REPAIR TO JOINERY , PLASTERING, FLOORING AND ALLIED FITTINGS AT BARAMULLA UNDER GE 969 EWS

Amount

Taking down shutters of any descriptin exc 1 Sqm and n.exc 2 Sqm each. Complete all as specified and directed by Engineer-In-Charge.

All as per item No. 1 above but n.exc 1.0 Sqm each. Complete all as specified and directed by Engineer-In-Charge.

Taking down frame with shutter of built in cup board. Complete all as specified and directed by Engineer-In-Charge.

Taking down chowkat or frames not exc 1.5 sqm each but with shutters (without taking off shutters from the frame) and matching the surface of dismantled area with existing surface. Complete all as specified and directed by Engineer-In-Charge.

Taking down chowkhats or frames exc 1.5Sqm but n.exc 4.00sqm each with shutters (without taking off shutters from the frame). Complete all as specified and directed by Engineer-In-Charge.

Taking down shutter exc 1.00sqm and n.exc 2.00sqm each & refixing in the same opening after resecuring or easing and adjusting shutters of any description complete. Complete all as specified and directed by Engineer-In-Charge.

M&L for solid PVC door frame of size 50mm x 47mm made out of 5 mm plain colour PVC sheet reinforced with MS square tube. Complete all as specified and directed by Engineer-In-Charge.

S&F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top and bottom rails MS frame shall be covered with heat moulded plain colour PVC channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail , lock rail and bottom rail on either side and as gap insert for top rail and bottom rail panelling of plain colour PVC sheet to be fitting in MS frame welded/sealed to the stiles and rails with suitable PVC sheet beading and jointed together with solvant cement supplying and fixing in the frame at site. Complete all as specified and directed by Engineer-In-Charge.

S&F steel windows with side hung shutters including box type hinges with steel handle made of flat iron 20 x 3 mm, 150mm long 01 Nos each leaf and 125mm MS tower bolt 2 Nos in each leaf and steel peg stay and tie rod of 10mm dia complete with glazing bars dovetailed or welded. Complete all as specified and directed by Engineer-In-Charge.

All as per Srl item No 9 above but without glazing bar. Complete all as specified and directed by Engineer-In-Charge.

M&L for framed work such as grills, gratings, door chowkats etc with ends of bars shoilded and or riveted or forged into spikes framed guard bars etc. Complete all as specified and directed by Engineer-In-Charge.

S&F 2nd class soft wood plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints including additional rebate for second shutter. Complete all as specified and directed by Engineer-In-Charge.

S & F 30mm thick 2nd class hard wood (Kail) glazed and skeleton shutter open rebated and prepared to receive glass, gauge etc divided in to squares with plain chamfered or rounded mitred and rebated sash bars any numbers edges of framing plain chamfered or rounded fitted with cut and mitred beads for securing glass etc sizes of members of shutters as specified ain SSR Part I section 8 clause 8.24 (b). Complete all as specified and directed by Engineer-In-Charge.

S&F 35mm thick, 2nd class hard wood rail and style plain framed paneled shutter (three panels) with 12mm thick BWP ply commercial on both faces . The size of rails and styles as per IS 1003 (Part-I) kiln seasoned and chemically pressure treated. Complete all as specified and directed by Engineer-In-Charge.

S&F 35 mm thick glazed/gauged and skeleton shutter 8 panels open rebated and prepaired to receive glass gauge etc without sash bars edges of framed/plain, champered or rounded, fitted with cut and mitered beads for securing glasses etc. size of members of the sutters as specified in SSR Pt-I Section -8 clause 8.24 (a) Supplied and fitted to chokhat, Complete all as specified and directed by Engineer-In-Charge. Note : The shutters shall be of eight panels.

S&F flush shutter 30mm thick solid core construction with block board core and ply wood face panels, commerials type on both side. Complete all as specified and directed by Engineer-In-Charge.

Taking down aluminium shutters/windows each panel and re-fixing the same opening after necessary repair, re-positioning the hinges, locks, etc. Complete all as specified and directed by Engineer-In-Charge.

S&F anodised aluminium powder coated frame work for partition, door/windows, aluminium section inlcuidng necessary jointing cleats, glazing clips, ruber neoprene packing, , anodised alumium snap beading screws etc, minimum weight 0.55 Kg per RM of aluminium section required. Complete all as specified and directed by Engineer-In-Charge.

S&F aluminium powder coated door shutter aluminimum section weighing 0.55 Kg/m including jointing cleats, glazing clips, ruber neoprene packing, , anodised alumium snap beading, screws etc. Complete all as specified and directed by Engineer-In-Charge.

S&F aluminium powder coated window and ventilator shutter , fixed type without sash bar, aluminimum section weighing 0.55 Kg/m including jointing cleats, glazing clips, ruber neoprene packing, , anodised alumium snap beading, screws etc.Complete all as specified and directed by Engineer-In-Charge.

S&F 100mm size butt hinges extruded aluminium alloy with galvanised mild steel hige pin, anodised and fixed type C-21. Complete all as specified and directed by Engineer-In-Charge.

S&F 75mm size butt hinges extruded aluminium alloy with galvanised mild steel hige pin, anodised and fixed type C-21. Complete all as specified and directed by Engineer-In-Charge.

S&F 100mm size butt hinges medium weight cold rolled mild steel fixed. Complete all as specified and directed by Engineer-In-Charge.

S&F 75mm size butt hinges medium weight cold rolled mild steel fixed. Complete all as specified and directed by Engineer-In-Charge.

S&F aluminium anodised barrel tower bolt 150 mm long. Complete all as specified and directed by Engineer-In-Charge.

S&F aluminium anodised barrel tower bolt 125 mm long. Complete all as specified and directed by Engineer-In-Charge.

S&F 125 mm size aluminum handle cast type. Complete all as specified and directed by Engineer-In-Charge.

S&F 150 mm size aluminum handle cast type. Complete all as specified and directed by Engineer-In-Charge.

S&F 300 mm long aluminium alloy anodised sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extuded sections or MS. Complete all as specified and directed by Engineer-In-Charge.

S & F in repairs aluminium powder coated 20 mm dia curtain rods with PVC brackets including making good disturbed surfaces. Complete all as specified and directed by Engineer-In-Charge.

S & F in repairs door closer, aluminium body, hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg. Complete all as specified and directed by Engineer-In-Charge.

S&F floor door stopper double leg of aluminium alloy body of 70mm length with aluminium base plate of size 50 mm x 40 mm. Complete all as specified and directed by Engineer-In-Charge.

S&F mild steel 300m ordinary rat tail rod pattern springs(Helical door spring) including roller and roller plate. Complete all as specified and directed by Engineer-In-Charge.

S&F mild steel work(Misc) as in hold fast, wall ties and similar articles conf to Fe-290 Gde-E-165. Complete all as specified and directed by Engineer-In-Charge.

S & F Continuous (piano) hinges flap width 30mm mild steel, bright finish or electro-galvanised. Complete all as specified and directed by Engineer-In-Charge.

S&F hasp and staple,100M safety type brass with mild steel hinge pin including bolt to hinge plate and fixed with screws. Complete all as specified and directed by Engineer-In-Charge.

M&L for preparation of new wood/wooden base surfaces of any discription not otherwise descrived over 10 cm width or girth and applying two coats of syenthitic enamel paint over a coat of pink primer.

All as per item No.37 above but two coats of synthetic enamel paint on steel surfaces over a coat of red oxide primer.

S&F in repair galvanised mild steel wire cloth, 0.45 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with tinned tacks, or galvanised wire staples. Complete all as specified and directed by Engineer-In-Charge.

S&F galvanised mild steel wire cloth, 0.45 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with tinned tacks, or galvanised wire staples. Complete all as specified and directed by Engineer-In-Charge.

S&F in repair 12 mm thick particle board medium denacity flat pressed single layer type or three layer type with BWR type adhesive fixed with screws to timber frame work as in pelmet boxes. Complete all as specified and directed by Engineer-In-Charge.

Hacking out old broken glass any thickness size quality or discription from metal frame incluidng punching or drilling out old frame. Complete all as specified and directed by Engineer-In-Charge.

M&L for sheet glass 4mm thick ordinary quality and glazing with oil putty n.exc 0.5 Sqm in each pane. Complete all as specified and directed by Engineer-In-Charge.

M&L for sheet glass 5mm thick ordinary quality and glazing with oil putty exc 0.5 Sqm in each pane. Complete all as specified and directed by Engineer-In-Charge.

M&L for welding in repair of existing door/window frames/chowkats/shutter and welding to builders hardware fixed with frame like hinges, tower bolt etc in any length/ thickness of metal. Complete all as specified and directed by Engineer-In-Charge.

Dismantling timber scantling 40 sq cm and over in section in any position as in unframed work, Complete all as specified and directed by Engineer-In-Charge.

M&L for 2nd class soft wood (kail) as in scantling clean sawn , fixed in repairs to replace old and decayed timber (including piecing, scarifying of old and new timbers if required). Complete all as specified and directed by Engineer-In-Charge.

All as per Srl item No. 47 above but except timber.

Disamantling unframed work in fillets, rails, posts, rafters, purlins, etc under 40 sqcm in section. Complete all as specified and directed by Engineer-In-Charge.

M&L for plain fillets, square rectangular or triangular in section wrought, secured with nails or brad, 2nd class soft wood (kail) sectional area exc 13 sqcm but not exc 25 sqcm as in cover fillets complete , Complete all as specified and directed by Engineer-In-Charge.

M&L for plain fillets, square rectangular or triangular in section wrought, secured with nails or brad, 2nd class soft wood (kail) sectional area exc 3 sqcm but not exc 6 sqcm as in cover fillets complete , Complete all as specified and directed by Engineer-In-Charge.

Dismantling wall and ceiling boards (fibre, pulp, insulation etc) or insulation boards/slabs/blankets, any thickness, including cover fillets Complete all as specified and directed by Engineer-In-Charge.

S & F for 6mm thick veneered decorative plywood,grade 1 (with BWR resin) with decorative face veneers on one face fixed with nails to timber frame work in wall Complete all as specified and directed by Engineer-In-Charge.

S & F for 6mm thick veneered decorative plywood,grade 1 (with BWR resin) with decorative face veneers on one face fixed with nails to timber frame work in ceiling Complete all as specified and directed by Engineer-In-Charge.

S&F wooden wall panelling with tongued & grooved joint laminated over high quality DHF, 8 mm to 10mm thick fixed to timber frame work. Complete all as specified and directed by Engineer-In-Charge.

Dismantling boarding of any description, fixed in any position with nails including cover fillets, Complete all as specified and directed by Engineer-In-Charge.

S&F 2nd class soft wood (kail) as in weather boarding, clean sawn, plain 20 to 25mm thick or feather edged 15mm to 20mm thick to give 20mm laps and fixed with 30mm laps, Complete all as specified and directed by Engineer-In-Charge.

M&L for 20mm thick eaves board of 2nd class soft wood (Kail), planed one side with butt joints, fixed with nails, Complete all as specified and directed by Engineer-In-Charge.

S&F for preparing for repair for 8mm thick prelaminated wooden flooring including and laid over existing concrete surgace by the manufacturer as approved by the GE in writing in a manner and providing the items as specified below (a) 125 micron polythene sheet ( as vapour barries) laid over existing concrete surface including taking all necessary steps to make the levelness and smoothness of existing concrete surface and achieve moisture free condition. (b) 5mm thick thermocole sheet over polythene sheet. (c) 8mm thick prelaminated wooden flooring. Complete all as specified and directed by Engineer-In-Charge.

Demolition of cement concrete (un-reinforced) in ground floor and paving n.exc 15cm thickness (below or ground level). Complete all as specified and directed by Engineer-In-Charge.

M&L for roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust etc. Complete all as specified and directed by Engineer-In-Charge.

Dismantling floor hearth or wall tiling including cement mortor bedding (but not backing ) removing serviceable tiles to store and rubbish off the premises. Complete all as specified and directed by Engineer-In-Charge.

Taking down cement plaster on brick or stone walls,etc. including raking joints,hacking for key, scrubbing down with water etc. Complete all as specified and directed by Engineer-In-Charge.

M/L for 75 mm thick Cement concrete 1:4:8 type D-2, (using 40 mm graded crushed stone aggregate) as in sub base. Complete all as specified and directed by Engineer-In-Charge.

M&L for screed bed or bedding layer of mortar 15mm thick to CM 1:6 as under floor tiles. Complete all as specified and directed by Engineer-In-Charge.

M&L for rendering 10mm thick on fair faces of brick work or concrete surfaces in CM 1:4 finished fair and even under vertical tiles. Complete all as specified and directed by Engineer-In-Charge.

M&L for coloured non skid ceramic tiles 7 to 8mm thick (square/ rectan gular) area of each tiles exc 0.06 sqm but n.exc0.11sqm, 8mm thick,as in floors etc.set and jointed in neat cement slurry and pointed in white or coloured cement to match. Complete all as specified and directed by Engineer-In-Charge.

All as per srl item No. 67 above but jointless tiles area of each tiles exc 0.18sqm but n.exc 0.38sqm as in floors.

All as per srl item No. 68 above but as in skirting.

M&L for vitrified Ceramic coloured (any colour) light shade tiles 9-10 mm thick (square/rectengular) polished, area of each tile exc 0.18 sqm and n. exc 0.36 sqm as in floors, set and jointed in neat cement slurry and pointed in coloured cement to match the surface , Complete all as specified and directed by Engineer-In-Charge.

All as per srl item No. 70 above but as in skirting.

M&L for coloured glazed ceramic tiles in vertical surface 450x350 X 7 mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match. Complete all as specified and directed by Engineer-In-Charge.

M&Lfor granite (of any type) 18 to 20 mm thick (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite. Complete all as specified and directed by Engineer-In-Charge.

Supply only glass dividing strips 3mm thick 38mm wide. Complete all as specified and directed by Engineer-In-Charge.

M&L for 40mm thick cement concrete type B-1, 1:2:4( 20mm graded aggrega te) finishing cement concrete surface even and smooth using extra cement. Complete all as specified and directed by Engineer-In-Charge.

M&L for 75mm thick cement concrete type C-2, 1:3:6(40mm graded aggrega te) as in plinth protection finishing cement concrete even and fair without using extra cement making 10mm wide joints at each corner and at 3.00 mtr interveal filling the same with mestic filling i.e one part of bitumen 85/25 and 3part of sand. Complete all as specified and directed by Engineer-In-Charge.

Demolition of brickwork of stone/boulder masonry, built in cement mortar inlcuding all quoins, arches, pillars etc, but excluding ashlar facings, dressed stonework and precast concrete articles.

M&L for brick work with sub class B bricks straight or curved on plan exc 6 m mean radius built in CM 1:6. Complete all as specified and directed by Engineer-In-Charge.

M&L for rendering 15mm thick on fair faces of brick work or concrete surfaces thick in CM 1:6 surfaces finished fair and even. Complete all as specified and directed by Engineer-In-Charge.

M&L for rendering 10mm thick plaster on concrete surfaces in CM 1:3 as in ceiling. Complete all as specified and directed by Engineer-In-Charge.

M&L for preparation of new plaster surfaces of walls and applying two coats of cement base paints over one coat of suitable primer to walls. Complete all as specified and directed by Engineer-In-Charge.

All as per srl item No .81 above but three coats of white wash on ceiling.

Dismantling of plain or corrugated steel sheeting , any gauge and thickness in roof covering including Nainital or similar pattern roof covering. Complete all as specified and directed by Engineer-In-Charge.

S&F 0.63 mm thick, coloured galvanized, corrugated mild steel sheeting with two corrugation side lap, fixed with coach screws and washers, in roofs,walls etc with grade of zinc coating 275 grams per square metre. Complete all as specified and directed by Engineer-In-Charge.

All as per Srl item No.84 above but except sheeting.

S&F 0.80 mm thick plain , colloured galvanised , mild steel sheeting , in ridges, hips, valley gutters, drip and straight flashing ( length and girth as fixed ) with grade of zinc coating 275 grams per square metre. Complete all as specified and directed by Engineer-In-Charge.

M/S GHULAM MOHD LONE AND CO

M/S HAJI MOHD ASHRAF SUMJI

M/S BHAT AND CO