SPECIAL REPAIRS TO INTERNAL ROAD (APPROX 310 MTRS) AT AMBAJI LINES AND BLDG NO NP-03 TOWARDS STP (400 KLD) AT MILITARY STATION DHRANGADHRA UNDER GE (A) GANDHINAGAR

Material and labour for preparing black top surfaces by brushing with wire brush for removing caked mud etc sweeping with brooms and finally fanning the cleaned surface with gunny bags to remove all loose dirt etc and applying a priming/tack coat with paving bitumen primer 80/100 (VG-10) grade at 2.5 Kg/10 Sqm complete all as specified and as directed.

Material and labour bituminous premix ashphaltic semi dense concrete 30 mm consolidated thickness with 5.5 % binder content by weight of total mix using paving bitumen 60/70 (VG 30) grade laid by mechanical paver rolled and compacted to required camber and gradient by 8-10 Ton vibro roller complete all as specified and as directed by Engr-in-Charge.

Material and labour for road line marking painting (Reflective) exc 0.09 m and n exc 0.5 m wide thermoplastic componant with reflective glass beads on bituminous road and laying with hot applied thermoplastic componant 2.5 mm thick reflective glass beads @ 250 gm per Sqm area applied glass beads as per IRC 35. The finish surface are to be levelled uniformly and free from sheaks and holes as per relevant clauses of section 800. In addition where arrows or letter are to be provided thermoplastic compound may be hard sprayed.Contractor had to use approved make of paints white and yellow colour complete all as specified and as directed.

Taking down cat eye, solar cat eye and tubular dealineator any type complete all as specified and directed.

Supply and fixing cat eye solar reflective type of metal body alloy of size 100mm x 100mm x 20mm with PAMA striplens reflector of model No. DA 972.0 fixed with and incl MS stud of suitable size as per manufactures instructions complete all as specified and directed.

Supply and fix solar cat eye aluminum alloy shall (100% water proofing design according to IP 65) of size 125mm x 125mm x 25mm (shank 65mm) of high efficiency Mono rystafie solar panel 2.4V/ 0.3 watt one NI-ed rechargeable battery (1.2V/ 1600MA) consisting of super bright LED with 10,000 to 18,000 mcd completed as per manufactures instructions etc. complete all as specified and directed

Scarifying or picking gravelled,macadam or bituminous macadam exc. 50 mm & n exc 100mm deep surfaces in area n. exc 400 sqm complete all as specified and as directed.

Material and labour for laying and compacting 75mm thick (compacted thickness) wet mix macadam (WMM) grading as per Table 400-13 of MoRTH specifications for road and Bridge works, 2013 manufactured in WMM plant, material comprising of clean, crushed graded aggregate and granular material premixed with water to a dense mass, spreading with sensor paver and rolling with vibratory roller of capacity 80-100 KN static weight and consolidating to required gradient and camber complete all as specified and as directed. The finished surface tolerances to be as per Table 900-1 of MoRTH specifications for Road and Bridge works, 2013.

Material and labour for preparing unsurfaced (WMM) surfaces by brushing with wire brushes for removing caked mud sweeping with brooms and finally fanning the cleaned surfaces with gunny bags to remove all loose dirt and applying evenly priming/tack coat with paving Bituminous primer (VG-10 Grade) at rate of 7.5 Kg per 10 Sqm complete all as specified and as directed. .

Material and labour for premix bituminous macadam using 4% paving bitumen of any penetration laid/ rolled and compacted to required gradient and camber (consolidated thickness 75mm or less) complete all as specified and as directed.