8316 MAINT AND REPAIR OF SANITARY FITTING, PLUMBING WORK, JOINERY AND TILING, ROOFING SHEET, PLASTERING WORK ETC OF OTM ACCN OF DIV TPS UNIT AND 883 AT BN ASC UNDER GE (EAST) BAREILLY.

Amount

Taking down chowkats or frames not exceeding 1.5 Sqm each with shutter (without taking off shutter from the frame) removing from site complete all as specified and directed.

Taking down shutters only n.exc. 1.5sqm each Complete all as specified and as directed.

Taking down Chowkats or frames with shutters (without taking off shutters from the frames) exc. 1.50sqm and n exc 4sqm each Complete all as specified and as directed.

Taking down shutters only exc 1.50sqm and n exc 4sqm each Complete all as specified and as directed.

S & F Solid PVC door frame of size 50 mm x 47 mm made out of 10 mm plain colour PVC sheet reinforced with MS square tube, supplying and fixing in opening as per specification & drawing compete all as specified as directed.

S&F 30 mm thick Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails, M.S. frame shall be covered with heat moulded palin colour PVC 'C' channel heaving a PVC sheert strip of 20mm width suck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bbottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S frame wedded/ sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing.

S & F in repair 2nd class hardwood Plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints,complete all as spd as directed

S&F for 40 mm thick factory made flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed .

S&F 35mm thick factory made glazed and skeleton door shutters open rebated of second class hard wood rail and styles(Hollock), prepared to receive glass/gauge etc without sash bars, edges of framing plain cham-fered or rounded, mitred and rebated sash bars, any numbers The size of rails & style as specified in SSR Part-I (2009) section 8 and as per IS-1003(Part-I) kiln seasoned as per IS-1141 and chemically pressure treated as per IS-401 complete all as specified and directed. (Note :- S&F Glass/gauge shall be measured and paid for separately)

M & L in repairs for powder coated aluminium sliding window with anodized aluminium frame of 3 Track of size 92mmx32mmx 1.5mm thick, with sliding shutters (02 glass and 01 Wirecloth) with necessary channels (top rail, bottom rail and style of size 40mmx 18mm x1.10 mm thick) including glazing with tinted sheet glass panel 4.00mm thick and Aluminum alloy wirecloth 4mm nominal dia and avg width of aperture 1.4mm, fitted with necessary jointing cleats, glazing clips,locking device one for each shutter , rubber packing, aluminium beading, screws, rawl plugs including all necessary holes / drilling etc, complete all as specified as directed. Note : If mentioned section are not available in market, then immediate next higher section shall be provided by Contractor without any extra cost.

M & L in repairs for providing Aluminiium shutter with Powder coated frame 88.9mmx47.63mmx1.60 mm thick fixed with heavy duty aluminium hinge of size 125mm and size of shutter with top rail , middle rail and bottom rail and style of size 85 mm x 44.5 mm x 1.56 mm thick with 200 mm size powder coated 2 nos with each leaf , Heavy duty powder coated aluminium tower bolt 150mm long 2 Nos per leaf, 3 nos Heavy duty aluminium powder coated of size 125mm with each leaf including 12 mm thick both side prelaminated particle board / 5.5 mm thick glass pane in the both panel with necessary joining cleats, rubber packing, aluminium beading, screws etc complete all as specified and as directed. Note : If mentioned section are not available in market, then immediate next higher section shall be provided by Contractor without any extra cost.

S & F in repairs aluminium powder coated partitions with aluminium anodized frame of size 90mm x 44mm x 1.6 mm thick fixed with screws including panels of any 18/19mm thick decorative both side prelaminated perticle board inretior grade upto ht 1.80 mtr above tinted glass panels 5.5mm thick of ht 0.90 mtr , with necessary, jointing cleats, glazing clips, rubber packing, aluminium beading, screws etc complete. all as specified and directed.

S&F in rapair 4 lever brass mortise lock vertical type, size 100mm for aluminium door with 3 nos of key complete all as specified and directed.

S & F 150 mm aluminium anodised barrel tower bolts of extruded section, ISI marked compete all as specified as directed.

S & F 150 mm extruded aluminium alloy handles , fabricated type, anodised, ISI marked compete all as specified as directed.

S & F 100 mm MS butt hinges medium weight cold rolled mild steel compete all as specified as directed.

S & F 300 mm long and Mild steel Chromium plated sliding door bolts, plate type, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed compete all as specified as directed.

S & F mild steel spring 250mm for door, ordinary rat tail rod pattern springs, including roller and roller plate including welding as required for steel frame compete all as specified as directed ( work shall be carried out in MD Qtrs/ OTM accns in different locations of AOR GE east Bareilly as per site requirements upto 4 storieyed building)

S & F galvanised mild steel wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned tracks or wooden beeding patti.compete all as specified as directed.

M & L two coats of synthetic enamel paint over one coat of pink primer on wood or wooden based surface exc. 10cm width or girth including preparation of new or previously untreated surfaces.compete all as specified as directed.

Dismantling of stone slabs and tiles of any description or thickness in floors, aprons Laid, bedded and pointed in any mortar etc. complete all as specified and directed.

Demolition of cement concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) and removing the rubbish complete all as specified and as directed.

M&L 100 mm thick PCC 1:4:8, type D-2 (using 40mm graded stone aggregate) as in sub base floor / pavings complete all as specified and directed.

M&L 25 mm thick PCC 1:2:4, type B-1 (using 20 mm graded stone aggregate) as in floors, surfaces finished fair and even complete all as specified and directed.

All as per item No 25 here in before but in Vertical surfaces size n exc 0.36 sqm such as dado/skirting including 10 mm thick rendering of cement mortar 1:4

All as per item No 27 here in before but in Vertical surfaces size n exc 0.36 sqm such as dado/skirting including 10 mm thick rendering of cement mortar 1:4

M&L for 75mm thick PCC 1:11/2:3 , B1(20mm graded aggregate) as in flooring complete all as specified and as directed.

M&L Forming Contraction (Dummy) joints 65mm deep x 10mm wide, filled with sealing compound Gared A complete all as specified and as directed.

Supply and spreading sand under floors or in foundation including watering and consolidation complete all as specified and as directed.

M&L in repairs for machine pressed pre-cast concrete interlocking coloured paver block, Glossy finish and shape and size conforming to IS-15658-2006 of 80 mm thickness M-40 grade with grey cement and pigment laid dry over and including 50 mm thick stone dust or sand base and compacted using vibrator complete all as specified and directed.

Demolition of reinforcement cement Concrete in slab, kitchen platform and other similar suspended work pavings n exc 15 cm thickness complete all as specified and directed.

M&L for reinforced cement concrete type B1 (1;2;4) nominal mix using 20 mm graded broken stone aggregate as in slabs supported on walls, beams and columns in floors, roofs, landings, shelves and the like complete all as specified and directed.

M&L for Formwork to sides and soffits of floor or roof beams, beam haunchings,girders, bressummers,lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc. complete all as specified and as directed.

M&L for 10mm dia and over mild steel TMT bars, cut to length, bent to shape required including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.90mm dia or securing with clips, quality of steel conforming to demormed or twisted bars Fe-410-W (Gde E-250) complete all as specified and directed.

M&L for 20mm thick Granite (of any type) tiles machine cut, in skirting/ dado including 10 mm thick rendering of CM 1:4 and jointed with grey cement slurry, and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete all as specified and as directed.

Taking down cement plaster including racking out joints, hacking for key & scrubbing down with water etc complete all as specified and directed.

M&L 15mm thick rendering in cement mortar 1:4 to brick masonry wall surfaces or on other than fair faces of brick wall surfaces finished fair & even without using extra cement for fixing tiles etc complete all as specified and directed

Demolition cement concrete of any description and in any position not otherwise specifically provided for complete.

M & L for cement concrete type C2 (1:3:6) (40 mm graded broken stone aggregate) 75 mm thick as in plinth protection and finish even and fair complete all as specified and as directed.

M&L for Forming Construction joint 30mm deep x 10mm wide filled with sealing compound of Grade A complete all as specified and as directed.

M & L in repairs for pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm TCT thick of any colour approved by GE having tensile strength of 550Mpa as in roof covering / cladding to wall , fixed with 5 Nos. self tapping screws on each sheet /each support rubber lining and filling of gap with cement mortar in CM 1:4 with wall and sheet up to 6 mtr height . complete all as specified and as directed.

All as per item No 45 here in before but in ridges of plain sheet and minimun girth 750mm

S & F in repairs for 6 mm thick Fiber cement, (corrugated or semi corrugated) sheets in roofs, walls, fixed with L-type or J-type hook or cranked bolts complete all as specified and directed.

Dismantling timber scanteling 40 sqcm unframed and over section in any position.

S&F steel work in rolled section design as approved, purlins, rafter, posts, gusset plates cleats, wind ties etc including special shape washers etc complete using ERW or induction butt welded tubes confirming to IS 116-1979 grade (medium grade) complete all as specified and as directed.

S&F in repairs gun metal, globe or gate valve, bore dia of pipe in 15 mm, complete all as specified and as directed.

S&F in repairs metal, globe or gate valve, bore dia of pipe in 20 mm, complete all as specified and as directed.

Taking down steel tubing of 15 mm dia bore and connections from walls and cellings or laid in floor including cleaning for refixing in same position (walls , ceiling, floors etc) complete all as specified and as directed.

All as Srl item No. 52 here in before but 20 mm bore

S& F in repair for 20 mm dia CPVC pipe as on wall, floor, ceiling, concealed etc complete and as directed with all fittings and fixtured, jonting solution of ISI marked including making grove in wall/ceiling and finished with cement mortor 1:4 with plumbing nails for securing pipes etcComplete all as specified and directed.

S&F in repair for 25 mm dia CPVC pipe as on wall , floor , ceiling , concealed etc complete and as directed with all fittings and fixtured, jonting solution of ISI marked including making grove in wall/ceiling and finished with cement mortor 1:4 with plumbing nails for securing pipes etc Complete all as specified and directed.

S & F in Repair Pillar taps , cast copper alloy , with capstan heads, chromium plated, screwed down high pressure fancy type of 15 mm bore size with or without lettered Hot or Cold with long screwed shanks and flynuts , screwed for iron pipe and fixed Complete all as specified and as directed.

S&F in Repair Cast copper alloy CP angle valve type stop cock suitable for 15mm bore pipe screwed at both ends or high pressure with Capstan head . Including dismanteling and making good the tiles if required of make Prayag/Marc/Seiko,Complete all as specified and as directed.

S&F in Repair bib taps of bore size 15mm, cast copper alloy, chromium plated, fancy type, with crutch or butter fly handle screwed down, screwed for iron pipe or for brass ferrule Including dismanteling and making good the tiles if requiredComplete all as specified and as directed.

S & F in Repair brass cromium plated conceled stop cock of bore size 15 mm, in position conceled in walls/ceilings or floors complete duly making grooves filled with cement mortar in 1:4 finished to match with adjacent surfaces Including dismanteling and making good the tiles if requiredcomplete all as specified and as directed.

Supply and fixing in repairs 100 mm dia CP brass shower rose swivel type with extension CP rod 15mm dia and 300mm long with connecting rod suitable for 15mm bore pipe .Complete all as specified and directed.

S&F in Repair PVC connection 15mm size with PTMT nuts, of length 600mm Complete all as specified and as directed.

S/F in repair Toilet paper holder chromium plated fixed with CP screws of Make Prayag/Parko/saiko

S & F in Repair viterous china wash hand basin of size 550 x 400 mm, white colour flat back excluding taps, chain and plug and porcelean stopper but including brackets and CP waste fitting . complete all as specified and as directed.

S & F in repairs vitreous china wash down water closet pedestal pattern (EWC) white excluding flushing cistern & Incl white seat cover closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device and flush pipe complete all as specified and as directed.

S&F in repairs vitreous china squatting pan Orissa pattern size 580x440mm white with P or S trap front or back inlet and integral foot rests including connection to trap to flush pipe etc complete including for making good to floor etc complete all as specified and as directed.

S&F in repairs Vitreous China bowl urinal flat back, size of 465 x 355 x 265 mm white (minimum), with grating and union for discharge pipe including fixing plugs , bedding urinal against wall in cement mortar (1:2) etc. including CP Waste fitting and PVC waste pipe complete all as specified and as directed.

S&F in repairs, PVC low level cistern 10 litres capacity, valve less, symphonic action type with float, handle including 32mm dia PVC flush pipe of polyethylene of low or high density & bracket etc complete all as specified and as directed.

S & F in repairs CP health faucet special (1.5 mtr tube) with hook for EWC complete all as specified and as directed.

S&F in Repair Brass chromium plated tubular towel rail 20mm dia 60cm long with and including flanges complete all as specified and as directed.

S & F in repairs soap dish stainless steel as approved by GE complete all as specified and as directed.

S & F in repairs for PVC (SWR) pipes, bore of pipe in 110mm, single socketed, in any length, with rubber ring joints, laid in floors or fixed to walls Complete all as specified and as directed.

S&F in repairs PVC (SWR)pipe single socketed in any length with rubber ring joints,laid in floors 75mm dia complete all as specified and as directed.

Supply and fixing in repairs Low density polyethylene pipes (LDPE) of pressure rating 6 kg/ cm2 of 40 mm dia bore for wash hand basin Complete all as specified and directed.

S&F in repairs PVC(SWR) branch pieces, single (Single Y) equal or unequal or with parallel branches 75mm dia Complete all as specified and as directed.

S & F in Repair for PVC (SWR) bends, any radius, bore of pipe in 75mm with cement solvent in position .Complete all as specified and as directed.

S & F in Repair for PVC (SWR) bends, any radius, bore of pipe in 110mm with cement solvent in position Complete all as specified and as directed.

S&F rotational moulded polethylene water tank of 500 ltrs capacity, ISI Marked, white coloured (cylindrical vertical with closed top with suitable size of M S Tasla with suitable locking system) hoisted and fixed in position all as pacific SSR Part- I including dismantling of existing water tanks capacity n exc 500 ltr complete all as specified and directed.

S&F rotational moulded polethylene water tank of 1000 ltrs capacity, ISI Marked, white coloured (cylindrical vertical with closed top with suitable size of M S Tasla with suitable locking system) hoisted and fixed in position all as pacific SSR Part- I including dismantling of existing water tanks capacity n exc 1000 ltr complete all as specified and directed.

S & F in repair PVC floor trap with CP grating weight of grating not less than 35 grams joints to waste pipe in run lead joint dia of outlet 75 mm of floor, trap with deep water seal and of heavy weight coated with tar/black bitumen paint including making good with existing surface by provision of tiles and refilling of the dismantel mnaterials complete all as specified and directed.

Supply and fixing in repair 3 mm thick figured glass ordinary quality and size in any type of frames and glazing with oil putt (or beading) in square exc. 0.5 Sqm each.with hacking out of old glasses Complete all as specified and directed.

S & F for 3 mm thick sheet glass, ordinary quality and glazing with oil putty in square n. exc. 0.5 Sqm in each pane for steel/ aluminium windows with hacking out of old glasses compete all as specified as directed.

S & F in repairs GI wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with tinned tracks or wooden beeding patti.to gauge door/window shutters and wooden windows compete all as specified as directed.

Supply and fixing in repairs Aluminium wire cloth power woven 0.45 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with tinned tacks or galvanized wire staples for Aluminium window and ventilator complete all as specified and directed.

M&L preparation new or previously untreated steel surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over and including one coat of red oxide zinc chrome primer complete all as specified and directed.

M&L for preparing newly plastered walls surfaces and applying two coats of oil bound distemper over 1mm thick wall care putty complete all as specified and directed.

M&L for preparing newly plastered walls surfaces and applying two coats of cement base paint over a coat over one coat primer complete all as specified and directed.

M&L for preparing newly plastered surfaces and applying three coats of white wash on ceiling complete all as specified and directed.

S&F 5mm thick 5mm thick Prelem PVC sheet in strips & channel feathered at the edges for fixing on Solid PVC Wall Lining, Insulated PVC Wall Lining/Ceiling and Solid PVC Partitions inclusive of Solvent Cement and fixing at site. complete all as specified

M&L brick work with sub class B bricks burnt straight or curved on plan exc 6 M mean radius built in cement mortar 1:6 complete all as specified and as directed.

Demolition of brick work or stone/ boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars etc but excluding ashlar facing dressed stone work and precast concrete articles complete all as specified and directed.

S&F in repair PVC / WPC/ charcole interlocking wall paneling/ ceilling (LOUVERS SEAMLESS DESIGNER PLANKS) High grade pvc, 100 % termite & water resistant for 12-20 mm thick fixing with ss clips , bolt or adhesive with aluminium framing/grid with suitable fittings complete all as specified and directed

S&F in repairs Stainless Steel work as Gde 304 SS in railing/swimming pool ladder/grab bar/supports/ balusters etc including all fitting and fixing all as specified and directed.

Providing & fixing false ceiling at all heights with GRG (Glass Fiber Reinforced Gypsum) false ceiling tiles of Size 595x595 mm of approved texture, design and patterns having moisture content less than 2%, humidity resistance of 99%, NRC0.50 to 0.75 as per IS 8225:1987, Noncombustible as per BS 476 (part 4)-1970 and light reflectance of 85% (minimum) to be laid in true horizontal level suspended on inter-locking metal T-Grid of hot dipped galvanized iron section of 0.33mm thick (galvanized @ 120 grams per sqm including both sides) comprising of main-T runners of size 15x32 mm of length 3000 mm, cross - T of size 15x32 mm of length 1200 mm and secondary intermediate cross-T of size 15x32 mm of length 600mm to form grid module of size 600 x 600 mm, suspended from ceiling using galvanized mild steel items (galvanizing @ 80 grams per sqm) i.e. 50 mm long, 8 mm outer diameter M-6 dash fasteners, 6 mm dia fully threaded hanger rod up to 1000 mm length and L-shape level adjuster of size 85x25x2 mm. Galvanized iron perimeter wall angle of size 24x24x0.40 mm of length 3000 mm to be fixed on periphery wall / partition with the help of plastic rawl plugs at 450 mm center to center and 40 mm long dry wall wood screws. The work shall be carried out as per specifications, drawing and as per directions of the Engineer-in-Charge.

Supplying and fixing in repairs ornamental desingned pattern type precast cement concrete louvres and jallies, 50mm thick (measured solid) including precast post of standard sections in diffrent geomatrical shapes, including all mouldings type B0 1:2:4, 12.5 mm graded stone aggregate set in CM 1:4 including embedding precast post etc including two coats of exterior emulsion over one coat of primerof different colour as approved completed and as directed . pattern approved by GE.

M&L for French polishing / melamine polish on surfaces of any description, width or girth including cleaning and preparing the surface including a coat of wood filler on old works with one or more coats on old surfaces of wood including base coats etc complete and as directed.

M & L for 0.9 mm Decorative laminate type 1 of surface finish, colour and pattern of smooth glossy /matt finish with fully glazed finish as approved as in cupboard, pelmemets, doors or to be fixed at any location as directed, fixed with approved adhesive as per manufacturer' s instructions including similar colour edge self adheshive banding tape hot pressed on exposed edge of board as directed. (lamination shall be machine pressed as directed on shutters, CBs, plywood etc as required.)

S&F in repair table top chinaware wash hnad basin with vanity made of HDHMR plywood. Wash hand basin with front cabinet with 02 drawer with SS Channels for shooth operationg with knob and 01 door with knob. Hardware premium quality projectile SS hingesfor door. haigh quality wash hand basin. The vanity shall stand on SS legs complete all as specified and directed.

S&F in repair Vertical blinds 100mm louversw width, quality of approved make fabrics made 100% polyster woven fabric thickness 0.40mm thick Acrylic coating & Fraying and treated for dust repellency. UV proof, virtually maintance free having plastic bottom chain thickness of chain 0.50mm and diameter 3mm, plastic with metal bottom and suitable coating on exterior including all fixture and fittings complete in all respect as oer design/color/shade including requisite installation brackets etc as required for the installation at site anchoring arrengments complete all as directed.

Vasundhra Enterprises

j u enterprises

M/S ABHISHEK ENTERPRISES

M/S Quality Constructions

NETRAPAL SINGH

RIYASAT ALI KHAN