Construction of HYDT, Lowering of submersible motor, supply, fitting and fixing of pipe fittings, GI Galvanised Structure PVC Tank required for water supply in campus of NIrsa Polytechnic

HYDT : Cost of drilling 200mm X 165mm X 250 Mtr deep bore well in all kinds of soil and rock in rural area for installation of pump bore set with Hydraulic DTH Rig machine, all complete including supplying all materials, tools, drilling rig, Air Compressor and equipments, as well as fuel, lubricants and cost of transportation of Rig machine and other vehicles up to the site.

(a) 0.00m Up to 50.00m depth below G.L. In Rural Areas

(b) Above 50.00 m depth. In Rural Areas

Supplying all tools, tackles & lowering of 200 mm dia MS ERW casing pipe of 6mm wall thickness including welding charges, cost of pipe etc. all complete job.

Supplying all materials, labour, tools & equipments for fitting & fixing 200mm dia MS cap over casing pipe complete job.

Supplying installing is to be bore well & commissioning Submersible Motor-Pump set of Kirlosker/ Mather & plate /Jyoti /KSB make as per IS 1520/1980 coupled with 220 V, single phase, 50 Hz AC and wet type winded submersible motor pump set, with panel board having voltmeter, ammeter, phase indicating lamps, starters, including all taxes and transportation to work site etc. as per specification and direction of E/I. (Note - The capacity of pump motor will be provided as per Actual discharge of HYDT).

Submersible pump set 100mm dia (with Polypropylene/Noryl Impeller) upto 24 stages 2.0 HP (1W+1S)

Cost for supply of 40 mm dia PVC pipe (of approved make excluding lowering of pipe in bore including all taxes and transportation to work site etc. as per specification and direction of E/I.

Supplying and fixing DOL Starter with SS Encloser with 380/415 volt coil 5HP.

Cost of PVC insulated copper submerssible cable of FINOLEX or equivalent make including lowering and making water proof joints including all taxes and transportation to work site etc. as per specification and direction of E/I. Specification-XLPE/ PVC insulated 3 core 2.5 sq. mm

Cost for supply and laying of 40 mm dia GI pipe (of approved make ) including all taxes and transportation to work site etc. as per specification and direction of E/I.

Earth work in excavation in foundation trenches in hard soil (Vide Classification soil item B) and disposal of excavated earth as obtained to a distance up to 50 Mtr. including all lifts, leveling, ramming the foundation trenches, removing roots of trees, shrubs all complete as per approved design, specification and direction of E/I.

Providing and fixing HDPE container Syntex or alike one piecemolded water tank made out of low density polythyler andbuilt corrugation including of delivery up to destination hoisting and fixing of accessories such as inlet, outlet overflow of all tanks capacity 2000.00 litres Capacity Water storage Tank PVC Tank - 2000 Ltr

Galvanised Structure Providing structural steel galvanised tubular hollow section work in trusses, other similar trussed purlins and members with all bracing ,gusset plates etc as per detailed design and drawing or as directed by Engineer- in-charge ,including cutting fabricating ,hoisting , erecting and fixing in position , making riveted/bolted /welded connections and one coat of anticorrosive paint etc complete

50 mm dia CPVC pipe

32 mm dia CPVC pipe

32 mm dia GI Elbow

Submersibble Cable 2.5 sq mm 3 core F.R. PVC insulated

Rope 25mm dia

GI Tee 32 mm dia

GI Union 50 mm dia

GI Nipple 50 mm dia

GI Union 32 mm dia

GI Nipple 32 mm dia - 4"

GI Socket 32 mm dia

32 mm dia UPVC pipe

Supplying and fixing GI/UPVC/PVC fittings of approved make all complete as per specification and direction of E/I.

Add Labour cess- 1%