SPECIAL REPAIR TO BLDG NO SP-128 (JCOs LIVING ACCN) FOR INF DIV SIG REGT AND REPAIR TO BLDG NO T-50 AND T-96 AT BARAMULLA UNDER GE 969 EWS

Amount

Dismantling, floor, hearth or wall tiling including CM(bedding (but not backing), removing serviceable tiles to store & rubbish off the premises complete all as specified.

S&F light shade Vitrified Ceramic tiles 10mm thick (square/rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm thick screed in CM(1:6) complete all as specified.

S&F Coloured Non Skid ceramic tiles 7 to 8mm thick (squares/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm thick screed in CM(1:6) complete all as specified.

S&F Coloured Glazed ceramic tiles in vertical surfaces 350x250mmx7mm/450x350x7mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match over 10mm thick plaster in CM(1:4) on fair face of brick or concrete surface complete all as specified.

S&F in repairs Vitreous China wash basin, white/coloured, flat back, size 550x400mm excluding taps, waste chain & plug & porcelain stopper but including brackets complete all as specified.

S&F in repair brass CP mixer 3 in 1 for mixing hot & cold water screwed down for iron pipe and fixed complete all as specified.

S&F PVC connections 15mm size with PTMT nuts of length 450mm complete all as specified.

M&L PVC (SWR) multifloor trap 75mm dia with grating including jointing with solvent cement complete all as specified.

S&F in repairs 125mm size brass chromium plated shower rose with or without swivel joints any size including fixing to steel pipe or union complete all as specified.

Taking up or down 15mm bore of pipe steel tubing and connections, including cleaning for re-fixing or removal to store and S & F 15 mm dia GI tubing medium grade with all fittings and fixed to walls or laid in floors complete all as specified and directed.

Taking up or down 20mm bore of pipe steel tubing and connections, including cleaning for re-fixing or removal to store and S & F 20 mm dia GI tubing medium grade with all fittings and fixed to walls or laid in floors complete all as specified and directed.

Dismantling boarding, any description, fixed in any position with nails

S&F 4mm thick veneered decorative plywood on wall, grade-I (with BWR resin) with decorative face veneers on one faces, fixed with nails. Complete all as specified and directed by Engineer-in-charge.

S&F 4mm thick veneered decorative plywood on ceiling, grade-I (with BWR resin) with decorative face veneers on one faces, fixed with nails. Complete all as specified and directed by Engineer-in-charge.

Dismantling in fillets, rails, posts, rafters, purlins etc under 40 sqcm in section.

S&F Second class soft wood exc 13 & nexc 25 sqcm in plain fillets, square, rectangular or triangular in section, clean sawn secured with nails or brads complete all as specified.

S&F Second class soft wood exc 6 & nexc 13 sqcm in bullnosed, splayed, chamfered or rounded on one edge or face plain fillets, square, rectangular or triangular in section, clean sawn secured with nails or brads complete all as specified.

Dismantling timber scantling 40 scm and over in section in any position.

M&L Second class soft wood timber fixed in scantling.

Taking down & Removing to Store Chowkats or frames not exc. 1.5 sq. m each with shutters (without taking off shutters from the frames) complete all as specified.

S&F Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails, M.S. frame shall be covered with heat moulded plain colour PVC `C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles & wood grain printed PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of wood grain printed PVC sheet to be fitted in the M.S frame welded/ sealed to the 5mm thick x15mm wide decorative PVC beading of 10mm x 10mm (90 degree) , & joined together with solvent cement, in the frame at site as per specification & drawing.

S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S Square tube, in opening as per specification & drawing

S&F stainless steel Butt hinges 100mm size.

S&F Aluminium, anodised, barrel tower bolts 150mm long of extruded section.

Applying two coats of cement base paint, white or tinted on old wall surface including preparation of surface complete all as specified.

Dismantling Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof covering complete all as specified.

S&F pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall fixed with self tapping screws as specified

S&F in repair soap dish, chromium plated, fixed to plugs with chromium plated brass screws. Complete all as specfied and as directed.

S&F in repair CP towel rail 60cm long fixed with stainless steel screws. Complete all as specified and as directed by Engr-in-charge.

S&F pre-painted galvalume aluminium zinc coating GI based plain sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall fixed with self tapping screws as specified.

S&F in repairs CP Pillar taps fancy type 15 mm bore, cast cooper alloy, with capstan heads screwed down high pressure with or without lettered 'Hot' or 'Cold' with long screwed shanks & fly nuts, screwed for iron pipe

S&F in repair angle valve 15 mm bore fancy type, CP with long shank & cup (conncelaed type), cast copper alloy screwed down high presure, with crutch of butterfly handle, screwed both ends for iron pipe or for unions complete all as specified.

S&F in repair CP towel rail 60cm long fixed with stainless steel screws. Complete all as specified and as directed by Engr-in-charge.

Taking down shutter of any description exc 1 sqm and nexc 2 sqm each.

S&F 2nd class soft wood 35 mm thick Plain, framed, panelled shutters of factory made (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers; supplied and fitted to chowkats complete all as specified and directed

S&F 2nd class softwood 35mm thick Glazed & skeleton shutters, open rebated & prepared to receive glass, gauze, etc. (without sash bars), edge of framing plain, chamfered or rounded, fitted with cut & mitred beds for securing glass, etc.; sizes of members of windows, ventilators, etc. are provided with stiles & rails as specified in SSR Part I, Section 8 clause 8.20 (b); to chowkats

S&F Aluminium, anodised, barrel tower bolts 200mm long of extruded section.

S&F Aluminium alloy, anodised, sliding door bolt 300mm long with hasp, staple (bolt type) & fixing clips of sheet, cast or extruded sections & fixing bolts & sliding bolts of extruded sections or cast aluminium alloy.

S&F Aluminium handles 150mm size, cast type, anodised

S&F Butt hinges 100mm size, medium weight, cold rolled mild steel.

Taking down shutters of any description nexc 1.00 sqm each.

S&F Second class soft wood 30mm thick Glazed & skeleton shutters, open rebated & prepared to receive glass, gauze, etc. (without sash bars), edge of framing plain, chamfered or rounded, fitted with cut & mitred beds for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8. clause 8.20 (a); to chowkats

S&F Butt hinges 50mm size, medium weight, cold rolled mild steel.

S&F Aluminium, anodised, barrel tower bolts 100mm long of extruded section.

S&F Aluminium handles 100mm size, cast type, anodised

S&F Sheet glass 4.0mm thick, ordinary quality & glazing with oil putty in square n exc 0.5 sq.m in each pane complete all as specified.

S&F Stainless steel wire cloth, 0.36mm nominal dia of wire & average width of aperture 1.40mm with stainless steel wire staples

Applying two coats of synthetic enamel paint on wooden surfaces of any description, not otherwise, described, over 10cm width or girth including preparation of new surface & applying one coat of pink primer complete all as specified.

Demolition of PCC in ground floors & pavings exc 15 cm thickness (below or above ground level) (unreinforced). Complete all as specified and directed.

M&L broken stone or boulders hardcore of gauge n exc 63mm, depositied, spread and levelled nexc 15cm thick, watered and rammed to a true surface complete all as specified.

M&L 75mm thick PCC type C-2, (1:3:6) (using 40mm graded crushed stone aggregate),as in sub-base. Complete all as specified and directed.

M&L machine pressed precast coloured moulded concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60mm thickness M-35 Grade with grey cement and no pigment.

M&L for sand cushioning for interlocking tiles.

Demolition of PCC in ground floors & pavings n exc 15 cm thickness (below or above ground level) (unreinforced) complete all as specified.

M&L 25mm thick PCC type B-0, (1:2:4) (using 12.5mm graded crushed stone aggregate),as in flooring complete all as specified.

S&F in repair Vitreous China wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern & flush pipe) complete all as specified.

S&F in repairs Plastic water closet seat, black, closed pattern with flat bottom, & cover & mild steel CP or aluminised hinging device complete all as specified.

S&F in repairs PVC valveless, syphonic action type, flushing cistern 10 litr capacity, low level, white, with intel, ball valve, float & handle including brackets complete all as specified.

S&F in repairs angle valve/stop cock 15 mm bore fancy type, CP screwed down high presure, with crutch of butterfly handle, screwed both ends for iron pipe or for unions complete all as specified.

S&F in repairs flexible jet shower, 25mm dia including CP flexible pipe 1.20m long heavy duty and hook incl all necessary fittings complete all as specified and directed by Engineer-in-Charge.

S&F in repair Bib taps fancy type, cromimum plated, with crutch of butterfly handle, screwed and ffixed in 15mm bore pipe both ends for iron pipe or for unions

S&F Second class soft wood 25mm thick planed one side, with butt joints and fixed with nails.complete all as specified.

M&L for plywood grade BWR type BB 5 ply, 6mm thick fixed with screws to timber frame work.

S&F in repair for 8mm thick prelaminated wooden flooring including and laid over existing wooden planks surface by the manufacturer as approved by the GE in writing in a manner and providing the items as specified below (a) 125micron polythene sheet (as vapour barries) laid over exisiting wooden planks surface including taking all necessry steps to make the levelness and smoothness of existing wooden planks surface and achieve moisture free condition. (b) 5mm thick thermocole sheet over polythene sheet. (c) 8mm thick prelaminated wooden flooring. Make: Premium venyl flooring/Armstrong/Krishna Venyle Ltd New Delhi, Complete all as specified and and directed by Engr-in-Charge.

M&L precast cement concrete block fly ash block masonary with solid blocks exc 10cm in width and setting in cement mortar 1:6, type B-1, 1:2:4 (20mm graded aggregate) complete all as specified.

M&L 20 mm thick cement plaster (1:6) on fair faces of brick work or concrete surfaces. Complete all as specified and directed.

Applying one coat of synthetic enamel paint on wooden surfaces of any description, not otherwise, described, over 10cm width or girth including preparation of old painted surface complete all as specified.

Applying two coats of Distemper oil emulsion, white or tinted on old wall surface including preparation of surface.

Applying two coats of white wash on old Ceiling surface including preparation of surface.

Removing excavated soil material nexc 50m and depositing where directed at a level nexc 1.5m above the starting point.

Taking down PVC/CI pipes any type and size incl all fittings.

S&F PVC (SWR) pipes 75mm bore double socketed in any length with rubber ring joints fixed to walls

S&F PVC (SWR) pipes 110mm bore double socketed in any length with rubber ring joints fixed to walls

S&F PVC (SWR) bends any radius 75mm dia

S&F PVC (SWR) bends any radius 110mm dia

S&F Stack clamps out of 50mm by 5mm flat iron & 16mm dia round iron stays. Including bolts & nuts & securing ends of stays to wall or roof for 75 mm bore pipe complete all as specified.

S&F Stack clamps out of 50mm by 5mm flat iron & 16mm dia round iron stays. Including bolts & nuts & securing ends of stays to wall or roof for 110 mm bore pipe complete all as specified.

M&L 75mm thick PCC type C-2, (1:3:6) using 40mm graded stone aggregate as in plinth protection. (Note- Joints every corner and 2.00m distance filled with bitumen and sand mixed.

S&F in repairs CP centre hole mixer for Basin Hot & Cold water screwed down fo iron pipe and fixed for 15mm bore pipe complete all as specified and directed.

Taking down carefully copper/aluminum point wiring (light. Fan, socket or power) complete, incl fittings such as switches, ceiling roses, pendants, regulators, sockets etc, removing materials to store for keeping in safe custody for reuse at site and making good disturbed surfaces of walls, floors etc

M&L for point wiring in PVC casing caping with 1.5 Sqmm size multi stranded FRLS copper conductor cable 1.5 Sqm including clamps, screws guttier/plug etc PVC unsheathed cable into and including wooden board with bakelite sheet and PVC insulated FRLS cable of size 1.5 Sqmm as earth continuity conductor.

(a) One light point/fan point/Ex fan point controlled by one 5 Amps switch one way

(b) One 3 pin 5 Amp switch socket outlet on independent board

(c) One 3 pin 5 Amp switch socket outlet on same board with accessories

M&L for point wiring in PVC casing caping with 2.5 Sqmm size multi stranded FRLS copper conductor cable including clamps, screws guttier/plug etc PVC unsheathed cable into and including wooden board with bakelite sheet and PVC insulated fire retardant cable of size 2.5 Sqmm as earth continuity conductor.

S&F switch piano Flush type, single pole, one way 6 amp 240 volts, complete all as specified and as directed.

S&F Socket outlet 2 in 1, 3 pin, 5 Amps, flush type complete all as specified and as directed.

S&F Switch socket combination 2 in1, 3 pin,5 Amps and 15 Amp flush type,universal complete all as specified and as directed.

S&F in repairs stepped type electronic fan regulator for ceiling fan 1200/1400mm size 230 volts, 6 Amps, complete all as specified.

S & Fix Ceiling rose, 3 terminal/PVC/ polycarbonate, isolated body complete all as specified.

Supply and fixing LED lights fitting 1x 20 W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified.

Supply and fix exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 250mm complete all as specified.

S&F in repairs Double door metallic sheet metal enclosure for DB when MCBs to be used SPN 8 ways, 240 V with 200 Amps rated bus bar complete fixed properly on in concealed position and to provide required sizes of flexible conduit at any open surfaces near DBs of cables/wires all as directed.

S&F amp rating 240V, 10KA 'C' curve miniature circuit breaker (MCB) of SPN 40 to 63 AMP and current carrying capacity in the MCB DB complete with connection testing and commissioning.

All as per above item 95 but SP 5-32 Amps

S&F 1100 V grade heavy duty cable with pvc insulated aluminium conductor served with an inner sheathing of pvc tape and overall pvc sheathed in service connection suspended by insulating hangers not more than 1mtr apart including 4mm suspension wire one twin core cable flat or circular of size 16 SQMM all as specified and directed.

Supply and fix in repair electric water heater, storage type steel body with copper inner tank and heating element upto 2 KW capacity 25 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostate, NRV, connection piece etc complete all as specified.

S&F in replacement Steel Water Tubing of medium grade with all fitting laid in trenches/ floor/ duct/ ceiling/ wall for the bore of tube 20mm.

S&F in replacement Steel Water Tubing of medium grade with all fitting laid in trenches /floor/ duct/ ceiling/ wall for the bore of tube 25 mm.

Excavation in trenches n exc 1.5 m wide & n exc 1.5 mtr depth for foundation, etc or for shafts, wells, cesspits, manholes, pier holesetc not exc 10 sqm on plan and n exc 1.5 mtr in depth and getting our of soft/lose soil for taking out pipe & laying of pipe & getting our for diverting of CI pipeline complete all as directed

Removing excavated soil material nexc 50m and depositing where directed at a level nexc 1.5m above the starting point.

Returning, filling in including spreading, levelling, watering and well ramming in layers not exc 25cm in any type of soil.

S&F in replacement 20 mm Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed.

M&L for Steel Water Tubing of medium grade with all fitting laid in trenches/ floor/duct/ ceiling/wall for the bore of tube 15mm complete all as specified.

M&L for Bib taps, cast cooper alloy with crutch handle screwed down screwed for iron pipe or for brass ferrule and fixed for 20mm dia complete all as specified.

S&F for stop valves cast cooper alloy screwed down high pressure with crutch handle screwed both ends for iron pipe or for unions and fixed for fancy type chromium plated for bor dia of 20mm.

S&F PVC Connections but size 30mm long for hot/cold water complete with both end.

Earthing complete with galvanised steel earth plate, electrode, 600x600x6.0 mm thick burried directly in ground (earth pit not less than 2.25m deep below normal ground level) with top edge of the plate not less than 1.5 m below normal ground level connected to galvanized earth wire of 4 mm dia (up to 7.5 m in length from earth plate) by means of bolts and nuts checknuts and washers of galvanized iron or steel all as specified and shown in electrical plate no. 3 of SSR Part I including neccessary excavation and earth work in any type of soil PCC 1:3:6 type C1 chamber with RCC 1:2:4 type B1 40 mm thick cover with MS rod 8mm dia at 150mm c/c in both ways as reinforcement, water funnel, 20 mm dia light grade for protection of earth electrode, 20 mm dia Gl pipe light grade for watering complete all as specified and as directed by Engineer in charge and tested on completion. Note : The rate is inclusive of necessary earth work, RFR and removal etc

Supply and fixing ceiling fans complete with blades, down rods, electronic regulators and accessories, 230 V, 1200 mm Sweep. Min air delivery 210 CFM with service value 6.00 BEE, Five star rated with brushless direct current motor (BLDC)

Note:- Schedule of credit Rs. 97,350.00 will be deducted from total amount quoted while accepting the bid. Details of schedule of credit is given in tender documents.

M/S GHULAM HASSAN MALIK

M/S BHAT AND CO

MS DUTTA BUILDERS

M/S NISAR AND CO

M/S GHULAM QADIR WANI AND SONS

M/s Mohammad Shafi Malik

M/S KULWANT SINGH RAINA AND CO