Providing Emenities to Ghee Block at Madanapalli Dairy in Annamayya District

Supply and fixing of Alluminium fixed glazing as per drawing using standard powder coated / anodised alluminium section of 190.50 x 40 mm x 3.18mm thick for top frame and section of 88.90 x 40mm 3.18 mm thick bottom frame fitted with 12mm thick Toughned glass glazing fitted with suitable Alluminium glazing chips and approved brand silicon sealent including cost and conveyance of all materials and all labour charges for manufacturing fixing in position using required numbers of screws, bolts and nuts and including labour charges for fixing the frame in position fixing glass to frame etc., complete for finished item of work.

Supply, Manufacturing and fixing of Cubboards made of 19mm thick ISI marked commercial Ply alround boxing verticals, Horizontals for covered with on exposed surfaces, externally and internally and each panel with 9 ply 19mm thick plywood and 9mm thick plw wood with Laminated sheets - MAT finish of 1.00mm thick to each shutter, consist of 6 Nos 100mm long powder coated tower bolt - 2nos, 200 mm long SS handles and other shutter will have 1 no of cupboard lock and 75mm long SS But hinges-3 Nos of each shutter. The above frame will be fixed to the wall with screws, the rate inclusive of screws, handle providing cement self sheets etc., complete for finished item of work.

Roofing With 0.5mm thick galvanized /pre painted G.I profiled sheets with crimp of 200mm length fixed to the purlins With 14 size self drilling with neoprene washer Side laps are stiched with self tapping drilling screws .End laps are to be sealed with 25x3 mm Butyl tape .the sheets are provided with anti capillary groove.including cost and labour charges etc., complete as per standard specification for finished item of work.

Supply and Fixing of MS Square pipe Purlins of size 50mm x 50mm x 3.00mm thick of 10.00 m long medium guage by welding of 6mm thick cleats of size 150mm x 65 mm on both sides of the pipes in position with necessary bolts and nuts washors including cost and conveyance of all materials to work site and all labour charges etc., complete for finished item of work

Supply and Fixing of MS Rectangle Rafters of size 80mm x 40mm x 3.20mm thick of 4.00 m long medium guage by welding of 6mm thick cleats of size 150mm x 65 mm on both sides of the pipes in position with necessary bolts and nuts washors including cost and conveyance of all materials to work site and all labour charges etc., complete for finished item of work

Supply and fixing in position M.Spipe square rods, angles etc., of approved design weighing, including necessary cuttings, bending, fabrication, welding grinding, and finishing smooth including cost of making holes in including cost and conveyance of all materials, labour charges for fabricating and fixing of steel works like Window Grills, Compound Wall Grills, Iron Doors, Windows including cost of welding rods, power chargesand all other incidental and operational charges etc., complete

Flooring with Non skide or white fully body ceramic floor tiles of size 600 x 600 and thickness 7 - 8 mm 1st quality, set over base coat of cement mortar (1:8), 12 mm thick over CC bed already laid or RCC roof slab, including neat cement slurry of honey like consistency spread @ 3.3.kgs per sqm & jointed neatly with white cement paste to full depth mixed with pigment of matching shade, including cost of all materials like cement, sand water and tiles etc., complete, including seigniorage charges, etc., complete for finished item of work, but excluding the cost of conveyance of all materials.

Supply and fixing of High Polished Granite 16 to 18 mm thick up to 2.43 M other than black/ premium colours etc., including cost and conveyance of all materials and all labour charges etc., complete.

Supply and fixing of Half Rounding the edges of Marble/ Granite stone slabs of all thicknesses including polishing the same etc., including cost and conveyance of all materials and all labour charges etc., complete.

Supply & Installation of 80 mm thk PUF(polyurathene) walls & partition panels manufactured in continous line,with 0.5mm thk PPGL (pre-painted galvalume ) with RMP (Regular modified Polyester ) coating external sheet /Internal with 0.5 TCT PPGI (Pre painted galvanised iron )with RMP(Regular modified Polyester ) coating & both sides PPGI/PPGI panels for partitions with density of 40+/-2 Kg /m3.with effective cover width of 1000mm -Pre-coated steel is of Z2 quality – Hot Dip Galvanized with Zinc Coating of 150 Gms / Sq.mts. off-white in color, with a coating thickness of 25 microns-consisting of 5 microns of Primer and 20 microns of finished coat. The reverse side has a Grey-backing coat of 5 microns, compatible for bonding of PUF.wall panels joint will be of tongue and grove joint.with flashings ,Accessories ,600RM -Tprofile for Suspension (MAKE -KINGSPANJINDAL/LLOYDS/METECNO)

Filling with carted earth free from admixture of foreign material in layers of 15cms. Thick, watering, tamping, including cost and conveyance of all materials to site from approved source, labour charges of all items of work and all incidental and operational charges etc., complete as per standard specification referred and direction of the departmental officers.

Supply of Pre cast Concrete Blocks for Paving of M-35 Grade and thickness not less then 60 mm for light traffice areas conforming to IS 15658 : 2006 in all shapes and designs as per the manufacturers specification and labour chrges for laying and fixing of precast blocks for paving of all grades ,any thickness ,all sizes & Shapes including all labour chrages for loading & Unloading ,laying to desired lines and levels etc., complete for finished items of work.

Providing soakpit for water rejumanation with coal, metal, sand etc., including cost and conveyance of all materials and all labour charges etc., complete.

Supply and transportation of following XLPE insulated, 1100V grade armoured aluminum cable as per specification confirming to IS:7098 (Part - I)./1554-I Makes: As per list of recommended brands as category I.MAT-03423

Supply, installation, testing and commissioning of cubical floor mounting type Sub power Distribution panel board (CS Panel) (400 A,36 KA 4 pole MCCB ) with alluminium bus bars fabricated with 14/16 Gauge CRCA Sheet in standard sections suitable for coupling at site comprising of TPN bus bars with bus bars of equal size in all phases and neutral equipped with bus bar chambers and cable chambers. The bus bars fault level shall be 50 KA and shall be as per the requirement of local CEIG, fire regulations, CPRI norms and other authorities etc. The painting of the complete system shall be powder coated duly processing the panel in 7 tank process The panel shall be suitable for accomdating the following switch gear including supply of all components, hard wares etc including all necessary civil works, adequate reinforcement foundation bolts, suitable G.I earth strip , Suitable MS base channel 75x40x5 MM 'C' Channel, door loop earthings , bus bars should be colour sleeved with heat shrinkable sleeves for phase and neutral duly supported at regular intervels by MC supports and bus bar to switch inter connections shall have bimettalic washers, and all cables shall have proper cable entry, danger board, feeder identification marks, rigid inter connections, cadmium plated bolts and nuts and shall be installed on performed trench and consisting of the following as required and as per IS standards for main panel. Panel shall be manufacture only from CPRI approval Fabricators. 500A Aluminium Bus Bar with colour code. (0.8A/ Sqmm). Internal wiring with approved make cable Earthing Flat: Providing suitable G.I Flat Incomer: 400 A 35/36 KA 4 pole MCCB confirms to IS having over load, shot circuit and earth fault Protection of make L&T/Siemens/ Schneider -1 NO Labour charges for errection of switch gear, panel board, Control wiring including all labour charges etc complete with connections for finished item of work including transportation charges. The panel board drawings shall be approved before fabricating the Panel board from the competent authority.As per quoatation .

Painting to walls with 2 coats of acrylic exterior emulsion paint of approved brand and shade after thoroughly brushing the surface to remove all dirt and ramains of loose powdered material, including cost and coveyance of all materials to work site and all operational, incidental, labour charges etc,. complete for finished item of work

Providing skirting of intenal wall to 10 cm height/riser of red mandanna stone of size 2x2 with the of 16 to 18mm stone cladding, including complete for finished item of work including cost and conveyance of all materials complete for finished item of work

Providing ornamental band Plastering with haunch at corner of flooring and wall with CM (1:2) with smooth finishing on top etc., including cost and conveyance of all materials and Labour charges etc., complete.

Painting with synthetic enamel paint for New Iron work with 1 coat Zinc Chromate Yellow oxide and 2 coats of of approved brand and shade after throughly brushing the surface to remove all dirt and remains of loose powdered materials, including cost and conveyance of all materials to work site and all operational, incidental, labour charges etc., complete for finished item of work as per SS 911 For New Iron Work

Earth work excavation for foundations and depositing on bank for all lifts and with an initial lead of 10m including all operational, incidental, labour charges such as shoring ,sheeting, planking, strutting, etc. complete for finished item of work including seigniorage excluding dewatering charges etc as per SS - 20 B (APSS 308).

P.C.C (1:5:10) prop. Using 40mm HBG machine crushed metal and sand including cost and conveyance of all materials to site from approved source, Centering machine mixing & vibrating, laying concrete in position, tamping curing for required period, labour charges for all items all other incidental and operational charges etc., complete as per standard specification and as directed by departmental Engineer for finished item of work

Filling with Carted Gravel in trenches, sides of foundations basement from approved quarry consolidating deposited layer by watering and ramming, including all operational, incidental, labour charges, complete including cost and conveyance of sand / gravel for finished item of work.

Solid Fly-ash Block masonry 230 mm thick for panel walls in super structure, parapet walls with cement mortar (1:6) prop (Cement:sand) using solid fly-ash blocks of size 290 x 230 x 140 mm for manufacturing of flyash solid blocks from approved source having minimum crushing strength of 5 N/sq.mm. including cost and conveyance of all materials like cement, sand, bricks, water etc., to site,cost of excluding seigniorage on all materials and all incidental and operational, labour charges like mixing cement mortar, scaffolding charges, constructing masonry, lift charges, curing etc., complete for finished item of work as per SS 504. for:-Fly Ash Block Masonry in CM 1:6 (290x230x140)

VCC M20 Naminal mix using 40mm & 20mm size (SS5) hard granite machine crushed graded metal (Coarse aggregate) from approved quarry. Using a minimum quantity of 350 Kgs. Of cement per 1Cum of concrete including cost and conveyance of all materials like cement, fine aggregate (Sand), coarse aggregate, water etc., to site and cost and all other taxes on all materials including steel centering, shuttering machine mixing, laying concrete, vibrating, lift charges etc., complete.

Providing dish finishing to the C.C. Surface for having good compaction of CC Surface and to have smooth surface of the road including cost and conveyance of all materials, hire charges of dish and fan, incidental and operational and labour chargesetc., complete for finished item of work as per Standard Specification and as directed by the Department Engineer-inchaarge.

Plastering with C.M (1:5) 12mm thick including cost and conveyance of all materials to site from approved sources, including providing and removing necessary scaffolding, seignior age charges of all materials, labour charges, curing with all water leads and finishing smooth to perfect plumb including all other incidental and operational charges etc., complete as per standard specification and as directed during execution by departmental officers.

Painting to walls with 2 coats of acrylic exterior emulsion paint of approved brand and shade after thoroughly brushing the surface to remove all dirt and ramains of loose powdered material, including cost and coveyance of all materials to work site and all operational, incidental, labour charges etc,. complete for finished item of work

Supply and fixing of 25mm dia 1.8mm thick P.V.C. Pipe (ISI MARK) concealed in wall with all required accessorice including masonary work for light, fan and separate plug point with well seasone metalic box incluidng all labour charges etc.,

Wiring with run of 2 of 22/0.3mm (1.5 Sqmm) FRLS / HFFR / ZHFR PVC insulated flexible ISI mark copper cable in existing PVC conduit pipe including Supply and fixing of Jumbo Ceiling rose and 6A/10A ISI Mark 1way Modular switch with required modular box and cover frame in existing Surface or Concealed pipe wiring including cost and conveyance of all material and all labour charges etc., complete for light and bell points in N.R.B.Light Point

Wiring with run of 2 of 22/0.3mm (1.5 Sqmm) FRLS / HFFR / ZHFR PVC insulated flexible ISI mark copper cable in existing PVC conduit pipe including Supply and fixing of Jumbo Ceiling rose and 6A/10A ISI Mark 1way Modular switch with required modular box and cover frame in existing Surface or Concealed pipe wiring including cost and conveyance of all material and all labour charges etc., complete for light and bell points in N.R.B.Fan Point

Supply and fixing of batten holder / slanting holder in lieu of ceiling rose of light point complete with all connections and all labour charges with 7W LED, 490Lumens bulb (for new installation).Holder Make: Anchor / Gold Medal Olive / Million Zoom LAMP Make:Phillips / OSRAM / GE / Crompton.

Supply and fixing of 6A/10A ISI Mark 3/2 pin Modular socket with 6A/10A 1way Modular switch, 3 Module box with cover frame on a Common switch board including cost and conveyance of all materials and all labour charges etc., complete in N.R.B. / R.B.

Supply and fixing of 16A/20A ISI Mark 3/2 pin Modular socket with 6A/10A 1way Modular switch, 3 Module box with cover frame on a Common switch board including cost and conveyance of all materials and all labour charges etc., complete in N.R.B. / R.B.

Supply and fixing of DB with 1 No 20A single phase plug and Socket, in sheet steel enclosure with 1 No 10A to 20A 10 KA SP MCB including internal connection and labour charges for Flush Mounting etc., complete.

Supply and fixing of Modular type Stepped electronic regulator for sweep AC ceiling fans of 900mm / 1200mm / 1400mm.

Supply and fixing of 20-24W, not less than 1100mm length LED batten light with extruded aluminum housing and polycarbonate cover, input voltage AC 220 - 260 Volts, with high power LEDs, having System Efficacy of >=90 lumens/watt , PF>0.9, Surge protection: 2KV, THD<15%, with inbuilt driver and frosted cover CCT: 3000K - 5700K, minimum CRI>70, etc., complete with earth connection and not less than two years warranty.Makes: As per list of recommended brands as category II (MAT-03348)

Supply and fixing of 18 W LED surface Panel round suitable for surface mounting down light made of poly corbonate 39 L x 155Wx159H millimeter dimesions 1800 lumunes and 100 lumunes per watt efficiency etc., complete with earth connections and not less than 2 years warranty.

Supply and Run of 2 of 56/0.3mm (4.0 Sq.mm) FRLS / HFFR / ZHFR PVC insulated flexible ISI mark copper cable in existing pipe for run of mains inlcuding all labour charges etc., complete

Supply and Run of 2 of 36/0.2mm (2.5 Sq.mm) FRLS / HFFR / ZHFR PVC insulated flexible ISI mark copper cable in existing pipe for earth continuity inlcuding all labour charges etc., complete.

Supply and Run of 1 of 22/0.3mm (1.5 Sq.mm) FRLS PVC insulated flexible ISI mark copper cable in existing pipe for earth continuity inlcuding all labour charges etc., complete.

Supply and Run of 1 of 14/0.3mm (1.0 Sq.mm) FRLS PVC insulated flexible ISI mark copper cable in existing pipe for earth continuity inlcuding all labour charges etc., complete.

Supply and fixing of 12 Way SPN DB with IP 43 Protection as per IS:13032 and suitable for 4 Nos S.P out goings and for 1 No Incommer including Supply and Fixing of 1 No 40 A DP Isolator and 4 Nos 6-32 A 10kA SP MCBs with internal connections and all labour charges etc., complete for FLUSH Mounting .

Supply of 48" (1200mm) Sweep 5 star rated BLDC (Brush less Direct Current) Ceiling Fan with double ball bearings, input voltage 230V AC converted to 24 V DC, power input not more than 30W, air delivery not less than 220 cubic meter/min and a minimum service value of 7.0, with remote and without Regulator. Makes: As per list of recommended brands MAT- 05508

Rewinding of Heavy-duty Exhaust fan motor including all necessary material, The motor is to be wound taking no. of coils, turns and pitch as it was originally wound with required size super enameled wire with 'E' class insulation.300/ 380 mm sweep.300/ 380 mm sweep

Providing independent earthling by excavating a trench to a depth of 1.50 M in all soils, as per size specified in the Data, using 20mm dia GI pipe of 1.20 Mtrs length and 2.50 sqmm copper wire 3.00 mts with necessary accessories with hume pipe ring duly providing staggered holes with hard coke and salt layers. As per Standard data 5.1.1

Supply and run of 2 of 6 Sqmm FRLS P.V.C insulated flexible copper cable in existing pipe for mains including all labour changes etc., complete

Supply and transportation of 50W LED Street light Luminaire made of pressure diecast aluminum body with powder coated, having protective toughened glass/ temperature protective polycarbonate diffuser, supply input voltage 120 - 270V AC, P.F > 0.90, high power LEDs having System Efficacy >=120 lumens/watt and junction temperature < 70°C, with Ingress protection IP66, Luminaire performance complies to IS 10322 (Part 5/Sec- 3), driver surge protection 4KV, in-house additional Surge protection 10 KV with optics distribution, THD<10% at 110 Volts AC, driver efficiency >90%, CCT: 3000K - 5700K, minimum CRI>70, etc., complete with earth connection and not less than two years warranty. Makes: As per list of recommended brands as category I.MAT-03363

Supply and run of 4 of 10 Sqmm FR P.V.C insulated flexible copper cable in existing pipe for mains including all labour changes etc., complete

Supply of 8 way VTPN DB suitable for accomidating 125 A / 160 A 4 pole MCCB as incomer and 8 Nos TP MCBs as out going and with IP 43 protection as per Sl.No.453 of Elec Make: Legrand / Schneider

Supply installation testing and commissioning of 4 pair 23AWG Cat-6 UTP, flexible, double ended LSZH patch cords along with 2 nos of RJ 45 connectors with strain relief boots Compatible to T568A,T568Bspecifications including making connections to information outlets. Makes: As per list of recommended brands as Category I.MAT-04157 9 (a)