Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹1.9 LAccepted-AOC 154 155 SUBATHU DISTT SOLAN 173206 | SOLAN | SOLAN | HIMACHAL PRADESH | 173206 | L1 | Accepted-AOC L1 | |
| 2 | L2₹26.8 L+₹24.7 L (1195.2%)Rejected-AOC 1170 BENGALI MOHALLA NEAR PRABHAKAR HOSPITAL AMBALA CANTT 133001 | AMBALA | HARYANA | 133001 | L2 | Rejected-AOC L2 |
| Sl No | Description | Qty | Unit | The Rahul Vig L2 | M/S PARMOD KUMAR L1 |
|---|---|---|---|---|---|
| 1.00 | Dismantling doors, windows and clerestory windows (steel or wood) shutter of area 3 sqm and below including chowkhats, architrave, holdfasts etc., stacking within 50 metres lead, complete all as specified and directed by Engr-in-Charge. | 5 | Each | 15,000 ₹75,000 | 100 ₹500 Lowest |
| 2.00 | M&L for cutting holes of superficial area n,exc 15 sqcm into or through brick walls built, in cement mortar or cement lime mortar and making good in cement concrete 1:2:4 as required, complete all as specified and directed by Engr-in-Charge. | 18 | Per CM of Depth | 5,000 ₹90,000 | 100 ₹1,800 Lowest |
| 3.00 | M&L for rendering 15 mm thick cement plaster in CM 1:4 on brick/stone or concrete surfaces on wall finished even and fair without using extra cement incl taking down existing plaster, complete all as specified and directed by Engr-in-Charge. | 12 | Sqm | 50,000 ₹6,00,000 | 300 ₹3,600 Lowest |
| 4.00 | M&L for preparation of new surfaces and applying two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces, complete all as specified and directed by Engr-in-Charge. | 12 | Sqm | 5,444 ₹65,328 | 80 ₹960 Lowest |
| 5.00 | Providing and fixing powder coated aluminium work for doors, windows, ventilators and partitions frame for openable or sliding windows (3 tire track) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete all asspecified and directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately). | 30 | Kg | 5,000 ₹1,50,000 | 600 ₹18,000 Lowest |
| 6.00 | Providing and fixing powder coated aluminium work for openable or sliding shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings i.c handles, tower bolts, rollers wherever required including the cost of EPDM rubber / neoprene gasket for glazing/gauging and filling up the necessary gaps at junction wherever required incluing CP brass/stainless steel screws complete all as specifed and directed by Engr-In-Charge. Note:- Powder coating shall not be less that 50 micron & Glazing, panelling & dash fasteners shall be paid seperately. | 26 | Kg | 15,000 ₹3,90,000 | 600 ₹15,600 Lowest |
| 7.00 | Providing and fixing glazing with 4 mm thick float glass fanes in aluminium door, window and ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc., complete all as specified and directed by Engr-in-Charge. | 4 | Sqm | 1,00,000 ₹4,00,000 | 600 ₹2,400 Lowest |
| 8.00 | S&F for Stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples, complete all as specified and directed by Engr-in-Charge. | 4 | Sqm | 15,000 ₹60,000 | 600 ₹2,400 Lowest |
| 9.00 | Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc., complete all as specified and directed by Engr-in-Charge. | 15 | Kg | 15,000 ₹2,25,000 | 600 ₹9,000 Lowest |
| 10.00 | Cutting and screwing existing steel water tubing for alteration or addition of 20 mm bore, complete all as specified and as directed by Engineer-in-Charge. | 2 | Each | 15,000 ₹30,000 | 100 ₹200 Lowest |
Tender Value
₹1.7 L
EMD Value
₹3,500
Closing Date
22 Sept 2025, 6:00 pmClosed
Sh K K Soni AE (Civ) AGE I R and D Manali
AGE I R AND D MANALI PIN 175103 PH 01902255014
SPECIAL REPAIR/REPALCEMENT OF WINDOWS AT BLDG NO C-16 AT DGRE MANALI AND PROVN OF 01X GYSER FOR BLDG NO T-88/B1 and T-88/B2 AT PALCHAN UNDER AGE (I) R and D MANALI
2025_MES_727112_1
AGE(I)/MNL-59/2025-26
Open Tender
Civil Works
Item Rate
90 days
DGRE and Palchan
As per NIT and tender documents
5 documents required · 5 mandatory
₹300
AGE I R AND D MANALI
₹3,500
Yes
18 Oct 2025
21 Aug 2025
25 Sept 2025
21 Aug 2025
22 Sept 2025
4 Sept 2025
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .