICER (MAP- FD/MAP/II/04)

Removing of old Unserviceable front leg & supply & fixing new front leg made out of seasoned teak wood size shall be as per drawing complete all as specified and shown on drawing.

Removing of old Unserviceable rear leg & supply & fixing new rear leg made out of seasoned teak wood size shall be as per drawing complete all as specified and shown on drawing.

Removing of old unserviceable TW stiffeners and S&F new TW stiffeners made out of seasoned teak wood size shall be as per drawing complete all as specified and shown on drawing.

Removing of old unserviceable straps back side and S&F new straps back side made out of seasoned teak wood size shall be as per drawing complete all as specified and shown on drawing.

Removing of old unserviceable complete seat and S&F new seat made out of 75 mm thick 40 density foam, covered tapesty cloth not less than Rs 350 per mtr fitted on 12 mm thick BWR ply seat complete all as directed by Engr-in -charge.

Removing of old Unserviceable TW front & side rails S&F new rails made out of seasoned teak wood size shall be as per drawing complete all as specified and shown on drawing.

M&L French Polishing two or more coats to repaired chairs complete with high class finish including filling holes with wood filler including preparation of surfaces by proper sand papering complete all as specified and as shown on drawing.

REPAIRS TO SIDE BOARD (FD- 441,241,1112)

Removing of old unserviceable existing shelves from side board and S&F new shelves made out of 12 mm plywood of side board complete to match the original as shown on drg .

Removing of old unserviceable existing top and S&F new top made out of 18/19 mm MDF board exterior grade-I as shown on drg .

Removing of old unserviceable plywood of back and S&F new 6 mm thick ISI marked commercial plywood back as per drg .

Removing of old unserviceable side plywood and S&F new side 6 mm thick plywood ISI marked as per drg.

Removing of old unserviceable drawer and S&F new drawer as per drg.

Removing of old unserviceable knob and S&F new CP knobs 40 mm as per drg.

Removing of old unserviceable doors and S&F new doors made out of 18 mm thick MDF board one side teak face and 4 mm thick teak wood beading all round duly fitted with planty fittings all as per directed by Engr-in charge

M&L for two coat french polishing with high glow finish to complete sides as per drg.

REPAIRS TO FORM WITHOUT BACK : Drg- FD-78 (M)

Removing of old U/S existing plank of form without back seat and S&F new plank of size 1500x300x25 mm thick of Ist class shisham wood (duly finished & polished) and fixing with nut & bolt, washer of size 75 mm long & 8 mm dia as per drg.

Removing of old paint and M&L painting to form without back frame with two coat of black enamelled paint of approved make complete.

REPAIRS TO FORM WITH BACK : Drg- FD-78 (M)

Removing of old U/S existing plank of form seat and S&F new plank of size 1500x300x25 mm thick of Ist class shisham wood (duly finished & polished) and fixing with nut & bolt, washer of size 75 mm long & 8 mm dia as per drg.

Removing of old U/S existing plank of back and S&F new plank of size 1500x300x25 mm thick of Ist class shisham wood (duly finished & polished) and fixing with nut & bolt, washer of size 75 mm long & 8 mm dia as per drg.

Removing of old paint and M&L painting to form with back frame with two coat of black enamelled paint of approved make complete.

REPAIR TO CHARPOY IP STEEL FRAME (FD/MAP/II/01)

Removing of old u/s ply wood and S&F 12 mm thick plywood top of size 1980x900 mm exterior grade, BWR , ISI marked of approved make, fitted with suitable Nos and sizenut,bolt & washers on charpoy steel frame, complete all as specified and shown on drg.

M&L for sprey painting to frame with two coat of synthetic enamelled paint of approved make including necessary scraping of surfaces with superior finishing complete.

REPAIR TO BED HARD STEEL FRAME : Drg No-FD/E6/MAP/08(R)

Removing of old u/s ply wood and S&F 12 mm thick plywood top of size 1980x900 mm exterior grade, BWR , ISI marked of approved make, fitted with suitable Nos and sizenut,bolt & washers on Bed hard steel frame, complete all as specified and shown on drg.

M&L for sprey painting to frame with two coat of synthetic enamelled paint of approved make including necessary scraping of surfaces with superior finishing complete.

REPAIRS TO DESK OVERALL SIZE 36"X18"X30" STEEL (TP)

Removing of old U/S existing top box of desk and S&F new top box of pre- laminated MDF board 18 mm thick exterior grade- I, type - II and screwed. Edging/ beading of 4 mm wide of teak wood ply duly french polished. Edging/ beading all round the top faces of timber complete all as directed by Engr-in charge.

Removing of old U/S existing top of bench and S&F new top of bench of pre- laminated MDF board 18 mm thick exterior grade- I, type - II and screwed. Edging/ beading of 4 mm wide of teak wood ply duly french polished. Edging/ beading all round the top faces of timber complete all as directed by Engr-in charge.

M&L for sprey painting of two coats of synthetic enamelled paint of approved make on steel frame of desk with high class finishing including necessary scraping of surfaces complete.

REPAIRS TO CHAIR SCHOOL WITH HAND BOARD STEEL (Drg- FD/E6/MAP/05)

Removing of old U/S existing broken seat and S&F new PVC seat of Neel Kamal/Cello/Supreme / AMKO with screw as approved by Engr-in -charge complete all as per drg.

Removing of old U/S existing hand board & steel clamp round type and S&F of new hand board & steel clamp round type as per drg. Hand board shall be 18/ 19 mm thick prelaminated MDF as approved by GE duly screwed. Edging all round the hand board shall be 04 mm thick teak wood all exposed faces of timber duly treated with french polish complete as directed.

M&L for sprey painting of two coats of synthetic enamelled paint of approved make on steel frame of chair with high class finishing including necessary scraping of surfaces complete.

RE-CANNING OF CHAIR VERANDAH (Drg- FD-256)

M&L for removing of old/broken/ unservisable plastic cane and re-canning of chair verandah with new plastic cane 3/4 mm semi round of white colour ,best quality of approved make including painting with two coats osynthetic enamel paint white colour on entire steel/ iron surface of chair before re- canning and including provision of new hard rubber shoe 20 mm dia (04 Nos in each chair) at bottom of legs after taking out old cane all as directed by Engr-in charge. caning shall be done in mat pattern.

M&L Spray painting two coat of synthetic enamel Paint of silver shade colour paint & door shall be silver shade paint on old painted steel surface to under mentioned items of steel furniture with high class finish including necessary scrapping, denting and to smoothness the surface with sand paper complete all as specifried and as directed by Engr-in-charge

Almirah large steel with shelves/half hanging/ half shelves Complete internal and external surface. (FD-67, FD-1033, FD-1031)

Almirah steel medium with shelves/half hanging/ half shelves Complete internal and external surface. (FD-243 1 FD-1032)

M&L Spray painting two coat of synthetic enamel Paint of smoke grey colour paint on old painted surface to under mentioned items of steel furniture with high class finish including necessary denting and to smoothness the surface by cleaning, removing old paint marks etc, rubbing with sand paper No 02, filling gaps/ holes/ bore holes etc with paste filler (Complete internal and external surface), all as specified and directed by Engr-in-Charge.

Book Shelf open small/Large steel/Book case steel/cabinet Map steel.(FD-60 FD-69 FD-1034)

Table office officer steel. (FD-84 FD-1003)

Table office Clerk Steel , table 3'x3' with & without drawers, table 3'x3' steel . (FD-84 FD-1009 FD-1007)

Loker SKD 562 ( complete internal & external surfaces)

Locker bed side steel . (FD- 1029)

Table dining OR’s, table serving steel. (FD- 165 FD-90) ( complete internal & external surfaces)

Repair to Almirah large Steel with Shelves/ Almirah large Steel half hanging and half Shelves, (FD- 67, 1033, 1031)

Removing old broken hinges and fixing new hinges through gas welding .

Removing of U/S lock with locking device/chakkra and S&F New lock of 7 lever with duplicate key of best quality fancy type ISI marked as approved.

Removing of unservicable handles and S&F new CP handle as per drg.

Removing of U/S legs and S&F new legs made out of PBI Sheet 1.6 mm thick as per drg.

Removing of U/S shutters and S&F new shutter made out of PBI Sheet 1.00 mm thick as per drg.

Removing of U/S shelves and S&F new shelves made out of PBI sheet 1.00 mm thick as per drg.

Providing stoppers to hold shelves of GMS iron as per drg & all items shall be repair direction by Engr-in- Charge

Removing existing u/s Brass Bush Barrel and S&F new Brass Bush Barrel of suitable pattern to the locking system of Almirah steel

Removing existing u/s three way locking device and SF new three way locking device with plunger rod MS complete to match the original of suitable pattern to the locking system of Almirah steel

Repair to Almirah Steel Medium/Small with shelves, (FD- 1032, 243)

Removing old broken hinges and fixing new hinges as per existing through gas welding.

Removing of U/S lock with locking device/chakkra and S&F New lock of 7 lever with duplicate key of best quality fancy type ISI marked as approved.

Removing of unservicable handles and S&F new handle chromium plated as per drg

Removing of U/S legs and S&F new legs made out of MS Sheet 1.6 mm thick as per drg.

Removing of U/S shutters and S&F new shutter made out of MS Sheet 1.00 mm thick as per drg.

Removing of U/S shelves and S&F new shelves made out of MS sheet 1.00 mm thick as per drg.

Providing stoppers to hold shelves of GMS iron as per drg & all items shall be repair direction by Engr-in- Charge

Removing existing u/s Brass Bush Barrel and S&F new Brass Bush Barrel of suitable pattern to the locking system of Almirah steel

Removing existing u/s three way locking device and SF new three way locking device with plunger rod MS complete to match the original of suitable pattern to the locking system of Almirah steel

Repair to Locker Bed Side Steel (FD- 1029)

Removing of old broken unserviceable hasp and staples and S&F New hasp and staple of 100 mm size of mild steel as per drg.

Removing of old broken handle and S&F New handle of chormium plated handle 100 mm size of as per drg.

Removing of U/S legs and S&F new leg made out of MS Sheet 1.6 mm thick as per drg.

Removing of U/S Shelves and S&F new shelves made out of MS Sheet 1.6 mm thick as per drg.

Removing old broken hinges and fixing new hinges through gas welding .

Removing of U/S & rusted hanging rod and S&F new chromium plated 25mm dia Hanging rod.

Repair to Book Case Steel 66"x33"x2' with glass (FD-1028)

Removing of u/s plain glass, S&F new 76 cm x 22 cm x 5 mm plain glass as per drawing .

Removing of U/S lock with locking device/chakkra and S&F New lock of 4 lever with duplicate key of fancy type ISI marked as approved .

Removing of unservicable handles and S&F new handle of Godrej pattern as per drg. All book case steel shall be repair as per direction by E-in-Charge

M&L for polishing with French polish to under mentioned item of furniture articles with high class finish after rubbing old polish. The surfaces shall to rubbed down to smoothness with sand paper and duster the porous in wood shall be filled with filler solution and again rubbed with sand to make the surfaces complete smooth and applying french polishing on wooden surfaces of following furniture article with one or more coat till the surfaces in glossy complete all as specified and directed by Engr-in-Charge.

Book Case wooden/Book case library pattern, Almirah mess utensil/ Almirah MAP, book shelf open small/ large.( Drg No.:- FD- 26,FD-93,FD-45, FD-335, FD-356, FD- 355)

Bed ply wood top. Drg No. (FD-246)

Bin linen small/large. Drg No. (FD-15, FD-224)

Chair writing/CBA/CB office/CBB/dining/Chair easy FD/NF/Chair wooden bottom (BKB)/BKA/Chair CBA with hand rest etc. Drg No. (FD-250, FD-280, FD-228, FD-279, FD-229, FD-256, FD-285)

Hat stand with mirror. Drg No. (FD-233)

Stool dressing CB. Drg No. (FD-27)

Table writing Med/Table writing FD/ Table office clerk wooden/ Table office officer wooden/ Table 900mmx 900mm x 760mm /Table 3’x2’ with or without drawer/ Table writing cadets/ Table Examination/ Table one piece/ Table two pieces for all purposes/ Table dining 6 Persons. Drg No. (FD-33, FD-240, FD-249, FD-238, FD-272, FD-273, FD-224, FD-283, FD-232, FD-91, FD-284)

Table peg/Table centre/Teapoy FD wooden/Table bed side FD with /without drawer Drg No. (FD-84, FD-227, FD-236, FD-276, FD-248, FD-235, FD-278)

Table dressing Gents with mirror/ Table dressing ladies with mirror (Mirror portion shall be left un-polished). Drg No. (FD-31 FD-230)

Sofa set 4 seated/5 seated. Drg No. (FD-256, FD-281, FD-373, FD-234)

REPAIR/REFIXING PLY TOP CHARPOY GI (FD-220)

Removing of old U/S plywood and S&F new 12 mm thickness plywood top of size 1980x900mm exterior grade BWR type (Nos of ply 7) ISI marked fixed with flat/dome head MS galvanished iron carriage bolts. The edge of plywood shall be smoothened alround and corner shall be rounded to a radious of 1 cm iron carriage, 10 Nos of round headed bolts with nut & washer of size 5mmx 75mm after drilling the holes at equal distance on rails (03Nos on each long rail & 02Nos on each Short Rails) & all as directed by the Engr-in-Charge/GE & as per shown on drg. Make : Century/Green ply/Archid ply.

Removing of Old unsv Long rails from charpoy GI Pipe and S&F of new long rail made out of GI Pipe 32mm nominal dia Med Grade of Make: TATA/Swastik/Jindal duly threaded at both end upto 45mm & all as directed by the Engr-in-Charge. Note : U/S long rails be converted into 01short rail and 01leg & measured in Sch No. 18.03 & 18.04 .

Removing of Old unsv Short rails from charpoy GI Pipe and fixing only Short rail retrieved and made out from schedule No 18.02 duly threaded at both end upto 45mm & all as directed by the Engr-in-Charge Note: U/S Short rails be converted into 01leg and measured in Sch 18.04

Removing of Old unsv Legs from charpoy GI Pipe and fixing only legs retrieved made out from old long rails/short rails, retrieved under item Sl No 18.02 & 18.03 here in before duly threaded at one end upto 45mm and all as directed by the Engr-in-Charge

Re-threading of rusted thread 32mm GI Pipe upto 45mm of old long rails/Short Rails/Legs and tightning and assembling the frame of Charpoy GI pipe to make a frame of charpoy as shown on drg.

Removing of Old/unsv broken existing elbow of charpoy GI pipe and S&F new elbow GI 03Way 32mm Med Grade ISI marked (as approved by the Engr-in-Charge/GE)

Removing of Old/unsv broken existing check nut of charpoy GI pipe and S&F new elbow check nut 32mm Med Grade ISI marked (as approved by the Engr-in-Charge/GE)

RE-CANNING OF VARIOUS TYPES OF FURNITURE (FD-228/FD-224/ FD-250/ FD-75/ Various Drgs of canned chair)

M&L for removing of old/broken/ unservisable plastic cane and re-canning of chair dinnig, chair CB without arms/chair writing,chairs CB with arms,chairs writing, chair CB office, chair easy FD/NF, chair, stool dressing CB & Bin solied linen with 2 to 2.5mm semi round cane plastic of white colour. Rest all as per drgs. The canning work shall be done as per Godraj pattern. Can should be in white colour (Non recycled) & make as approved.

Repair/ Recushioning of Sofa Set 5 Seats/4 Seats. FD-281

Removing of old unsv covers from detachable cushion foam and supply & fixing of cover of tapesty cloth (not less than Rs. 550 per mtr) locally available duly stitched as per size of seat and one side be stitched with zip chain of approved quality complete all as specified and shown on drgs and approved by Garrison Engineer.

Supply and fixing of new foam cushion 100 mm thick and 40 density, size 22”x21”x4” duly covered with tapestry cloth , duly stiched as per size of seat & one side be stitched with zip chain (type/design/colour approved)(not less than Rs. 550 per mtr) of appropriate quality. Make:- Sleepwell /Kurlon or equivalent as approved by GE.

Avtarsinghchaddhaandcompany

M/SDoon furnishers