Annual Plan-OMASSERY GP 24-25 , PR NO 136/25 KANNANKODE DWSS COMPLETION -IN WARD NO 5-General Civil Work

Amount

Distribution line

OD218578/2024-2025:Excavating trenches of required width for pipes, cables, etc including excavation for sockets, and dressing of sides, ramming of bottoms, depth up to 1.5 m, including getting out the excavated soil. and then returning the soil as required, in layers not exceeding 20 cm in depth, including consolidating each deposited layer by ramming, watering, etc. and disposing of surplus excavated soil as directed, within a lead of 50 m: All kinds of soil( MODIFIED DATA OF 2.10.1.1) Pipes, cables etc, not exceeding 80 mm dia

OD218582/2024-2025:Providing Street fountain with vertical posts by 75mm PVC Pipe 1.20 m long fixing in concrete and connecting the taps including all cost of materials,labour charges etc (Inside connecting water line pipe and tap should be paid seperatly)

18.15.2:Providing and fixing brass bib cock of approved quality :20 mm nominal bore

18.85.2:Providing and fixing stainless steel pipe of grade AISI 304 as per JIS standard 3448 complete with press type (fitting shall be paid for separately) i/c fixing of the pipe with clamps at 1.00 m spacing including cutting and making good the walls including testing of joints complete as per direction of Engineer-in-charge. ( The pipe length inserted in the fitting shall not be measured for payment). internal work- Exposed on wall.22.22 mm outer dia pipe.

4.1.3:Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:2:4 (cement : 2 coarse sand (zone-III) : 4 graded stone aggregate 20 mm nominal size)

18.77:Cutting holes up to 15x15 cm in R.C.C. floors and roofs for passing drain pipe etc. and repairing the hole after insertion of drain pipe etc. with cement concrete 1:2:4 (1 cement : 2 coarse sand: 4 graded stone aggregate 20 mm nominal size), including finishing complete so as to make it leak proof.

OD260669/2024-2025:Providing and fixing ball valve (uPVC, 12.5kg/cm2, 25mm ( ¾” ) of approved quality, High or low pressure,:25 mm nominal bore(Modified 18.18.3)

13.61.1:Painting with synthetic enamel paint of approved brand and manufacture to give an even shade:Two or more coats on new work

13.44.1:Finishing walls with water proofing cement paint of required shade:New work (Two or more coats applied @ 3.84 kg/10 sqm)

10.16.2:Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete.Hot finished seamless type tubes

OD315116/2024-2025:Providing and fixing PVC pipes includings jointing of pipes with one step PVC solvent cement, testing of joints complete as per direction of Engineer in Charge.32 mm dia 10.Kgf/cm2 ( WITH OUT TRENCHING AND RE FILLING MODIFIED DATA OF 50.18.9.4.1)

OD315117/2024-2025:Providing and fixing PVC pipes includings jointing of pipes with one step PVC solvent cement, testing of joints complete as per direction of Engineer in Charge.63 mm dia 10Kgf/cm2( WITH OUT TYRENCHING AND REFILLING MODIFIED DATA OF 50.18.9.7.1)

OD315118/2024-2025:Providing and fixing PVC pipes includes jointing of pipes with one step PVC solvent cement, testing of joints complete as per direction of Engineer in Charge. 25 mm dia 10KGF/cm2( WITH OUT TRENCHING AND REFILLING MODIFIED DATA OF 50.18.9.3.2)

12.50:Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+0.05%), total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling/self tapping screws of size (5.5x55mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.

AHAMMED KUTTY P (BID ID -2041518)

Bidder Name

SHIJULAL M

AHAMMED KUTTY P