GE AF/AMB-05/2020-21 REPAIRS / MAINTENANCE OF ELECTRICAL WIRING, DISTRIBUTION BOARDS AND ALLIED ITEMS IN MARRIED AND OTM ACCOMMODATIONS IN DOMESTIC AREA AT AF STATION AMBALA UNDER GE AF AMBALA

Amount

Taking down copper / aluminium point wiring (light, fan, socket or power) including fixture and fittings viz. switches, ceiling roses, light fittings, pendants, regulators, sockets, etc. and disposing off complete all as specified and as directed

M&L for point wiring with 1.5sqmm, single core, FRLS PVC insulated, ISI marked, unsheathed cable 1100volts grade with multi-stranded copper conductor, drawn through and including non-metallic rigid PVC conduit not less than 20mm dia and conduit accessories concealed on walls, ceiling etc., and including provision of 1.5sqmm copper wire, green colour as earth continuity conductor and connected to common earth dolly, including cutting chases for conduit and sinking for box and making good to the surface to match the existing and MS sheet (1.6mm thick) sunken box or pressed steel terminal boxes with provision of 3mm thick plastic laminated sheet top cover complete all as specified and as directed for the following:

One light / ceiling fan / exhaust fan point controlled by one 6A one way switch

One switch socket combination outlet 3 pin 6Amps on independent board

One switch socket comination outlet 3 pin 5Amps on same board

One bell point controlled by one bell push

M&L for point wiring with 2 runs of 2.5sqmm, single core PVC FRLS insulated, heavy duty, ISI marked, unsheathed cable 1100volts grade with multistranded copper conductor drawn through and including non-metallic rigid PVC conduit not less than 20mm dia and conduit accessories, concealed in walls / roofs / floors / ceiling etc. and PVC insulated heavy duty, ISI marked, unsheathed copper conductor 1.5sqmm for earth continuity conductor and connected to common earth dolly including cutting chases for conduit and sinking for box and making good to the surface to match the existing and MS sheet (1.6mm thick) sunken box or pressed steel terminal boxes with provision of 3mm thick plastic laminated sheet top cover for 3 pin 15/16Amps switch socket combination outlet on independent board complete all as specified and as directed

M&L for point wiring with 2 runs of 4sqmm, single core, FRLS PVC insulated, ISI marked, unsheathed cable 1100volts grade with multi-stranded copper conductor, drawn through and including non-metallic rigid PVC conduit not less than 20mm dia and conduit accessories concealed on walls / roofs / floors / ceiling etc. and including provision of 2.5sqmm copper wire, green colour as earth continuity conductor and connected to common earth dolly, including cutting chases for conduit and sinking for box and making good to the surface to match the existing and MS sunken box or pressed steel terminal boxes with provision of 3mm thick plastic laminated sheet top cover complete all as specified and as directed

M&L for point wiring with 1.5sqmm, single core, FRLS PVC insulated, ISI marked, unsheathed cable 1100volts grade with multi-stranded copper conductor, drawn through existing non-metallic rigid PVC conduit concealed on walls, ceiling etc., and including provision of 1.5sqmm copper wire, green colour as earth continuity conductor and connected to common earth dolly and drawing out and disposing off old damaged existing cables complete all as specified and as directed for the following:

One light / ceiling fan / exhaust fan point controlled by one 6A one way switch

One switch socket outlet 3 pin 6Amps on independent board

One switch socket outlet 3 pin 5Amps on same board

M&L for point wiring with 2 runs of 2.5sqmm, single core PVC FRLS insulated, heavy duty, ISI marked, unsheathed cable 1100volts grade with multistranded copper conductor drawn through existing non-metallic rigid PVC conduit not less than 20mm dia and conduit accessories, surface on walls / roofs / floors / ceiling etc. and PVC insulated heavy duty, ISI marked, unsheathed copper conductor 1.5sqmm for earth continuity conductor and connected to common earth dolly for 3 pin 15/16Amps switch socket combination outlet on independent board and disposing off old damaged existing cables complete all as specified and as directed

M&L for point wiring with 1.5sqmm, single core, FRLS PVC insulated, ISI marked, unsheathed cable 1100volts grade with multi-stranded copper conductor, drawn through and including non-metallic rigid PVC casing capping not less than 20mm wide and accessories surface on walls, ceiling etc., and including provision of 1.5sqmm copper wire, green colour as earth continuity conductor and connected to common earth dolly with MS sheet (1.6mm thick) sunken box or pressed steel terminal boxes with provision of 3mm thick plastic laminated sheet top cover complete all as specified and as directed for the following:

One light / ceiling fan / exhaust fan point controlled by one 6A one way switch

One switch socket combination outlet 3 pin 6Amps on independent board

One switch socket comination outlet 3 pin 5Amps on same board

M&L for point wiring with 2 runs of 2.5sqmm, single core PVC FRLS insulated, heavy duty, ISI marked, unsheathed cable 1100volts grade with multistranded copper conductor drawn through and including non-metallic rigid PVC casing capping not less than 20mm wide and accessories, surface on walls / roofs / floors / ceiling etc. and PVC insulated heavy duty, ISI marked, unsheathed copper conductor 1.5sqmm for earth continuity conductor and connected to common earth dolly for 3 pin 15/16Amps switch socket combination outlet on independent board complete all as specified and as directed

S&F in repairs switch piano flush modular type, single pole, ISI marked, one way 5amps, 230V complete all as specified and as directed

S&F in repairs switch piano flush modular type, single pole, ISI marked, one way 15amps, 230V complete all as specified and as directed

S&F in repairs socket outlet, 3 pin, multipurpose 6amps modular flush type, ISI marked, 230V complete all as specified and as directed

S&F in repairs socket outlet, multi-purpose, 3 pin, 16Amps, and 1 pin 6Amps, modular flush type, ISI marked, 230V controlled by one switch complete all as specified and as directed

S&F in repairs electronic fan regulator, stepped modular type (5 steps), 120W, 2 module, 50Hz, 230V, ISI marked with cover plate duly connected up complete all as specified and as directed

S&F in repairs electronic fan regulator, stepped modular type (5 steps), 120W, 1 module, 50Hz, 230V, ISI marked with cover plate duly connected up complete all as specified and as directed

S&F in repairs electronic fan regulator, stepped type (5 steps), 100W, 50Hz, 230V, ISI marked duly connected up complete all as specified and as directed

S&F in repairs modular white cover plate with frame ISI marked complete all as specified and as directed suitable for the following sizes:

2 modules

3 modules

4 modules

6 modules

8 modules

S&F in repairs modular metal flush box ISI marked complete all as specified and as directed suitable for the following:

2 modules

3 modules

4 modules

6 modules

8 modules

S&F in repairs switch piano flush button type, single pole, ISI marked, one way 5amps, 240V complete all as specified and as directed

S&F in repairs switch piano flush button type, single pole, ISI marked, one way 15amps, 240V complete all as specified and as directed

S&F in repairs socket outlet, 3 pin, multipurpose 5amps flush type, ISI marked, 240V complete all as specified and as directed

S&F in repairs socket outlet, 2 in 1, 3 pin, multipurpose 15amps flush type, ISI marked, 240V complete all as specified and as directed

S&F in repairs ceiling rose surface bakelite 65x50mm, ISI marked, with three terminals complete all as specified and as directed

S&F in repairs PVC lamp holder, insulated body, bracket holder / angle holder 240V complete all as specified and as directed

S&F in repairs bell push flush button type, 5Amps, 240V complete all as specified and as directed

S&F in repairs bell buzzer, ding dong type, 240V, single pole complete all as specified and as directed

M&L for submain wring using proper colour coding with 2 runs of single core, PVC insulated, FRLS unsheathed suitable for 1100V, multistranded, copper conducter cable of size 4sqmm and 1 run of 2.5sqmm multistranded, copper conductor cable 1100V green colour for earth conductor drawn through and including PVC conduit 20mm bore, heavy duty, ISI marked fixed on wall/ceiling, etc. with all required accessories including taking down and disposing off old sub-main wiring any type complete all as specified and as directed

M&L for submain wring using proper colour coding with 2 runs of single core, PVC insulated, FRLS unsheathed suitable for 1100V, multistranded, copper conducter cable of size 6sqmm and 1 run of 4sqmm multistranded, copper conductor cable 1100V green colour for earth conductor drawn through and including PVC conduit 25mm bore, heavy duty, ISI marked fixed on wall/ceiling, etc. with all required accessories including taking down and disposing off old sub-main wiring any type complete all as specified and as directed

M&L for submain wring using proper colour coding with 2 runs of single core, PVC insulated, FRLS unsheathed suitable for 1100V, multistranded, copper conducter cable of size 10sqmm and 1 run of 6sqmm multistranded, copper conductor cable 1100V green colour for earth conductor drawn through and including PVC conduit 25mm bore, heavy duty, ISI marked fixed on wall/ceiling, etc. with all required accessories including taking down old sub-main wiring any type complete all as specified and as directed

Notes for item Nos. 46, 47 & 48: (i) 1/2 runs of 4/6/10sqmm main cable, 1/2 runs of earth conductors and 1 run of PVC conduit as per item shall be measured as one length (ii) Separate conduit shall be used for each sub-main wiring circuit irrespective of numbers of wire (iii) The minimum size of conduit shall be as stipulated, however higher sizes shall be used as per number of cables passing through. The Engineer-in-charge shall ensure for proper size of conduit as per requirement at site

S&F LED tube light fitting 1x18W, 230V, PF 0.9 , CRI> 70, L 70, in commercial channel with powder coated CRCA sheet housing with opal diffuser for LED with LED tubelight with high efficient LED in aluminium housing with clear & milky diffuser, with all accessories and connecting with twin core twisted flexible copper conductor cable and suitable size rod including taking down and disposing off old / unserviceable FTL/CFL fitting any type complete all as specified and as directed

S&F recess/surface mounting LED flat panel 2'x2' with high efficient LED & glare free full window opal diffuser of 36W, PF 0.9, CRI> 70, L 70 with all accessories pre-wired and connecting with twin core twisted flexible copper conductor cable with suitable size rod including taking down and disposing off old / unserviceable fitting any type complete all as specified and as directed

S&F indoor decorative LED batten with opal diffuser with inbuilt LED tube 10W and driver designed with high transmitting optics for even light distribution IP 20 degree protection having length 620mm and PF 0.9, CRI> 70, L 70 and connecting with twin core twisted flexible copper conductor cable including taking down and disposing off old / unserviceable FTL/CFL fitting any typecomplete all as specified and as directed

S&F LED bulk head 10W PF 0.9 , CRI> 70, L 70 with pressure die cast aluminium housing high efficient LEDs with all accessories and enclosed with milky diffuser, IP 66 protection including connecting with twin core twisted flexible copper conductor cable of suitable size including taking down and disposing off old / unserviceable bulk head fitting any type complete all as specified and as directed

S&F LED light fittings 45W, input 110V to 280V, with auto shut down on high voltages, life > 50000hrs, operating temperature 1 to 50oC conforming to IP 65, luminaries comprising of rectangular shaped pressure die cast aluminium housing with weather proof gaskets for lamp and driver compartment with system wattage of 60W =10% W & rated lumens of minimum 5000 lumens with 120 degree view angle, driver shall be constant current type having THD <10% and power factor >0.95 with short circuit protection , open circuit protection, reverse circuit protection, high voltage protection, protection against 10KV high surges, the luminaire having secondary optics with perfectly matched lenses for better light control and complying to IEC60598/IS10322 including changing of clamps, nuts, bolts, washers and painting existing bracket with 2 coats of aluminium paint over a coat of red oxide zinc crome primer with and connecting up with multistranded copper conductor cable 3 core 1.5sqmm from ceiling rose to fitting drawn through existing bracket including taking down and disposing off old / unserviceable HPSV/LED fitting any type complete all as specified and as directed

S&F in repairs recess mounting LED down light 15W with all accessories pre-wired including connecting with twin core twisted flexible copper conductor cable complete all as specified and as directed

S&F in repairs recess mounting low height backlit round LED down light 18W with all accessories pre-wired including connecting with twin core twisted flexible copper conductor cable complete all as specified and as directed

S&F in repairs recess mounting low height backlit square LED down light 6W with all accessories pre-wired including connecting with twin core twisted flexible copper conductor cable and taking down complete all as specified and as directed

S&F in repairs recess mounting low height backlit square LED down light 3W with all accessories pre-wired including connecting with twin core twisted flexible copper conductor cable complete all as specified and as directed

S&F LED post top lantern 36/40W made in cast aluminium spigot housing with decorative opal acrylic diffuser and IP 65 protection of 36/40 watt with all accessories pre-wired including connecting with twin core twisted flexible copper conductor cableincluding taking down and disposing off old / unserviceable fitting any type complete all as specified and as directed

S&F in repairs aesthetically disigned LED post top lantern 15W, input voltage 230VAC, 50Hz with die cast aluminium spigot & prismatic diffuser, IP-65/66 protection class including fixing arrangment like suitable clamps, nut, bolts and washers and connecting up with suitable sized of copper conductor cable complete all as specified and as directed

Supplying, installation and testing water proof fountain light 23W (in combination of 06Nos LED bulb) of approved design suitable for fixing to 40mm pipe with suitable driver, with all accessories pre-wired including connecting with twin core twisted flexible copper conductor cable and taking down and disposing off old unserviceable light fittings complete all as specified and as directed

Supplying, installation and testing LED bush light 6W (warm white) and input voltage 230VAC, 50Hz with cast aluminium housing with toughened glass IP-66 including fixing arrangements into wall/ pillar with necessary connection of suitable sized copper conductor cable and and taking down and disposing off old unserviceable light fittings complete all as specified and directed

S&F in repairs starter 36/40W, suitable for 36/40W tube light working on 220-240V complete all as specified and as directed

S&F in repairs starter 4-22W, 110-130V in single, 4-22W, 220-240V in series suitable for 18W, 2ft, 3x18W recessed mounting fitting complete all as specified and as directed

S&F in repairs electronic choke 36W complete all as specified and as directed

S&F in repairs driver 230V suitable for 45/60 LED light fiittings of existing make and type complete all as specified and as directed

S&F in repairs driver 230V suitable for 45/60 LED garden light fiittings of existing make and type complete all as specified and as directed

S&F in repairs driver suitable for LED strip of 1/3W of existing make and type complete all as specified and as directed

S&F in repairs 3mm thick hylam sheets duly fixed complete all as specified and as directed of the following sizes:

6x6inch

6x11inch

9x6inch

10x12inch

11x13inch

12x14inch

S&F in repairs round plate covers, PVC, 3mm thick, 4inch dia complete all as specified and as directed

S&F in repairs gang box suitable for mounting of 6/16W switches / sockets with necessary copper conductor cable complete all as specified and as directed of the following sizes:

2 modules

4 modules

6 modules

8 modules

12 modules

S&F LED strip 1W flexible type warm white in colour 10mm width of approved deisgn, make and type complete all as specified and as directed

S&F LED strip 1W flexible type warm yellow in colour 10mm width of approved deisgn, make and type complete all as specified and as directed

S&F LED lamp 9W tubular, 230V complete all as specified and as directed

S&F LED lamp 7W tubular, 230V complete all as specified and as directed

S&F CFL 4 pin, 36W complete all as specified and as directed

S&F 18W tube rod, 2ft long of existing type complete all as specified and as directed

S&F check valve, brass of size 15/25/32mm dia suitable for pressure pump of capacity 0.5 -1.0HP as per existing including taking down and disposing off old valve complete all as specified and as directed

S&F auto-cut pressure release valve suitable for pressure pump of capacity 0.5 -1.0HP as per existing including taking down and disposing off old valve complete all as specified and as directed

Supplying, fixing in position, installing and testing pressure pumps 0.5HP, single phase, 230V including taking up/down old unserviceable pressure pump and disposing off complete all as specified and as directed

S&F in repairs metal clad socket outlet with single pole and neutral enclosure with two pin and earth plug socket with and inlcuding one SP MCB 20A 10kA complete all as specified and as directed

Supplying, fixing / laying in repairs PVC insulated aluminium conductor cable, 2 core 6sqmm, flat, solid aluminium conductor, served with inner sheathing of PVC tape and overall PVC sheathed, 1100V grade heavy duty in service connections suspended by and including insulated hangers not more than 1.0m c/c and 4mm suspension wire complete all as specified and as directed

Supplying, fixing / laying in repairs PVC insulated aluminium conductor cable, 2 core 10sqmm, flat, solid aluminium conductor, served with inner sheathing of PVC tape and overall PVC sheathed, 1100V grade heavy duty in service connections suspended by and including insulated hangers not more than 1.0m c/c and 4mm suspension wire complete all as specified and as directed

S&F in repairs PVC 2 core chord, flexible copper insulated cable 24/0.2mm size black/grey in colour and fixed / laid complete all as specified and as directed

S&F in repairs PVC insulated single core copper conductor cable laid / fixed complete all as specified and as directed of the following sizes:

S&F in repairs sheet metal enclosures for 4 way MCCB incomer + 12 module outgoings, vertical type, TPN, load line distribution board with provision for mounting of MCCB 100A as incomer, double door IP 43 protection class conforming to IS 8623-III, with 160A rated bus bar, blanking plates duly flushed in wall and making good the disturbed surfaces complete all as specified and as directed

S&F in repairs sheet metal enclosures for MCB distribution board 415V, TPN, 4 way, double door type, flushed inside wall with 200A rated bus bar and making good the disturbed surfaces complete all as specified and as directed

S&F in repairs sheet metal enclosures for MCB distribution board 230V, SPN, 12 way, double door type flushed inside wall with 200A rated bus bar and making good the disturbed surfaces complete all as specified and as directed

S&F in repairs sheet metal enclosures for MCB distribution board 230V, SPN, 8 way, double door type flushed inside wall with 200A rated bus bar and making good the disturbed surfaces complete all as specified and as directed

S&F in repairs sheet metal enclosures for MCB distribution board 230V, SPN, 4 way, double door type flushed inside wall with 200A rated bus bar and making good the disturbed surfaces complete all as specified and as directed

S&F in repairs MCCB, TPN, 415V, 100A, 16kA complete all as specified and as directed

S&F in repairs MCB TPN, 415V, 63A, 10kA complete all as specified and as directed

S&F in repairs MCB SPN, 240V, 5 to 40A, 10kA, 'B' curve, finger proof terminal, bi-connect termination, 35sqmm terminal capacity, insulated sliding shutter with large two position dolly complete all as specified and as directed

S&F in repairs MCB SP, 240V, 5 to 40A, 10kA, 'B' curve, finger proof terminal, bi-connect termination, 35sqmm terminal capacity, insulated sliding shutter with large two position dolly complete all as specified and as directed

M&L for earthing with galvanised steel earth wire electode 600x600x6mm thick buried directly in ground, earth pit not less than 2.25m deep below ground level connection to and including GI earth wire 4sqmm to the extent of 7.5m as earth lead by means of GI bolts, nuts, etc. with provision of charcoal and salt all as per electrical plate No. 3 of SSR Part-I including water arrangement with GI pipe 20mm dia (medium grade), earth lead protection pipe 50mm madium grade with bends, elbow, etc. from earth plate to test point, excavation and earthwork in any type of soil, returning, filling, ramming and removing of soil to distance not exceeding 50m, make good to match with existing surface making PCC pit (earth chamber) having internal size 300x300x300mm and outer size 600x600x600mm with RCC reinforced cover 50mm thick and testing on completion including making test points on wall as per SSR specifications including taking down and disposing off old / unserviceable earthing complete all as specified and as directed

Notes for serial item No. 110: (i) The cost of copper / GI earth continuity wire with GI pipe 50mm medium grade upto 7.5m is deemed to be included (ii) The earth chamber to be constructed 0.5m from edge of earth pit with necessary watering arrangement. The cost for the same is deemed to be included in above item (iii) Earthing shall produce desired earth resistance values as directed by the Engineer-in-charge

R N Enterprises

Dayal Enterprises

M/S Sonu Traders

R D Bansal