Loading…
Loading…
| # | Company | Amount | Status |
|---|---|---|---|
| 1 | ₹1.9 Laccepted-aoc | accepted-aoc |
Tender Value
₹2.0 L
EMD Value
₹2,050
Closing Date
12 Feb 2026, 5:10 pmClosed
Executive Engineer, PRI Division, Ongole
O/o Executive Engineer, PRI Division, Santhapeta, Ongole.
Minor Repairs & Electrical Works and water Connection of Sisugruha, Ongole.
893690
Tender Notice No 06/2025-25, Dt 21-01-2026, Nit No 61/2025-26 Dt. 21-01-2025-26
OPEN - NCB
Civil Works
PRAKASAM, ANDHRA PRADESH
9 documents required · 9 mandatory
₹73
₹2,050
27 Feb 2026
29 Jan 2026
29 Jan 2026
Supply and run of 2 of 56/0.3mm (4 Sq.mm) FR P.V.C. insulated flexible copper cable in existing pipe for mains inlcuding all labour charges etc., complete.
Supply and run of 2 of 36/0.3mm (2.5 Sq.mm) F.R P.V.C. insulated flexible copper cable in existing pipe for mains inlcuding all labour charges etc., complete.
Wiring with 2 runs of 14/0.3mm (1.0 Sq.mm) Fire Retardant (FR) P.V.C. insulated flexible copper cable (ISI MARK) in existing pipe with 6A switch, (1way.1Module switch) Ceiling rose and 3mm thick hylam sheet covering to switch control box including all labour charges etc., complete for light, bell, fan and exhaust fan points in Non-Residential Buildings,
Wiring with 2 runs of 14/0.3mm (1.0 Sq.mm) Fire Retardant (FR) P.V.C. insulated flexible copper cable (ISI MARK) in existing pipe with 6A switch, Ceiling rose and 3mm thick hylam sheet covering to switch control box including all labour charges etc., complete for light, bell, fan and exhaust fan points in Non-Residential Buildings,(1way.1Module switch)
Supply, Installation and commissioning approved make floormounted Close coupled EWC suit CASCADE model 'P' or'S' trap with dual flush porcelain cistern fixed on EWC with all internal parts of dual flush cistern, ultra solid seat coverof approvedmake with rubber buffer and cap 15 mm angle stop cock 450 mm long PVC inter connection pipe wall flanges all of approved make etc. complete for finished item of work in all respects:White Colour
Providing & Placing on Terrace (at all floor levels) polyethylene water storage tank of Double layer Roto moulded confirming to IS:12701 approved brand & manufacture with suitable cover/cap and suitable locking arrangement & making necessary holes for inlet & outlets and over flow pipes but without fittings & base support for tanks
Providing and fixing 28 -30 MM thick solid Wood Polymer Composite(WPC) single extruded door shutter with 3MM top and bottom rigid layer with an overall density of 750kg/Cum. It will be fixed to the frame using 3 inch /4 inch hinges. A minimum of 4 hinges will be required for fixing the door of size 0.90 x 1.20 Mts, with the frame (BMT-N.92)
Providing and applying Synthetic plaster putty or plaster of paris putty or lime punning of average 1 to 2 mm thickness over plasteredsurfaceto prepare the surface even and smooth afterthoroughly brushing the surface to remove all dirt and remains of loose powdered materials,applying emery paper,sand the surface,clean & wipe off loose dust, applying knifing paste filler by putty knife/ muslin pad,air dry for 2-3 hrs, sand with 180 and 320 No., emery paper for the surface preparation including cost and conveyance of all materials to work site and all operational, incidental,labour charges etc.,completefor finished item of work for internal walls -10 Sqm.
Supply and Fixing of Premium make 110mm dia PVC/SWR Pipes and necessary Fittings including all etc complete.
Supply and Fixing of Premium make CPVC Pipes and Fittings to meet the requirement of ASTM-D 2846 and are produced in CTS (Copper Tube Sizes 1/2" ton 2" SDR 11 and SDR 13.5 pipes are made from idential CPVC compounds having the same physicalProperties for Hot and Cold Water (IS 15778:2007) for 28.60 mm dia
Supply and Fixing of Premium make CPVC Pipes and Fittings to meet the requirement of ASTM-D 2846 and are produced in CTS (Copper Tube Sizes 1/2" ton 2" SDR 11 and SDR 13.5 pipes are made from idential CPVC compounds having the same physicalProperties for Hot and Cold Water (IS 15778:2007) for 22.20 mm dia
Supply and Fixing of Premium make CPVC Pipes and Fittings to meet the requirement of ASTM-D 2846 and are produced in CTS (Copper Tube Sizes 1/2" ton 2" SDR 11 and SDR 13.5 pipes are made from idential CPVC compounds having the same physicalProperties for Hot and Cold Water (IS 15778:2007) for 34.90 mm dia
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
BOQItem.xlsx
TENDER_DOCUMENT • 0.25 MB
SBD Minor Repairs & Electrical Works and water Connection of Sisugruha, Ongole...doc
TENDER_DOCUMENT • 0.70 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .