Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹7.8 LAccepted-AOC | ₹7.8 L | L1 | Accepted-AOC Lowest bidder |
| 2 | L2₹12.9 LRejected-Finance 529 RAM BAGH ROAD AMBALA CANTT 133001 HR | AMBALA | HARYANA | 133001 | ₹12.9 L | L2 | Rejected-Finance Unsuccessful bidder |
| Sl No | Description | Qty | Unit | RK STEEL FABRICATORs L2 | M/s Brahamaputra Wood Industries L1 |
|---|---|---|---|---|---|
| 1.00 | FD/E6/MAP/07 : Bath Mat PVC -
Size- 400 x 390 x 250 mm.
Body- Body of Bath mat shall be made with minimum 5 mm thick PVC sheet. Leg of bath mat shall be covered with rubber shoes.
Rest- All as per drg. | 34 | Nos | 800 ₹27,200 | 225 ₹7,650 |
| 2.00 | FD-357 : Chair Dining Long Back -
TIMBER- All wood work shall be of first class hard wood (teak).
FOAM- Seat shall be 75mm thick 36 density foam covered with leathrite foam.
Shoe- Hard PVC ring 20mm dia shall be screwed to the bottom of the legs.
POLISH- All expose wooden surface shall be French polish glossy finish.
Body- Over all size shall be 450 mm wide at bottom of legs level and 455 mm deep and 1200 mm high. Front two legs shall be of 25 mm x 50 mm in section and 450 mm high. The rear legs shall be out of 65 mm x 50mm made to shape as shown or drg. The front and rear legs at seat level shall be joined by 40 mm x 20 mm in section side rails provided at 450 mm from bottom legs. The top of side rails shall be at 450mm from bottom of legs. Two side stiffners of 25 mm x 40 mm in section shall be provided joining front and rear legs. The bottom of side stiffners shall be 100 mm above the bottom of legs. A middle stiffner of 25 mm x 40 mm in section joining the side stiffners in the middle shall provided as shown of as shown or drg. For seat cushion a frame shall be made with 75 mm x 20 mm in sector front and rear wooden horizontal rails joined by 40 mm x 20 mm in section wooden side rails 70 mm x 10 mm batten shall be provided with three equal gaps as shown on drg. Rails of 45 mm x 25 mm in sector shall be 40 mm apart from legs and joined by10 mm dia teak wood in vertical (Two in numbers) and 12 mm dia teak wood in horizontal (Four in numbers). Back shall have vertical battens 20 mm x 25 mm in section and 12 mm thick plywood commercial.
REST- All as shown on drawing. | 7 | Nos | 5,900 ₹41,300 | 3,100 ₹21,700 |
| 3.00 | FD-358 : Chair Easy Cushioned -
Timber- All wood work shall be first class hard wood teak.
FOAM- Seat shall be 75mm thick 36 density foam covered with leathrite foam.
Shoe- Hard PVC ring 20mm dia shall be screwed to the bottom of the legs.
POLISH- All expose wooden surface shall be French polish glossy finish.
Body- Front legs shall be 70 mm x 25 mm in section 520 mm high. Rear legs shall be of 70 mm x 25 mm in section slanting 185 mm horizontally in the height of 490 mm Front and rear rails shall be provided below the seat joining front legs and rear legs. Front legs shall be 510 mm apart and rear legs shall be 480 mm . The top of front legs shall have wooden arm rest of 65 mm x 25 mm in section and 610 mm long made to shape as shown on drg. The legs shall be joined by side rails of 70 mm x 25 mm in section teak wood. The side frame of back rest shall be of 70 mm x 25 mm in section joined with seat rear legs as shown on drg and fixed back support of 55 mm x 20 mm in section fixed horizontally between side frames of back rest 3 mm thick plywood commercial shall be fixed over the wooden frame of back rest.
REST- All as shown on drawing. | 29 | Nos | 4,000 ₹1.2 L | 2,800 ₹81,200 |
| 4.00 | FD/E6/MAP/12 : Chair Writing Steel-
Colour- Bright Blue for seat and back
REST- All as shown on drawing. | 44 | Nos | 2,500 ₹1.1 L | 2,100 ₹92,400 |
| 5.00 | FD/E6/MAP/05 : Chair School w/Hand Board-
Colour- Bright Blue or Red for moulded seat
Hand Board- Should be 18mm thickness prelaminated particle board of high quality with proper wooden beading
REST- All as shown on drawing. | 25 | Nos | 2,000 ₹50,000 | 1,600 ₹40,000 |
| 6.00 | FD/MAP-II/01 : Charpoy MS Tubing Ply Top-
PIPE- Conduit pipe 32mm sq. 1.6mm th. for legs , 65mmx25mm rectangular 1.6mm th for long rails and short rails, 25mm sq. Stiffeners under 12mm plywood and stiffeners between legs to the short side shall be used. 4mm th MS plate shall be welded at bottom of the legs.
PLYWOOD- 12mm commercial plywood IS-303 (BWR) grade for the top shall be fixed with round head nut & bolt.
FINISH- All steel work shall be two coat of black spray painting over a coat of red primer.
REST- All as shown on the drawing. | 13 | Nos | 4,000 ₹52,000 | 2,700 ₹35,100 |
| 7.00 | CWE/TEZ/FD-04 : Charpoy MS Tubing with Plywood Top-
PIPE- Conduit pipe 32mm sq. 1.6mm th. for legs , 65mmx25mm rectangular 1.6mm th for long rails and short rails, 25mm sq. Stiffeners under 12mm plywood and stiffeners between legs to the short side shall be used. 4mm th MS plate shall be welded at bottom of the legs.
PLYWOOD- 12mm commercial plywood IS-304 (BWR) grade for the top shall be fixed with round head nut & bolt.
Particle Board- Should not below 18mm thickness and should be prelaminated and high quality
FINISH- All steel work shall be two coat of black spray painting over a coat of red primer.
REST- All as shown on the drawing. | 21 | Nos | 4,050 ₹85,050 | 3,300 ₹69,300 |
| 8.00 | FD/E6/MAP/13 : Recepticle PVC-
Colour- Bright Red, Blue, green.
RECEPTACLE- Receptacle shall be covered with lid and handle. | 8 | Nos | 600 ₹4,800 | 400 ₹3,200 |
| 9.00 | FD/MAP-II/02 : Sofa 5 Seater w/Cushion-
Timber- All wood work shall be first class hard wood teak.
Cushion- 100 mm thick cushion of 36 density of 530 mm x 500 mm covered with best quality tapestry cloth with zipper fecility
Shoe- Hard PVC ring 20mm dia shall be screwed to the bottom of the legs.
POLISH- All expose wooden surface shall be French polish glossy finish.
PLYWOOD- 12mm commercial plywood IS-304 (BWR) grade for the seat and back
Body- The set consists of one long piece of three seat and two small pieces of one seat each.
REST- All as shown on drawing. | 8 | Set | 35,000 ₹2.8 L | 18,500 ₹1.5 L |
| 10.00 | FD-281 : Sofa 4 Seater w/Cushion-
Timber- All wood work shall be first class hard wood teak.
Cushion- 100 mm thick cushion of 36 density of 530 mm x 500 mm covered with best quality tapestry cloth with zipper fecility
Shoe- Hard PVC ring 20mm dia shall be screwed to the bottom of the legs.
POLISH- All expose wooden surface shall be French polish glossy finish.
PLYWOOD- 12mm commercial plywood IS-304 (BWR) grade for the seat and back
Body- The set consists of four small pieces of one seat each.
REST- All as shown on drawing. | 1 | Set | 30,000 ₹30,000 | 16,000 ₹16,000 |
Updated dates
Tender Value
₹14 L
EMD Value
₹28,000
Closing Date
10 Feb 2026, 6:00 pmClosed
CWE Tezpur
HQ CWE TEZPUR PO DEKARGAON DIST SONITPUR PIN 784501 (ASSAM)
PROVN OF NEW FURNITURE AND SPL REPAIR / REPLACEMENT OF MISCELLANEOUS FURNITURE UNDER GE (N) TEZPUR
2026_MES_748304_1
8254/TEZ(N)/E8
Open Tender
Miscellaneous Works
120 days
Solmara
Please refer Tender documents.
8 documents required · 8 mandatory
₹500
GE (N) Tezpur
₹28,000
Yes
9 Mar 2026
13 Jan 2026
16 Feb 2026
13 Jan 2026
10 Feb 2026
27 Jan 2026
FD/E6/MAP/07 : Bath Mat PVC - Size- 400 x 390 x 250 mm. Body- Body of Bath mat shall be made with minimum 5 mm thick PVC sheet. Leg of bath mat shall be covered with rubber shoes. Rest- All as per drg.
FD-357 : Chair Dining Long Back - TIMBER- All wood work shall be of first class hard wood (teak). FOAM- Seat shall be 75mm thick 36 density foam covered with leathrite foam. Shoe- Hard PVC ring 20mm dia shall be screwed to the bottom of the legs. POLISH- All expose wooden surface shall be French polish glossy finish. Body- Over all size shall be 450 mm wide at bottom of legs level and 455 mm deep and 1200 mm high. Front two legs shall be of 25 mm x 50 mm in section and 450 mm high. The rear legs shall be out of 65 mm x 50mm made to shape as shown or drg. The front and rear legs at seat level shall be joined by 40 mm x 20 mm in section side rails provided at 450 mm from bottom legs. The top of side rails shall be at 450mm from bottom of legs. Two side stiffners of 25 mm x 40 mm in section shall be provided joining front and rear legs. The bottom of side stiffners shall be 100 mm above the bottom of legs. A middle stiffner of 25 mm x 40 mm in section joining the side stiffners in the middle shall provided as shown of as shown or drg. For seat cushion a frame shall be made with 75 mm x 20 mm in sector front and rear wooden horizontal rails joined by 40 mm x 20 mm in section wooden side rails 70 mm x 10 mm batten shall be provided with three equal gaps as shown on drg. Rails of 45 mm x 25 mm in sector shall be 40 mm apart from legs and joined by10 mm dia teak wood in vertical (Two in numbers) and 12 mm dia teak wood in horizontal (Four in numbers). Back shall have vertical battens 20 mm x 25 mm in section and 12 mm thick plywood commercial. REST- All as shown on drawing.
FD-358 : Chair Easy Cushioned - Timber- All wood work shall be first class hard wood teak. FOAM- Seat shall be 75mm thick 36 density foam covered with leathrite foam. Shoe- Hard PVC ring 20mm dia shall be screwed to the bottom of the legs. POLISH- All expose wooden surface shall be French polish glossy finish. Body- Front legs shall be 70 mm x 25 mm in section 520 mm high. Rear legs shall be of 70 mm x 25 mm in section slanting 185 mm horizontally in the height of 490 mm Front and rear rails shall be provided below the seat joining front legs and rear legs. Front legs shall be 510 mm apart and rear legs shall be 480 mm . The top of front legs shall have wooden arm rest of 65 mm x 25 mm in section and 610 mm long made to shape as shown on drg. The legs shall be joined by side rails of 70 mm x 25 mm in section teak wood. The side frame of back rest shall be of 70 mm x 25 mm in section joined with seat rear legs as shown on drg and fixed back support of 55 mm x 20 mm in section fixed horizontally between side frames of back rest 3 mm thick plywood commercial shall be fixed over the wooden frame of back rest. REST- All as shown on drawing.
FD/E6/MAP/12 : Chair Writing Steel- Colour- Bright Blue for seat and back REST- All as shown on drawing.
FD/E6/MAP/05 : Chair School w/Hand Board- Colour- Bright Blue or Red for moulded seat Hand Board- Should be 18mm thickness prelaminated particle board of high quality with proper wooden beading REST- All as shown on drawing.
FD/MAP-II/01 : Charpoy MS Tubing Ply Top- PIPE- Conduit pipe 32mm sq. 1.6mm th. for legs , 65mmx25mm rectangular 1.6mm th for long rails and short rails, 25mm sq. Stiffeners under 12mm plywood and stiffeners between legs to the short side shall be used. 4mm th MS plate shall be welded at bottom of the legs. PLYWOOD- 12mm commercial plywood IS-303 (BWR) grade for the top shall be fixed with round head nut & bolt. FINISH- All steel work shall be two coat of black spray painting over a coat of red primer. REST- All as shown on the drawing.
CWE/TEZ/FD-04 : Charpoy MS Tubing with Plywood Top- PIPE- Conduit pipe 32mm sq. 1.6mm th. for legs , 65mmx25mm rectangular 1.6mm th for long rails and short rails, 25mm sq. Stiffeners under 12mm plywood and stiffeners between legs to the short side shall be used. 4mm th MS plate shall be welded at bottom of the legs. PLYWOOD- 12mm commercial plywood IS-304 (BWR) grade for the top shall be fixed with round head nut & bolt. Particle Board- Should not below 18mm thickness and should be prelaminated and high quality FINISH- All steel work shall be two coat of black spray painting over a coat of red primer. REST- All as shown on the drawing.
FD/E6/MAP/13 : Recepticle PVC- Colour- Bright Red, Blue, green. RECEPTACLE- Receptacle shall be covered with lid and handle.
FD/MAP-II/02 : Sofa 5 Seater w/Cushion- Timber- All wood work shall be first class hard wood teak. Cushion- 100 mm thick cushion of 36 density of 530 mm x 500 mm covered with best quality tapestry cloth with zipper fecility Shoe- Hard PVC ring 20mm dia shall be screwed to the bottom of the legs. POLISH- All expose wooden surface shall be French polish glossy finish. PLYWOOD- 12mm commercial plywood IS-304 (BWR) grade for the seat and back Body- The set consists of one long piece of three seat and two small pieces of one seat each. REST- All as shown on drawing.
FD-281 : Sofa 4 Seater w/Cushion- Timber- All wood work shall be first class hard wood teak. Cushion- 100 mm thick cushion of 36 density of 530 mm x 500 mm covered with best quality tapestry cloth with zipper fecility Shoe- Hard PVC ring 20mm dia shall be screwed to the bottom of the legs. POLISH- All expose wooden surface shall be French polish glossy finish. PLYWOOD- 12mm commercial plywood IS-304 (BWR) grade for the seat and back Body- The set consists of four small pieces of one seat each. REST- All as shown on drawing.
FD/E6/MAP/15(R) : Table Bedside MAP- Pipe- Pipe shall be used 18 x 18mm thick CR square pipe (18 Gauge) black powder coated. Top- Table top shall be 18mm thick prelaminated particle board with PVC bending fixed to frame with screws. Drawers- Drawers shall be made with telescopic channel along with 12mm thick BWR grade phenol bonded ply wood. Polish- All exposed wooden surfaces and teak veneered surfaces shall be french polished. Rest- All as shown on drawing.
FD/E6/MAP/16 : Table Dressing Gents MAP- As shown in drawing
FD/MAP/II/07 : Table Dressing Ladies incl Stool- As shown in drawing
FD-382 : Teapoy- Overall size : 600mm x 450mm x 540mm Timber- All wood work shall be first class hard wood teak free from knots and cracks. Shoe- Hard PVC ring 20mm dia shall be screwed to the bottom of the legs. POLISH- All expose wooden surface shall be French polish glossy finish. Body - Top shall be made out of 18/19mm thick pre-laminated particle board BWR exterior grade of mela mine faced, flat pressed 03 layered, ISI marked, one side teak finish and other side with white balancing laminlation (PLA) with 4mm thick teak wood edging all around the top of teapoy. REST- All as shown on the drawing.
FD-220 : FMN Set- Type - 'U' FINISH- All steel work shall be two coat of black spray painting over a coat of red primer. REST- All as shown on the drawing.
FD-1032 : Almirah Steel Medium- Overall size : 760mm x 440mm x 1270mm. Body : Top, sides, bottom, back, shelves and legs of Almirah steel med shall be made out of 1mm thick MS sheet.Three Nos shelves equally spaced shall be provided to make four compartment.Two Nos front shutter made out of 1mm thick MS sheet shall be provided having one chromimum plated steel handle of size 100mm with a locking device. All joints, welding and fixing shall be done in accordance with the standard workmanship FINISH- All steel surfaces internally and externally, shall be given two coats enamel synthetic OG paint over a coat of red oxide after preparation of steel surfaces with spray machine. REST- All as shown on drawing.
FD-253 : Peg Set of 6- Timber- All wood work shall be first class hard wood teak free from knots and cracks. POLISH- All expose wooden surface shall be French polish glossy finish. Peg - Made of Brass REST- All as shown on drawing.
FD/E6/MAP/08(R) : Bed hard - PIPE- Conduit pipe 32mm sq. 1.6mm th. for legs, 65mmx25mm rectangular 1.6mm th for long rails and short rails, 25mm sq. Stiffeners under plywood and stiffeners between legs to the short side shall be used. 4mm th MS plate shall be welded at bottom of the legs. PLYWOOD- 12mm commercial plywood (No of Ply - 07) IS-303 (BWR) grade for the top shall be fixed with round head nut & bolt. Particle Board - 18/19mm thick prelaminated particle board BWR exterior grade of melamine faced, flat pressed, 03 layered, ISI Marked. FINISH- All steel work shall be two coat of black spray painting over a coat of red primer. REST- All as shown on the drawing.
FD-229 : Chair Easy- Timber- All wood work shall be first class hard wood teak free from knots and cracks. FOAM- Seat shall be 75mm thick 36 density foam covered with leathrite foam. Shoe- Hard PVC ring 20mm dia shall be screwed to the bottom of the legs. POLISH- All expose wooden surface shall be French polish glossy finish. Cane - Plastic cane should be best quality of white cane 2mm wide and 0.4mm thick half round without any joint, in Godrej pattern. (Make-Shah/Primier/Arya) REST- All as shown on drawing.
FD-384 : Table Peg- Overall size : 450mm x 300mm x 380mm Timber- All wood work shall be first class hard wood teak free from knots and cracks. Shoe- Hard PVC ring 20mm dia shall be screwed to the bottom of the legs. POLISH- All expose wooden surface shall be French polish glossy finish. Body - Top shall be made out of 18/19mm thick pre-laminated particle board BWR exterior grade of mela mine faced, flat pressed 03 layered, ISI marked, one side teak finish and other side with white balancing laminlation (PLA) with 4mm thick teak wood edging all around the top of table peg. REST- All as shown on drawing.
FD-281 : Sofa 02 seater (1 + 1) - Timber- All wood work shall be first class hard wood teak. Cushion- 100 mm thick cushion of 36 mm densaity of 530 mm x 500 mm covered with best quality tapestry cloth with zipper fecility Shoe- Hard PVC ring 20mm dia shall be screwed to the bottom of the legs. POLISH- All expose wooden surface shall be French polish glossy finish. PLYWOOD- 12mm commercial plywood IS-304 (BWR) grade for the seat and back Body- The set consists of two small pieces of one seat each. REST- All as shown on drawing.
FD 274 : Table centre Two tier- Overall size : 900mm x 450mm x 400mm Tier - 02 Timber- All wood work shall be first class hard wood teak free from knots and cracks. Shoe- Hard PVC ring 20mm dia shall be screwed to the bottom of the legs. POLISH- All expose wooden surface shall be French polish glossy finish. Body - Top shall be made out of 18/19mm thick pre-laminated particle board BWR exterior grade of mela mine faced, flat pressed 03 layered, ISI marked, one side teak finish and other side with white balancing laminlation (PLA) with 4mm thick teak wood edging all around the top of table Center 2 tier. Rest- All as shown on drawing.
FD-275 : Table Writing- Overall size : 1145mm x 600mm x 7600mm. Timber- All wood work shall be first class hard wood teak free from knots and cracks. Shoe- Hard PVC ring 20mm dia shall be screwed to the bottom of the legs. POLISH- All expose wooden surface shall be French polish glossy finish. Body : Top shall be made out of 18/19mm thick pre-laminated particle board BWR exterior grade of mela mine faced, flat pressed 03 layered, ISI marked, one side teak finish and other side with white balancing laminlation (PLA) with 4mm thick teak wood edging all around the top of table writing. One cabinet and a drawer shall be provided in right side of table of size 600mm long 400mm wide and 580mm depth. Sides, front , shutter, shelves of cabinet and drawer shall be made out of 18mm thick prelaminted particle board and back shall be provide 6mm thick commercial plywood. 4mm teak wood edging shall be provide alround the front shutter and drawer and shutter be fixed with piano type continous hinges. All fittings recessed handle and locking device shall be provided to drawers and shutters.
NOTE : (Applicable for all items):- (i) The bidders/contractors are advised to read relevant Contract drawings and Particular specifications, Key specifications, Special conditions and General conditions of Contracts before entry/quoting the rates. (ii) The items are to be manufactured as per relevant drawings and specifications and supplied to the Department.
Please Enable Macros to View BoQ information
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.30 MB
105tenderdocus.pdf
Tender Documents • 0.69 MB
BOQ_838001.xls
BOQ • 0.33 MB
Download all tender documents and submit your bid