Improvement of blackspot on Guler to Dhangar road Km. 0/0 to 5/360

Amount

Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material.Ordinary Soil complete as per drawing and MORD Technical Specification clause 305.1 and as per the direction and the entire satisfaction of Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals.The rate including Royality, Malkhana, Octroi, toll tax, GST or any other taxes imposed by the Government.

Providing and laying mechanically mixed and vibrated concrete for plain cement concrete Grade-M20 (M-Twenty) Nominal mix 1:2:4 (one cement isto two sand isto four graded crushed stone aggregate (40mm) forty millimeter nominal size) in or under water in open foundation for all types of structure and the like in Catchpit flooring etcetera, including cost of form work and curing complete as per drawing and MORD technical specification clause 802, 803, 1202 & 1203 and as per the direction and the entire satisfaction of Engineer-in-Charge, including pumping or bailing out water/dewatering (surface and sub-soil water) and removal of the slush which may arise at the time of laying under water for all heights/depths and any quantum of water complete including carriage of materials up to all leads, lifts and other incidentals. The rates including Royality, Malkhana, Octroi, Toll tax, Sale tax, GST or any other taxes imposed by the Government.

Providing and eracting a "W" metal beam crash barrier comprising of 3mm (Three millimeter) thick corrugated sheet metal beam rail, 70cm (Seventy centimater) above road/ground level, fixed on ISMC series channel vertical post,150x75x5mm (One hundred fifty into seventy five into five millimeter) spaced 2m (Two meter) centre to centre 1.8m (one point eight meter) high, 1.1m (one point one meter) below ground/road level, all steel parts and fitments to be galvanised by hot dip process, all fittings to conform to IS:1367 and IS:1364, metal beam rail to be fixed on the vertical post with a spacer of channel section 150x75x5mm (One hundred fifty into seventy five into five millimeter), 330mm (Three hundred thirty millimeter) long complete as per clause 810 as per the direction of the Engineering-in-Charge, including carriage of materials within all leads and lifts and other incidentals. The rates including Royality, Malkhana, Octroi, toll tax, sales tax, GST or any other taxes imposed by the Government.

Govt. Contractor

shyam sharma