Specification No.26/2020-21

Amount

Jungle clearance of scrub jungles and clearing the rubbish away from site.

Earth work excavation in hard gravelly soil with an initial lead of 10 m and lift of 2 m etc.for foundation

Supply and filling with gravel including cost of all materials, consolidation and labour etc. complete.

Supply and filling the basement with Msand for foundation and complete basement including watering consolidation etc.

PCC 1:4:8 using 40m HB stone for foundation including cost of al materials and labour etc., complete

PCC 1:1.5:3 using 40m HB stone for foundation including cost of al materials and labour etc., complete

Brick Work in Cement mortar 1:5 using Chamber Burnt Bricks of size 9" x 4.5" x 3" including cost of all materials,labour lead ,lift etc complete.

Plastering the walls with CM 1:5, 12mm thick including cost of al materials,labour.lead.lift etc complete.

Providing flooring with ellis pattern finishing of 20mm thick with cement concrecte 3 to 10mm chips & pointed with same mortor including cost of all materials, curing, etc., complete.

Distempering two coats with approved quality distember Including cost of all materials,lead,lift etc complete

Supplying and fixing of structural steel including cost of all materials, labour charges etc., complete.

Supplying and fixing 65mm dia GI pipe for shed columns including labour charges for cutting, welding and fixing with Galvalume roofing etc., as directed by the departmental officers

Supplying and fixing of Galvalume sheets with 0.5 mm thickness over the Roof and sides of shed including cost of all materials, labour charges etc., complete.

Supply and run of 2 of 1.5 sq.mm. (22/0.3) PVC insulated SC unsheathed copper conductor of 1100V gradeon 7/20 GI bearer wire for service connection mains.

Wiring with 2x1.5Sqmm PVC insulated SC unsheathed Cu conductor of 1100 V grade in suitable PVC rigid pipe on wall and ceiling with PVC accessories with TW switch box and 5 A F.T.switch with continuous earth wire connection of 14 SWG TC wire for open PVC light point/Fan Point.

Supply and fixing of 18W 4 feet LED fitting complete with TW round blocks on wall or ceiling with LED and PVC unsheathed copper leads from terminals to the fitting.

Wiring with 2x1.5Sqmm PVC insulated SC unsheathed Cu conductor of 1100 V grade in suitable PVC rigid pipe on wall and ceiling with PVC accessories with 150mm x100mm x113mm TW switch box with 3mm thick hylem sheet cover for 5A 3 pin non inter locking CS plug with continuous earth wire connection of 14 SWG TC wire for open PVC Plug point

Supply and fixing of 32A DP switch of 500 V with metal clad with fuse and neutral (sidehandle ) on suitable TW board with 32 A DP MCB.