SPECIAL REPAIR TO BUILDING OF SUB STATION NO 4, 6, 7, 17, 6A AND 1 AT NORTH ZONE AND BUILDING NO TAN-03 AND NP-27 UNDER GE (NORTH) BINNAGURI

Amount

Taking down chowkats or frame exc 1.5 Sqm but n.exe 4 Sqm each without taking off shutters from the frame including Builders Hardware complete all as specified and as directed.

Taking down frame n.exc 1.5 Sqm each without taking off shutters from the frame including Builders Hardware complete all as specified and as directed.

S&F of pressed steel framed for door with one or more rebates including necessary supply and fixing lugs, hinges, lock strike plates, size of frame 105 X 60 mm including one shop coat of primer complete all as specified and as directed.

S&F of factory made solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with 19x19mm MS square tube and 1.2mm wall thickness complete all as specified and as directed.

S&F of factory made 30mm flush shutter, solid core construction, with block board core and plywood face panels, commercial type on both side etc complete all as specified and as directed.

S&F factory made solid PVC moulded door shutter, 28 to 30mm thick (stiles), with 2, 4 or 6 raised panel design with 2mm thick moulded PVC sheet on the front face & 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification with wood free EPS complete all as specified and as directed.

S&F of stainless steel butt hinges, medium weight cold rolled of size 100mm complete all as specified and as directed.

S&F of aluminium handles cast type anodised 150mm of size complete all as specified and as directed.

S&F 150 mm long aluminium anodised barrel tower bolts of extruded section and fixed complete all as specified and as directed.

S&F of 200 mm long aluminium anodised barrel tower bolt of extruded section complete all as specified and as directed.

S&F aluminium (die cast body) door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 Kg and fixed complete all as specified and as directed.

S&F in repair aluminium alloy anodised sliding door bolt 250 mm long with hasp & staple (bolt type) and fixing clips of sheet cast or extruded section and fixing bolts and sliding bolts of extruded section complete all as specified and as directed.

M&L for mild steel framed work such as in grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290. Gde-E-165 complete all as specified and as directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and as directed.

M&L framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete all as specified and as directed.

M&L for preparation of new or previously untreated steel and Iron surface of any description, not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over one coat of red oxide primer complete all as specified and as directed.

M&L for preparation of new primer applied steel and Iron surface of any description, not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint complete all as specified and as directed.

M&L for preparation of new or previously undecorated wooden surface of any description, not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over one coat of Pink primer complete all as specified and as directed.

M&L for PCC type C-1, 1:3:6 using 20mm graded stone aggregate as in bed block for fixing of hold fast, filling concrete in frame filling, gaps in between glazed & fly proof steel window, cills, railing up to 60 cm in height etc including necessary form work as required complete all as specified and as directed.

Demolition of brickwork built in cement mortar including all quions, arches, pillars etc complete all as specified and as directed.

M&L for brick work with fly ash bricks straight or curved on plan exc 6m mean radius built in cement mortar 1:6 complete all as specified and as directed.

M&L for brickwork with fly ash bricks, straight or curved on plan to any radius in half brick thick walls, built in cement mortar 1:6 complete all as specified and as directed.

Taking down cement plaster on wall of any description including racking out joints, hacking for key, scrubbing down with water etc complete all as specified and as directed.

M&L for 20 mm thick plaster of cement mortar (1:4) rendering on fair faces of brick work in two layers (10mm +10mm) mixed with water proofing compound in top layer 200 ml per beg of cement or as per manufacturer's instructions finishing the surface fair and even without using extra cement complete all as specified and as directed.

M&L for rendering 5 mm thick cement plaster on ceiling cement mortar (1:3) finishing the surface even & fair without using extra cement complete all as specified and as directed.

M&L for rendering 15 mm thick cement plaster on other than fair surfaces of brick work in cement mortar (1:6) complete all as specified and as directed.

Supply only liquid water proofing compound complete all as specified and as directed.

Material & Labour for distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour complete, as per manufacturer's specification. Applying two or more coats on new plastered surface over 2 mm wall care putty complete all as specified and as directed.

M&L for preparation of newly plastered surfaces of wall by vacuum based sanding machine, applying wall care putty (multipurpose mixture shall be used for uniform and proper mixing of putty) and applying two coat of exterior acrylic emulsion paint on external surface of wall/chajja/facias by auto roller over a coat of exterior primer complete all as specified and as directed.

M&L for one coat of white wash on old surface of wall with brooming down or steel wire brushing; scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots complete all as specified and as directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed.

M&L for non skid ceramic digital coloured floor tiles 7 to 8mm thick (Square/rectangular) area of each tile exceeding 0.11 Sqm but n. exc. 0.18 Sqm, in floors etc. set and jointed in neat cement slurry over 15mm thick screed bed or bedding layer in CM (1:6) as in floor and point in whiter or coloured cement to match as in floor tiles complete all as specified and as directed.

M&L for Vitrified Ceramic tiles dark shade/double charged/ultra charged 7-8 mm thick (square/ rectangular) polished, area of each tiles exceeding 0.36 sqm but not exceeding 0.42 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match surfaces of tiles and using 15 mm thick using cement mortar 1:6 complete all as specified and as directed.

M&L for glazed ceramic digital elevation coloured tiles in vertical surface 450x350x6-7mm/300x600x6-7mm thick set and jointed in neat cement slurry and pointed white or colour cement to match the surface of tiles and using 15 mm thick using cement mortar 1:4 complete all as specified and as directed.

M&L for 75 mm thick cement concrete 1:3:6 type C-2 (using 40 mm graded stone aggregate) as in path /steps laid with and including use and waste of form work and finishing the surface even and rough to receive the topping layer or tiling complete all as specified and as directed.

M&L for providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footpath, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand complete all as specified and as directed.

Demolition of cement concrete (un-reinforced) in ground floors and pavings n.exc 15 cm thickness (below or above ground level) complete all as specified and as directed.

Taking up or down steel tubing and connections, including cleaning for refixing or removal to store of 15 mm bore complete all as specified and as directed.

S&F of tubes, medium grade, 15mm bore, galvanised, with all fittings and fixed complete to wall and ceilings or laid in floors complete all as specified and as directed.

Refixing of old steel tubing and connections in new or old position (wall, ceiling, floors, etc) of 15 mm bore complete all as specified and as directed. Note: The serviceable steel tubing obtained from taking down shall be reused.

Cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels etc., and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exceeding 10 cm girth in brick walls complete all as specified and as directed.

Taking up or down steel tubing and connections, including cleaning for refixing or removal to store of 20 mm bore complete all as specified and as directed.

S&F of Tubes, medium grade, 20 mm bore, galvanised, with all fittings and fixed complete to wall and ceilings or laid in floors complete all as specified and as directed.

Refixing old steel tubing and connections in new or old position (walls, ceiling, floors, etc) complete all as specified and as directed. Note: The serviceable steel tubing obtained from taking down shall be reused.

Dismantling water tank exc 500 & n.exc 1000 ltr capacity and removing to store complete all as specified and as directed.

S&F 500 ltrs capacity rotational moulded polythelene water storage tank multilayer (cylindrical vertical with closed top) hoisted and fixed in positions all specified in SSR Part-I complete all as specified and as directed.

S&F in repairs of ball valves of 20mm bore high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe & fixed (Minimum weight 20 gms-210 gms) complete all as specified and as directed.

S&F in repairs 15 mm dia Bib tap fancy type chromium plated, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and as directed.

S&F in repairs 15 mm bore fancy type bib taps long body (two in one) cast copper alloy 15 mm bore with fancy chromium plated screwed down, screwed for iron pipe or for brass ferrule complete all as specified and as directed.

S&F in repairs 15 mm bore fancy type concealed stop cock (regular body) cast copper alloy screwed down, high pressure, with crutch or butter fly handle, screwed both ends for iron pipe or for unions complete all as specified and as directed.

S&F in repairs of chromium plated over head shower roses with or without swivel joints, any size, including fixing to steel pipe or union complete all as specified and as directed.

S&F PVC (SWR) multi floor trap 75MM/100mm , plain with grating including jointing with solvent cement as in repair complete all as specified and as directed.

S&F wash basin, vitreous china, white flat back of size 550mm x 400 mm x 140 mm or nearest size conforming to model ‘CALBURT’ Cat No.S2020103 of CERA or techno commercially equivalent model in other makes as listed in list of Makes as approved by the GE with and including CI brackets (embedded in wall upto 110 mm depth with and including cement concrete M15 (Nominal mix) using 20 mm nominal size graded crushed stone aggregate or fixing on wall with and including rawl plug and screws), 32 mm nominal size, copper alloy, nickel chromium plated finish waste fittings, including painting of fittings and brackets, sealing gap between wall and table top basin with silicone sealant, cutting and making good the walls wherever required and connecting to supply pipes, waste pipes, waste fittings etc. with silicone sealant complete all as specified and as directed.

S&F in repair 15mm bore pillar taps swan neck cast copper alloy, with capstan heads, chromium plated, screwed down, fancy high pressure, with or without lettered ‘HOT or COLD’ with long screwed sunk and fly nuts complete all as specified and as directed.

S&F in repairs vitreous china wash down water closet pedestal pattern white excluding fixing bolts, flushing cistern and flush pipe complete but including PVC seat cover with aluminium/PVC hinging devices etc complete all as specified and as directed.

S&F in repair 10 ltr capacity low level symphonic type white plastic twin flushing cistern conforming to model ‘COMPASS’ Cat No B1020106 of CERA or techno commercially equivalent model in other makes as listed in List of Makes as approved by the GE as per IS 7231:1994 with inlet, ball valve, float and handle including brackets and 40 mm nominal dia high density polyethylene pipes for flush pipe complete all as specified and as directed.

S&F in repair vitreous china urinal, half stall type, white (including all fittings and fixture i.e. CP waste coupling, CP urinal spreader, PVC waste pipe etc) complete all as specified and as directed.

S&F in repair 15 mm bore fancy type angular stop cock cast copper alloy screwed down, high pressure with crutch or butter fly handle screwed both ends for iron pipe or for unions complete all as specified and as directed.

S&F brass chromium plated tubular towel rail 20mm dia of D type 60 cm long between flange complete all as specified and as directed.

S&F stainless steel towel ring as in repair including Chromium plated brass screws and wooden / plastic cleats complete all as specified and as directed.

S&F stainless steel Soap dish of approximate size 125 mm complete all as specified and as directed.

S&F in repair CP health faucet (ABS body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 m long flexible tube and ABS wall hook in cluding making connections and fixed in position complete all as specified and as directed.

M&L for granite (of any type) tiles 18-20mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing and screed bed or backing in cement mortar complete all as specified and as directed.

Taking down PVC/AC pipe of any dia & any description including all fittings complete all as specified and as directed.

S&F 110mm dia PVC SWR pipes single socketed in any length with rubber ring joints, fixed to wall complete all as specified and as directed.

S&F 110mm dia PVC SWR bends of any radius with out access door complete all as specified and as directed.

S&F in repair 110mm dia PVC (SWR) junction single 'T' equal or unequal with access door complete all as specified and as directed.

S&F in repair 110mm dia PVC (SWR) branch piece, single ‘Y‘ equal or unequal complete all as specified and as directed.

Dismantling of Plain or corrugated ,steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified and as directed.

S&F pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed.

S&F pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour aving tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed.

S&F powder coated anodized aluminium door made out of hollow extruded aluminium sections as mentioned below. Each door having 02 Nos disk or D type handles of 200mm long, 02 Nos aluminium tower bolt of 200mm size, 1 no mortice lock of six levers with key in duplicate regulated by double action hydraulic floor door spring (Make Sandhu /Titz) or equivalent as approved by the GE shutter to be patrly glazed with 5mm thick tinned glass and partly paneled with 12mm thick prelaminated particle board fixed with glazing clips rubber beading /gasket anodized aluminium beading screws complete including taking down old unserviceable shutter with frame and the sectioins are as under:- (a) Chowkat frame : 100 x44 x1.60 mm (b) Shutter vertical style : 100 x44 x1.60 mm (c) Shutter lock rail : 150 x44 x1.60 mm (d) Shutter Top rail : 100 x44 x1.60 mm (e) Shutter bottom rail : 200 x44 x1.60 mm

S&F Powder coated aluminium window sliding type three track (2 glazed & one gauzed shutter ) aluminium sections weighing not less than 1.2kg/m for frame and 0.55 kg/m for shutter including necessary jointing cleats, glazing cleats, rubber packing , screws, handle, locking arrangement and 5.5mm thick plain/tinted glass and aluminium mosquito proof gauge including taking down of old existing steel window and making good disturbed surfaces of wall complete all as specified and as directed.

S&F Powder coated aluminium louvered ventilators of size n exc 0.50 Sqm area with glass louvers, without sash bars of aluminium sections weighing not less than 0.605kg/m for frame of size 40x20x2mm including necessary jointing cleats, glazing cleats, rubber packing , anodised aluminium snap beading, screws, anodised aluminium fittings and 5.5mm thick tinted glass fixed in panels with suitable locking arrangements including taking down of old existing steel ventilator and making good disturbed surfaces of wall complete all as specified and as directed.

Dismantling of Wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/blankets, any thickness, including cover fillets complete all as specified and as directed.

S&F GI frame work for seamless ceiling comprising of FI perimeter channel 0.55 mm thick with two unequal flange of 20 and 30 mm dia and Web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre / intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended form soffit at approx 900 mm centre to centre with FI cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 mm length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre. Hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceiling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete all as specified and as directed.

M&L for 4mm thick non asbestos fibre cement building boards fixed or laid/ inserted to timber/GI/Aluminium framework with screws complete all as specified and as directed.

S&F 150 mm long mild steel pressed handles, oval type, stove enameled black complete all as specified and as directed.

S&F 150 mm long mild steel barrel tower bolts, stove enameled black, with bright bolt complete all as specified and as directed.

S&F Mild steel sliding door bolts, 250 mm long, plate type, stove enameled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed complete all as specified and as directed.

S&F in repair steel ventilator top hung shutter including hinges, steel peg stay, fixing lugs etc complete with or without glazing bars complete all as specified and as directed and also shown in drawing No SZ/TD/219/99, Sheet No 1/2 & 2/2.

Hacking out old broken unserviceable glass panes (any thickness, size, quality or description) for metal frame including punching or drilling out old glazing pins/spring clips and providing & fixing new one complete all as specified and as directed.

S&F of 3 mm thick sheet glass, ordinary quality and glazing with oil putty in square n.exc 0.5 sqm in each pane complete all as specified and as directed.

M&L for brick work with fly ash bricks straight or curved on plan exc 6m mean radius built in CM 1:6 except bricks complete all as specified and as directed. Note: The serviceable bricks obtained from demolition shall be reused.

M&L for preparation of newly wall plastered surfaces and applying three coats of white wash on wall to match the existing colour complete all as specified and as directed.

M&L for preparation of newly ceiling plastered surfaces and applying three coats of white wash on wall complete all as specified and as directed.

M&L for preparation of newly wall plastered surfaces and applying three coats of colour wash on wall to match the existing colour complete all as specified and as directed.

M&L for preparation of old decorative surface of wall and applying two coats of colour wash to match the colour of existing surface complete all as specified and as directed.

M&L for washing, rubbing down and scraping of old decorated surface and preparation of old ceiling plastered surfaces for applying two coats of white wash on wall complete all as specified and as directed.

M&L for washing, rubbing down and scraping of old decorated surface and preparation of old wall plastered surfaces for applying two coats of white wash on wall complete all as specified and as directed.

M&L for preparation of old surfaces of wall and applying one coat of exterior acrylic emulsion paint on external surface of wall/chajja/facias complete all as specified and as directed.

M&L for 20 mm thick screed bed or bedding layer of cement mortar 1:6 for floor finishes complete all as specified and as directed.

M&L for Machine cut kota stone slab flooring 15-20mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and as directed.

All as per item No 94 above but as in skerting and riser of steps complete all as specified and as directed.

M&L for rendering 10 mm thick on fair faces of brick work or concrete surfaces to receive a wall tiles using cement mortar 1:4 complete all as specified and as directed.

M&L for 75 mm thick cement concrete 1:3:6 type C-2 using 40mm graded stone aggregate in plinth protection finished fair and even without using extra cement including forming necessary joints 12 mm wide to the full depth of PCC at every 3 meters and every change of direction and filling the same with & including bitumen and sand 1:3 by weight of grade 'A' complete with and including necessary form work etc complete all as specified and as directed.

M&L for 100 mm thick Cement concrete 1:4:8 type D2 (using 40 mm graded stone aggregate) as in sub base, in foundations, filling and mass concrete complete all as specified and as directed.

M&L for Cement concrete1:3:6 type C2 (using 40 mm graded stone aggregate) as in channel and drain bed complete all as specified and as directed.

M&L for Cement concrete 25 mm thick 1:2:4 type B1 (using 20 mm graded stone aggregate) as in floor complete all as specified and as directed.

Demolition of RCC Drain cover of any description and in any position not otherwise specifically provided for complete all as specified and as directed.

S&F factory made pre-cast RCC drain/channel cover slab without frame, size 500x600x70 mm, set in cement mortar (1:4) including reinforcement, MS strip etc complete all as specified and as directed. Note : Reinforcement shall not be measured and paid separately.

S&F of Rolled mild steel in channel, angle, or tee sections, fixed independently, without connecting plates, etc. (cut to ordinary lengths i.e. within 20mm of the length indicated) conforming to Fe-290 Gde E-165 complete all as specified and as directed.

Excavating in trenches, n.exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n.exc 10 sq m on plan and n exc 1.5 m in depth and getting out from loose/soft soil complete all as specified and as directed.

M&L for cement concrete 1:3:6 type C1 with using 20 mm graded stone aggregate as in filling post holes complete all as specified and as directed.

M&L for Rolled Mild Steel in post, Joist, channel, angle, tube, square or tee sections, fixed independently, without connecting plates, etc of grade Fe-410W, (Gde E-250) quality A complete all as specified and as directed.

M&L for Rolled Mild Steel in roof trusses (framed), trussed, purlins, rafter, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats, plate etc of grade Fe-410W (Grade E-250) quality A complete all as specified and as directed.

Dismantling of timber scantlings as in fillets, rails, posts, rafters, purlins, etc. under 40 sq. cm in section complete all as specified and as directed.

S&F steel rolling shutters, 1.25 mm thick with out ball bearing, as specified including top cover, anchoring rod, hasp and staple and one shop coat of primer; erected in position as indicated, complete push pull or manual type complete all as specified and as directed.

Taking down tar felt with cement plaster from roof surfaces and lowering and removing the same to a distance exc. 50m and n. exc 100m including roughening of old concrete surface of roof by wire brushing and cleaning the surface to remove all loose dust etc complete all as specified and as directed.

M&L for 10mm thick screed bed or bedding layers in cement mortar (1:4) in order to maintain proper slope over existing roof surfaces for laying APP base polymeric membrane, finished even and smooth without using extra cement complete all as specified and as directed.

M&L for providing, cement concrete type B1 1:2:4 using 20 mm graded stone aggregate as in roof kerbs or mud stops, rounded or chamfered on edges complete all as specified and as directed.

M&L for waterproofing Coating with polyurethane based water proofing liquid membrane of approved make to be applied by brush with multi coats with minimum dry film thickness of 1mm and shall be cured by reaction with atmospheric moisture to give a tough elastomeric waterproof membrane complete all as specified and as directed. Note: The above treatment will be carried out by authorised applicator of approved firm/company.

Demolition of cement concrete (un-reinforced ) in ground floors and pavings n.exc 15 cm thickness (below or above ground level) all as specified and as directed.

M&L for PCC 1:2:4 type B-I, (using 20 mm graded stone aggregate) as in coping /benching to sides of foot path fininished fair and even etc complete all as specified and as directed.

M&L for 25mm thick pre-polished and chemically treated smooth finish exterior grade coloured chequered tiles as in path complete all as specified and as directed.

M&L for providing and laying factory made kerb stone of M-25 grade of size 300x300x100 cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), complete all as specified and as directed.

M&L for paving tiles of size 300x300x10 mm set, jointed and pointed in neat cement slurry over in pavement/footpath/floors over including 15 mm thick screed bed or bedding layer in CM (1:6) complete all as specified and as directed.

Dismantling posts or struts (wood, steel or R.C.C.) any section, including taking out embedded portion and making good disturbed ground for complete all as specified and as directed.

Dismantling structural steel work including doors, gates but excluding framed truss etc complete all as specified and as directed.

M&L for brick work with fly ash bricks as in channel, straight or curved on plan exc 6m mean radius built in cement mortar 1:4 complete all as specified and as directed.

All as per item No 121 above, but except bricks complete all as specified and as directed. Note: The serviceable bricks obtained from demolition shall be reused.

Supply & fix precast RCC fencing posts with (1:1.5:3 )concrete Type A1 (Using 20mm graded stone aggregate) sectional area exceeding 100 cm but not exceeding 250 cm with or without chamfered angles and flat, splayed, rounded or mitred tops complete all as specified and as directed. Notes: (a) The rate quoted shall be inclusive of form work. (b) Reinforcement will be measured and paid separately.

M&L for TMT bars 5mm to 10mm dia, cut to length bent to shape required in stirrups spacers and binders and binding with mild steel wire (annealed) not less than 0.9mm dia or securing with clips quality confirming to Fe-410 S or Fe-410-Ocomplete all as specified and as directed.

M&L for TMT Bars 10 mm dia and over cut to length, bent to shape required, including cranking, bending spirally for hooping for colums, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia, or securing with clips complete all as specified and as directed.

Dismantling of barbed wire fencing or any type and size complete all as specified and as directed.

S&F galvanized. 2 strand, steel barbed wire 2.24 mm dia barbed with 2mm dia barbs at 75mm spacing and galvanized coating of steel wire shall confirm to the requirement as laid down for medium coated wire in IS 4826 and straining and fixing to any type of standard rails staining bolts, including securing or tying at crossings with and provision of galvanized mild steel pins etc complete all as specified and as directed.

Fixing only old barbed wire by restraining & resecuring including making good staples etc complete all as specified and as directed.

M&L for Mild steel screw bolts 12mm dia (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, length of bolt exc 15cm and n.exc 22.50cm long complete all as specified and as directed.

Supply only chain link MS galvanized fencing of dia 3 to 4 mm, 75x75/50x50mm mesh size, any type complete all as specified and as directed

Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provision of binding wire complete all as specified and as directed.

M &L for posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165 complete all as specified and as directed.

M&L for cement concrete type C1 1:3:6 with using 20 mm graded stone aggregate as in filling post holes complete all as specified and as directed.

M & L for 18 to 20 mm thick granite (of any type) work (table rubbed and polished) in steps, Jambs, pillars, window cills, cooking platforms, corner shelf, Flat shelf and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite and including 15 mm thick cement plaster (1:4) including rounding the exposed surfaces of granite complete all as specified and as directed.

Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc for taking credit ( credit for above items should be made separately) and making good disturbed surfaces of walls, floors, etc complete all as specified and as directed.

M&L for point wiring complete for one power point for one metal plug & socket on independent board with 4.0 Sqmm multistranded copper conductor single core PVC insulated unsheathed FR-LS cable 1100 volts grade with proper colour coding drawn through and including non-metallic rigid PVC medium grade conduit not less that 20mm dia and conduit accessories concealed in wall/fixed to roof, ceiling etc including provision of 4.0 Sqmm PVC insulated multistranded unsheathed copper conductor cable FR-LS as earth continuity conductor connected to common earth dolly, including cutting chases of existing wall for conduits and fixing for Metal Plug and socket boxes and making good to the disturbed surface of wall/floor and matching with existing specifications. Connections of cable with MCBs or bus bar shall be done through proper size copper/brass thimbles complete all as specified and as directed.

M&L for point wiring complete with 1.5 Sqmm single core PVC insulated unsheathed FR-LS cable 1100 volts grade with multistranded copper conductor with proper colour coding drawn through and including non-metallic rigid PVC medium grade conduit and conduit accessories concealed in wall/fixed to roof, ceiling etc including provision of 1.5 Sqmm PVC insulated multistranded unsheated copper conductor cable FR-LS with proper colour coding as earth continuity conductor connected to common earth dolly, modular sheet steel sunken terminal box of appropriate size suitable for modular switch/ fittings concealed in walls, with modular back plate, top cover fixed flush to wall for housing switches, socket outlets, fan regulators etc duly earthed including cutting chases of existing wall for conduits and sinking for boxes and making good to the disturbed surface of wall/floor and matching with existing specifications. Connections of cable with MCB's or bus bar shall be done through proper size copper/brass thimbles complete all as specified and as directed for the following:-

One light point controlled by one way switch 5/6 amps complete all as specified and as directed

One ceiling fan/Exhaust fan point controlled by one way switch 5/6 amps complete all as specified and as directed

One socket out let 5/6 amps point on the same board complete all as specified and as directed

One socket out let 5/6 amps point on the independent board complete all as specified and as directed

One bell point controlled by one way switch 5/6 Amps complete all as specified and as directed

S&F switch piano single pole flush type 5 Amps, 230 volts one way complete all as specified and directed.

S&F bell push fush type 5 Amp 230 Volts complete all as specified and directed.

S&F socket 2 in 1, 5 Pin, 5/6 amps, white ivory finish flash type complete all as specified and directed.

S&F Switch socket combination 2 and 3 Pin, 5/6 amps, multipurpose flush non shutter, non inter locking type white ivory finish with, complete all as specified and as directed.

S&F ceiling rose, bakelite, surface type, 220/240 volts, three terminals complete all as specified and as directed.

S&F in deluxe fan Electronic regulator 120/280 volts AC 50 Hzs rotary step white/ivory finish complete all as specified and as directed

S&F lamp holder, insulated body, with back plate suitable for batten/angle fittings complete all as specified and as directed

S&F LED white glass Lamp 1x9 Watt 230V Base-22 complete all as specified and as directed

S&F of Modular switch, single pole, one way, 6 Amp, 1 Module, 230 volt, ISI marked complete all as specified and as directed.

S&F of Modular switch, single pole, one way, 16 Amp, 1 Module, 230 volt, ISI marked complete all as specified and as directed.

S&F of Modular shuttered Socket outlet 5 Pin, 6 Amp, 2 Module, 230 volts, ISI marked complete all as specified and as directed.

S&F of Modular shuttered Socket outlet 6 Pin, 6/16 Amp, 2 Module, 230 volts, (ISI marked) complete all as specified and as directed.

S&F of Modular bell push, one way, 6 Amp, 1 Module, 230 volt, ISI marked complete all as specified and as directed.

S&F of stepped type modular electronic fan regulator 120 watt 2 module suitable for 1200/1400 mm sweep energy saving fans, ISI marked complete all as specified and as directed.

S&F IP 20, class I, LED light 1X18 W (or nearest next higher wattage) (4feet), 5700K, wall/ surface mounted, integrated type with aluminium housing and decorative and caps with integrated high efficiency electronic driver and surge suppressor of 2KV or more, luminaire efficiency > 95 lumens/watt, power factor > 0.90, operating range - 140 to 270 V, 50 Hz complete with all accessories internally prewired and connecting up with and including necessary taking down the old unserviceable fitting complete all as specified and as directed

S&F recess mounting flat panel 34 Watt LED fitting (2'X2') for armstrong/ grid ceiling, white powder coated CRCA housing complete with full window acrylic diffuser & electronic driver, high brightness SMD LEDs etc complete with all accessories internally prewired and necessary mounting arrangements, including necessary connection and taking down old unserviceable one complete all as specified and as directed

S&F energy saving new generation environmental friendly long life versatile pressure die cast aluminium IP 66 security light fitting luminaire with high power LEDs as light source and electronic driver of capacity 25 watts with pre wired and necessary mounting arrangements, provision of new 3 core multistranded copper conductor of size 23/0.193 from ceiling rose to fitting and GI pipe bracket made out of GI pipe medium grade 32 mm dia 1.5 mtr long bend to required shape complete including removal of old unsv fitting complete all as specified and as directed

S&F MCB distribution boards (DBs) with sheet metal enclosure, double door, IP 43 protection, 240 Volts, 8 way, single pole and neutral, with 200 Amps rated copper bus bar (as per OEM), neutral link, earth link earthing studs, suitable for fixing MCBs, without MCBs fixed flush to wall/other surface including taking down old unserviceable one complete all as specified and as directed.

S&F MCB, single pole & neutral, 32 to 63 amps, 240 volts, ‘C’ curve, 10KA all complete with and including taking down old unsv one complete all as specified and as directed.

S&F MCB, single pole, 5 to 32 amps, 240 volts, ‘C’ curve, 10 KA all complete with and including taking down old unsv one complete all as specified and as directed

Material and labour for earthing complete with galvanized steel plate electrodes of size600x600x6mm thick buried directly in ground with earth pit not less than 2.25 meter deep below normal ground level with top edge of plate not less than 1.5 meter below normal ground level connected to galvanised iron strip25 x 4 mm earth lead by means of nuts, bolts, check nuts and washers including 15 mm bore galvanized iron pipe, medium grade for protection of earth lead upto the length of 7.5 meter towards test terminal and 20 mm bore galvanized iron pipe, medium grade for watering, and providing of charcoal and common salt in alternate layers, including necessary earth work in any type of soil and including PCC pit in PCC 1:2:4 with provision of wire mesh and funnel, complete all as shown in electrical plate No 5 of SSR Part- I including testing on complete all as specified and as directed

Taking down carefully ceiling fan from its original position and refixing / hanging in same position after B/R plaster work complete all as specified and as directed

M&L painting of ceiling fan complete, in situ with synthetic enamel paint by spraying including filling cavities with filler one coat after cleaning all dust etc complete all as specified and as directed.

Taking down carefully exhaust fan from its original position and refixing it after making serviceable condition to the same position after B/R plaster work complete all as specified and as directed.

S & F Post top lanterns 20 watt LED light fitting ,new generation, energy saving, environmental friendly, long life with symmetrical light distribution, spun aluminium landscape luminaries with high power LEDs as light source, spun aluminium canopy, with opal/clear acrylic diffuser and complete with all accessories internally prewired including connecting up with three core twisted flexible copper conductor cable up to ceiling rose and necessary mounting arrangements complete all as specified and as directed

S&F epoxy powder coated sheet metal enclosure with socket plug top and MCB, single pole and neutral enclosure with a two pin and earth plug and socket complete with one double pole MCB 20 Amps, 240 Volts, C Series current carrying capacity 10 KA, including necessary connection complete all as specified and as directed.

M&L for concealed conduit point wiring with 1.5 Sqmm (nominal cross-sectional area) PVC insulated unsheathed single core copper cable working voltage 1100 volts grade conforming to IS-694 with stranded copper conductor in and including PVC conduit of adequate size with all accessories (including cutting chases & making good the disturbed surface to its original specification) including MS sunk box, 3mm thick hylum sheet top cover fixed by means of brass machine screw and cap washer including size 1.5 sq mm (nominal cross sectional area) PVC insulated unsheathed single core multistranded copper conductor cable as earth continuity conductor connected to main switches/DB's or common earth dolly for one light point controlled by one, one way switch complete all as specified and as directed for the following:-

All as per item No 164 here in before but for one exhaust fan point controlled by one, one way switch complete all as specified and as directed

All as per item No 164 here in before but using 2.5 Sqmm single core copper conductor cable of multistranded flame retardant PVC insulated unsheathed 1100 volts grade for 5/15 amps switch socket combination point including running of 2.5 sq mm copper conductor flame retardant PVC wire as earth continuity conductor along with wiring and connecting to the common earth dolly complete all as specified and as directed.

All as per item No 164 here in before but using 4.0 Sqmm single core copper conductor cable of multistranded flame retardant PVC insulated unsheathed 1100 volts grade for plug and socket point including running of 4.0 sq mm copper conductor flame retardant PVC wire as earth continuity conductor along with wiring and connecting to the common earth dolly complete all as specified and as directed

S&F of socket outlet 2 in 1, 5 Pin 5/15 Amp multipurpose 230 volt flush type complete all as specified and as directed.

S&F of Bulk head luminaries with B22 base holder suitable for 9 Watt LED inverter type bulb light IP66 grade, with and including 9 watt LED (or nearest next higher wattage) lamp (LED Bulb with B22 base 900 Lumens in normal mode and 450 lumens in power back up mode, charging time 8-10 Hrs and around 4 Hrs Power backup with inbuilt surge protection of 3 KV) (or nearest next higher wattage) and connecting up with and including PVC insulated 3 core of size 0.75 Sqmm copper conductor from ceiling rose to terminal block of light fitting including necessary taking down the old unserviceable fitting complete all as specified and as directed.

M&L for sub main wiring with 2 run of 6.00 sqmm (nominal cross-sectional area) PVC insulated unsheathed single core FRLS cable of working voltage 1100 volts grade with stranded copper conductor including one run of 6.00 Sqmm (nominal cross sectional area) PVC insulated unsheathed cable with stranded copper conductor as continuous earth wire connected to common earth dolly drawn in steel conduit of suitable dia metallic concealed conduit with and including taking down unsv sub main, complete all as specified and as directed. Note : Two runs of sub main wiring cable along with one run of earth wire with and including steel conduit pipe shall be measured as one unit length.

M&L for fixing louver of exhaust fan of existing size including removal of old unserviceable one complete all as specified and as directed.

S&F multifunctional digital type timer Switch 240 volts AC Single Phase complete with and including taking down old unserviceable one complete all as specified and as directed.

S&F single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB, 20 Amps, 240 Volts, including necessary connection complete all as specified and as directed including taking down old one.

Supply and fixing porcelain insulator of size 65x31 mm and height 30mm with three nos hole including GI bolts and nuts of required size and two nos washer on including PCC block, fixing strip complete all as specified and as directed.

Dismantling of existing loose/disturbed Aluminum strip/GI Strip/Termination rod of any sizes on roof/down conductor fixed on wooden guities /directly on roof including screws etc complete all as specified and as directed.

Re-fixing of serviceable item obtained from dismantling on roof/down conductor fixed on wooden guities/porcelain insulator /directly on roof including screws etc complete all as specified and as directed. Note: The serviceable item obtained from dismantling shall be reused.

Supply and fixing aluminium strip of size 25x3.15 mm for earth continuity conductor fixed on PCC block complete all as specified as directed complete all as specified and as directed.

Supply and fixing air termination single pointed aluminium rod 12mm dia and 300 mm long complete all as specified and as directed.

Supply and fixing in repair for earth continuity conductor or main earthing lead fixed to wall on batten or recess or chases or buried in ground or drawn in conduit/pipe or fixed to poles or any other indicated situation for loop earthing etc. as required for 32 mm x 6 mm thick, galvanised iron strip using porcelain clit /post insulators complete all as specified and as directed.

Material and labour for earthing with galvanised earth plate electrode 600 mm x 600 mm x 6 mm thick, buried directly in ground vertically to a depth of not less than 2.25 mtr below ground level connected to galvanised iron strip 32 mm x 6 mm by means of nut, bolts and washers made out of galvanised iron mild steel and 40 mm dia GI pipe "light grade" for protection of earth lead and connected to control board or as directed including earthing pit in PCC (1:3:6) type C-1, pre-cast reinforced cover with MS XPM Jalli, RCC 1:1.5:3 cover slab of size 300 x 300 x 100 mm with one handle made out of 8 mm dia round bar 20 mm dia GI pipe Medium grade for watering funnels , wire mesh and provided charcoal or coke of alternative layers of 15 cm including necessary earth work complete shown in electrical plated No 3 and testing complete all as specified and as directed.

Material and labour for earthing with galvanised earth plate electrode 600 mm x 600 mm x 6 mm thick, buried directly in ground vertically to a depth of not less than 2.25 mtr below ground level connected to galvanised iron GI Wire 4mm dia, by means of nut, bolts and washers made out of galvanised iron mild steel and 25 mm dia GI pipe "light grade" for protection of earth lead and connected to control board or as directed including earthing pit in PCC (1:3:6) type C-1, pre-cast reinforced cover with MS XPM Jalli, RCC 1:1.5:3 cover slab of size 300 mm x 300 mm x 100 mm thick, with one handle made out of 8 mm dia round bar 20 mm dia GI pipe Medium grade for watering funnels, wire mesh and provided charcoal or coke of alternative layers of 15 cm including necessary earth work complete shown in electrical plated No 3 and testing complete all as specified and as directed.

BIG BEN ENTERPRISES

M/s. MD IRSHAD

S. G. CONSTRUCTION

M/S SINHA ENTERPRISE

L. B. SHARMA