PROVISION OF 36 SECURITY LIGHTS, ADDN/ALTN OF BUILDING NO P-89 AND SPECIAL REPAIR TO VARIOUS BUILDINGS OF SITE 1A AND 1B OF SU AT AF STN JODHPUR

Amount

Supply & fixing GI pipe bracket, made out of 40mm dia light grade GI pipe, fabricated into shape and size as required, not less than 1.2 metre long complete with two No MS clamps of MS flat iron 40mm x 6mm with bolts, nuts and washer fixed on poles/walls complete all as specified & directed by the Engineer-in-Charge.

Supply and fixing LED street light fitting 70 Watt 230 V AC outdoor type with high pressure die cast aluminum housing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 66 protection complete all as specified and directed by the Engineer-in-Charge.

Material & labour for point wiring for One light / fan point controlled by one switch 5 Amp, SP, one way 240 volts, with 1.5 sqmm (nominal area) FRLS PVC insulated and unsheathed multistranded copper conductor cable (using colour code as per IS) 1100 volts grade drawn through and including PVC casing caping (ISI marked), with all accessories including pressed steel terminal sunken boxes suitable for modular fittings including 1.5 sqmm size PVC insulated unsheathed FRLS copper conductor multistranded cable for continuous earth conductor to common earth and connecting to earth dolly, including making good of disturbed surface complete all as specified & directed by Engineer-in-Charge.

Supply & fixing modular switches 5 Amps single pole one way, one module, ISI marked complete all as specified and directed by the Engineer-in-Charge.

Supply & fixing modular white cover plate with frame 01 modular complete all as specified and directed by Engineer-in-Charge.

Material and labour for submain wiring with two single core PVC insulated multi stranded copper conductor cable FRLS of size 2.5 Sqmm 1100 volt grade (ISI marked ) drawn through and including PVC casing caping including necessary fittings and accessories like bends, tees and jointing plate to be fixed on surface of hanger or on cable tray, with and including one 1.5 Sqmm single core multi stranded copper conductor cable FRLS as earth continuity to common earth doly as earth wire all as specified and directed by the Engineer-in-Charge. Note : Two runs of main wire and one run of earth wire & one run of casing caping shall be measured and paid as one length.

Supply & fixing PVC two way MCB box for mounting 01 no MCB SPN 240 volts 10 Amp including necessary connection required complete all as specified & directed by the Engineer-in-Charge.

Supply and fixing Ceiling rose surfaces bakelite 65 x 20 mm white colour 02 to 03 terminals ISI marked complete all as specified and as directed.

Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials to store for keeping in safe custody or for taking credit and making good disturbed surfaces of walls, floors, etc. complete all as specified & directed by the Engineer-in-Charge.

Material & labour for point wiring for One light / fan point controlled by one switch 5 Amp, SP, one way 240 volts, with 1.5 sqmm (nominal area) FRLS PVC insulated and unsheathed multistranded copper conductor cable (using colour code as per IS) 650/1100 volts grade drawn through and including PVC conduit of thickness not less than 1.8 mm, concealed in wall with all accessories including pressed steel terminal sunken boxes suitable for modular fittings including 1.5 sqmm size PVC insulated unsheathed FRLS copper conductor multistranded cable for continuous earth conductor to common earth and connecting to earth dolly, including making good of disturbed surface complete all as specified & directed by Engineer-in-Charge.

All as per Item Ser No 10.00 here-in-before but for 5 amp socket on same board

All as per Item Ser No 10.00 here-in-before but for 5 amp socket on independent board

All as per item No. 10.00 here-in-before but with 2.5 Sqmm FRLS copper cable for independent 15 Amps socket outlet and including 1.5 Sqmm PVC insulated copper conductor unsheathed 1100 Volt grade IS-694 FRLS cable for continous earth wire complete all as specified and directed by the Engineer-in-Charge.

Supply & fixing modular socket outlet 6 Amp, 2/3 pin combined 2 module, 230 Volts AC ISI marked complete all as specified and directed by the Engineer in Charge.

Supply & fixing modular socket outlet 6/16 Amp, 2/3 pin combined 2 module, 230 Volts AC ISI marked complete all as specified and directed by the Engineer in Charge.

Supply & fixing modular switches 16 Amps single pole one way, one module, ISI marked complete all as specified and directed by the Engineer-in-Charge.

Taking down the existing unserviceable main switch / cut out / DBs of any type / capacity / description as existing at site including necessary making good the disturbed surfaces to match with the existing finishes Complete all as specified and directed by Engineer-in-Charge.

Supply and fixing stepped type modular fan regulator 2 module ISI marked complete all as specified & directed by the Engineer-in-Charge.

Taking down old tube light/sketch/ bulk head any type for replacement/ refixing and making good disturbed surfaces complete all as specified and directed by Engineer-in-Charge.

Supply and fixing LED lights fitting 1x 18 W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and as directed by Engr-in-Charge.

Material & labour for earthing complete with galvanised steel earth electrode 60cmx60cmx6mm buried directly in ground vertically to depth not less than 2.25m below normal ground level with top edge of the earth plate at a depth not less than 1.5m below ground level connected to and including GI earth lead wire 4.00 mm dia , by means of nuts, bolts, check nuts and washer etc, made of GI and connected to test point and earth dolly all as shown in electrical plate No. 3 SSR Part-I 2009 and specified or indicated including excavation and earthwork in any type of soil PCC (1:3:6) Type C1 in chamber, precast RCC 50 mm thick in cement concrete (1:2:4) type B1, reinforced with welded steel wire fabric or XPM (Weight not less than 4.00 Kg/Square metre) with cast iron frame, funnel with wire mesh, 20mm bore medium grade GI watering pipe, lugs, 15 mm bore medium grade GI protection pipe, test point etc. complete all as specified and directed. NOTE :- The rate of above Item includes the cost of earth lead and GI protection pipe up to 7.5 Metres. GI strip beyond 7.5 Metre shall be measured and paid for separately.

Supply & fixing DB SPN 08 way IP-43 protection, double door fixed on wall with incoming SPN 40 Amps 16 KA, 01 No and 06 (Six) Nos outgoing MCB SP 06 to 32 Amps C curve type including necessary connections complete all as specified & directed by the Engineer-in-Charge.

Excavation in trenches in HARD ROCK, not exceeding 1.5 metre wide and not exceeding 1.5 metre in depth, for foundation, etc. or for shafts, wells, cess pits, manholes, pier holes, etc not exceeding 10 square metre on plan and not exceeding 1.5 metre in depth and getting out complete all as specified and directed by the Engineer-in-Charge.

Supply & fixing modular white cover plate with frame 03 modular complete all as specified and directed by Engineer-in-Charge.

Supply & fixing modular white cover plate with frame 08 modular complete all as specified and directed by Engineer-in-Charge.

Dismantling Wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, including cover fillets complete all as specified & directed by the Engineer-in-Charge.

Supply and fixing anodised aluminium snap grid frame work for false ceiling Size of grid 605 x 605mm all as specified complete all as specified and as directed.

Supply & fixing 12 mm thick Perforated particle board/ tiles for insulation and accoustic purposes, 60x60 cm in size, fixed with nails to timber frame work or with staples on snap grid in ceilings complete all as specified & directed by the Engineer-in-Charge.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed by Engineer-in-Charge.

Material & labour for rendering 15 mm thick in cement mortar 1:4, on stone masonry surfaces or surface other than fair face of brick-work or on one side of lathing, surface finished fair and even as in backing coat complete all as specified & directed by the Engineer-in-Charge.

Material & labour for glazed ceramic coloured tiles, size exceeding 0.18 sqm but not less than 0.38 Sqm in area as approved and 7 to 8 mm thick, in vertical surface as in dado, set and jointed in neat cement slurry & pointed in white cement mixed with pigment to match with colour of tiles complete all as specified and as directed by the Engineer - in - Charge.

Taking down cement or cement lime plaster work any description from brick or stone wall etc. including raking out of joints, hacking for key, scrubbing down with water etc complete all as specified & directed by the Engineer-in-Charge.

Taking down chowkats or frames with shutters (without taking off shutters from the frames) exceeding 1.5 sqm but not exceeding 4 sqm each and removing from site complete all as specified & directed by the Engineer-in-Charge.

Supply and fixing frosted glass ordinary quality 12 mm thick in squares exceeding 0.5 sqm in each pane for the designer door, including stainless steel bracket and other suitable accessories complete all as specified & directed by the Engineer-in-Charge.

Supply and fixing 450 mm long stainless steel designer handle (minimum 25 mm dia) suitable for glass door with all fixing accessories complete all as specified & directed by the Engineer-in-Charge.

Supply & fixing aluminium die cast body door closer hydraulically regulated, designation No. 2, universal type, suitable for door shutters of 701 to 850 mm in width and of weight between 36 to 60 kg and fixed complete all as specified & directed by the Engineer-in-Charge.

Demolition of Brickwork or stone/boulder masonry, build in cement mortar including all quoins, arches, pillars etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified & directed by the Engineer-in-Charge.

Supply & fixing Harrison rails, mild steel, chromium plated with fixing brackets, stops, rollers etc complete all as specified and directed by the Engineer-in-Charge.

Material & labour for preparation of new plastered or unplastered surfaces of ceiling and applying two coats of oil emulsion distemper, white or tinted, including cleaning of windows, doors, internal fittings & any other surfaces by removing splashes / spots after finishing the job and leaving premises, clean and tidy complete all as specified and as directed by Engineer-in-Charge.

Demolition of cement concrete (unreinforced) of any description and in any position not otherwise specifically provided complete all as specified & directed by the Engineer-in-Charge.

Taking down old Tarfelt of exiting water proofing treatment on RCC roof surfaces including roughening surfaces of old concrete floor by picking, sweeping cleaning and washing down with water to remove dust, etc. including removing debris out side of MD land complete all as specified & directed by the Engineer-in-Charge.

Material & labour for 25mm thick PCC 1:2:4 type B0 (using 12.5mm graded stone aggregate) as in levelling course/ roof padding mixed with & including water proofing compound @ 3% by weight of cement , surfaces finished even and fair on roof / chajjas etc complete all as specified & directed by the Engineer-in-Charge.

Material & labour for Cutting out cracks to V-section in existing roofs or terracing, cleaning out, wetting, grouting with cement and sand slurry 1:3 with and including water proofing compound as per manufacturer's instruction complete all as specified & directed by the Engineer-in-Charge.

Material and labour for cutting grooves in stone/brick wall, 75mm wide and 65mm deep and shaping horizontal face of groove with cement mortar 1:3 complete all as specified & directed by the Engineer-in-Charge.

Material and labour for preparation of concrete surfaces and applying bituminous primer (conforming to IS : 3384-1965 ) @ 0.40 Kg/Sqm complete all as specified & directed by the Engineer-in-Charge.

Material & labour for applying evenly a tack coat of industrial bitumen of grade 85/25 @ 1.2 kg per sqm including cleaning surfaces (Ist coat for bonding material below membrane and IInd coat on top of membrane) complete all as specified & directed by the Engineer-in-Charge. Note:- Each coat shall be measured and paid seperately.

Supply and laying Atactic polypropylene modified polymeric standard membrane of minimum 3 mm thickness, weight not less than 3kg/sqm, reinforced with polyster non wove fabric (weight not less than 150 gms/sqm) laid on primed surface by forced application and finally finished with aluminium paint @ 0.20 litre per sqm complete all as specified & directed by the Engineer-in-Charge.

Material & labour PCC 1:2:4 type B1 (using 20mm graded stone aggregate) as in roof kerbs or mud stops, rounded or chamfered on edges, benching etc complete all as specified and directed by the Engineer-in-Charge.

Material & labour for 15 mm thick rendering in Cement Mortar 1:4 mixed with & including water proofing compound @ 3% by weight of cement, on concrete surfaces while concrete surface is green on roof, finishing even and smooth without using extra cement complete all as specified & directed by the Engineer-in-Charge.

Taking up or down steel tubing and connection including cleaning for re-fixing or removal to store for 15 mm bore pipe complete all as specified & directed by the Engineer-in-Charge.

Taking up or down steel tubing and connection including cleaning for re-fixing or removal to store for 20 mm bore pipe complete all as specified & directed by the Engineer-in-Charge.

Dismantling old unserviceable water storage tank (PVC/RCC/AC) of capacity exceeding 250 litres but not exceeding 500 litres complete all as specified & directed by the Engineer-in-Charge.

Dismantling old unserviceable water storage tank (PVC/RCC/AC) of capacity exceeding 500 litres but not exceeding 1000 litres complete all as specified & directed by the Engineer-in-Charge.

Supply & fixing 15mm bore, medium grade, galvanised iron pipe, with all fittings & fixed to walls & ceiling or laid in floor complete all as specified & directed by the Engineer-in-Charge.

Supply & fixing 20mm bore, medium grade, galvanised iron pipe, with all fittings & fixed to walls & ceiling or laid in floor complete all as specified & directed by the Engineer-in-Charge.

Supply & fixing rotational moulded polyethylene water storage tank of capacity 500 Litres (Cylindrical vertical with closed top), double layer construction, ISI marked hoisted & fixed in position including GI light grade 20mm dia over flow pipe 450mm long and waste pipe 600mm long with all fitting etc. etc complete all as specified & directed by the Engineer-in-Charge.

Supply & fixing rotational moulded polyethylene water storage tank of capacity 1000 Litres (Cylindrical vertical with closed top), double layer construction, ISI marked hoisted & fixed in position including GI light grade 20mm dia over flow pipe 450mm long and waste pipe 600mm long with all fitting etc. etc complete all as specified & directed by the Engineer-in-Charge.

Supply and fixing in repairs tank cover black (with arrangement for locking) of water storage tank of any capacity complete all as specified and as directed by the Engineer-in-Charge.

Supply and fixing in repairs Gun-metal, globe or gate valves of 20mm bore with half turn lever arm /iron wheel head, screwed both ends for iron pipe complete all as specified and as directed by the Engineer - in - Charge.

Supply & fixing in repairs 20mm bore ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe [Minimum weight for 20mm – 210 gms] complete all as specified and as directed by the Engineer - in - Charge.

Supply & fixing in repairs Stop valves 15 mm bore, cast copper alloy screwed down high presure, with crutch of butterfly handle, screwed both ends for iron pipe or for unions complete all as specified and as directed by the Engineer - in - Charge.

Demolition and breaking up 100/150 mm bore Asbestos Cement soil , waste and rain water pipes etc set in cement mortar, from walls or in floors, including connections and fittings complete all as specified and directed by the Engineer-in-Charge.

Supply & fixing 110 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to walls including clamps and other fixing accessories complete all as specified & directed by the Engineer-in-Charge.

Supply & fixing PVC (SWR) bend any radius, of 110 mm bore complete all as specified & directed by the Engineer-in-Charge.

Material and labour for mild steel bands, straps, supports or stays for rain water, ventilating pipes, including bolts, plate washers and similar small articles conforming to Fe-290 Gde-E-165 complete all as specified & directed by the Engineer-in-Charge.

Demolition of cement concrete (unreinforced) in ground floors and pavings not exceeding 15 cm thickness (below or above ground level) and disposing off debris properly outside MD land complete all as specified and as directed by the Engineer - in - Charge.

Material & labour for 25mm thick PCC 1:2:4 type B0 (using 12.5mm graded stone aggregate) as in levelling course, surfaces finished even and fair for laying floor finishes complete all as specified & directed by the Engineer-in-Charge.

Material and labour for 20-25mm thick machine cut kota stone slab flooring with Kota stone of size 550mm x 450 mm / 550mm x 550 mm, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing with bee wax polish laid over & including 15 mm thick screed bed or bedding layer in cement mortar (1:4) complete complete all as specified and directed by the Engineer-in-Charge.

Dismantling posts or struts (wood, steel or R.C.C.) any section, including taking out embedded portion in concrete, brick work, masonry, etc. and making good disturbed ground complete all as specified & directed by the Engineer-in-Charge.

Excavating in post holes (or similar holes) in any type of soil, each hole not exceeding 0.5 Cum, getting out, returning,filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, watering and remvoing surplus soil to a distance not exceeding 50m and making good surfaces complete all as specified & directed by the Engineer-in-Charge

Material & labour for PCC 1:4:8, type D-2, (using 40 mm graded stone aggregate), as in foundations, sub base, filling and mass concrete complete all as specified & directed by the Engineer-in-Charge.

Material & labour for Rolled mild steel work Fe-290 (Grade E- 165), as in fencing posts with or without Y/U/Swan Neck made of angle or other section, made to shape complete, welding, drilled for fixing or holding of barbed wire or concertina coil , etc. to be prepared for hanging or steel hanging fittings; also fastening and fixing complete all as specified & directed by the Engineer-in-Charge.

Material & labour for preparation of new or previously untreated steel surface of any description over 10 cm width and girth, not otherwise described and applying two coats of synthetic enamel paint over one coat of red oxide primer complete all as specified & directed by the Engineer-in-Charge.

Supply & fixing in repairs Galvanised 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. as directed (each line wire to be measured) complete all as specified & directed by the Engineer-in-Charge.

Material & labour for complete removal of old existing treatment of wall, ceiling, chajja and applying a coat of white cement base wall care putty in patches as required and as directed by Engineer in charge finished even and smooth with sand paper and applying two coats of exterior weather proof water base emulsion paint white or tinted including cleaning of windows, doors, internal fittings & any other surfaces by removing splashes / spots after finishing the job and leaving premises, clean and tidycomplete all as specified and as directed by the Engineer in charge. Note:- Quoted rate shall be deemed to be included for work in buildings/ structure of any height and any location.

Material & labour for preparation of newly plastered surfaces of wall ,ceiling ,chajja and applying two coats of exterior weather proof water base emulsion paint white or tinted including cleaning of windows, doors, internal fittings & any other surfaces by removing splashes / spots after finishing the job and leaving premises, clean and tidy complete all as specified and as directed by the Engineer in charge. Note:- Quoted rate shall be deemed to be included for work in buildings/ structure of any height and any location.

Taking down chowkats or frames with shutters (without taking off shutters from the frames) not exceeding 1.5 sqm each and removing from site complete all as specified & directed by the Engineer-in-Charge.

Supply & fixing factory made combined Steel windows with one side hung glazed shutters with glazing bars dovetailed or welded, and one side hung wire gauge shutters without glazing bars dovetailed or welded including box type hinges with steel handles and steel peg stays in both glazed and wire gauge shutters complete all as specified & directed by the Engineer-in-Charge.

Supply & fixing 4 mm thick ordinary quality sheet glass pane area exceeding 0.50 Sqm in each pane with necessary fittings and glazing with oil putty etc complete all as specified & directed by the Engineer-in-Charge.

Suppy & fixing in repairs stainless steel wire cloth, 0.36mm nominal dia of wire & average width of aperture 1.40mm & fixed with tinned tacks, or stainless steel wire staples complete all as specified & directed by the Engineer-in-Charge.

Material & labour for cement concrete 1:2:4 type B-1 (using 20 mm graded stone aggregate) as in surface channels and drains complete all as specified & directed by the Engineer-in-Charge.

Material and labour for Brickwork with sub class ‘B’ bricks straight or curved on plan exceeding 6 m mean radius, in cement mortar 1:4 complete all as specified and directed by the Engineer in Charge.

Material & labour for rendering 15 mm thick in cement mortar 1:4, on fair faces of brick work or concrete surfaces, surface finished fair and even as in backing coat complete all as specified & directed by the Engineer-in-Charge.

Material & labour for extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred/stopped ends etc. complete all as specified & directed by the Engineer-in-Charge.

Excavation in trenches in soft/loose soil, not exceeding 1.5 metre wide and not exceeding 1.5 metre in depth, for foundation, etc. or for shafts, wells, cess pits, manholes, pier holes, etc not exceeding 10 square metre on plan and not exceeding 1.5 metre in depth and getting out complete all as specified and directed by the Engineer-in-Charge.

Material & labour for squared rubble walling, Jodhpur type, brought upto courses, curved on plan to a mean radius not exceeding 6m, well bonded, bedded and solidly hearted, built in cement mortar 1:6 complete all as specified and directed by the Engineer-in-Charge.

Material & labour for rendering 15 mm thick in cement mortar 1:6, on stone masonry surfaces or surface other than fair face of brick-work or on one side of lathing, surface finished smooth and even without using extra cement complete all as specified & directed by the Engineer-in-Charge.

Material & labour for rendering 15 mm thick in cement mortar 1:4 with water proofing compound @ 3% by weight of cement, on stone masonry surfaces or surface other than fair face of brick-work or on one side of lathing, surface finished smooth and even without using extra cement complete all as specified & directed by the Engineer-in-Charge.

Material & labour for Reinforced cement concrete pipes 150mm dia, class NP2, laid & jointed complete with collars, in trenches complete all as specified and directed by the Engineer-in-Charge.

Material & labour for cement concrete 1:4:8 type D-2 (using 40 mm graded stone aggregate) as in bed to drain pipes of size 150 mm bore, including packing under & haunching against the sides of pipes after they are laid and tested complete all as specified and directed by the Engineer-in-Charge.

Returning, filling in, including spreading, leveling watering and well ramming in layers not exceeding 25 cm thick in any type of soil complete all as specified and as directed.

Removal of excavated soil/ material to a distance exceeding 250 metre but not exceeding 500 metre and depositing where directed at a level not exceeding 1.50 metre above the starting point complete all as specified and as directed.

Material & labour for cutting into existing manholes for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-1 (using 20 mm graded stone aggregate) smooth finished, and reforming benching as required, for 150 mm bore Internal dia of pipe complete all as specified & directed by the Engineer-in-Charge.

Material & labour for providing 50 mm thick sand stone slabs in man hole covers, sun shades, chajjas, shelves, cills, landings, cover stones, templates, etc. not exceeding 2m in length, punched dressed on face and along exposed edges, self faced on other side and set and pointed in cement mortar 1:4 complete complete all as specified & directed by the Engineer-in-Charge.

Material & labour for 75 mm thick PCC 1:3:6 type C-2 (using 20 mm graded stone aggregate) as in plinth protection, including surface finished even and smooth without using extra cement, laid in panels not exceeding 3 m long and joints shall be filled with the mixture of bitumen and sand in 1:3 by weight complete all as specified and as directed by the Engineer - in - Charge.

Material & labour for preparation of new plastered or unplastered surfaces of wall and applying two coats of oil emulsion distemper, white or tinted, over a coat of primer, including cleaning of windows, doors, internal fittings & any other surfaces by removing splashes / spots after finishing the job and leaving premises, clean and tidy complete all as specified and as directed by Engineer-in-Charge.

Material & labour for rendering 10 mm thick in cement mortar 1:4 on fair faces of concrete surfaces or stone patti on ceiling, surface finished smooth and even without using extra cement complete all as specified & directed by the Engineer-in-Charge.

Material & labour for preparation of new plastered or unplastered surfaces of ceilings and applying three coats of white lime wash including cleaning of windows, doors, internal fittings & any other surfaces by removing splashes / spots after finishing the job and leaving premises, clean and tidy complete all as specified and as directed by Engineer-in-Charge.

Material & labour for light coloured Non-Skid ceramic tiles 7 to 8mm thick (squares/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match, complete all as specified and as directed by the Engineer - in - Charge.

Material & labour for glazed ceramic coloured tiles of approved design and pattern, of size 450 mm x 350 mm x 7mm in vertical surface, set and jointed in neat cement slurry & pointed in white or coloured cement to match with colour of tiles complete all as specified and as directed by the Engineer - in - Charge.

Supply & fixing Steel ventilator with top hung shutter including hinges, steel peg stay, complete all as specified and directed by the Engineer in Charge.

Supply & fixing prelaminated flush shutters 30 mm thick, solid core construction, with block board core and plywood face panels, commercial type one side and other side is covered with decorative face veneer with lipping/frame to match complete all as specified & directed by the Engineer-in-Charge.

Supply & fixing 35 mm thick 2nd class Hard Wood Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. divided into squares, with plain, chamfered or rounded, mitred and rebated sash bars, any numbers and mitred beads for securing glass, wire guage etc.; sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24 (a) Kiln seasoned & chemically pressure treated complete all as specified & directed by the Engineer-in-Charge.

Supply & fixing framed work Fe-290 (Gde E-165) as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing including hinges and welding etc complete all as specified & directed by the Engineer-in-Charge.

Supply & fixing 125 mm long mild steel butt hinges, cold rolled, medium weight complete all as specified and as directed.

Supply & fixing aluminium anodisd barrel towel bolts of extruded section, fixed in position, length of bolt 150mm complete all as specified and as directed by the Engineer - in - Charge.

Supply & fixing aluminium powder coated handles extruded type anodised, of size 150 mm, complete all as specified and directed by Engineer-in-Charge.

Supply & fixing 250 mm long Aluminium alloy anodised sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections complete all as specified and as directed by the Engineer - in - Charge.

Supply & fixing floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring with overall length of cover plate 150 mm, fixed in floor complete all as specified and as directed.

Supply & fixing mild steel 300mm, ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and directed by the Engineer-in-Charge.

Supply & fixing factory made Solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. square tube fixed with 75 mm long MS screws with PVC fasteners to wall all including repair of jams of wall and finishes, fixing in opening as per specification & drawing complete all as specified and as directed by the Engineer-in-Charge.

Supply & fixing factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing complete all as specified and as directed by the Engineer-in-Charge.

Material & labour for preparation of new or previously untreated wooden surface of any description over 10 cm width and girth, not otherwise described, with filler coat with grey filler or liquid wood filler, transparent, and bringing forward surfaces to smooth even finish and applying two coats of synthetic enamel paint over one coat of pink primer complete all as specified & directed by the Engineer-in-Charge.

Supply and fixing in repairs vitreous china wash down water closet pan (pedestal pattern) white including PVC sheet cover, closed pattern with flat bottom, and cover and MS chromium plated hinging device and connection to drain pipe and anti syphonage pipe complete all as specified and directed.

Supply and fixing in repairs of vitreous china WHB white flat back size 550mmx400mm with new MS brackets excluding taps waste pipe & plug, but including MS bracket etc complete all as specified and directed.

Supply and fixing in repairs 15 mm dia bib taps, cast copper alloy, Chromium plated, fancy type screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for brass ferule and fixed complete all as specified and directed

Supply and fixing in repairs 15 mm dia angle valve, brass Chromium plated, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed

Supply and fixing in repairs CP waste coupling 32mm dia for steel sink / urinal/WHB etc with long shank and fly nuts complete all as specified and directed.

Supply and fixing in repairs PVC Flexible waste pipe 32 mm dia with socket for steel sinks/wash basins/urinals upto floor level and length not less than 0.60 meter complete all as specified and directed.

Supply and fixing in repairs PVC connection 15mm size with PTMT nuts of length 450mm complete all as specified and directed.

Supply and fixing grating doom 125 mm dia with waste hole of PTMT (Minimum weight 40gms) complete all as specified & directed by the Engineer-in-Charge.

Supply and fixing Towel Ring of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats (Minimum weight 90gms) complete all as specified & directed by the Engineer-in-Charge.

Supply and fixing in repairs Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete all as specified & directed by the Engineer-in-Charge.

Supply & fixing vitreous China bowl urinal flat back, size of 465 x 355 x 265 mm white (minimum), with grating and union for discharge pipe, spreader (excluding flushing cistern, flush pipe and waste pipe) complete all as specified & directed by the Engineer-in-Charge.

Supply and fixing in repairs PVC valveless, syphonic action type, flushing cistern 10 litres capacity, low level, white, with inlet, ball valve, float and handle including brackets complete all as specifed and directed.

Supply & fixing in repairs 15 mm bore fancy type overhead shower with arm swivel joint chromium plated screwed down complete all as specified & directed by the Engineer-in-Charge.

Taking down CI/PVC pipes (any size or pattern) including all fittings, heads, shoes, bends, swan necks etc (measured overall as fixed along the centre line over fittings and accessories) complete all as specified & directed by the Engineer-in-Charge.

Supply & fixing PVC (SWR) pipes 75 mm dia single socketed, in any length with or without ears rubber ring joints, laid in trenches or in floors complete all as specified and directed by the Engineer-in-Charge.

Supply & fixing PVC (SWR) pipes 75 mm dia single socketed, in any length with or without ears rubber ring joints, fixed to walls complete all as specified and directed by the Engineer-in-Charge.

Supply & fixing PVC (SWR) bend any radius of 75 mm bore provided with access door complete all as specified & directed by the Engineer-in-Charge

Supply & fixing PVC (SWR) branch piece of bore 75 mm dia, single (single T) equal or unequal with access door complete all as specified & directed by the Engineer-in-Charge.

Supply & fixing PVC (SWR) vent cowl of bore 75 mm dia complete all as specified & directed by the Engineer-in-Charge

Supply & fixing PVC (SWR) floor trap of 75 mm dia outlet, plain with grating including jointing with solvent cement including cutting out wall/concrete and finishing of surface to match existing surface complete all as specified & directed by the Engineer-in-Charge.

Supply & fixing Salt-glazed stoneware gully traps 100mm x 100 mm, square or round mouthed, type 'P complete all as specified & directed by the Engineer-in-Charge.

Demolition of Stone slabs and tiles of any description or thickness in floors, aprons etc. laid, bedded and pointed in any mortar complete all as specified & directed by the Engineer-in-Charge.

Supply and fixing in repairs sinks with drainage board made of stainless steel sheet 1mm thick (Grade SS- 304 ) for kitchen or laboratory with plugs, washers and wastes including bedding in cement mortar to dwarf wall or cantilever brackets and connecting union to pipe, overall size 915 x 460 mm, bowl size 410 x 330 x 160mm complete all as specified and directed.

MAA CHAMUNDA CONSTRUCTION & SUPPLIER

Keystone Constructionare