Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹60,182Admitted-Fee/PreQual/Technical/Finance | ₹60,182 | L1 | Admitted-Fee/PreQual/Technical/Finance |
| 2 | L2₹63,780+₹3,598 (5.98%)Admitted-Fee/PreQual/Technical/Finance | ₹63,780+₹3,598 (5.98%) | L2 | Admitted-Fee/PreQual/Technical/Finance |
| 3 | L3₹69,276+₹9,094 (15.1%)Admitted-Fee/PreQual/Technical/Finance | ₹69,276+₹9,094 (15.1%) | L3 | Admitted-Fee/PreQual/Technical/Finance |
| 4 | L4₹82,750+₹22,568 (37.5%)Admitted-Fee/PreQual/Technical/Finance | ₹82,750+₹22,568 (37.5%) | L4 | Admitted-Fee/PreQual/Technical/Finance |
| Sl No | Description | Qty | Unit | N KANDHASAMY L1 | DHANALAKSHME CONSTRUCTIONS L2 | RS BUILDTECH L4 | B SUNDAR L3 |
|---|---|---|---|---|---|---|---|
| 1.00 | Manufacturing supplying and fixing of MILD STEEL Window made out of 40 x 40 x 6 mm M.S angle for outer frame, 35 X 35 X 5mm M.S.Angle for outer frame of shutter. The entire shutter area shall be covered with CRC sheets ( 18 G ) with 5Nos,of stiffners using M.S.Flats of size 25 X 6mm at equal intervals horizontally. The corners of the frames and shutter with CRC sheets shall be welded by adopting flash butt welding or any other suitable method. Provision towards 3Nos, of Hinges incase of single shutters / 6Nos,of Hinges incase of Double shutters of 125 X 31 X 1.25mm size placed at appropriate intervals and provisions shall be made for Tower bolts 2Nos, Aldrop 1No. The frame shall be provided with 6Nos,of Hold fast of 200mm length using 50 X 6mm M.S.Flat. The entire frame and shutter shall be provided with one coat of red oxide primer including cost of hold fasts,hinges, locking arrangements, handles wind appliences etc., complete and as directed by the departemental officers. | 2 | M2 | 3,657 ₹7,314 Lowest | 3,900 ₹7,800 | 4,000 ₹8,000 | 4,206 ₹8,412 |
| 2.00 | Plastering in cement mortar 1:4 mix to 20 mm thick with of the following proportions at all heights and depths above or below plinth level including scaffolding curing etc. complete complying with standard specifications and drawings and as directed by Departmental Engineers. | 26 | M2 | 517 ₹13,442 | 550 ₹14,300 | 280 ₹7,280 Lowest | 595 ₹15,470 |
| 3.00 | Painting two coats for Exterior surface with approved Exterior Plastic Emulsion paint approved quality and colour over a priming coat, including thorough scrapping, clean removal of dirt, etc complete and including necessary plaster of paris, putty, wherever required etc, complete as per standard specification. | 128 | M2 | 157 ₹20,096 | 170 ₹21,760 | 140 ₹17,920 Lowest | 181 ₹23,168 |
| 4.00 | Painting two coats with Ready Mixed Enamel Paint over the new iron works of approved quality and colour without priming coat including the cost all materials etc.,complete, in all floors. | 15 | M2 | 129 ₹1,935 Lowest | 138 ₹2,070 | 130 ₹1,950 | 148 ₹2,220 |
| 5.00 | Wiringwith2x1.5sq.mm. PVCinsulatedunsheathedFRLSSCcopperconductorof1100Vgrade insuitablePVCrigidpipeonwallandceilingwithPVCaccessorieswithTWswitchboxwith5AFTswitchinflushwithwallcoveredwithhylemsheet of 3mm thick with painting of suitable colour for open PVC light point / fan point (for electronic regulator)t(S.D.21) | 7 | No | 1,771 ₹12,397 Lowest | 1,800 ₹12,600 | 6,000 ₹42,000 | 2,037 ₹14,259 |
| 6.00 | Supply and fixing of WT bulk head fitting with guard suitable for 15 W LED Bulb (SD 83) | 7 | No | 714 ₹4,998 Lowest | 750 ₹5,250 | 800 ₹5,600 | 821 ₹5,747 |
Tender Value
₹1.1 L
EMD Value
₹1,100
Closing Date
8 Sept 2026, 3:00 pmClosed
Executive Officer
Siruvani main road Pooluvapatti town panchayat Pooluvapatti
pecial repairs to the ward no 9 Nathegoundenpudhur Elementry school Noon meal centre Building in Pooluvapatti Town Panchayat
2026_DTP_699312_1
158-2/2026
Open Tender
Civil works
Works
180 days
Pooluvapatti
as per norms
2 documents required · 2 mandatory
₹0
₹1,100
Pooluvapatti town panchayat
8 Sept 2026
29 Aug 2026
8 Sept 2026
29 Aug 2026
8 Sept 2026
29 Aug 2026
29 Aug 2026 - 8 Sept 2026
29 Aug 2026
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Manufacturing supplying and fixing of MILD STEEL Window made out of 40 x 40 x 6 mm M.S angle for outer frame, 35 X 35 X 5mm M.S.Angle for outer frame of shutter. The entire shutter area shall be covered with CRC sheets ( 18 G ) with 5Nos,of stiffners using M.S.Flats of size 25 X 6mm at equal intervals horizontally. The corners of the frames and shutter with CRC sheets shall be welded by adopting flash butt welding or any other suitable method. Provision towards 3Nos, of Hinges incase of single shutters / 6Nos,of Hinges incase of Double shutters of 125 X 31 X 1.25mm size placed at appropriate intervals and provisions shall be made for Tower bolts 2Nos, Aldrop 1No. The frame shall be provided with 6Nos,of Hold fast of 200mm length using 50 X 6mm M.S.Flat. The entire frame and shutter shall be provided with one coat of red oxide primer including cost of hold fasts,hinges, locking arrangements, handles wind appliences etc., complete and as directed by the departemental officers. | 2 | M2 | - | - |
| 2 | Plastering in cement mortar 1:4 mix to 20 mm thick with of the following proportions at all heights and depths above or below plinth level including scaffolding curing etc. complete complying with standard specifications and drawings and as directed by Departmental Engineers. | 26 | M2 | - | - |
| 3 | Painting two coats for Exterior surface with approved Exterior Plastic Emulsion paint approved quality and colour over a priming coat, including thorough scrapping, clean removal of dirt, etc complete and including necessary plaster of paris, putty, wherever required etc, complete as per standard specification. | 128 | M2 | - | - |
| 4 | Painting two coats with Ready Mixed Enamel Paint over the new iron works of approved quality and colour without priming coat including the cost all materials etc.,complete, in all floors. | 15 | M2 | - | - |
| 5 | Wiringwith2x1.5sq.mm. PVCinsulatedunsheathedFRLSSCcopperconductorof1100Vgrade insuitablePVCrigidpipeonwallandceilingwithPVCaccessorieswithTWswitchboxwith5AFTswitchinflushwithwallcoveredwithhylemsheet of 3mm thick with painting of suitable colour for open PVC light point / fan point (for electronic regulator)t(S.D.21) | 7 | No | - | - |
| 6 | Supply and fixing of WT bulk head fitting with guard suitable for 15 W LED Bulb (SD 83) | 7 | No | - | - |
stage.html
html • 0.02 MB
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.41 MB
tn2.pdf
Tender Documents • 0.39 MB
BOQ_840661.xls
BOQ • 0.34 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .