REPAIR MAINTENANCE OF DISTRIBUTION PIPE LINE VALVES, REPAIR TO VALVE PITS AT SHIKARGRAH AND OTHER AREA UNDER GE (ARMY) NO. 2, JODHPUR

Amount

Excavation in trench not exceeding 1.5M wide and not exceeding 1.5M in depth and getting out for taking out and laying of pipe line in any type of soil complete all as specified and as directed.

Returning, filling in including spreading, levelling, watering and well ramming in layers n. exc 25 cm thick in any type of soil complete all as specified and as directed.

Removal of surplus spoil to a distance n exc 50M and deposited where directed at a level n. exc 1.5M above the starting point in any of soil complete all as specified and as directed.

M & L for taking up cast iron of size 100 mm bore (CI) / DI /GI water mains (including all fittings), with spigot and socket ends and lead joints of any size complete all as specified and as directed.

All as per ser item no 4 above but of size 150 mm bore.

Supply and lay DI pipe (ISI Marked) of size 100 mm bore centrifugally cast of class K-7 with spigot and socket ends suitable for tyton joints including rubber gasket complete all as specified and as directed.

All as per ser item no 5 above but of size 150 mm bore.

Material and labour for fixing DI specials of size upto 150 mm bore such as bends(any type, radius and angle),tappers any type, (straight, bend, increasing, decreasing or double socket etc) tee pieces single branch, 'Y' junction, double branch, cross (all sockets or socket and spigot) collars, caps & plugs complete all as specified and as directed.

Supply and Fixing for DI sluice valve of size 100 mm bore PN-1.6 incl new rubber gasket, nuts and bolts brass spindle etc and dismentling of existing unserviceable one complete all as specified and as directed.

All as per ser item no 7 above but of size 150 mm bore.

All as per ser item no 7 above but of size 200 mm bore.

Material and labour for repairing the leakage of size 80 mm bore of lead joints for CI/DI pipe incl bailing out the line water after burning out the existing lead from joints and using extra lead and spun yarn as required complete all as specified and as directed. Note :- Rate of Excavation and earth work returning filling and removing shall be deemed to be included in the rate quoted by contractor.

All as per ser item no 8 above but of size 100 mm bore.

All as per ser item no 8 above but of size 150 mm bore.

All as per ser item no 8 above but of size 200 mm bore.

All as per ser item no 8 above but of size 250 mm bore.

All as per ser item no 8 above but of size 300mm bore

All as per ser item no 8 above but of size 350mm bore

Supply and fix LRC joint /Detachable joint of size 80 mm bore for repairing the leakage of any type of joint for CI/DI pipe at spigot socket end and incl bailing out the line water as required complete all as specified and as directed. Note :- Rate of Excavation and earth work returning filling and removing shall be deemed to be included in the rate quoted by contractor.

All as per ser item no 9 above but of size100 mm bore.

All as per ser item no 9 above but of size150 mm bore.

All as per ser item no 9 above but of size200 mm bore.

All as per ser item no 9 above but of size250 mm bore.

All as per ser item no 9 above but of size300 mm bore.

All as per ser item no 9 above but of size 350 mm bore.

Supply and Fixing for CI Butterfly valve (ISI Marked) size 100 mm bore PN-1.6 incl new rubber gasket, nuts and bolts etc and dismentling of existing unserviceable complete all as specified and as directed.

All as per ser item no 10 above but of size 150 mm bore.

All as per ser item no 10 above but of size 200 mm bore.

All as per ser item no 10 above but of size 250 mm bore.

All as per ser item no 10 above but of size 300 mm bore.

Taking up or down steel tubing/HDPE pipes of size15mm bore alongwith fittings such as tee, bends etc and connections incl removal from site

All as per ser item no 11 above but of size 20mm bore.

All as per ser item no 11 above but of size 25mm bore.

All as per ser item no 11 above but of size 40mm bore

All as per ser item no 11 above but of size 50mm bore.

All as per ser item no 11 above but of size 80mm bore.

M&L galvanised iron pipe medium grade (ISI marked) of size 15mm bore with and including medium grade (ISI Marked) fitting concealed or fixed to walls, celling or laid in floors including chase cuttings, making good to distributed surfaces as per existing as directed and specified of the following sizes:- Note: Cost of cutting/leaving/forming chases, holes etc through walls, floor, plinth protection, roof etc as required and making good the surface to match as per existing shall deemed to be included in quoted rate by the tenderer complete all as specified and as directed.

All as per ser item no 12 above but of size 20mm bore.

All as per ser item no 12 above but of size 25mm bore.

All as per ser item no 12 above but of size 50mm bore.

Supply and fixing of galvanised iron pipe medium grade (ISI marked) of size 15mm bore with and including medium grade (ISI Marked) fittings laid in trenches jointed and tested complete all as specified and as directed.

All as per ser item no 13 above but of size 20mm bore.

All as per ser item no 13 above but of size 25mm bore.

All as per ser item no 13 above but of size 40mm bore

All as per ser item no 13 above but of size 50mm bore.

All as per ser item no 13 above but of size 80mm bore

Supply and fix gun metal gate valve (ISI Marked) of size 15 mm dia with iron wheel head screwed both ends for iron pipe and fixed of following sizes incl taking down and removal from site complete all as specified and as directed.

All as per ser item no 14 above but of size 20 mm dia

All as per ser item no 14 above but of size 25 mm dia.

All as per ser item no 14 above but of size 50 mm dia

Dismentling of stone massonary valve chamber of internal size 1050 x 1200 x 1000mm and pattern and at any position and construction of valve chamber with PCC foundation 1:4:8 type D2 PCC block massonary built in cement mortar (1:6) with plastering of 15mm thickness internally and externally above and below ground level with PCC 1:2:4 type B1 using 20mm graded stone aggregate incl frame made of angles iron of size matches with the internal size of the valve chamber and chamber cover made of MS sheet of 3.0mm thickness including MS hinge and painting the steel surfaces with two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed.

All as per ser item no 15 above but of size 900 x 600 x 1000mm

All as per ser item no 15 above but of size 450 x 450 x 600mm

Material and labour for clamp made of MS flat of size 50x6 mm with nuts & bolts for connection from existing 50-200 mm bore CI/DI/GI pipe line by providing 15 to 50mm bore socket complete incl welding, nuts bolts, rubber sheet etc all as directed by Engr-in-Charge at site.

S&F in replacement of u/s PVC float valve,high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule of size 20 mm bore.

S&F in replacement of u/s PVC float valve , high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule of size 25 mm bore.

Material and labour for laying of pipe under road crossing of size 50 mm to 200 mm by trenchless technology by aguring or mechnical means in any type of soil.

M & L for road cutting and repairing the same with road patch material width upto 75 cm all as specified and directed by EIC. Note: Road repair work shall be completed the same day of work execution in all aspect, failing which a penalty of Rs 100 per meter for per hour delay will be imposed and deducted from RAR/Final Bill.

M&L PCC (1:2:4) type B-1 (using 20 mm graded stone aggregate) in support of pipes or foundation of pump complete all as directed.

M&L 15 mm thick cement plaster in cum (1:6) on brick/stone/PCC surface fair and even complete all as directed

Supplying and laying in replacement of worn and torn synthetic Rubber insulated mats 2 mm thick for voltage upto 3.3 kv for electrical purpose as per IS 15652-2006, (superseding IS 5424) suitable for electrical shock safety of sizes 2m x 1m all as specified and directed by EIC.

Supplying and laying in replacement of worn and torn synthetic Rubber insulated mats 2.5 mm thick for voltage upto 11 kv for electrical purpose as per IS 15652-2006, (superseding IS 5424) suitable for electrical shock safety of sizes 2m x 1m all as specified and directed by EIC.

S&F CI foot valve threaded/flanged as required of 200 mm size. Make: Normex, Kartar, Sant

Material and labour for cutting existing 80/100 mm GI/DI pipeline disconnecting the existing GI clamp connections of 50/80/100 mm dia, disconnecting the 80/100 mm GI pipeline upto the adjacent socket/spigot in both side and taking the pipe to workshop for cutting thread, making threads on pipe at four sides (four two connections Two side each), or insert a DI fitting and bring back to the site insertion of Equal Tee of size 80/80/80mm or reducing Tee of size 80/80/50 mm or 100/100/80 or 100/100/50 as required at site making proper alignment and re-installing the pipe in original position with additional plumbing/welding works as required at site and testing the same for any leakage and pressure to overhead tank complete all as specified and directed by Engineer-in-charge. Note :- 1. Cost GI fittings required like Tee, elbow, Nipples etc as required shall deemed to be included in quoted rates. 2. Cost of any additional plumbing work/welding work deemed to be included in quoted rates. 3. Cost of excavation/ earth work required shall deemed to be included in quoted rates. 4. Contractor shall rectify the fault and reconnect the pipeline at the same day. 5. Any DI fittings required and installed shall be measured under respective Sch 'A' item.

Material and labour for interchanging the connections of OHT of cap 500/1000 ltrs at including cutting the existing 20/25 mm GI pipe connections of 02 x tanks, cutting threads, supply and fixing GI fittings like union, elbow, sockets, nipples etc and GI pipe of size 20/25 mm incl any plumbing/ welding work required complete all as specified and directed by Engineer-in-charge. Note :- 1. The work will be carried out on height upto 18 Mtr contractor will ensure providing safety tools and equipment to the labour/plumber and the cost of the same will deemed to be included in quote rates. 2. Cost of any additional plumbing work/welding work deemed to be included in quoted rates. 3. Cost of repairing the wall and making the surface as per existing shall deemed to be included in quoted rates. 4. Cost of GI fittings required and GI pipe upto length of 1 Mtr is deemed to be included in quoted rates.

Supply and fixing of box type chamber of size 400 x 200 x 800 mm made of iron sheet of thickness 3 mm and angle iron of size 32 x 6 mm with locking arrangement incl drilling the holes in wall, fitting of fastners for fixing of chamber, any plumbing/ welding work required complete all as specified and directed by Enginner-in-charge. Note :- 1. Chamber should contain holes for passage to 04 Nos 25 mm GI pipes at one side and 01 No 50 mm GI pipe at other side, distance b/w wall and pipe and b/w the pipe may vary at each location, Contractor need to check and measure the site condition physically and then fabricate the chamber accordingly. 2. Cost of any additional plumbing work/welding work deemed to be included in quoted rates. 3. Cost of repairing the wall and making the surface as per existing shall deemed to be included in quoted rates.

Supply and fixing for CI Butterfly valve (ISI Marked) size 150 mm bore PN-1.6 incl new rubber gasket, nuts and bolts etc including and dismantling of existing unserviceable complete all as specified and as directed. Make: Normex, Kartar, Zoloto

Taking up raising/ delivery DI water mains 100mm bore (including all fittings), with flanged or spigot and socket end with tyton joints/ gasket with nut bolts & washers of any size and relaying the same with using new gasket / tyton joint complete all as specified and as directed.

All as per ser item no 30 above but of size 150 mm bore

All as per ser item no 30 above but of size 200 mm bore

All as per ser item no 30 above but of size 300 mm bore

M&L for repair of CI/DI pipe line of lead joints/push tyton rubber joint socket of size 300 mm bore and spigot type taking up/down excavation, returning filling and removal of excavated soil near pipe line of size as mentioned below in break down maint of raising main line / distribution line. Providng any type of special tools & plants such as JCB, Hydra cranes, pumps & materials (such as lead, lead wool, detechable joints/ leak repair clamp suitable for CI/DI fittings,patsun/spun yarn, caller/short piece of pipes or any other fittings to be required to minimise the breakdown time and rectification of the problem as soon as posible. Rectification work must be start within two hours of intimation to contractor. Any delay in rectification may be penalised as deemed fit , Rate of excavation removing and returning filling willbe deemed to be included in the rate quoted by contractor.

All as per item ser no 31 above but of size 250 mm bore

All as per item ser no 31 above but of size 200 mm bore

All as per item ser no 31 above but of size 150 mm bore

All as per item ser no 31 above but of size 100 mm bore

All as per item ser no 31 above but of size 80 mm bore

RISING ELECTRICALS (BID ID -3124118)

M/S Dharam Chand Lal Chand Jain (BID ID -3111875)