Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹2.7 LAccepted-AOC | L1 | Accepted-AOC Accepted Vide Resolution No.20(1). dtd.21-1-2026 of Thalayolaparambu GP | |
| 2 | L2₹2.8 L+₹3,056.96 (1.11%)Rejected-AOC | L2 | Rejected-AOC Higher rate and hence rejected |
| Sl No | Description | Qty | Unit | Riju k jamal pwd contractor L2 | T G GIREESAN L1 |
|---|---|---|---|---|---|
| 1.00CONSTRUCTION OF TOILET | |||||
| 1.00 | 15.23.1:Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead.For thickness of tiles 10 mm to 25 mm | 74.75 | sqm | 75.87 ₹5,671.28 | 75.04 ₹5,609.24 Lowest |
| 1.00 | 11.41.2:Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS : 15622, of approved make, in all colours and shades, laid on 20 mm thick cement mortar 1:4(1 cement : 4 coarse sand), including grouting the joints with white cement and matching pigments etc., complete.Size of Tile 600 x 600 mm. | 74.75 | sqm | 1,776.49 ₹1,32,792.63 | 1,756.95 ₹1,31,332.01 Lowest |
| 1.00 | 50.12.5.1:Providing and fixing false ceiling with e board classic tile or equivalent make of size 610x610x4 mm ceiling of approved quality in aluminium frame work with necessary screws etc complete ( aluminium frame work shall be paid separately) | 53 | sqm | 793.83 ₹42,072.99 | 785.1 ₹41,610.3 Lowest |
| 1.00 | 10.1:Structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. | 73.71 | kilogram | 116.69 ₹8,601.22 | 115.41 ₹8,506.87 Lowest |
| 1.00 | 21.1.1.1:Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS : 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminnium snap beading for glazing /paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge.(Glazing, paneling and dash fasteners to be paid for separately):
For fixed portionAnodised aluminium (anodised transparent or dyed to required shade according to IS : 1868, Minimum anodic coating of grade AC 15) | 31.8 | kg | 544.2 ₹17,305.56 | 538.21 ₹17,115.08 Lowest |
| 1.01 | 50.9.3.1:Providing and fixing paneled or paneled and glazed shutters for doors, windows and clerestory windows, 30 mm thick shutters including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws, excluding paneling which will be paid for separately, all complete as per direction 0f Engineer in- charge. using Anjili/ Jack wood | 1.85 | sqm | 3,230.18 ₹5,969.37 | 3,194.65 ₹5,903.71 Lowest |
| 1.01 | 13.47.1:Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade:New work (Two or more coats applied @ 1.43 ltr/ 10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/ 10 sqm) | 282.07 | sqm | 203.59 ₹57,427.65 | 201.35 ₹56,795.8 Lowest |
| 1.01 | 13.61.1:Painting with synthetic enamel paint of approved brand and manufacture to give an even shade:Two or more coats on new work | 49.32 | sqm | 164.86 ₹8,130.9 | 163.05 ₹8,041.63 Lowest |
Tender Value
₹2.8 L
EMD Value
₹6,949
Closing Date
15 Nov 2025, 2:00 pmClosed
SOUMYA.V.S
Office of the Assistant Engineer LIDEW Section Thalayolaparambu Grama Panchayat
TLP 2025-26 Pro.125/26 Renovation of Parakandam Samskarika Nilayam w-11
2025_LSGD_819305_1
54/2025-26/AE/LSGD/TLP
Open Tender
Civil Works - Buildings
Item Rate
180 days
Thalayolaparambu GP
Please refer Tender documents.
7 documents required · 7 mandatory
₹615
Yes
₹6,949
Yes
18 Apr 2026
7 Nov 2025
17 Nov 2025
7 Nov 2025
15 Nov 2025
7 Nov 2025
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1CONSTRUCTION OF TOILET | |||||
| 1.001 | 15.23.1:Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead.For thickness of tiles 10 mm to 25 mm | 74.75 | sqm | - | - |
| 1.002 | 11.41.2:Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS : 15622, of approved make, in all colours and shades, laid on 20 mm thick cement mortar 1:4(1 cement : 4 coarse sand), including grouting the joints with white cement and matching pigments etc., complete.Size of Tile 600 x 600 mm. | 74.75 | sqm | - | - |
| 1.003 | 50.12.5.1:Providing and fixing false ceiling with e board classic tile or equivalent make of size 610x610x4 mm ceiling of approved quality in aluminium frame work with necessary screws etc complete ( aluminium frame work shall be paid separately) | 53 | sqm | - | - |
| 1.004 | 10.1:Structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. | 73.71 | kilogram | - | - |
| 1.005 | 21.1.1.1:Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS : 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminnium snap beading for glazing /paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge.(Glazing, paneling and dash fasteners to be paid for separately):
For fixed portionAnodised aluminium (anodised transparent or dyed to required shade according to IS : 1868, Minimum anodic coating of grade AC 15) | 31.8 | kg | - | - |
| 1.006 | 50.9.3.1:Providing and fixing paneled or paneled and glazed shutters for doors, windows and clerestory windows, 30 mm thick shutters including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws, excluding paneling which will be paid for separately, all complete as per direction 0f Engineer in- charge. using Anjili/ Jack wood | 1.85 | sqm | - | - |
| 1.007 | 13.47.1:Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade:New work (Two or more coats applied @ 1.43 ltr/ 10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/ 10 sqm) | 282.08 | sqm | - | - |
| 1.008 | 13.61.1:Painting with synthetic enamel paint of approved brand and manufacture to give an even shade:Two or more coats on new work | 49.32 | sqm | - | - |
stage.html
html • 0.04 MB
tech_eval.pdf
fin_eval.pdf
aoc.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Tendernotice_1.pdf
PDF • 0.10 MB
Tendernotice_2.pdf
PDF • 0.02 MB
Tendernotice_3.pdf
PDF • 0.02 MB
PRELIMcompressed.pdf
Tender Document • 0.04 MB
Tendernotice_1.pdf
Tender Document • 0.10 MB
sbdcompresse.pdf
Tender Document • 0.93 MB
fotcompres.pdf
Tender Document • 0.01 MB
affidcomp1.pdf
Tender Document • 0.02 MB
Tendernotice_3.pdf
Tender Document • 0.02 MB
Tendernotice_2.pdf
Tender Document • 0.02 MB
BOQ_1373335.xls
BOQ • 0.30 MB
BOQ_1373335.xls
BOQ • 0.30 MB
PRELIMcompressed.pdf
Tender Documents • 0.04 MB
sbdcompresse.pdf
Tender Documents • 0.93 MB
fotcompres.pdf
Tender Documents • 0.01 MB
affidcomp1.pdf
Tender Documents • 0.02 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .