Loading
Loading…
Loading…
Tender Value
Refer Docs
EMD Value
₹19.4 L
Closing Date
17 Aug 2026, 9:30 pm
Karnataka Industrial Areas Development Board
Assistant Executive Engineer-Ele
08022267905
Providing Power Infrastructure to Nandur Kesartagi Industrial Area, 3rd Phase, Kalaburgi Taluk & District.
KIADB/2026-27/EL/WORK_INDENT475
KIADB/2026-27/EL/WORK_INDENT475
Open
Electrical
Two Tender Document System(Two Cover)
KIADB Head Office Bangalore
3 documents required · 3 mandatory
To qualify for award of this contract, each Tenderer in its/his name should have in the last five years period i.e. (2021-22 to 2025-26)Mandating satisfactory completion as a prime contractor for at least One Similar Nature of Electrical work involving such as Providing Electrical Infrastructure Facilities, to an extent of not less than 50% of the amount put to tender (i.e., Rs.968.00 lakhs). (Work executed and work done certificates issued under Joint Venture shall not be considered)
Executed in any one financial year, the following minimum quantities of work (Supply & Erection) (80% quantity of work put to tender): Certificates of proof shall be enclosed from competent Authority not below the rank of Executive Engineer in Government / Public Sectors/Government Undertaking Organizations. (Quantities executed certificates issued under Joint Venture shall not be considered). (1) 11kV PCVCB/MCVCB panel : 3.20 Nos, (2) 8mtr/9mtr/9.5Mtr long RCC pole/ DP Structure : 1044.00 Nos, (3) 11kV 3Cx400sqmm XLPE HTUG cable : 18.72 Km, (4) Compact RMU- 1way/5way : 18.00 Nos (5) Providing Rabbit/Coyote ACSR conductor : 136.80 Kms. (6) 11kV/433V 250KVA DTC : 27.00 Nos.
Each Tenderer should further demonstrate: Availability by owning at least 50% of the required / specified key and critical equipment for this work. The remaining 50% can be deployed on lease / hire basis for all works provided, the relevant documents (commitment agreements etc.,) for availability for this work are furnished : (Furnish details of plant / machinery / equipment etc.,)Tenderer shall have own ladder mounted jeep vehicle, excavator & crane (Hydra) 10 Ton Capacity on lease / Hire basis. Tenderer should enclose all relevant documents with technical bids as evidence.
Tenderers who meet the above specified minimum qualifying criteria, will only be qualified, if their available tender capacity is more than the total tender value. The available tender capacity will be calculated as under: Assessed available tender capacity: (AxNx1.5 - B), where, A: Maximum value of Electrical engineering works executed in any one year during the last five years (updated to 2026-27 price level) taking into account the completed as well as works in progress. N: Number of years prescribed for completion of the works for which tenders are invited. B: Value, at 2026-27 price level, of existing commitments and on-going works to be completed during the next 11 Months
To qualify for award of this contract, each Tenderer in its/his name should have in the last five years period i.e. (2021-22 to 2025-26) Achieved in at least two financial years a minimum financial turnover of Rs.3872.00 Lakhs. (Electrical Contract Works) (Not less than 2 times the amount put to tender)
Each Tenderer should further demonstrate: liquid assets and /or availability of credit facilities of not less than Rs.580.80 lakhs (Credit lines/ letter of credit/ certificates from Public sector banks/Nationalized Banks (as per RBI guidelines) not less than 30% of the amount put to tender for meeting the fund requirement etc)
₹7,500
₹19.4 L
18 Jul 2026
18 Jul 2026
18 Aug 2026
29 Jul 2026
30 Jul 2026
Providing Power Infrastructure to Nandur Kesartagi Industrial Area, 3rd Phase, Kalaburgi Taluk & District.
Supply of 11 kV PCVCB, 500 MVA, 25 kA, 1250 A incomer 800 A feeder Feeder Panel for capacitor bank with all lead and lifts complete as per specifications and directions of engineer in charge.
Supply of Annunciator Panel for 1I/c + 4F + 1CB with all lead and lifts complete as per specifications and directions of engineer in charge.
Supply of 19Core 2.5sqmm Control Cable with all lead and lifts complete as per specifications and directions of engineer in charge.
Supply of 10Core 2.5Sqmm Control Cable with all lead and lifts complete as per specifications and directions of engineer in charge.
Supply of 4 core 6sqmm Control Cable with all lead and lifts complete as per specifications and directions of engineer in charge.
Supply of 2 core 6 sqmm Control Cable with all lead and lifts complete as per specifications and directions of engineer in charge.
Supply of 4core 2.5sqmm Control Cable with all lead and lifts complete as per specifications and directions of engineer in charge.
Supply of Earthing name plate & DP feeder name plates including printing of letters painting and board for new earthing pits with stack ( 1 DP earthing name plate & 1 for feeder name plate) with all l...
Supply of Rubber mats 1000mm x 2000mm x 12mm size tested for 15kV class with all lead and lifts complete as per specifications and directions of engineer in charge.
Supply of Earth bond 450mm long with all lead and lifts complete as per specifications and directions of engineer in charge.
Supply of Drake ACSR conductor with all lead and lifts complete as per specifications and directions of engineer in charge.
Providing DP Pole Structure at the Tapping Point Using RCC Pole with all connected accessories with all lead and lifts complete as per specifications and directions of engineer in charge.
Supply of RCC Pole - 9.5 Mtr Long, 350 Kg WL for 33kV lines with all lead and lifts complete as per specifications and directions of engineer in charge.
Erection, alignment and fixing to the foundation, indoor/outdoor 11 kV switchgear panel/unit including movement from the point of unloading to the point of erection with all lead and lifts complete as...
Erection of control panel, auxiliary panel, carrier cabinet, marshalling bay kiosketc., alignment and fixing properly to foundation base including movement from the point of unloading to the point of ...
Grounding of equipment by providing cast iron pipe of 100 mm ID 13 mm thickness, 2.75 metre long with 2 part clamp out of G.I. Flat
50 X 6 mm continuously welded alround the pipe using cast iron weldi...
Grounding of equipment with 50 x 6 mm G.I. Flat and connecting equipment to the
earthmat /ground pit. Each point of earthing with all formation works like bending, twisting,
drilling of holes and conn...
Supplying & providing 450 mm dia 450 mm height 1.5 to 2 thick hume pipe collar (non pressure type) for earth pits with all lead and lifts complete as per specifications and directions of engineer in c...
Removing jelly before earth excavtion & & re-spreading jelly for laying back after back filling of soil(since separate labour charge(S) for jelly removing & respreading is not available in SR, labour...
Laying of control cables from rquipment to control panels & end terminals with all lead and lifts complete as per specifications and directions of engineer in charge.
Erection of RCC pole 9.5mtrs long, 300kg WL for 33kV lines with all lead and lifts complete as per specifications and directions of engineer in charge.
Testing, commisioning & wiring: Identification of wires, ferrulings, crimping & termination of wires for annunciation etc., testing of relays, CTs, PTs and breaker for operation with all lead and lift...
Wiring & assisting in testing & commissioning at 11kV indoor/outdoor switchgear with all lead and lifts complete as per specifications and directions of engineer in charge.
Wiring & assistinig in testing & commissioning at 11kV annunciation desk for 1 no of switchgear with all lead and lifts complete as per specifications and directions of engineer in charge.
Extension of 11KV switch gear panel bed:
Earth work excavation by manual means for drains, canals, waste weir, draft, approach channels, key trenches, foundation of Buildings & bridges and such simill...
Providing and laying in position Cement Concrete for levelling course for
all works in foundation. The granite/trap/basalt crushed graded coarse
aggregates and fine aggregates as per relevant IS Codes...
Providing and laying in position Cement Concrete for levelling course for
all works in foundation. The granite/trap/basalt crushed graded coarse
aggregates and fine aggregates as per relevant IS Codes...
Providing and removing centering, shuttering, strutting, propping etc and removal of form work for foundations footings, bases of columns for mass concrete including cost of all materials, labour with...
Providing size stone masonry with hard stone in foundation & plinth with cement mortar1:6 ( 1 cement 6 coarse sand) with all lead and lifts complete as per specifications and directions of engineer i...
Fabrication, supply & centering M S angular struss for all spans as per approved designs and drawings providing framed work, including cutting, hoisting, fixing in position and applying a priming coa...
Providing and laying to required line and slope roofing with corrogated asbeestos cement sheet 6mm thicj fixed with galvanized iron J or L hooks botls and nits 8mm dai CI plain and bitumen washers ov...
Providing and fixing structural steel work riveted, bolted or welded in bulk up sections, trusses and framed work, including cutting hoisting fixing in position and applying a priming coat of approved...
Refilling availble earth around trenches/ pipelines cables, in layers not exeeding 20cms in depth compacting each deposited layer by ramming after watering with all lead and lifts complete as per spec...
Supplying and fixing chemical earthing for grounding conduits, IC cutouts & other equipments backfills compinf which is non corrosive, thermally conductive potential to permissible limts, superior fau...
Supplying and running GI/copper conductor for grounding and ( along with other wires in conduit system of wiring) using necessary suitable size clamps nails guttas/spacers etc with all lead and lifts ...
Supply of DP Structure using RCC Pole - 9 Mtr
Long, 145 Kg WL (Including Cost of
Poles) with all lead and lifts complete as per specifications and directions of engineer in charge.
Supply of RCC Pole - 8 Mtr Long, 115 Kg WL with all lead and lifts complete as per specifications and directions of engineer in charge. for Stud
Supply of 11KV 400 amps GOS double break with all lead and lifts complete as per specifications and directions of engineer in charge.
Supply of ‘H’frame for mounting GOS with all lead and lifts complete as per specifications and directions of engineer in charge.
Supply of 11KV 70/90KN disc insulator with all lead and lifts complete as per specifications and directions of engineer in charge.
Supply of Guy Set Complete with No. 15 Strain
Insulator with all lead and lifts complete as per specifications and directions of engineer in charge.
Supply of spiral earth electrodes with all lead and lifts complete as per specifications and directions of engineer in charge.
Supply of 11kV, 45KN polymeric pin insulator with GI pins with all lead and lifts complete as per specifications and directions of engineer in charge.
Supply of Strain Clamp, 3 Bolt type for Disc Insulator with all lead and lifts complete as per specifications and directions of engineer in charge.
Supply of PG clamps Coyote conductor with all lead and lifts complete as per specifications and directions of engineer in charge.
Supply of Fish Plate with necessary Clamps, bolts & nuts etc complete (Galvanised) with all lead and lifts complete as per specifications and directions of engineer in charge.
Supply and fixing Anti - climbing device 12 Mtrs barbed wire with all lead and lifts complete as per specifications and directions of engineer in charge.
Supply and fixing caution/Danger board with all lead and lifts complete as per specifications and directions of engineer in charge.
Supply of Earthing materials pipe type for
grounding (Single Electrode with
accessories) with all lead and lifts complete as per specifications and directions of engineer in charge.
Erection of DP Structure using RCC Pole - 9 Mtr Long, 145 Kg WL (Including Cost of
Poles) with all lead and lifts complete as per specifications and directions of engineer in charge.
Erection of RCC Pole - 8 Mtr Long, 115 Kg WL with all lead and lifts complete as per specifications and directions of engineer in charge. for Stud
Fixing Guy Set Complete with No. 15 Strain
Insulator with all lead and lifts complete as per specifications and directions of engineer in charge.
Fixing spiral earth electrodes with all lead and lifts complete as per specifications and directions of engineer in charge.
Fixing of 11 KV 400 A GOS double break with all lead and lifts complete as per specifications and directions of engineer in charge.
Fixing of ‘H’ frame for mounting GOS with all lead and lifts complete as per specifications and directions of engineer in charge.
Making of Earthing materials pipe type for grounding (Single Electrode with accessories) with all lead and lifts complete as per specifications and directions of engineer in charge.
Supply of 11kV, 3 Core HTUG XLPE Insulated
Cables as per IS-7098 (Part-2) 2011 with
following parameters & as per BESCOM
(a) Insulation manufactured through Dry
Cure, Triple Extrusion Si...
Supplying of Heat Shrinkable Indoor Type Cable Termination Kit for XLPE Cable with all lead and lifts complete as per specifications and directions of engineer in charge. 3Cx400sqmm
Supplying of Heat Shrinkable Outdoor Type Cable Termination Kit for XLPE Cable with all lead and lifts complete as per specifications and directions of engineer in charge. 3Cx400sqmm
Supplying of HT heat shrinkable straight through joint kit for 11KV 3 core 400 sqmm XLPE UG cable with all lead and lifts complete as per specifications and directions of engineer in charge.
Supply of manufacture sand for spreading and forming alround the UG cable with all lead and lifts complete as per specifications and directions of engineer in charge.
Supplying of Bricks for cable covering tiles with all lead and lifts complete as per specifications and directions of engineer in charge.
Supplying of ‘B’ class 100mm dia GI pipe for culvert crossing and cable raising with all lead and lifts complete as per specifications and directions of engineer in charge.
Supplying of route and joint indicating stone connected with MS anchor rods with all lead and lifts complete as per specifications and directions of engineer in charge.
Laying of UG Cables by Trenchless Technology (HDD) by adopting Horizontal Boring & Drawing of cable including preparation at site with all lead and lifts complete as per specifications and directions ...
Cable trench excavation in ordinary soil with all lead and lifts complete as per specifications and directions of engineer in charge.
Laying of high tension 11 KV(E) 3 core 400 sqmm in existing trench/GI pipe/stone ware/RCC Hume pipe using wooden aluminum rollers as directed by the departmental staff with all lead and lifts complete...
Refilling and consolidation with all lead and lifts complete as per specifications and directions of engineer in charge.
Making and fixing for 11 KV(E) 3 Core 400 sqmm heat shrinkable type pot head (indoor / out door) with all lead and lifts complete as per specifications and directions of engineer in charge.
Making and fixing for 11 KV (E) 3 core 400 sqmm heat shrinkable type straight through joint with all lead and lifts complete as per specifications and directions of engineer in charge.
Spreading and forming with sand all round the cable to a depth of 75mm and width of 500mm with all lead and lifts complete as per specifications and directions of engineer in charge.
Covering the tiles of 250X250X40mm for 3 core 400sqmm XLPE UG cable with all lead and lifts complete as per specifications and directions of engineer in charge.
Laying the GI pipe 80mm to 150mm dia at Drainage water supply crossing including fixing collars, bends tees and other fitting with cuts and threads wherever necessary with all lead and lifts complete ...
Fixing of route and joint indicating stone connected with MS anchor rods with all lead and lifts complete as per specifications and directions of engineer in charge.
Supply of Compact RMU (VCB/SF6 Type) with Copper Busbar, 350 MVA, 630 Amps as per IEC- 62271/IS-3427 with all lead and lifts complete as per specifications and directions of engineer in charge. 5 Way ...
Supply of Compact RMU (VCB/SF6 Type) with Copper Busbar, 350 MVA, 630 Amps as per IEC- 62271/IS-3427 with all lead and lifts complete as per specifications and directions of engineer in charge. 1 OD f...
Supplying fixing and wiring earth electrode for grounding of lifts, transformers, DG sets etc. using 40 mm dia 2.9 mm thick 2.5m long GI pipe with GI funnel with mesh and suitable size reducer fixed o...
Supplying & running of GI/Copper strips for grounding connections, using necessary fixing materials with all lead and lifts complete as per specifications and directions of engineer in charge. 50 x 6 ...
Earth Excavation for RMU Foundation Depositing of earth on Bank with all lead and lifts complete as per specifications and directions of engineer in charge.
Concreting with CC 1:2:4 [M-15] Using 20mm Nominal size graded crushed coarse aggregates with all lead and lifts complete as per specifications and directions of engineer in charge.
Supply of Providing Reinforecement TMT Fe 550/550 D with all lead and lifts complete as per specifications and directions of engineer in charge.
Supplying and fixing MS Rectangular Angle of size 65X65X6mm fixed in cement cocrete 1:2:4 with 2 numbers of 16mm dia MS holdfast rods for a length of 25cm including cost of all materials, bending, cut...
Fixing foundation frame of channels and angle iron welding fixing in concrete aligning the RMU on foundation bed, assembly of units, connecting Bus Bars from panel to panel initial filling of oil etc....
Fixing foundation frame of channels and angle iron welding fixing in concrete aligning the RMU on foundation bed, assembly of units, connecting Bus Bars from panel to panel initial filling of oil etc....
Lettering the RMU with enamel paint and also writing single line diagram of each panel, caution Board, Danger Board etc., including cost of Paint, Brush etc., with all lead and lifts complete as per s...
Supply of RCC Pole - 9 Mtr Long, 145 Kg WL with all lead and lifts complete as per specifications and directions of engineer in charge.
Supply of RCC Pole - 8 Mtr Long, 115 Kg WL with all lead and lifts complete as per specifications and directions of engineer in charge. for Stud
Supply of 11 kV, Horizontal Cross Arm with
clamps, HTST supports, bolts, nuts and washers for RCC Pole - 9 Mtr Long, 145Kg WL with all lead and lifts complete as per specifications and directions of e...
Supply of LT 4 Pin Cross Arm with clamps, bolts, nuts & washers with brace - MS for RCC pole with all lead and lifts complete as per specifications and directions of engineer in charge.
Supply of 11KV 70/90KN composite/polymeric insulator with all lead and lifts complete as per specifications and directions of engineer in charge.
Supply of 11 kV, 5 kN Polymeric Pin Insulator (24 mm dia FRP Rod) with all lead and lifts complete as per specifications and directions of engineer in charge.
Supply of 1.1 kV Ceramic Pin Insulator With GI pin with all lead and lifts complete as per specifications and directions of engineer in charge.
Supply of No. 8 Strain Insulator with all lead and lifts complete as per specifications and directions of engineer in charge.
Supply of Guy Set Complete with No. 15 Strain Insulator & Concreting materials with all lead and lifts complete as per specifications and directions of engineer in charge.
Supply of Spiral Earth Electrode with all lead and lifts complete as per specifications and directions of engineer in charge.
Supply of ACSR Coyote ACSR with all lead and lifts complete as per specifications and directions of engineer in charge.
Supply of Rabbit ACSR Conductor with all lead and lifts complete as per specifications and directions of engineer in charge.
Supply of PG clamp for Coyote conductor with all lead and lifts complete as per specifications and directions of engineer in charge.
Supply of PG clamp for Rabbit conductor with all lead and lifts complete as per specifications and directions of engineer in charge.
Erection of RCC Pole of 9 Mtr long, 145kg WL with all lead and lifts complete as per specifications and directions of engineer in charge.
Erection of RCC Pole - 8 Mtr Long, 115 Kg WL with all lead and lifts complete as per specifications and directions of engineer in charge. For stud.
Fixing of 11 kV, Horizontal Cross Arm with
clamps, HTST supports, bolts, nuts and washers for RCC Pole - 9 Mtr Long, 145 Kg WL with all lead and lifts complete as per specifications and directions of ...
Fixing of Guy Set Complete with No. 15 Strain Insulator & Concreting materials with all lead and lifts complete as per specifications and directions of engineer in charge
Providing Spiral Earth Electrode type earthing (without charcoal, salt etc.,) with all lead and lifts complete as per specifications and directions of engineer in charge
Stringing of ACSR Coyote Conductor with all lead and lifts complete as per specifications and directions of engineer in charge
Stringing of ACSR Rabbit conductor with all lead and lifts complete as per specifications and directions of engineer in charge
Supply of DP Transformer Structure using RCC Pole - 9 Mtr Long, 145 Kg WL with all lead and lifts complete as per specifications and directions of engineer in charge
Supply of 11 kV, 5 KN Polymeric Pin Insulator (24 mm Dia FRP Rod) with all lead and lifts complete as per specifications and directions of engineer in charge
Supply of 11 kV, 45 KN Polymeric Insulator with all lead and lifts complete as per specifications and directions of engineer in charge
Supply of Guy Set Complete with No. 15 Strain Insulator & Concreting materials with all lead and lifts complete as per specifications and directions of engineer in charge.
Supply of Distribution Transformer - 3 Phase,
11kV/433V - Stacked CRGO Core with
Oil as per IS-1180 (Part-1): 2014 with the
following Parameters:
(a) Core shall be of higher grade CRGO Steel
Supplying fixing and wiring earth electrode for grounding of lifts, transformers, DG sets etc. using 40 mm dia 2.9 mm thick 2.5m long GI pipe with GI funnel with mesh and suitable size reducer fixed o...
Supply of Caution/Danger Board with all lead and lifts complete as per specifications and directions of engineer in charge.
Supply of Anti Climbing Device (12 Mtr GI Barbed Wire) with all lead and lifts complete as per specifications and directions of engineer in charge.
Supply of GI Wire 8 SWG with all lead and lifts complete as per specifications and directions of engineer in charge.
Supply of Guy wire 7/10 SWG with all lead and lifts complete as per specifications and directions of engineer in charge.
Supply of Al Lead Wire - 240 Sqmm with all lead and lifts complete as per specifications and directions of engineer in charge.
Supply of Heavy Duty Long Barrel Copper Lug-240 Sqmm with all lead and lifts complete as per specifications and directions of engineer in charge.
Supply of PG Clamp - Rabbit to 240 Sqmm with all lead and lifts complete as per specifications and directions of engineer in charge.
Supply of Spacer for DTC Wiring with all lead and lifts complete as per specifications and directions of engineer in charge.
Supply of Fish Plate with necessary Clamps, bolts & nuts etc complete (Galvanised) with all lead and lifts complete as per specifications and directions of engineer in charge.
Supply of LT Metering box with CTs and necessary wiring for housing ETV Meter with all lead and lifts complete as per specifications and directions of engineer in charge.
Supply of LT Electronic Tri-Vector Meter 5 Amps, -0.5/1.0 Accuracy Class with all lead and lifts complete as per specifications and directions of engineer in charge.
Supply of 11 kV Lightning Arrester, Metal Oxide 10kV, 5 kA Polymeric type with ground disconnector with all lead and lifts complete as per specifications and directions of engineer in charge.
Supply of LT Distribution box for 250 kVA with 2 no MCCB (COMMON SR 2023-24 CDS-27)
Supply of 11 kV, Solid Core Type HG Fuse Unit with all lead and lifts complete as per specifications and directions of engineer in charge.
Supply of H-Frame for mounting GOS with all lead and lifts complete as per specifications and directions of engineer in charge.
Supply of 11 kV, 200 Amps, Single Break GOS with all lead and lifts complete as per specifications and directions of engineer in charge.
Labour charges for erection 11kV/433V, 250 kVA, 3 Phase, 50 Cys Distribution Transformer BEE - 5 Star Rated with oil with all accessories with all lead and lifts complete as per specifications and dir...
Providing Smart Surveillance System (CCTV): using PTZ & Fixed cameras, OFC monitoring system, HMI etc., as per specification PTZ Camera Specification: (a) Lens type: Auto focus with Optical Zoom of 30...
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
Bid Document.pdf
Tender Document • 1.01 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at [email protected].