Renovation of B Flat Quarters in FACT Udyogamandal Township.

Hacking of CC flooring including cleaning for surface etc. complete as per direction of the Engineer-in-Charge.

Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead.

Taking out existing wooden door shutter, repair by cutting, painting etc. and refixing of repaired door shutters to existing door frames, including replacement of hinges with screws, etc. as required, all complete as per the direction of the Engineer-in-charge.

Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq. meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground, all complete as per directions of Engineer-In-Charge - With cement mortar 1:4 (1 cement : 4 fine sand)

Providing and fixing Chlorinated Polyvinyl Chloride SDR 11 pipes of Astral or equivalent, having thermal stability for hot & cold water supply, including all CPVC fittings, fixing the pipe with clamps at 1.00 m spacing, joining pipes & fittings with CPVC solvent cement, the cost of concealed work for cutting chases and making good the same, making good the walls, testing of joints etc complete as per direction of Engineer in Charge- 20mm dia

Supplying and fixing PVC pipes conforming to IS 4985-2000 class II - 4kg/cm2 for soil waste and rain water lines with all required specials such as plain bends, single junctions, elbows, crosses, unions, shoes, door bends, double junctions, vent cowls etc. with or without door including cutting masonry or concrete floors , sunshades etc wherever necessary and jointing pipes with approved quality resin cement and fixing pipes with MS fixing clamps screwed on to wooden plugs embedded in masonry wherever required and painting the clamps with two coats of enamel paint over one coat primer etc. complete - 110mm or nearest OD .

Supplying and fixing PVC floor trap with strainer (PVC solo grating) of approved brand 110mm size with required provision of outlets and inlets, locking tile, strainer, etc. as per manufactures specifications, cutting and making good the walls and floors, etc. complete.

Applying priming coats with water thinnable cement primer of approved brand and manufacture, having VOC (Volatile Organic Compound) content less than 50 grams/ litre on all surface.

Wall painting with premium acrylic emulsion paint of interior grade,having VOC (Volatile Organic Compound ) content less than 50 grams/ litre of approved brand and manufacture, including applying additional coats wherever required to achieve even shade and colour.One coat

Wall painting with acrylic emulsion paint, having VOC (Volatile Organic Compound) content less than 50 grams/ litre, of approved brand and manufacture, including applying additional coats wherever required, to achieve even shade and colour,One coat - of exterior grade.

Painting with synthetic enamel paint, having VOC (Volatile Organic Compound) content less than 150 grams/ litre, of approved brand and manufacture, including applying additional coats wherever required to achieve even shade and colour:-One coat

Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar tap, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: White Vitreous China Flat back wash basin size 550x400 mm with single 15 mm C.P. brass pillar tap.

Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931 : 15 mm nominal bore.

Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete.40 mm dia.

Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour 450 mm long towel rail with total length of 495 mm, 78mm wide and effective height of 88 mm, weighing not less than 170 gms

Applying one coat best approved quality polyurethane clear wood finish one coat to doors, windows etc. after rubbing with sand paper and cleaning well the surfaces at all heights.

Transporting excess spoil earth, gravel, sand, broken stones, split stones, laterite stones, blasted rubble upto 45 DM3 size etc. by lorry to places pointed out upto a maximum distance of 5KM including loading with a lead of 50m and lift upto 1.5m at each loading point etc. complete.

Supplying ,threading /laying and jointing PVC pipes conforming to IS 4985-1981 class IV(6kg/cm2) for internal water lines with all required pvc specials such as tees,bends, elbows, unions,reducers, etc.with clamps including cutting and making good the walls etc. complete - 50mm or nearest OD

Supplying and fixing PVC pipes conforming to IS 4985-2000 class II - 4kg/cm2 for soil waste and rain water lines with all required specials such as plain bends, single junctions,elbows, crosses, unions, shoes, door bends, double junctions, vent cowls etc. with or without door including cutting masonry or concrete floors , sunshades etc wherever necessary and jointing pipes with approved quality resin cement and fixing pipes with MS fixing clamps screwed on to wooden plugs embedded in masonry wherever required and painting the clamps with two coats of enamel paint over one coat primer etc. complete -63mm or nearest OD .

Supplying and fixing at all levels FRP doors with frames & 4mm etching glass made of glass fibre conforming to IS: 11551 (As per attached technical specifications).

Supplying and fixing Stainless Steel Concealed Stop cock ¾ inch with adjustable wall flange "CERA/ HINDWARE or equivalent type.

Supplying and fixing Stainless Steel angular Stop cock with wall flange "CERA/ HINDWARE or equivalent type

Supplying and fixing Over Head Shower with shower arm and wall falnge with chrome finish (Hindware or similar)

Floor Painting with water based floor paint of approved brand and manufacture of required colour to give an even shade- 2 coat

Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms- 15 mm nominal bore.

Providing and fixing Stainless Steel AISI 304 (18/8) kitchen sink as per IS:13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required :- 610x460 mm bowl depth 200 mm

Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing :Rectangular shape 453x357 mm

Providing and fixing PTMT Soap dish holder having length of 138mm, breadth 102mm, height 75mm with concealed fitting arrangements weighing not less than 106 gms.

Providing and laying Double charge Vitrified tiles polished finish in different sizes (thickness to be specified by the manufacturer), with water absorption less than 0.08% and conforming to IS: 15622, of approved brand & manufacturer, in all colours and shade, in skirting, riser of steps, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS: 15477, in average 6 mm thickness, including grouting of joints of Size of Tile 600x600 mm

Providing and laying rectified Glazed Ceramic Antiskid floor tiles (thickness to be specified by the manufacturer), of 1st quality conforming to IS: 15622, of approved make, in all colours, shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick Cement Mortar 1:4 (1 Cement: 4 Coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm excluding pointing the joints etc., complete.

Grouting the joints of flooring tiles having joints of 3 mm width, using epoxy grout mix of 0.70 kg of organic coated filler of desired shade (0.10 kg of hardener and 0.20 kg of resin per kg), including filling / grouting and finishing complete as per direction of Engineer-in-charge.

Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.

Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required : W.C. pan with ISI marked white solid plastic seat and lid

Providing and fixing uplasticised PVC connection pipe with brass unions : 45 cm length: 15 mm nominal bore

S Shaji