Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹24.1 LAccepted-AOC INDEX NO E 53 CWE BHUJ OPP SHRI HALARI BHANUSHALI WADI OUTSIDE KHAMBHALIYA GATE NR PAVAN CHAKKI JAMNAGAR 361005 | JAMNAGAR | JAMNAGAR | GUJARAT | 361005 | ₹24.1 L Quoted ₹26.2 L | L1 | Accepted-AOC L1 AND REASONABLE |
| 2 | L2₹31.1 LRejected-Finance INS VALSURA JAMNAGAR | JAMNAGAR | GUJARAT | 360520 | ₹31.1 L | L2 | Rejected-Finance NOT L1 |
| 3 | L3₹34.8 LRejected-Finance PARTH B 203 PATEL COLONY STREET NO 11 ROAD NO 3 JAMNAGAR 361 006 GUJARAT | JAMNAGAR | GUJARAT | 361006 | ₹34.8 L | L3 | Rejected-Finance NOT L1 |
| 4 | L4₹35.8 LRejected-Finance 58 MODERN MARKET NEAR AMBER CINEMA JAMNAGAR | JAMNAGAR | ₹35.8 L | L4 | Rejected-Finance NOT L1 |
| 5 | L5₹37.6 LRejected-Finance | ₹37.6 L | L5 | Rejected-Finance NOT L1 |
| Sl No | Description | Qty | Unit | M/s Rohit Construction Co. L8 | fakhrie apostrical L4 | SIBS CONTRACTOR L5 | M/s Jagdish Machinery Stores L2 | Rameshwar Enterprise L6 | M/s Balaji Enterprise L3 | Shah Associates L1 | Pooja Enterprise L7 |
|---|---|---|---|---|---|---|---|---|---|---|---|
| 1.00 | Disconnecting the electric induction motor 3 phase, capacity of 20-30 HP, separating pumping set and electric motor, dismantling the elelctric motor for separating the stater and rotor and carring out to work shop for following repairs and after repairs re-assembling with making necessary electrical connection, jointing/ coupling with pump set also making alignment and testing complete for smooth functioning complete all as specified and as directed by Engr-in-charge. | 5 | Each Job | 1,200 ₹6,000 | 1,050 ₹5,250 | 950 ₹4,750 | 800 ₹4,000 | 900 ₹4,500 | 905 ₹4,525 | 700 ₹3,500 | 1,000 ₹5,000 |
| 1.01 | (a) Cutting out the burnt winding of all the three phases of stator, taking out burnt copper wire from the slots cleaning the slots properly, rewinding the three phases with original gauge, super enameled copper winding wire including insulating materials i.e., varnish, cotton tape, insulating paper, sleeves drying the windings to require temperature, reassembling the rotor and stator after cleaning and dusting of rotor to remove the settled dust particles complete all as directed by Engr-in-charge.(Note: Spare parts will be measured and paid separately under item ) | 4 | Each Job | 16,500 ₹66,000 | 16,000 ₹64,000 | 13,000 ₹52,000 | 13,000 ₹52,000 | 15,000 ₹60,000 | 14,100 ₹56,400 | 16,000 ₹64,000 | 14,580 ₹58,320 |
| 1.02 | (b) M & L for replacement of ball bearings of size DE/NDE -6310-2RS all as specified & directed by Engr-in-charge. | 6 | Each | 2,500 ₹15,000 | 2,356 ₹14,136 | 2,300 ₹13,800 | 2,000 ₹12,000 | 2,500 ₹15,000 | 2,520 ₹15,120 | 1,500 ₹9,000 | 3,000 ₹18,000 |
| 1.03 | (c ) M&L for bearing housing as per existing size and sample all as directed by Engr-in-charge. | 6 | Each | 2,000 ₹12,000 | 1,654 ₹9,924 | 1,200 ₹7,200 | 1,000 ₹6,000 | 1,500 ₹9,000 | 1,520 ₹9,120 | 500 ₹3,000 | 1,800 ₹10,800 |
| 1.04 | (d) M&L for shafting and turnning at lathe of motor shaft as per existing size and sample all as directed by Engr-in-charge. | 3 | Each | 1,800 ₹5,400 | 1,648 ₹4,944 | 1,500 ₹4,500 | 1,200 ₹3,600 | 1,800 ₹5,400 | 1,520 ₹4,560 | 700 ₹2,100 | 1,500 ₹4,500 |
| 2.00 | Disconnecting the electric induction motor 3 phase, capacity of 40 HP, separating pumping set and electric motor, dismantling the elelctric motor for separating the stator and rotor and carring out the following repairs and after repairs re-assembling with making necessary electric connection, jointing/ coupling with pumping set, making alignment and testing complete for smooth functioning complete all as specified and as directed by Engr-in-charge.. | 1 | Each Job | 2,500 ₹2,500 | 2,356 ₹2,356 | 3,500 ₹3,500 | 1,300 ₹1,300 | 3,250 ₹3,250 | 2,100 ₹2,100 | 800 ₹800 | 3,250 ₹3,250 |
| 2.01 | (a) M & L Cutting out the burnt winding of all the three phases of stator, taking out burnt copper wire from the slots cleaning the slots properly, rewinding the three phases with original gauge, super enameled copper winding wire including insulating materials i.e., varnish, cotton tape, insulating paper, sleeves drying the windings to require temperature, reassembling the rotor and stator after cleaning and dusting of rotor to remove the settled dust particles complete all as directed by Engr-in-charge (Note: Spare parts will be measured and paid separately under item ) | 1 | Each Job | 27,000 ₹27,000 | 26,548 ₹26,548 | 24,000 ₹24,000 | 18,000 ₹18,000 | 25,000 ₹25,000 | 26,000 ₹26,000 | 22,000 ₹22,000 | 28,000 ₹28,000 |
| 2.02 | (b) M & L for replacement of ball bearings of size DE/NDF-6312- 2RS all as specified & directed by Engr-in-charge. | 2 | Each | 2,000 ₹4,000 | 2,356 ₹4,712 | 1,350 ₹2,700 | 2,000 ₹4,000 | 1,500 ₹3,000 | 2,020 ₹4,040 | 2,000 ₹4,000 | 1,800 ₹3,600 |
| 2.03 | (c ) M&L for bearing housing as per existing size and sample all as directed by Engr-in-charge. | 2 | Each | 2,800 ₹5,600 | 2,445 ₹4,890 | 3,000 ₹6,000 | 1,500 ₹3,000 | 2,900 ₹5,800 | 2,520 ₹5,040 | 800 ₹1,600 | 2,500 ₹5,000 |
| 2.04 | (d) M&L for shafting and turnning at lathe of motor shaft as per existing size and sample all as directed by Engr-in-charge. | 1 | Each | 2,200 ₹2,200 | 2,000 ₹2,000 | 2,500 ₹2,500 | 1,300 ₹1,300 | 2,400 ₹2,400 | 1,925 ₹1,925 | 1,100 ₹1,100 | 2,600 ₹2,600 |
Updated dates
Tender Value
₹28 L
EMD Value
₹56,000
Closing Date
11 Apr 2026, 6:00 pmClosed
GE (A) JAMNAGAR
INFANTRY LINE
REPAIR AND MAINT OF CENTRIFUGAL PUMPSETS, ELECTRICAL MOTORS, SUBMERSIBLE PUMP SETS AND ELECTRICAL PANEL OF ELECTRICAL MOTORS INSTALLED AT WATER SUPPLY INSTALLATIONS AND OTHER CONNECTED ALLIED WORKS UNDER GARRISON ENGINEER (ARMY) JAMNAGAR AT INF LINE
2026_MES_756300_1
8216
Open Tender
Civil Works - Water Works
180 days
JAMNAGAR
AS PER TENDER DOCUMENTS
6 documents required · 6 mandatory
₹500
GE ARMY JAMNAGAR
₹56,000
30 May 2026
14 Mar 2026
13 Apr 2026
15 Mar 2026
11 Apr 2026
28 Mar 2026
Disconnecting the electric induction motor 3 phase, capacity of 20-30 HP, separating pumping set and electric motor, dismantling the elelctric motor for separating the stater and rotor and carring out to work shop for following repairs and after repairs re-assembling with making necessary electrical connection, jointing/ coupling with pump set also making alignment and testing complete for smooth functioning complete all as specified and as directed by Engr-in-charge.
(a) Cutting out the burnt winding of all the three phases of stator, taking out burnt copper wire from the slots cleaning the slots properly, rewinding the three phases with original gauge, super enameled copper winding wire including insulating materials i.e., varnish, cotton tape, insulating paper, sleeves drying the windings to require temperature, reassembling the rotor and stator after cleaning and dusting of rotor to remove the settled dust particles complete all as directed by Engr-in-charge.(Note: Spare parts will be measured and paid separately under item )
(b) M & L for replacement of ball bearings of size DE/NDE -6310-2RS all as specified & directed by Engr-in-charge.
(c ) M&L for bearing housing as per existing size and sample all as directed by Engr-in-charge.
(d) M&L for shafting and turnning at lathe of motor shaft as per existing size and sample all as directed by Engr-in-charge.
Disconnecting the electric induction motor 3 phase, capacity of 40 HP, separating pumping set and electric motor, dismantling the elelctric motor for separating the stator and rotor and carring out the following repairs and after repairs re-assembling with making necessary electric connection, jointing/ coupling with pumping set, making alignment and testing complete for smooth functioning complete all as specified and as directed by Engr-in-charge..
(a) M & L Cutting out the burnt winding of all the three phases of stator, taking out burnt copper wire from the slots cleaning the slots properly, rewinding the three phases with original gauge, super enameled copper winding wire including insulating materials i.e., varnish, cotton tape, insulating paper, sleeves drying the windings to require temperature, reassembling the rotor and stator after cleaning and dusting of rotor to remove the settled dust particles complete all as directed by Engr-in-charge (Note: Spare parts will be measured and paid separately under item )
(b) M & L for replacement of ball bearings of size DE/NDF-6312- 2RS all as specified & directed by Engr-in-charge.
(c ) M&L for bearing housing as per existing size and sample all as directed by Engr-in-charge.
(d) M&L for shafting and turnning at lathe of motor shaft as per existing size and sample all as directed by Engr-in-charge.
Disconnecting the electric induction motor 3 phase, capacity of 60 HP, separating pumping set and electric motor, dismantling the elelctric motor for separating the stator and rotor and carring out the following repairs and after repairs re-assembling with making necessary electric connection, jointing/ coupling with pumping set, making alignment and testing complete for smooth functioning complete all as specified and as directed by Engr-in-charge.
(a) Cutting out the burnt winding of all the three phases of stator, taking out burnt copper wire from the slots cleaning the slots properly, rewinding the three phases with original gauge, super enameled copper winding wire including insulating materials i.e., varnish, cotton tape, insulating paper, sleeves drying the windings to require temperature, reassembling the rotor and stator after cleaning and dusting of rotor to remove the settled dust particles complete all as directed by Engr-in-charge.(Note: Spare parts will be measured and paid separately under item)
(b) M & L for replacement of ball bearings of size DE-6313/6314 all as specified & directed by Engr-in-charge.
(c ) M&L for bearing housing as per existing size and sample all as directed by Engr-in-charge.
(d) M&L for shafting and turnning at lathe of motor shaft as per existing size and sample all as directed by Engr-in-charge.
Disconnecting the electric induction motor 3 phase, capacity of 100 HP, separating pumping set and electric motor, dismantling the elelctric motor for separating the stator and rotor and carring out the following repairs and after repairs re-assembling with making necessary electric connection, jointing /coupling with pumping set, making alignment and testing complete for smooth functioning complete all as specified and as directed by Engr-in-charge..
(a) Cutting out the burnt winding of all the three phases of stator, taking out burnt copper wire from the slots cleaning the slots properly, rewinding the three phases with original gauge, supper enameled copper winding wire including insulating materials i.e., varnish, cotton tape, insulating paper, sleeves drying the windings to require temperature, reassembling the rotor and stator after cleaning and dusting of rotor to remove the settled dust particles all as directed by Engr-in-charge.(Note: Spare parts will be measured and paid separately under item
(b) M & L for replacement of ball bearings of size DE/NDE 6318-C3 all as specified & directed by Engr-In-Charge
(c) M&L for bearing housing as per existing size and sample all as specified & directed by Engr-In-Charge
(d) M&L for shafting and turnning at lathe of motor shaft as per existing size and sample all as directed by Engr-in-charge.
Disconnecting the unserviceable singal/ Double stage centrifugal pumping set, 100 HP dismantling the same for overhauling, repairing and replacing the unserviceable parts including installing, commisioning for proper alignment and smooth functioning, making connection in suction and delivery side with necessary packing, nut bolts etc complete all as specified and as directed by Engr-in-charge. (Note: Spare parts will be measured and paid separately)
(a) Supply and fix cast iron impeller with key for pumping set as per existing
(b) Supply and fix cast iron impeller neck ring
(c) Supply and fix cast iron impeller metal bush
(d) Supply and fix Pump shaft made of steel as per existing
(e) Supply and fix Double roller ball bearing of size 3309
(f) Supply and fix Double roller ball bearing of size 6309
(g) Supply and fix steel bush with nut for pump shaft
(h) Supply and fix bearing housing
(j) Supply and fix rubber 'O' ring as per sample
(k) Supply and fix CI coupling for pumping set including pin and bush type with coupling bolt and key complete in all repect duly machined grooved for key way & key for lock
(l) Supply and fix CI iron gland flange with stud as per exisitng type complete
(m) Remetalling of pump shaft turning on lathe to standard size cutting grooves key ways threads for check nuts etc complete with grinding and polishing complete all as required and directed by Engr-in-charge.
(n) Supply and fix of spider star rubber coupling with alignment of pump and motor complete as specified and directed by Engr- in- charge
Disconnecting the unserviceable single stage centrifugal pumping set, 60 HP dismantling the same for overhauling, repairing and replacing the unserviceable parts including installing, commisioning for proper alignment and smooth functioning, making connection suction and delivery side with necessary packing, nut bolts etc complete all as specified and as directed by Engr-in-charge. (Note: Spare parts will be measured and paid separately)
(a) Supply and fix cast iron impeller with key for pumping set as per existing
(b) Supply and fix cast iron impeller neck ring
( c) Supply and fix cast iron impeller metal bush
(d) Supply and fix pump shaft made of steel as per existing
(e) Supply and fix double roller ball bearing of size 6308
(f) Supply and fix double roller ball bearing of size 6309
(g) Supply and fix steel bush with nut for pump shaft
(h) Supply and fix bearing housing
(j) Supply and fix rubber 'O' ring as per sample
(k) Supply and fix coupling for pumping set pin and bush type with coupling bolt, and key complete in all repect duly machined grooved for key way & key
(l) Supply and fix CI iron gland flange with stud as per exisitng type complete.
(m) Remetalling of pump shaft turning on lathe to standard size cutting grooves key ways threads for check nuts etc complete with grinding and polishing all as required and directed by Engr-in-charge.
(n) Supply and fix of spider star rubber coupling with alignment of pump and motor complete all as specified and directed.
Disconnecting the unserviceable centrifugal pumping set, split casing single stage of capacity 20 HP to 40 HP any make dismantling the same for overhauling, repairing and replacing the unserviceable parts including installing, commisioning for proper alignment and smooth functioning, making connection in suction and delivery side with necessary packing, nut bolts etc ccomplete all as specified and as directed by Engr-in-charge.. (Note: Spare parts will be measured and paid separately).
(a) Supply and fix cast iron impeller with key for pumping set as per existing
(b) Supply and fix cast iron impeller neck ring
(c) Supply and fix cast iron impeller metal bush
(d) Supply and fix pump shaft made of steel as per existing
(e) Supply and fix double roller ball bearing of size 6308
(f) Supply and fix steel bush with nut for pump shaft
(g) Supply and fix bearing housing
(h) Supply and fix rubber 'O' ring as per sample
(j) Supply and fix coupling for pumping set pin and bush type with coupling bolt, and key complete in all repect duly machined grooved for key way & key
(k) Supply and fix CI iron gland flange with stud as per exisitng type complete.
(l) Remetalling of pump shaft turning on lathe to standard size cutting grooves key ways threads for check nuts etc complete with grinding and polishing all as required and directed by Engr-in-charge.
(m) Supply and fix of spider star rubber coupling with alignment of pump and motor complete all as specified and directed.
M&L for painting to MS Channels, foundation, MS pipe/CI pipe suction and delivery pipes of pumpsets upto 5 m including cleaning the surfaces of any description and in any position and applying TWO coat of synthetic enamel paint of approved colour code complete all as specified and as directed by Engr- in- Charge
S & F for CI foot valve flange type completeas per IS 4038 including packing materials, nut bolts etc suitable for followin dia of suction line including removal of old unsv one complete as specified and directed by Engr- in- charge
(a) 200 mm dia
(b) 150 mm dia
(c) 80 mm dia
S&F for Gland rope of size 8 mm and 10 mm dia for centrifugal pump set of any capacity including removal of old unsv one complete all as specified and as directed by Engr-in-charge.
S&F for Nut & bolt,stud etc for different sizes of pump set of capacity 40 HP to 100 HP including removal of old unsv one complete all as specified and as directed by Engr-in-Charge.
S&F of Grease for bearng of pump set complete all as specified and as directed by Engr-in-charge.
S&F for fan blade of induction motor complete all as per existing size/ pattern for 40.0 HP to 100.0 HP motor including removal of old unsv one complete all as specified and as directed by Engr-in-charge..
S&F for Induction Motor terminal connection plate (six terminal) made of heavy duty backlite hylem sheet with copper studs with bolts washers complete all as per existing size/ pattern for15.0 HP to 30.0 HP motor including removal old unsv one complete all as specified and as directed by Engr-in-charge..
S & F for Electeical induction Motor terminal connection plate (six terminal) made of heavy duty hylem sheets with copper nut and bolts washers all as per existing size/pattern for 30.0 HP to 100.0 HP motor including removal of old unsv one complete all as specified and as directed by Engr-in-charge..
S&F for brass Air release cock for Pumpsets as as per exiting size and sample including removal of old unsv one complete all as specified and as directed by Engr-in-charge.
S & F for copper pipe with nut for cooling of gland rope of pump set as per exiting size and sample including removal of old unsv one complete all as specified and as directed by Engr-in-charge.
M & L for Leather sheet with nut and bolts complete for CI foot valve and CI NRV of any size installed to suction & delivary pipe of pump sets including removal of old unsv one complete all as specified and as directed by Engr-in-charge.
M & L for attending the emergent complaints for unserviceable/ break down/ fault of water supply pump sets of any capacity including carrying out minor repairs in electrical supply system in control panel and motor terminals etc after finding the fault as required to make the pump set in order to functional complete all as specified and as directed by Engr-in-charge. Note : (i) Rate inclusive for minor items like fuse wire, copper cable etc (ii) Major items like starter, contractor etc will be paid separately in respective items.
M & L for disconnet the electric cable from panel and taking out the unserviceable/ burnt out submersible pump set from the bore with the help of chain pully and tripard of following capacity and transporting to work shop after seperating Pump & Motor for carrying out rewinding the motor with same gauge and same no of turns of with water proof PVC insulated copper wire of existing guage and size to achieve the specified/ required RPM including taking out old unserviceable winding wire, cleaning/ repairing damaged slots and also carryout the repairs to pump by unsv parts like replacement of impellers, bearings, thrust bearings, gun metal bushes and NRV as per existings of pump and testing completion to the motor and for smooth function with reassembling submersiible pump & moter set and relowering in to Bore well with the help of the chain pully and tripard incluing lowering of exsting serviceable MS/GI/ HDPE column pipe of any size complete all as specified and as directed of the following capacites :-
(a) Submersible Pump set of capacity 20.0 HP to 30.0 HP
(b) Submersible Pump set of capacity 10.0 HP to 15.0 HP
(c) Submersible Pump set of capacity 5.0 HP to 7.5 HP
(d) Submersible Pump set of capacity 1.50 HP to 2.50 HP Note : Replacement of defective parts will be measured and paid separately
Supply and fix for following defective parts of submersible motor of capacity 20.0 HP to 30.0 HP of make : KSB/Calama / Crompton Greaves/ Winson
(a) Labour only Turning & polishing of pump set shaft of submersible motor
(b) Bearing bush gun metal
(c) SS impellers
(d) Bearing Housing
(e) Oil Seal.
(f) Brass thrust plate
(g) CI Thrust bearing
(h) CI Thrust casing
(j) Stainless steel sand guard
(k) CI connecting piece at drive end
(l) CI lower housing for resting of shaft
(m) CI upper housing for resting of shaft
Supply and fix for following defective parts of submersible pump of 10.0 HP to 15.0 HP capacity :-
(a) CI stage casing
(b) Stainless steel sand guard
(c) Stainless Steel sleeve at staging
(d) SS impellers
(e) Neck ring brass
(f) Key for impellers
(g) SS stud with nuts of size of 3/8" X 2" for stage casing
(h) Bush gun metal at intermediate section
(j) Stainless steel sleeve at intermediate section
(l) Labour only Turning & polishing of pump set shaft of submersible motor of capacity 10 to 15 HP
(m) CI Thrust bearing
Supply and fix for following defective parts of submersible pump of 5.0 HP to 7.50 HP capacity :-
(a) CI stage casing
(b) Stainless steel sand guard
(c) Stainless Steel sleeve at staging
(d) SS impellers
(e) Neck ring brass
(f) Key for impellers
(g) SS stud with nuts of size of 3/8" X 2" for stage casing
(h) Bush gun metal at intermediate section
(j) Stainless steel sleeve at intermediate section
(l) Labour only Turning & polishing of pump set shaft of submersible motor of capacity 5 to 7.50 HP
(m) CI Thrust bearing
Supply and fix for following defective parts of submersible pump of 1.50 HP to 2.50 HP capacity :-
(a) CI stage casing
(b) Stainless steel sand guard
(c) Stainless Steel sleeve at staging
(d) SS impellers
(e) Neck ring brass
(f) Key for impellers
(g) Bush gun metal at intermediate section
(h) Labour only Turning & polishing of pump set shaft of submersible motor of capacity 1.5 to 2.5 HP
(j) CI Thrust bearing
S & F for stainless steel coupling & key common for submersible pump and motor shaft including removal of old unsv one complete all as specified and as directed by Engr-in-charge.
S & F for MS clamp made out of flat iron 50 X 6 mm to hold the submersible pumping set alongwith motor safely as per existing pattern and as approved including removal of old unsv one complete all as specified and as directed by Engr-in-charge.
S & F for MS bore cap made out 6 mm thick MS plate with suitable size nut bolts for following size casing pipe including removal of old unsv one complete all as specified and as directed by Engr-in-charge.
(a) 100 mm bore
(b) 150 mm to 200 mm bore
Supply and fix lowering the submerssible copper conductor mutistraned cable of following sizes with necessary electrical connections from Motor to starter including removal of old unsv one complete all as specified. Make: Finolex / Paragon / Plaza
(a) 3 core x 2.5 Sqmm
(b) 3 core 6 Sqmm .
(c) 3 core 10 Sqmm
Supply & fix for DOL starter (confiriming to IS 13947-4) ,230 volts 50 Hz single phase for electric motor of capacity upto 2 HP including removal of old unsv one complete all as specified and as directed. Make : L&T, Simems, ABB
Supply & fix DOL starter (confiriming to IS 13947-4), 415 volts 50 Hz 3 phase for electric motor of capacity upto 3 HP including removal of old unsv one complete all as specified and as directed. Make : L&T, Simems, ABB
Supply & fix for DOL starter (confiriming to IS 13947-4), 415 volts 50 Hz 3 phase for electric motor of capacity upto 5 HP including removal of old unsv one complete all as specified and as directed. Make : L&T, Simems, ABB
M& L for Mild steel Base plate made out of stractural steel i.e MS channel heavy duty as per manufacture design and proper aligment including and necessary cutting, welding as required suitable for pump set as per existing base plate as conforming to Fe.290, Gde-E-165,and connection with nut and bolts, painting with two coats of synthatic enamel black colour paint over a coat Zinc red oxide to the base plate including removal of old unsv one complete all as specified and directed by Engr-in-Charge.
M&L for PCC foundation for Pump of any capacity including dismantling the existing cracked foundation and providing new foundation using PCC 1:2:4, B-1 and fixing of new MS base frame of pump set including necessary foundation bolts for mounting the frame complete with demolition of old unsv PCC foudation all as specified and directed by Engr-in-Charge.
S & F Heavy duty green hose pipe of size 100mm internal dia with working pressure 7 kg/cm complete all as specified and directed by Engr-in-Charge.
Supply and fix 'KOS+' SERIES, 2 POLE, OPENWELL SUBMERSIBLE PUMPS, 3 HP AT RATED VOLTAGE 380V, 50 Hz FREQUENCY, THREE PHASE A.C. POWER SUPPLY complete with suitable starter panel complete including taking down old unserviceable pump and deposit in MES store yard all as specified and directed by engineer in charge.
S&F TOTALLY ENCLOSED FAN COOLED SQUIRREL CAGE CRANE DUTY IE2 MOTORS 2 HP 4 Pole / 1500 RPM suitable for Gear motor for Alum dozing with PROTECTION : IP55 VOLTAGE : 415 VOLTS ± 10% RATING : S3/S4 (AS PER IEC 60034)FREQUENCY: 50 Hz ± 5% DUTY : INTERMITTENT COMBINED :10% (ABSOLUTE SUM) INSULATION : CLASS F, TEMP RISE - CLASS B AMBIENT : 50 °C 40% CDF, 150 Starts stops per Hr Applicable Standards : IS/IEC 60034-30-1, IS 12615 : 2018; IS1231, IS2223 complete with suitable control starter panel including taking down old unserviceable pump and deposit in MES store yardall as specified and as directed by engineer incharge
M & L for repair and serving to gear box system coupled with motor mounted on common base plate frame for alum Dozer and lime dozer assembly including functional of paddle and scapper assembly system and making its functional including replacement, refilling of gear oil and any other warn out patrs like bearing as per requirement fitted at Water trearment Plant No 1 & 2 complete as specified and directed by Engr- in- charge
M & L for Paddle assembly and scrapper assembly, alum dozer assbly made out of MS sheet , MS angle iron , MS 'U' channel support, clamps and back plates fabricated from structural steel sections including bolts, nuts, washers, welding, bending cold any shape sizes as indicated or drilled or directed suitable for existin design or manufacturer design and painted with one primer coat, one under coat and one finishing coat with super enamelled paint including removal of old existing unserviceable one complete as specified and directed by Engr- in- charge
M & L for disconnect the electric cable from panel, and replaced the following worn out part in FASD starter, Panel etc and lugs and connecting copper wire all as directed by Engr-in-Charge :-
(a) Contractor for 7.5 HP to 10 HP capacity starter
(b) Contractor for 15 HP to 20 HP capacity starter
(c) Contractor for 25 HP capacity starter
(d) Contractor for 40 HP capacity starter
(e) Contractor for 60 HP capacity starter
(g) Contractor for 100 HP capacity starter
(h) Thermal Over Load Relay for 7.5 HP to10 HP capacity starter
(j) Thermal Over Load Relay for 15 HP to 20 HP capacity starter
(k) Thermal Over Load Relay for 25 HP capacity starter
(l) Thermal Over Load Relay for 40 HP capacity starter
(m) Thermal Over Load Relay for 60 HP capacity starter
(o) Thermal Over Load Relay for 100 HP capacity starter
(p) Electronic Timer for starter
(q) Single phase preventor
(s) LED Indicating lamps R,Y,B
(t) Push button for ON/OFF for pump motours
Please Enable Macros to View BoQ information
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.22 MB
8216tender.pdf
Tender Documents • 1.32 MB
BOQ_847161.xls
BOQ • 0.39 MB
Download all tender documents and submit your bid
