Govt.Secretariat Renovation works for the Office of the Deputy Secretary Scheduled Castes Scheduled Tribes and Backward Classes Department in Room no 395 first floor Main building Renovation works General Civil Work

Work Name:GENERAL-Govt.Secretariat: Renovation works for the Office of the Deputy Secretary,Scheduled Castes, Scheduled Tribes and Backward Classes Department in Room no: 395, first floor, Main building -Renovation works-General Civil Work

摡⁥硥汣摵湩⁧桴⁥潣瑳漠⁦散瑮牥湩⁧湡⁤桳瑵整楲杮ⴠ䄠汬眠牯灵琠汰湩桴氠癥汥ㄺ㈺㐺⠠散敭瑮㨠㈠挠慯獲⁥慳摮⠠潺敮䤭䥉搩牥癩摥映潲慮畴慲潳牵散⁳›‴牧摡摥猠潴敮愠杧敲慧整㈠‰浭渠浯湩污猠穩⁥搠牥癩摥映潲慮畴慲潳牵散⥳¤㘀ㄮㄮ䈺楲正眠牯楷桴挠浯潭畢湲⁴汣祡䘠倮匮⠠潮潭畤慬⥲戠楲正⁳景挠慬獳搠獥杩慮楴湯㜠㔮椠潦湵慤楴湯愠摮瀠楬瑮⁨湩䌺浥湥⁴潭瑲牡ㄠ㐺⠠‱散敭瑮㨠㐠挠慯獲⁥慳摮㜩
ㄱ㐮⸸㨲片畯楴杮琠敨樠楯瑮⁳景映潬牯湩⁧楴敬⁳慨楶杮樠楯瑮⁳景㌠洠楷瑤ⱨ甠楳杮攠潰祸朠潲瑵洠硩〠㜮‰杫漠⁦牯慧楮⁣潣瑡摥映汩敬⁲景搠獥物摥猠慨敤⠠⸰〱欠⁧景栠牡敤敮⁲湡⁤⸰〲欠⁧景爠獥湩瀠牥欠⥧‮湩汣摵湩⁧楦汬湩⁧术潲瑵湩⁧湡⁤楦楮桳湩⁧潣灭敬整愠⁳数⁲楤敲瑣潩景䔠杮湩敥⵲湩挭慨杲⹥楓敺漠⁦楔敬㘠〰㙸〰洠땭㈲㔮债潲楶楤杮愠摮氠祡湩⁧慷整⁲牰潯楦杮琠敲瑡敭瑮椠畳歮湥瀠牯楴湯漠⁦䍗ⱳ戠瑡牨潯瑥⹣‬祢愠灰祬湩⁧散敭瑮猠畬牲⁹業數⁤楷桴眠瑡牥瀠潲景湩⁧散敭瑮挠浯潰湵⁤潣獮獩楴杮漠⁦灡汰楹杮㨠愠 楆獲⁴慬敹⁲景猠畬牲⁹景挠浥湥⁴⁀⸰㠴‸杫猯浱洠硩摥眠瑩⁨慷整⁲牰潯楦杮挠浥湥⁴潣灭畯摮䀠〠㈮㌵欠⽧煳⹭吠楨⁳慬敹⁲楷汬戠⁥污潬敷⁤潴愠物挠牵⁥潦⁲‴潨牵⹳戠 敓潣摮氠祡牥漠⁦汳牵祲漠⁦散敭瑮䀠〠㈮㈴欠⁧猯浱洠硩摥眠瑩⁨慷整⁲牰潯楦杮挠浥湥⁴潣灭畯摮䀠〠ㄮ㘲欠⽧猠浱‮桔獩氠祡牥眠汩敢愠汬睯摥琠楡⁲畣敲映牯㐠栠畯獲映汯潬敷⁤楷桴眠瑡牥挠牵湩⁧潦⁲㠴栠畯獲‮桔⁥慲整椠据畬敤⁳牰灥牡瑡潩景猠牵慦散‬牴慥浴湥⁴湡⁤敳污湩⁧景愠汬樠楯瑮ⱳ挠牯敮獲‬番据楴湯⁳景瀠灩獥愠摮洠獡湯祲眠瑩⁨潰祬敭⁲業數⁤汳牵祲.ㄱ㐮⸷㨲牐癯摩湩⁧湡⁤慬楹杮嘠瑩楲楦摥琠汩獥椠楤晦牥湥⁴楳敺⁳琨楨正敮獳琠敢猠数楣楦摥戠⁹桴⁥慭畮慦瑣牵牥Ⱙ眠瑩⁨慷整⁲扡潳灲楴湯氠獥⁳桴湡〠〮┸愠摮挠湯潦浲湩⁧潴䤠⁓›㔱㈶ⰲ漠⁦灡牰癯摥戠慲摮☠洠湡晵捡畴敲Ⱳ湩愠汬挠汯畯獲愠摮猠慨敤‬湩猠楫瑲湩Ⱨ爠獩牥漠⁦瑳灥ⱳ氠楡⁤楷桴挠浥湥⁴慢敳⁤楨桧瀠汯浹牥洠摯晩敩⁤畱捩敳⁴楴敬愠桤獥癩⁥眨瑡牥戠獡摥 潣普牯業杮琠卉㨠ㄠ㐵㜷‬湩愠敶慲敧㘠洠桴捩湫獥ⱳ椠据畬楤杮朠潲瑵湩⁧景樠楯瑮⁳倨祡敭瑮映牯朠潲瑵湩⁧景樠楯瑮⁳潴戠⁥慭敤猠灥牡瑡汥⥹匮穩⁥景吠汩⁥〶砰〶‰浭ǰ㄀⸱㤴㈮债潲楶楤杮愠摮氠祡湩⁧楖牴晩敩⁤楴敬⁳湩映潬牯眠瑩⁨楤晦牥湥⁴楳敺⁳琨楨正敮獳琠敢猠数楣楦摥戠⁹桴⁥慭畮慦瑣牵牥Ⱙ眠瑩⁨慷整⁲扡潳灲楴湯氠獥⁳桴湡〠〮┸愠摮挠湯潦浲湩⁧潴䤠⁓›㔱㈶ⰲ漠⁦灡牰癯摥戠慲摮☠洠湡晵捡畴敲Ⱳ椠污潣潬牵⁳湡⁤桳摡ⱥ氠楡⁤楷桴挠浥湥⁴慢敳⁤楨桧瀠汯浹牥洠摯晩敩⁤畱捩敳⁴楴敬愠桤獥癩⁥眨瑡牥戠獡摥 潣普牯業杮琠卉㨠ㄠ㐵㜷‬湩愠敶慲敧㘠洠桴捩湫獥ⱳ椠据畬楤杮朠潲瑵湩⁧景樠楯瑮⁳倨祡敭瑮映牯朠潲瑵湩⁧景樠楯瑮⁳潴戠⁥慭敤猠灥牡瑡汥⥹匮穩⁥景吠汩獥㘠〰㙸〰洠࡭㜱㌮㈮债潲楶楤杮愠摮映硩湩⁧桷瑩⁥楶牴潥獵挠楨慮瀠摥獥慴祴数眠瑡牥挠潬敳⁴䔨牵灯慥祴数 楷桴猠慥⁴湡⁤楬Ɽㄠ‰楬牴⁥潬⁷敬敶桷瑩⁥楶牴潥獵挠楨慮映畬桳湩⁧楣瑳牥…⹃⹐映畬桳戠湥⁤楷桴映瑩楴杮⁳…⹃⹉戠慲正瑥ⱳ㐠‰浭映畬桳戠湥Ɽ漠敶晲潬⁷牡慲杮浥湥⁴楷桴猠数楣污⁳景猠慴摮牡⁤慭敫愠摮洠獯畱瑩牰潯⁦潣灵楬杮漠⁦灡牰癯摥洠湵捩灩污搠獥杩潣灭敬整‬湩汣摵湩⁧慰湩楴杮漠⁦楦瑴湩獧愠摮戠慲正瑥ⱳ挠瑵楴杮愠摮洠歡湩⁧潧摯琠敨眠污獬愠摮映潬牯⁳桷牥癥牥爠煥極敲⁤场挮‮慰楷桴䤠䥓洠牡敫⁤汢捡潳楬⁤汰獡楴⁣敳瑡愠摮氠摩攀捡ꕨ〵ㄮ⸷⸱㨱畓灰祬湩⁧湡⁤楦楸杮匠慴湩敬獳猠整汥猠慯⁰楤桳椠据畬楤杮挠獯⁴景洠瑡牥慩獬愠摮氠扡畯⁲档牡敧⁳瑥⁣潣灭敬整愠⁳数⁲桴⁥楤敲瑣潩景猠瑩⁥湅楧敮牥椭⵮档牡敧뤮〵ㄮ⸷⸱㨲畓灰祬湩⁧湡⁤楦楸杮䌠⁐潔敷潲⁤㔴浣漠⁲敮牡獥⁴癡楡慬汢⁥敬杮桴椠据畬楤杮挠獯⁴景洠瑡牥慩獬愠摮氠扡畯⁲档牡敧⁳瑥⁣潣灭敬整愠⁳数⁲桴⁥楤敲瑣潩景猠瑩⁥湅楧敮牥椭⵮档牡敧ꨮ〵

17.1.4:Supplying and fixing CP Health faucet good quality including cost of materials and labour charges etc. complete as per the direction of site engineer-in-charge.’18.53.1:Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS: 893115 mm nominal borek18.58.1.1:Providing and fixing PTMT grating of approved quality and colour. Circular type100 mm nominal dia@
17.7.2:Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require:White Vitreous China Wash basin size 630 x 450 mm with a single 15 mm C.P. brass pillar tapî17.32.3:Providing and fixing mirror of superior glass ( of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing :Oval shape 450x350 mm (outer dimensions)ž18.50.1:Providing and fixing C.P brass long nose bib cock of approved quality conforming to IS standards and weighing not less than 810 gms.15 mm nominal boreŽ18.52.1:Providing and fixing C.P brass stop cock ( concealed) of standard design and of approved make conforming to IS: 893115 mm nominal bore99.119:Providing and fixing factory made P.V.C. door frame of size 50x47 mm with a wall thickness of 5 mm, made out of extruded 5 mm rigid PVC foam sheet, mitred at corners and joined with 2 Nos. of 150 mm long brackets of 15x15 mm M.S. square tube, the vertical door frame profiles to be reinforced with 19x19 mm M.S. square tube of 19 gauge, EPDM rubber gasket weather seal to be provided through out the frame. The door fame to be fixed to the wall using M.S. screws of 65/100 mm size, complete as per manufacturer's specification and direction of Engineer-in Charge.metre‡9.120.1:Providing and fixing factory made panel PVC door shutter consisting of frame made out of M.S. tubes of 19 gauge thickness and sized of 19 mm x 19 mm for styles and 15x15 mm for top & bottom rails. M.S. frame shall have a coat of steel primers of approved make and manufacture. M.S. frame covered with 5 mm thick heat moulded PVC 'C' channel of size 30 mm thickness, 70 mm width out of whicj 50 mm shall be flat and 20 mm shall be tapered in 45 degree angle on both side forming styles and 5mm thick, 95 mm wide PVC sheet out of which75 mm shall be tapered in 45 degree on th inner side to form top and bottom rail and 115 mm wide PVC sheet out of which 75 mm shall be flat and 20 mm shall be tapered on both sides to form lock rail. Top, bottom and lock rails shall be provided both side of the panel. 10 mm (5 mmx2) thick, 20 mm wide cross PVC sheet be provided as gap insert for top rail & bottom rail. paneling of 5 mm thick both side PVC sheet to be fitted in the M.S. frame welded /sealed to the styles & rails with 7 mm (5 mm + 2 mm ) thick x 15 mm wide PVC sheet beading on inner side, and joined together with solvent cement adhesive. An additional 5 mm thick PVC strip of 20 mm width is to be stuck on the interior side of the 'C' Channel using PVC solvent adhesive etc. complete as per direction of Engineer -in-charge, manufacture's specification & drawing.30 mm thick plain PVC door shutters’OD164179/2025-2026:Providing and laying floor finish with superior quality polished imported wooden SP( Stone Plastic) Composite panel flooring, 1390mm x 120mm x9mm size of nearest size, SP composite panel of C4, or approved equivalent make it should have water resistance, abrasion resistance, impact resistance, fire resistance, slip resistance etc. , and the panel tongued and grooved in flooring after cleaning and levelling the surface thoroughly and fixing 3mm thick or nearest size polyurethane foam as per manufacturer & specification , including cutting the panel to the required size and fixing with silicon sealant for the edges and iron screws etc. complete including providing edge beading and skirting and finishing the top edge of the skirting as per the directions of the Engineer in charge, the rate includes cost and conveyance of all materials to site, labour charges etc complete.per sqm12.45.3:Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/ sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37 mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50 mm long with 6 mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long G.I. wire at every junction, including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre, with 25 mm long dry wall screws @ 230 mm interval, including fixing of gypsum board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5x25 mm at 230 mm c/c, including jointing and finishing to a flush finish of tapered and square edges of the board with recommended jointing compound, jointing tapes, finishing with jointing compound in 3 layers covering upto 150 mm on both sides of joint and two coats of primer suitable for board, all as per manufacturer's specification and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed, all complete as per drawings, specification and direction of the Engineer in Charge but excluding the cost of painting with:12.5 mm thick tapered edge gypsum moisture resistant boardõOD164183/2025-2026:Providing and fixing Plain multipurpose cement board (High Pressure steam cures) as per IS:14862,with suitable screws for fibre cement board in partition etc. complete (frame work to be paid seperately) 8mm thick cement board.¤21.1.1.1:Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS : 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminnium snap beading for glazing /paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge.(Glazing, paneling and dash fasteners to be paid for separately): For fixed portionAnodised aluminium (anodised transparent or dyed to required shade according to IS : 1868, Minimum anodic coating of grade AC 15)kgŠOD164181/2025-2026:Plywood paneling(12 mm) : Providing and fixing paneling using plywood,12 mm thick plywood (BWP 710 Grade ) to be fixed.3
OD164176/2025-2026:Mica panelling : providing and fixing premium quality (Royal,greenlam,Merini or eqnt)mica 1mm thick on to the existing plywood using adhesive complete as perthe direction engineer in charge including all the cost of accessories, labour charges etc. complete(data based on 9.126.1 of DAR))
9.127.1:Providing & Fixing decorative high pressure laminated sheet of plain / wood grain in gloss/ matt/suede finish with high density protective surface layer and reverse side of adhesive bonding quality conforming to IS: 2046 Types S, including cost of adhesive of approved quality.1.