FTH compound wall and drainage balance works.

Amount

Earthwork excavation

Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including disposal of excavated earth, lead up to 50 m and lift up to 1.5 m, disposed earth to be levelled and neatly dressed.All kinds of soil

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 nominal size)

Random rubble masonry

Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20 mm nominal size) up to plinth level with:Cement mortar 1:6 (1 cement : 6 coarse sand)

RCC upto plinth level

Providing and laying in position specified grade of reinforced cement concrete,excluding the cost of centering, shuttering, finishing and reinforcement - All work upto plinth level:1:1:5:3 (1 cement 1.5 coarse sand :3 graded stone aggregate 20 mm nominal size

RCC above plinth level

Reinforced cement concrete work in walls (any thickness), including attachedpilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers,abutments, posts and struts etc. up tot floor five level excluding cost of centering, shuttering, finishing and reinforcement

Shuttering for plinth beam

Centering and shuttering including strutting, etc. and removal of form for:Lintels, beams, plinth beams, girders bressumers and cantilevers

Centering and shuttering for foundation

Centering and shuttering including strutting, etc. and removal of form for:Foundations, footings, bases of columns, etc for mass concrete

Solid block masonry- Rate include solid block masonry for corniche/grooves/architectural works as shown in the drawing

Solid block masonry using pre cast solid blocks (Factory made) of size 30x20x15 cm or nearest available size confirming to IS 2185 part I of 1979 for foundation and plinth with thickness 15cm in: CM 1:6 ( 1 cement :6 coarse sand) etc complete excluding the cost of cement.

Steelwork for RCC

Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete upto plinth levelThermo - Mechanically Treated bars of grade Fe-500D or more

Plastering works- Rate include plastering for corniche/grooves/architectural works as shown in the drawing

Plastering with 15 mm cement plaster of mix:1: 4 ( 1 cement : 4 fine sand) for compound wall including groove cut,cornice works etc as per drawing and instructions of engineer in charge

Centering & shuttering for Drainage

Centering and shuttering including strutting, propping etc. and removal of form work for:Retaining walls, return walls, (any thickness) including attached pilasters, buttresses, plinth and string courses fillets, kerbs and steps etc.

Labour charge

Miscellaneous labour

Structural GI work for Roofing over verandah

Steel work in built up GI tubular (round, square or rectangular hollow tubes etc.) trusses etc,including cutting, hoisting, fixing in position and applying a priming coat of approved epoxy primer and 2 or more coats of epoxy paint, including welding and bolted with special shaped washers etc. complete

Roofing with cement board 8 mm thick

Providing and fixing plain Multipurpose Cement board (High Pressure steam cured) as per IS : 14862, with suitable screws for fibre cement board in ceiling etc. complete (frame work to be paid separately) : 12 mm thick cement board

False ceiling with 9mm thick TKT panels

Providing and fixing wall panels with 9 mm thick TKT Panel boards of approved quality( clour and pattern of panels shall be as per direction of engineer) with selfdrilling / taping screws / fasteners @ 60cm c/c of approved make(if required for additional support provided aluminum frame work with standard sections-(cost of frame work to be paid for separately)

Brick pillar demolition

Demolishing brick work manually / by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-Charge.In cement mortar

Plastering works

12 mm cement plaster finished with a floating coat of neat cement of mix:1:3 ( 1 cement : 3 fine sand)

Brick masonry

Brick work with common burnt clay F.P.S (non modular) bricks of class designation 7.5 in foundation and plinth in:Cement mortar 1:4 (1 cement : 4 coarse sand)

Providing aluminium window frames in champagne silver colour

Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS : 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions,i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc.Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminnium snap beading for glazing /paneling, C.P. brass/ stainless steel screws, all other accessories complete as per architectural drawings and the directions of Engineer-in-charge.(Glazing, paneling to be paid for separately):For fixed portion Powder coated aluminium (minimum thickness of powder coating 50micron)- colour champagne silver

Providing 6 mm thick toughened glass for windows/ fixed frames

Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of Engineer - in -Charge. (Cost of aluminium snap beading shall be paid in basic item):With float glass panes of 5.50 mm thickness

MS grill to protect aluminium window glass and gate stopper etc

Providing and fixing M.S. Grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete.Fixed to steel windows by welding

Painting works for building and compound wall

Finishing walls with Acrylic Smooth exterior paint of required shade :New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm)

Providing and fixing Shingles on the top of cement board roofing with suitable screws etc. complete as per instruction of Engineer-in-charge

Providing and fixing good quality Shingles (Saint Gobain/equivalent) of any colour on the top of cement board roofing with suitable screws etc. complete as per instruction of Engineer-in-charge

PRASAD PILLAI (BID ID -2214401)

Bidder Name

U. AZEEZKUNJU

PRASAD PILLAI